net-mesh 0.23.0

//! Stateful daemon migration.
//!
//! Migration uses L4 `StateSnapshot` to move a daemon between nodes while
//! preserving causal chain continuity. The process is a 6-phase state machine.

use crate::adapter::net::state::snapshot::StateSnapshot;

/// Subprotocol ID for migration control messages.
pub const SUBPROTOCOL_MIGRATION: u16 = 0x0500;

/// Phases of daemon migration.
#[derive(Debug, Clone, Copy, PartialEq, Eq)]
pub enum MigrationPhase {
    /// Take snapshot on source node.
    Snapshot,
    /// Transfer snapshot to target node.
    Transfer,
    /// Restore daemon on target, start buffering events.
    Restore,
    /// Replay buffered events on target.
    Replay,
    /// Atomic routing cutover: new events go to target.
    Cutover,
    /// Cleanup source.
    Complete,
}

/// Structured reason the migration target rejected (or the
/// orchestrator aborted) a migration. Replaces the free-form
/// `reason: String` on `MigrationMessage::MigrationFailed` so the
/// source can dispatch programmatically on the cause — specifically,
/// distinguish "retry this, the target is still booting" (`NotReady`)
/// from "give up, the target doesn't know this daemon kind"
/// (`FactoryNotFound`).
///
/// See [`DAEMON_RUNTIME_READINESS_PLAN.md`](../../../../docs/DAEMON_RUNTIME_READINESS_PLAN.md)
/// for the retry-classification table.
#[derive(Debug, Clone, PartialEq, Eq)]
pub enum MigrationFailureReason {
    /// Target runtime exists but hasn't called `start()` yet — the
    /// dispatcher received the migration before the runtime was
    /// ready to accept one. **Retriable**: source should back off
    /// + resend.
    NotReady,
    /// Target has no factory registered for the daemon's
    /// `origin_hash` (supplied in the outer `MigrationFailed`
    /// envelope). **Terminal** — retrying won't help; the target
    /// is mis-configured (wrong node), the kind is wrong, or the
    /// daemon never registered.
    FactoryNotFound,
    /// Target doesn't run a compute runtime at all (a bare `Mesh`
    /// with no `DaemonRuntime` attached). **Terminal** — source
    /// should pick a different target.
    ComputeNotSupported,
    /// Generic snapshot / restore / state-machine failure. Carries
    /// a human-readable detail. **Terminal.**
    StateFailed(String),
    /// A migration is already in flight for the same origin.
    /// **Terminal** on the duplicate attempt — caller should not
    /// retry, and the currently-active migration should be allowed
    /// to run to completion.
    AlreadyMigrating,
    /// Identity envelope failure: signature didn't verify, seal
    /// open failed, etc. **Terminal** — tampering or misconfigured
    /// target X25519 key; retry won't fix it.
    IdentityTransportFailed(String),
    /// Source gave up after exhausting its `NotReady` retry budget.
    /// **Terminal** on both sides; carries the retry attempt count
    /// for operator diagnosis.
    NotReadyTimeout {
        /// Number of `NotReady` retries the source attempted before
        /// giving up. ≥ 1 because the first attempt always counts.
        attempts: u8,
    },
}

impl MigrationFailureReason {
    /// `true` iff the source should retry after a short backoff
    /// when it sees this reason. Today only `NotReady` qualifies —
    /// the others are terminal.
    pub fn is_retriable(&self) -> bool {
        matches!(self, MigrationFailureReason::NotReady)
    }

