navigo

GPS/geospatial analysis in Rust — trace processing, GPX parsing, Minetti pace model, race route analysis, and live recalibration.

api / usage

location

A location is a GPS coordinate defined by a longitude, a latitude, and an altitude.

let location = Location {
    longitude: 2.350987,
    latitude: 48.856667,
    altitude: 890.0,
};

• distance to another location (km):

let distance: f64 = paris.calculate_distance_to(&moscow);

• bearing to another location (degrees):

let bearing: f64 = paris.calculate_bearing_to(&moscow);

• elevation change to another location:

let elevation: Elevation = paris.calculate_elevation_to(&moscow);
// elevation.positive — gain in meters
// elevation.negative — loss in meters

• check if inside a bounding box:

let area = Area { min_latitude: 54.7, max_latitude: 56.7,
                  min_longitude: 36.6, max_longitude: 38.6 };
let is_in: bool = location.is_in_area(&area);

• check if inside a radius (km):

let is_in: bool = location.is_in_radius(&center, &70.0);

trace

Trace::new ingests raw GPS locations and precomputes everything in one shot:

• Douglas-Peucker simplification (for traces > 1 000 points, ε = 15 m)
• Cumulative distances
• Denoised cumulative elevation gain / loss (median smoothing + hysteresis)
• Smoothed slope at each point
• Peaks and valleys (AMPD algorithm with prominence filter)
• Qualifying climb segments (Garmin-style thresholds)

A Trace is never empty — construction fails with TraceError::EmptyTrace if locations is empty, so every other method can assume at least one point.

let trace: Result<Trace, TraceError> = Trace::new(&locations);
// or via the convenience wrapper:
let trace: Result<Trace, TraceError> = build_trace(&locations);

precomputed fields

trace.locations                   // Vec<Location>  — simplified working set
trace.cumulative_distances        // Vec<f64>        — km from start, [0] == 0.0
trace.cumulative_elevation_gains  // Vec<f64>        — denoised gain in meters
trace.cumulative_elevation_losses // Vec<f64>        — denoised loss in meters
trace.slopes                      // Vec<f64>        — % grade at each point
trace.peaks                       // Vec<usize>      — indices of detected peaks
trace.valleys                     // Vec<usize>      — indices of detected valleys
trace.climbs                      // Vec<ClimbStats> — qualifying climb segments
trace.total_distance              // f64             — total distance in km
trace.total_elevation_gain        // f64             — total denoised gain in meters
trace.total_elevation_loss        // f64             — total denoised loss in meters

methods

• total length (km):

let length: f64 = trace.length(); // alias for total_distance

• location at a cumulative distance (km):

let loc: Option<&Location> = trace.point_at_distance(42.0);

• index at a cumulative distance (binary search):

let idx: usize = trace.index_at_distance(42.0);

• slice between two distance marks (km, both ends inclusive):

let section: Option<&[Location]> = trace.slice_between_distances(10.0, 50.0);

• closest location to a point (early-stop heuristic for loop courses):

let (loc, idx, dist_km) = trace.find_closest_point(&target).unwrap();
// start search from a known index (e.g. to handle loop courses):
let result = trace.find_closest_point_from(&target, start_from);

• bounding box (never fails — a trace always has at least one point):

let area: Area = trace.area();

• sub-section by index range (inclusive):

let section: Result<Vec<Location>, TraceError> = trace.get_section(start_index, end_index);

climb stats

pub struct ClimbStats {
    pub start_index:    usize, // valley index in trace.locations
    pub end_index:      usize, // summit index in trace.locations
    pub start_dist_km:  f64,
    pub climb_dist_km:  f64,
    pub elevation_gain: f64,   // meters
    pub summit_elev:    f64,   // meters
    pub avg_gradient:   f64,   // %
}

Climbs are qualified using Garmin Climb Pro thresholds: distance ≥ 500 m, average gradient ≥ 3 %, distance × gradient > 3 500 m·%