    /// 16-bit wire code. Separating the code from the payload lets
    /// the dispatcher's decoder match on the tag cheaply and the
    /// payload length on-line with the variant.
    pub fn code(&self) -> u16 {
        match self {
            MigrationFailureReason::NotReady => 0,
            MigrationFailureReason::FactoryNotFound => 1,
            MigrationFailureReason::ComputeNotSupported => 2,
            MigrationFailureReason::StateFailed(_) => 3,
            MigrationFailureReason::AlreadyMigrating => 4,
            MigrationFailureReason::IdentityTransportFailed(_) => 5,
            MigrationFailureReason::NotReadyTimeout { .. } => 6,
        }
    }
}

impl std::fmt::Display for MigrationFailureReason {
    fn fmt(&self, f: &mut std::fmt::Formatter<'_>) -> std::fmt::Result {
        match self {
            Self::NotReady => write!(f, "target runtime not ready yet"),
            Self::FactoryNotFound => {
                write!(f, "no factory registered on target for this daemon")
            }
            Self::ComputeNotSupported => {
                write!(f, "target does not run a compute runtime")
            }
            Self::StateFailed(msg) => write!(f, "state failed: {msg}"),
            Self::AlreadyMigrating => write!(f, "daemon is already migrating"),
            Self::IdentityTransportFailed(msg) => {
                write!(f, "identity envelope transport failed: {msg}")
            }
            Self::NotReadyTimeout { attempts } => {
                write!(f, "source gave up after {attempts} NotReady retries")
            }
        }
    }
}

/// State of an in-progress migration.
pub struct MigrationState {
    /// Origin hash of the daemon being migrated.
    daemon_origin: u64,
    /// Source node ID.
    source_node: u64,
    /// Target node ID.
    target_node: u64,
    /// Current phase (only mutable through transition methods).
    phase: MigrationPhase,
    /// Snapshot taken from source (set in Snapshot phase).
    snapshot: Option<StateSnapshot>,
    /// Monotonic instant when migration started. Pre-fix this
    /// was a `u64` of wall-clock nanoseconds, and `elapsed_ms`
    /// did `current_timestamp().saturating_sub(self.started_at)`
    /// — a wall-clock jump backward (NTP step, manual `date`,
    /// VM resume to an earlier moment) would saturate to `0`
    /// and report the migration as instantaneous, masking
    /// long-running stalls in operator dashboards. `Instant` is
    /// monotonic by contract and is unaffected by clock jumps.
    started_at: std::time::Instant,
    /// Monotonic instant when the current phase was entered.
    /// Used by operator tooling (Deck MIGRATIONS tab) to
    /// distinguish "stuck in Replay for 30 minutes" from
    /// "migration started 30 minutes ago" — the latter is
    /// expected for large daemons, the former signals a stall.
    phase_entered_at: std::time::Instant,
    /// Number of retry attempts this migration has accumulated.
    /// Bumped by callers that re-drive a failed step via
    /// [`Self::bump_retry`]; surfaced through the migration
    /// snapshot so operators can spot migrations cycling
    /// through transient failures without dropping into the
    /// per-daemon log.
    retry_count: u32,
}

impl MigrationState {
    /// Create a new migration.
    pub fn new(daemon_origin: u64, source_node: u64, target_node: u64) -> Self {
        let now = std::time::Instant::now();
        Self {
            daemon_origin,
            source_node,
            target_node,
            phase: MigrationPhase::Snapshot,
            snapshot: None,
            started_at: now,
            phase_entered_at: now,
            retry_count: 0,
        }
    }

    /// Set the snapshot and advance to Transfer phase.
    pub fn set_snapshot(&mut self, snapshot: StateSnapshot) -> Result<(), MigrationError> {
        if self.phase != MigrationPhase::Snapshot {
            return Err(MigrationError::WrongPhase {
                expected: MigrationPhase::Snapshot,
                got: self.phase,
            });
        }
        // Validate snapshot belongs to the daemon being migrated
        if snapshot.entity_id.origin_hash() != self.daemon_origin {
            return Err(MigrationError::StateFailed(format!(
                "snapshot origin {:#x} does not match daemon {:#x}",
                snapshot.entity_id.origin_hash(),
                self.daemon_origin,
            )));
        }
        self.snapshot = Some(snapshot);
        self.phase = MigrationPhase::Transfer;
        self.phase_entered_at = std::time::Instant::now();
        Ok(())
    }

    /// Mark transfer complete, advance to Restore.
    pub fn transfer_complete(&mut self) -> Result<(), MigrationError> {
        if self.phase != MigrationPhase::Transfer {
            return Err(MigrationError::WrongPhase {
                expected: MigrationPhase::Transfer,
                got: self.phase,
            });
        }
        self.phase = MigrationPhase::Restore;
        self.phase_entered_at = std::time::Instant::now();
        Ok(())
    }

    /// Mark restore complete, advance to Replay.
    pub fn restore_complete(&mut self) -> Result<(), MigrationError> {
        if self.phase != MigrationPhase::Restore {
            return Err(MigrationError::WrongPhase {
                expected: MigrationPhase::Restore,
                got: self.phase,
            });
        }
        self.phase = MigrationPhase::Replay;
        self.phase_entered_at = std::time::Instant::now();
        Ok(())
    }

    /// Mark replay complete, advance to Cutover.
    pub fn replay_complete(&mut self) -> Result<(), MigrationError> {
        if self.phase != MigrationPhase::Replay {
            return Err(MigrationError::WrongPhase {
                expected: MigrationPhase::Replay,
                got: self.phase,
            });
        }
        self.phase = MigrationPhase::Cutover;
        self.phase_entered_at = std::time::Instant::now();
        Ok(())
    }

    /// Mark cutover complete, advance to Complete.
    pub fn cutover_complete(&mut self) -> Result<(), MigrationError> {
        if self.phase != MigrationPhase::Cutover {
            return Err(MigrationError::WrongPhase {
                expected: MigrationPhase::Cutover,
                got: self.phase,
            });
        }
        self.phase = MigrationPhase::Complete;
        self.phase_entered_at = std::time::Instant::now();
        Ok(())
    }

    /// Force the phase to a specific value without validation.
    ///
    /// Used for multi-chunk snapshots where the orchestrator needs to advance
    /// past Snapshot without having the full snapshot for `set_snapshot()`.
    /// The target will validate the reassembled snapshot.
    pub(crate) fn force_phase(&mut self, phase: MigrationPhase) {
        self.phase = phase;
        self.phase_entered_at = std::time::Instant::now();
    }

    /// Check if migration is finished.
    pub fn is_complete(&self) -> bool {
        self.phase == MigrationPhase::Complete
    }

    /// Elapsed time in milliseconds since the migration was
    /// constructed. Backed by a monotonic `Instant`, so a system
    /// clock that jumps backward (NTP step, VM resume) does not
    /// reset this to `0`; long-running migrations stay observable
    /// in operator dashboards.
    pub fn elapsed_ms(&self) -> u64 {
        u64::try_from(self.started_at.elapsed().as_millis()).unwrap_or(u64::MAX)
    }

    /// Milliseconds since the current phase was entered. Same
    /// monotonic source as [`Self::elapsed_ms`]; resets on
    /// every phase transition.
    pub fn age_in_phase_ms(&self) -> u64 {
        u64::try_from(self.phase_entered_at.elapsed().as_millis()).unwrap_or(u64::MAX)
    }

    /// Number of retries this migration has accumulated.
    #[inline]
    pub fn retry_count(&self) -> u32 {
        self.retry_count
    }

    /// Increment the retry counter. Saturating at `u32::MAX`
    /// so a stuck retry loop never wraps to `0` and masks the
    /// retry pressure from operator dashboards.
    pub fn bump_retry(&mut self) {
        self.retry_count = self.retry_count.saturating_add(1);
    }

    /// Payload byte count of the snapshot once set; `None`
    /// while the snapshot phase is still in progress (or
    /// when the orchestrator advanced past Snapshot via
    /// `force_phase` without calling `set_snapshot`).
    pub fn snapshot_size_bytes(&self) -> Option<u64> {
        self.snapshot.as_ref().map(|s| s.state.len() as u64)
    }

    /// Get the daemon origin hash.
    #[inline]
    pub fn daemon_origin(&self) -> u64 {
        self.daemon_origin
    }

    /// Get the source node ID.
    #[inline]
    pub fn source_node(&self) -> u64 {
        self.source_node
    }