GPX parsing

Parse a .gpx file from raw bytes — no XML dependency, byte-scanning only.

use navigo::gpx::{parse_trace_points, parse_waypoints, parse_metadata};

let bytes = std::fs::read("route.gpx").unwrap();

// Extract track points as Vec<Location>
let locations = parse_trace_points(&bytes);

// Extract <wpt> elements as Vec<Waypoint>
let waypoints = parse_waypoints(&bytes);

// Extract <metadata> fields
let meta = parse_metadata(&bytes);
// meta.name        → Option<String>
// meta.description → Option<String>

Waypoints

pub struct Waypoint {
    pub latitude:      f64,
    pub longitude:     f64,
    pub elevation:     Option<f64>,
    pub name:          String,
    pub description:   Option<String>,
    pub comment:       Option<String>,
    pub symbol:        Option<String>,
    pub wpt_type:      Option<String>,   // e.g. "Start", "LifeBase", "TimeBarrier"
    pub time:          Option<i64>,      // Unix timestamp (seconds)
    pub stop_duration: Option<u32>,      // planned stop at this point (seconds)
}

Boundary classification:

waypoint.is_section_boundary(); // true for any waypoint with a non-null type
waypoint.is_stage_boundary();   // true only for Start / LifeBase / Arrival

Pace model

Minetti 2002

use navigo::minetti::{cmet, pace_factor, CMET_FLAT};

let cost = cmet(0.10);          // metabolic cost at +10% grade (J/(kg·m))
let factor = pace_factor(0.10); // relative speed factor vs flat (= cmet/CMET_FLAT)

Domain: slope in [-0.45, 0.45] (clamped beyond).

Fatigue, circadian & weather

use navigo::pace_model::{
    fatigue_factor, circadian_factor, WeatherLookup, WeatherConditions,
    K_FATIGUE, DEFAULT_BASE_PACE_S_PER_KM, DEFAULT_LIFE_BASE_STOP_S,
};

let fatigue   = fatigue_factor(d_eff_km, k_fatigue);  // exponential decay (≥ 1.0)
let circadian = circadian_factor(unix_time_s);         // cosine, −15% at 03:30 UTC

// WeatherConditions fields:
// temperature_c:   °C
// humidity_pct:    0–100
// wind_kmh:        km/h
// precip_prob_pct: 0–100

let weather = WeatherLookup::empty();
// or with per-checkpoint data:
let weather = WeatherLookup::new(
    vec!["La Mongie".to_string()],
    vec![WeatherConditions { temperature_c: 5.0, humidity_pct: 80.0, wind_kmh: 30.0, precip_prob_pct: 40.0 }],
);
let factor = weather.factor_for("La Mongie"); // combined thermal + wind + precip factor

Useful constants:

Route analysis

All three levels take a built Trace and a slice of Waypoints derived from the same GPX file.

use navigo::gpx::{parse_trace_points, parse_waypoints};
use navigo::{build_trace, leg, section, stage, pace_model::WeatherLookup};

let bytes = std::fs::read("route.gpx").unwrap();
let trace = build_trace(&parse_trace_points(&bytes)).unwrap();
let waypoints = parse_waypoints(&bytes);
let weather = WeatherLookup::empty();

const BASE_PACE: f64 = 500.0;  // s/km on flat terrain
const K_FATIGUE: f64 = 0.002;
const LIFE_BASE_STOP: u32 = 3600; // 1 h planned stop at LifeBase checkpoints

Legs

One LegStats per consecutive pair of section-boundary waypoints.

let legs: Vec<leg::LegStats> = leg::compute_from_waypoints(&trace, &waypoints);
// legs[i].leg_id
// legs[i].section_idx
// legs[i].start_location / end_location  (waypoint names)
// legs[i].total_distance_km
// legs[i].total_elevation_gain_m / total_elevation_loss_m
// legs[i].avg_slope / max_slope          (% grade)
// legs[i].min_elevation / max_elevation  (meters)
// legs[i].bearing                        (degrees from north)
// legs[i].difficulty                     (1–5, Naismith effort)
// legs[i].estimated_duration_s           (Naismith rule, no fatigue)

Sections

Sections are legs enriched with pace-model data (Minetti + fatigue + circadian + weather).

let sections: Option<Vec<section::SectionStats>> =
    section::compute_from_waypoints(&trace, &waypoints, BASE_PACE, K_FATIGUE, LIFE_BASE_STOP, &weather);
// sections[i].section_id / stage_idx
// sections[i].start_location / end_location
// sections[i].total_distance_km
// sections[i].total_elevation_gain_m / total_elevation_loss_m
// sections[i].avg_slope / max_slope / min_elevation / max_elevation
// sections[i].start_time / end_time      (Unix timestamps from waypoint <time>, or None)
// sections[i].bearing / difficulty
// sections[i].pace_factor                — combined speed factor vs flat
// sections[i].estimated_duration_s       — moving time + planned stop
// sections[i].max_completion_time        — cutoff as Unix timestamp, or None
// sections[i].cutoff_ratio               — estimated_duration / time_budget (< 1.0 = ok)
// sections[i].stop_duration              — planned stop at end checkpoint (s), or None

Stages

Stages group sections between Start / LifeBase / Arrival boundaries (TimeBarrier waypoints are skipped).

let stages: Option<Vec<stage::StageStats>> =
    stage::compute_from_waypoints(&trace, &waypoints, BASE_PACE, K_FATIGUE, LIFE_BASE_STOP, &weather);
// stages[i].stage_id
// stages[i].start_location / end_location
// stages[i].total_distance_km
// stages[i].total_elevation_gain_m / total_elevation_loss_m
// stages[i].avg_slope / max_slope / min_elevation / max_elevation
// stages[i].start_time / end_time
// stages[i].bearing / difficulty
// stages[i].pace_factor / estimated_duration_s
// stages[i].max_completion_time / cutoff_ratio / stop_duration

Time utilities

use navigo::time::parse_iso8601_to_epoch;

// Supported formats: "2025-11-20T12:00:00Z", "2025-11-20T12:00:00+01:00"
let epoch: Result<i64, _> = parse_iso8601_to_epoch("2025-11-20T12:00:00Z");

Live calibration

Recalibrate remaining ETAs mid-race given the actual elapsed time at a known position.

use navigo::calibration::{recalibrate_from_current, BoundaryKind};

let result = recalibrate_from_current(
    &trace, &waypoints, BoundaryKind::Section,
    current_index,   // trace point index snapped to current position
    actual_elapsed_s,
    BASE_PACE, K_FATIGUE, LIFE_BASE_STOP, &weather,
);

if let Some(cal) = result {
    cal.calibration_factor;            // clamped to [0.5, 3.0]
    cal.calibrated_base_pace_s_per_km; // adjusted flat pace
    for eta in &cal.etas {
        eta.id;
        eta.remaining_duration_s;
        eta.cumulative_remaining_s;
    }
}

The factor is only applied when predicted_so_far ≥ 300 s to avoid noise from very short segments.

WebAssembly

The library can be compiled to WASM for use in web applications via the wasm feature. Prebuilt bindings are published to npm as @totorototo/navigo — npm install @totorototo/navigo.

how it works

All data lives in WASM linear memory. The JS side holds a thin pointer (WasmTrace). Only the boundaries cross the WASM↔JS membrane — scalars are free (registers), bulk arrays are copied once on demand.