    /// Get the target node ID.
    #[inline]
    pub fn target_node(&self) -> u64 {
        self.target_node
    }

    /// Get the current phase.
    #[inline]
    pub fn phase(&self) -> MigrationPhase {
        self.phase
    }

    /// Get the snapshot (if taken).
    #[inline]
    pub fn snapshot(&self) -> Option<&StateSnapshot> {
        self.snapshot.as_ref()
    }
}

impl std::fmt::Debug for MigrationState {
    fn fmt(&self, f: &mut std::fmt::Formatter<'_>) -> std::fmt::Result {
        f.debug_struct("MigrationState")
            .field("daemon", &format!("{:#x}", self.daemon_origin))
            .field("source", &format!("{:#x}", self.source_node))
            .field("target", &format!("{:#x}", self.target_node))
            .field("phase", &self.phase)
            .field("has_snapshot", &self.snapshot.is_some())
            .finish()
    }
}

/// Errors from migration operations.
#[derive(Debug, Clone, PartialEq, Eq)]
pub enum MigrationError {
    /// Daemon not registered locally.
    DaemonNotFound(u64),
    /// Target node unreachable or refused.
    TargetUnavailable(u64),
    /// Auto-placement found no candidate node satisfying the
    /// daemon's capability requirements. Distinct from
    /// `TargetUnavailable(_)` which carries a specific failed
    /// target — auto-placement never has one to report. Pre-fix
    /// the auto path constructed `TargetUnavailable(0)`,
    /// surfacing "target node 0x0 unavailable" to operators when
    /// no specific node had ever been tried.
    NoTargetAvailable,
    /// Snapshot/restore failure.
    StateFailed(String),
    /// Migration already in progress for this daemon.
    AlreadyMigrating(u64),
    /// Attempted to advance from wrong phase.
    WrongPhase {
        /// Expected phase.
        expected: MigrationPhase,
        /// Actual phase.
        got: MigrationPhase,
    },
    /// Snapshot exceeds the maximum transferable size.
    SnapshotTooLarge {
        /// Actual size in bytes.
        size: usize,
        /// Maximum allowed size in bytes.
        max: usize,
    },
    /// Wire-driven event-buffering surface refused an insert because
    /// the per-daemon out-of-order pending buffer is at its byte or
    /// event-count cap. Source must back off; the migration is not
    /// failed but the offending event was not accepted.
    BufferFull {
        /// Current buffered event count.
        events: usize,
        /// Current buffered byte total (sum of payload lengths).
        bytes: usize,
    },
    /// Inbound migration message arrived from a peer that is not the
    /// recorded principal for this migration's role. The wire layer
    /// authenticates the session; this layer authenticates that the
    /// authenticated peer is actually a participant in the recorded
    /// migration (source / target / orchestrator). Mismatches are
    /// silently dropped at the dispatch boundary rather than acted on.
    WrongPeer {
        /// The daemon-origin the migration is keyed on.
        daemon_origin: u64,
        /// The peer that delivered the message.
        from: u64,
        /// The principal recorded for this role.
        expected: u64,
    },
}

impl std::fmt::Display for MigrationError {
    fn fmt(&self, f: &mut std::fmt::Formatter<'_>) -> std::fmt::Result {
        match self {
            Self::DaemonNotFound(id) => write!(f, "daemon {:#x} not found", id),
            Self::TargetUnavailable(id) => write!(f, "target node {:#x} unavailable", id),
            Self::NoTargetAvailable => {
                write!(
                    f,
                    "no candidate node satisfies the daemon's capability requirements"
                )
            }
            Self::StateFailed(msg) => write!(f, "state operation failed: {}", msg),
            Self::AlreadyMigrating(id) => write!(f, "daemon {:#x} already migrating", id),
            Self::WrongPhase { expected, got } => {
                write!(
                    f,
                    "wrong migration phase: expected {:?}, got {:?}",
                    expected, got
                )
            }
            Self::SnapshotTooLarge { size, max } => {
                write!(
                    f,
                    "snapshot too large: {} bytes exceeds max {} bytes",
                    size, max
                )
            }
            Self::BufferFull { events, bytes } => {
                write!(
                    f,
                    "migration buffer full: {} events / {} bytes",
                    events, bytes
                )
            }
            Self::WrongPeer {
                daemon_origin,
                from,
                expected,
            } => {
                write!(
                    f,
                    "migration {:#x}: peer {:#x} not the recorded principal {:#x}",
                    daemon_origin, from, expected
                )
            }
        }
    }
}

impl std::error::Error for MigrationError {}

#[cfg(test)]
mod tests {
    use super::*;
    use crate::adapter::net::state::causal::CausalLink;
    use bytes::Bytes;

    #[test]
    fn test_migration_phase_progression() {
        let kp = crate::adapter::net::identity::EntityKeypair::generate();
        let origin = kp.origin_hash();
        let mut state = MigrationState::new(origin, 0x1111, 0x2222);
        assert_eq!(state.phase(), MigrationPhase::Snapshot);

        // Can't skip phases
        assert!(state.transfer_complete().is_err());

        // Normal progression
        let snapshot = StateSnapshot::new(
            kp.entity_id().clone(),
            CausalLink::genesis(origin, 0),
            Bytes::from_static(b"state"),
            crate::adapter::net::state::horizon::ObservedHorizon::new(),
        );

        state.set_snapshot(snapshot).unwrap();
        assert_eq!(state.phase(), MigrationPhase::Transfer);

        state.transfer_complete().unwrap();
        assert_eq!(state.phase(), MigrationPhase::Restore);

        state.restore_complete().unwrap();
        assert_eq!(state.phase(), MigrationPhase::Replay);

        state.replay_complete().unwrap();
        assert_eq!(state.phase(), MigrationPhase::Cutover);

        state.cutover_complete().unwrap();
        assert_eq!(state.phase(), MigrationPhase::Complete);
        assert!(state.is_complete());
    }

    #[test]
    fn test_wrong_phase_error() {
        let mut state = MigrationState::new(0xAAAA, 0x1111, 0x2222);

        let err = state.restore_complete().unwrap_err();
        assert_eq!(
            err,
            MigrationError::WrongPhase {
                expected: MigrationPhase::Restore,
                got: MigrationPhase::Snapshot,
            }
        );
    }

    /// Pin: only `NotReady` is retriable. The rest are terminal.
    /// A regression that marks `FactoryNotFound` (or any other
    /// terminal reason) as retriable would cause the source to
    /// retry forever, waiting for a daemon that will never be
    /// registered — silent migration hang.
    #[test]
    fn migration_failure_reason_is_retriable_only_for_not_ready() {
        assert!(MigrationFailureReason::NotReady.is_retriable());

        // All other variants must be terminal.
        assert!(!MigrationFailureReason::FactoryNotFound.is_retriable());
        assert!(!MigrationFailureReason::ComputeNotSupported.is_retriable());
        assert!(!MigrationFailureReason::StateFailed("x".into()).is_retriable());
        assert!(!MigrationFailureReason::AlreadyMigrating.is_retriable());
        assert!(!MigrationFailureReason::IdentityTransportFailed("x".into()).is_retriable());
        assert!(!MigrationFailureReason::NotReadyTimeout { attempts: 5 }.is_retriable());
    }

    /// Pin: each variant has a distinct 16-bit wire code. A
    /// collision (two variants returning the same code) would
    /// silently mis-decode on the receiver — the dispatcher's
    /// payload-length-by-tag logic depends on tag uniqueness.
    /// Also pin the specific code values so a re-order of the
    /// enum doesn't silently re-number them (which would break
    /// every existing peer parsing the wire format).
    #[test]
    fn migration_failure_reason_code_is_stable_and_unique() {
        let variants = [
            (MigrationFailureReason::NotReady, 0u16),
            (MigrationFailureReason::FactoryNotFound, 1),
            (MigrationFailureReason::ComputeNotSupported, 2),
            (MigrationFailureReason::StateFailed("x".into()), 3),
            (MigrationFailureReason::AlreadyMigrating, 4),
            (
                MigrationFailureReason::IdentityTransportFailed("y".into()),
                5,
            ),
            (MigrationFailureReason::NotReadyTimeout { attempts: 1 }, 6),
        ];
        for (reason, expected_code) in &variants {
            assert_eq!(
                reason.code(),
                *expected_code,
                "wire code drift for {reason:?}",
            );
        }
        // Pairwise uniqueness.
        let codes: Vec<u16> = variants.iter().map(|(r, _)| r.code()).collect();
        let mut sorted = codes.clone();
        sorted.sort_unstable();
        sorted.dedup();
        assert_eq!(codes.len(), sorted.len(), "wire-code collision: {codes:?}",);
    }