buildTrace(Float64Array)          ← one O(n) copy JS→WASM, null if no points
       │
       ▼
WasmTrace stays in WASM memory
       │
       ├── trace.total_distance        → free (register)
       ├── trace.find_closest_point()  → free (scalars in/out)
       ├── trace.locations_flat        → one O(n) copy, cache it
       └── trace.free()               ← you must call this (no GC bridge)

build

cargo install wasm-pack
wasm-pack build --target web -- --features wasm      # ES modules — Vite, plain browser
wasm-pack build --target bundler -- --features wasm  # webpack / Rollup

usage

From raw coordinates (buildTrace)

import init, { buildTrace } from "./navigo.js";
await init();

// build — one copy in, all computation in WASM
const pts = new Float64Array([
  2.350987,
  48.856667,
  0, // lon, lat, alt
  37.617634,
  55.755787,
  200,
]);
const trace = buildTrace(pts);
// → WasmTrace, or null if pts carries no points

// scalar getters — free
trace.total_distance; // number (km)
trace.total_elevation_gain; // number (m)
trace.total_elevation_loss; // number (m)
trace.location_count; // number

// array getters — copy once, then cache on the JS side
const locs = trace.locations_flat; // Float64Array [lon,lat,alt,…]
const dists = trace.cumulative_distances; // Float64Array (km)
const gains = trace.cumulative_elevation_gains; // Float64Array (m)
const losses = trace.cumulative_elevation_losses; // Float64Array (m)
const slopes = trace.slopes; // Float64Array (%)
const peaks = trace.peaks; // Uint32Array  (indices)
const valleys = trace.valleys; // Uint32Array  (indices)

// query methods — scalars in, one small object out
trace.point_at_distance(42.0);
// → { longitude, latitude, altitude } | undefined

trace.index_at_distance(42.0);
// → number

trace.find_closest_point(lon, lat, alt);
// → { location: { longitude, latitude, altitude }, index, distance } | undefined

trace.find_closest_point_from(lon, lat, alt, lastIndex);
// → same shape | undefined  (use on live-tracking loops)

trace.slice_between_distances(10.0, 50.0);
// → Float64Array [lon,lat,alt,…] | undefined

trace.get_section(startIndex, endIndex);
// → Float64Array [lon,lat,alt,…]  (throws on out-of-bounds / invalid range)

trace.area();
// → { min_longitude, max_longitude, min_latitude, max_latitude }

trace.elevation();
// → { positive, negative }  (raw, non-denoised)

trace.climbs();
// → [{ start_index, end_index, start_dist_km, climb_dist_km,
//      elevation_gain, summit_elev, avg_gradient }, …]

// always release when done — Rust allocator has no GC bridge
trace.free();

From a GPX file (parseGpx / parseGpxFull)

import init, { parseGpx, parseGpxFull } from "./navigo.js";
await init();

const bytes = new Uint8Array(
  await fetch("/route.gpx").then((r) => r.arrayBuffer()),
);

// Elevation profile + climb detection only
const trace = parseGpx(bytes);
// → WasmTrace | null  (same API as buildTrace)

// Full race analysis — one call
const full = parseGpxFull(bytes, 500, 0.002, 3600);
// basePace=500 s/km, kFatigue=0.002, lifeBaseStop=3600 s
// → {
//     trace:     { total_distance_km, total_elevation_gain_m, … },
//     metadata:  { name, description },
//     waypoints: [{ latitude, longitude, elevation, name, wpt_type, time, … }],
//     legs:      [{ total_distance_km, total_elevation_gain_m, bearing, difficulty, … }],
//     sections:  [{ …leg fields, pace_factor, max_completion_time, cutoff_ratio, … }],
//     stages:    [{ …same, grouped by Start/LifeBase/Arrival }],
//   }
//   or null on parse failure

trace.free(); // still needed for the WasmTrace from parseGpx

memory management

WasmTrace lives in WASM linear memory. The JS object is just a pointer — Rust cannot reclaim it when the JS variable is GC'd. Always call .free(), or register a FinalizationRegistry:

const registry = new FinalizationRegistry((t) => t.free());
const trace = buildTrace(pts);
registry.register(trace, trace);

license

MIT