    /// Pin: every MigrationFailureReason Display message names the
    /// failure class so operators can triage from a single log
    /// line. A refactor that drops the variant name from the
    /// message would force consumers to look at the wire code
    /// instead.
    #[test]
    fn migration_failure_reason_display_covers_every_variant() {
        assert_eq!(
            format!("{}", MigrationFailureReason::NotReady),
            "target runtime not ready yet"
        );
        assert_eq!(
            format!("{}", MigrationFailureReason::FactoryNotFound),
            "no factory registered on target for this daemon"
        );
        assert_eq!(
            format!("{}", MigrationFailureReason::ComputeNotSupported),
            "target does not run a compute runtime"
        );
        assert_eq!(
            format!("{}", MigrationFailureReason::StateFailed("boom".into())),
            "state failed: boom"
        );
        assert_eq!(
            format!("{}", MigrationFailureReason::AlreadyMigrating),
            "daemon is already migrating"
        );
        assert_eq!(
            format!(
                "{}",
                MigrationFailureReason::IdentityTransportFailed("seal failed".into())
            ),
            "identity envelope transport failed: seal failed"
        );
        assert_eq!(
            format!(
                "{}",
                MigrationFailureReason::NotReadyTimeout { attempts: 7 }
            ),
            "source gave up after 7 NotReady retries"
        );
    }

    /// The existing `test_wrong_phase_error` pins `restore_complete`
    /// rejecting Snapshot-state. The peer phase-advance methods
    /// (`transfer_complete`, `replay_complete`, `cutover_complete`)
    /// also gate on phase, but only restore_complete's reject
    /// branch was exercised — the codecov gap at L226-L229 and
    /// L239-L242 was the WrongPhase construction inside the other
    /// methods. Pin them so a future refactor that loosens any
    /// individual guard can't drop a phase silently.
    #[test]
    fn phase_advance_methods_reject_when_not_in_prerequisite_phase() {
        let mut state = MigrationState::new(0xAAAA, 0x1111, 0x2222);

        // Fresh state is in Snapshot — none of these may advance.
        assert!(matches!(
            state.transfer_complete(),
            Err(MigrationError::WrongPhase {
                expected: MigrationPhase::Transfer,
                got: MigrationPhase::Snapshot
            })
        ));
        assert!(matches!(
            state.replay_complete(),
            Err(MigrationError::WrongPhase {
                expected: MigrationPhase::Replay,
                got: MigrationPhase::Snapshot
            })
        ));
        assert!(matches!(
            state.cutover_complete(),
            Err(MigrationError::WrongPhase {
                expected: MigrationPhase::Cutover,
                got: MigrationPhase::Snapshot
            })
        ));
    }

    // ---- Regression tests for Cubic AI findings ----

    #[test]
    fn test_regression_set_snapshot_rejects_wrong_origin() {
        // Regression: set_snapshot accepted snapshots from any entity,
        // allowing migration to bind state from the wrong daemon.
        let kp = crate::adapter::net::identity::EntityKeypair::generate();
        let wrong_origin = kp.origin_hash();

        // Migration is for daemon 0xBBBB, but snapshot is for kp's origin
        let mut state = MigrationState::new(0xBBBB, 0x1111, 0x2222);

        let snapshot = StateSnapshot::new(
            kp.entity_id().clone(),
            CausalLink::genesis(wrong_origin, 0),
            Bytes::from_static(b"state"),
            crate::adapter::net::state::horizon::ObservedHorizon::new(),
        );

        assert!(
            state.set_snapshot(snapshot).is_err(),
            "set_snapshot must reject snapshot from a different daemon"
        );
    }

    /// Source pin: `started_at` must be a monotonic `Instant`,
    /// not a wall-clock `u64` of nanoseconds. The pre-fix shape
    /// stored `current_timestamp()` (UNIX-epoch nanos) and
    /// computed `elapsed_ms` as `current_timestamp().saturating_sub(started_at)
    /// / 1_000_000`. A wall-clock jump backward (NTP step,
    /// manual `date` set, VM resume to an earlier moment)
    /// would saturate the subtraction to `0` and report a long
    /// migration as instantaneous, masking stalls in operator
    /// dashboards.
    ///
    /// We can't simulate a clock jump in a unit test, so this
    /// test pins the shape: the field must be an `Instant`, and
    /// `elapsed_ms` must derive from `started_at.elapsed()` —
    /// which is monotonic by contract. A revert to `u64` plus
    /// `current_timestamp().saturating_sub(...)` re-introduces
    /// the hazard and is rejected here.
    #[test]
    fn started_at_must_be_monotonic_instant_not_wall_clock_u64() {
        let src = include_str!("migration.rs");

        // Locate the `started_at` field declaration inside
        // `pub struct MigrationState { ... }`.
        let struct_marker = "pub struct MigrationState";
        let struct_start = src
            .find(struct_marker)
            .expect("MigrationState struct must exist");
        // The struct body ends at the next `}` at column 0 (or
        // before the next top-level `impl`/`pub`).
        let struct_end_offset = src[struct_start..]
            .find("\n}\n")
            .expect("struct body must terminate with `}`")
            + struct_start;
        let struct_body = &src[struct_start..struct_end_offset];

        let body_no_comments: String = struct_body
            .lines()
            .map(|l| match l.find("//") {
                Some(idx) => &l[..idx],
                None => l,
            })
            .collect::<Vec<_>>()
            .join("\n");

        assert!(
            body_no_comments.contains("started_at: std::time::Instant"),
            "regression: MigrationState.started_at must be a \
             monotonic `std::time::Instant`. A `u64` of wall-clock \
             nanoseconds is unsafe — a system clock that steps \
             backward (NTP / VM resume / manual `date`) saturates \
             elapsed_ms to 0 and masks long-running stalls."
        );
        assert!(
            !body_no_comments.contains("started_at: u64"),
            "regression: MigrationState.started_at must not be a \
             `u64` wall-clock timestamp."
        );

        // `elapsed_ms` must derive from `started_at.elapsed()`,
        // not from `current_timestamp().saturating_sub(...)`.
        let elapsed_marker = "pub fn elapsed_ms(";
        let elapsed_start = src.find(elapsed_marker).expect("elapsed_ms must exist");
        let elapsed_end_offset = src[elapsed_start..]
            .find("\n    }")
            .expect("elapsed_ms body must terminate")
            + elapsed_start;
        let elapsed_body = &src[elapsed_start..elapsed_end_offset];

        let elapsed_no_comments: String = elapsed_body
            .lines()
            .map(|l| match l.find("//") {
                Some(idx) => &l[..idx],
                None => l,
            })
            .collect::<Vec<_>>()
            .join("\n");

        assert!(
            elapsed_no_comments.contains("self.started_at.elapsed()"),
            "regression: elapsed_ms must derive from \
             `self.started_at.elapsed()` to stay monotonic. \
             Using `current_timestamp().saturating_sub(self.started_at)` \
             reintroduces the wall-clock-jump-saturates-to-zero hazard."
        );
        assert!(
            !elapsed_no_comments.contains("current_timestamp()"),
            "regression: elapsed_ms must not call \
             `current_timestamp()` — that's the wall-clock path \
             with the saturating-on-jump-backward bug."
        );
    }
}