Struct nalgebra::geometry::Transform

impl<N: Real, D: DimNameAdd<U1>, C: TCategory> Transform<N, D, C>where
DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>>,

pub fn from_matrix_unchecked(matrix: MatrixN<N, DimNameSum<D, U1>>) -> Self

Creates a new transformation from the given homogeneous matrix. The transformation category of Self is not checked to be verified by the given matrix.

pub fn unwrap(self) -> MatrixN<N, DimNameSum<D, U1>>

The underlying matrix.

pub fn matrix(&self) -> &MatrixN<N, DimNameSum<D, U1>>

A reference to the underlying matrix.

pub fn matrix_mut_unchecked(&mut self) -> &mut MatrixN<N, DimNameSum<D, U1>>

A mutable reference to the underlying matrix.

It is _unchecked because direct modifications of this matrix may break invariants identified by this transformation category.

pub fn set_category<CNew: SuperTCategoryOf<C>>(self) -> Transform<N, D, CNew>

Sets the category of this transform.

This can be done only if the new category is more general than the current one, e.g., a transform with category TProjective cannot be converted to a transform with category TAffine because not all projective transformations are affine (the other way-round is valid though).

pub fn clone_owned(&self) -> Transform<N, D, C>

👎Deprecated: This method is a no-op and will be removed in a future release.

Clones this transform into one that owns its data.

pub fn to_homogeneous(&self) -> MatrixN<N, DimNameSum<D, U1>>

Converts this transform into its equivalent homogeneous transformation matrix.

pub fn try_inverse(self) -> Option<Transform<N, D, C>>

Attempts to invert this transformation. You may use .inverse instead of this transformation has a subcategory of TProjective.

pub fn inverse(self) -> Transform<N, D, C>where
C: SubTCategoryOf<TProjective>,

Inverts this transformation. Use .try_inverse if this transform has the TGeneral category (it may not be invertible).

pub fn try_inverse_mut(&mut self) -> bool

Attempts to invert this transformation in-place. You may use .inverse_mut instead of this transformation has a subcategory of TProjective.

pub fn inverse_mut(&mut self)where
C: SubTCategoryOf<TProjective>,

Inverts this transformation in-place. Use .try_inverse_mut if this transform has the TGeneral category (it may not be invertible).

impl<N: Real, D: DimNameAdd<U1>> Transform<N, D, TGeneral>where
DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>>,

pub fn matrix_mut(&mut self) -> &mut MatrixN<N, DimNameSum<D, U1>>

A mutable reference to underlying matrix. Use .matrix_mut_unchecked instead if this transformation category is not TGeneral.

impl<N: Real, D: DimNameAdd<U1>, C: TCategory> Transform<N, D, C>where
DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>>,

pub fn identity() -> Self

Creates a new identity transform.

Trait Implementations§

impl<N: Real, D: DimNameAdd<U1>, C> AbstractMagma<Multiplicative> for Transform<N, D, C>where
C: TCategory,
DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>>,

fn operate(&self, rhs: &Self) -> Self

Performs an operation.

fn op(&self, _: O, lhs: &Self) -> Self

Performs specific operation.

impl<N: Real, D: DimNameAdd<U1>, C: TCategory> Clone for Transform<N, D, C>where
DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>>,

fn clone(&self) -> Self

Returns a copy of the value. Read more

1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more

impl<N: Debug + Real, D: Debug + DimNameAdd<U1>, C: Debug + TCategory> Debug for Transform<N, D, C>where
DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>>,

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

impl<'a, 'b, N, D: DimNameAdd<U1>, C: TCategoryMul<TAffine>> Div<&'b Rotation<N, D>> for &'a Transform<N, D, C>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N, D, D> + Allocator<N, DimNameSum<D, U1>, D>,

type Output = Transform<N, D, <C as TCategoryMul<TAffine>>::Representative>

The resulting type after applying the / operator.

fn div(self, rhs: &'b Rotation<N, D>) -> Self::Output

Performs the / operation. Read more

impl<'b, N, D: DimNameAdd<U1>, C: TCategoryMul<TAffine>> Div<&'b Rotation<N, D>> for Transform<N, D, C>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N, D, D> + Allocator<N, DimNameSum<D, U1>, D>,

type Output = Transform<N, D, <C as TCategoryMul<TAffine>>::Representative>

The resulting type after applying the / operator.

fn div(self, rhs: &'b Rotation<N, D>) -> Self::Output

Performs the / operation. Read more

impl<'a, 'b, N, D: DimNameAdd<U1>, C: TCategoryMul<TAffine>> Div<&'b Transform<N, D, C>> for &'a Rotation<N, D>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, D, D> + Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N, D, DimNameSum<D, U1>>,

type Output = Transform<N, D, <C as TCategoryMul<TAffine>>::Representative>

The resulting type after applying the / operator.

fn div(self, rhs: &'b Transform<N, D, C>) -> Self::Output

Performs the / operation. Read more

impl<'a, 'b, N, D: DimNameAdd<U1>, C: TCategoryMul<TAffine>> Div<&'b Transform<N, D, C>> for &'a Translation<N, D>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, D, U1> + Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N, D, DimNameSum<D, U1>>,

type Output = Transform<N, D, <C as TCategoryMul<TAffine>>::Representative>

The resulting type after applying the / operator.

fn div(self, rhs: &'b Transform<N, D, C>) -> Self::Output

Performs the / operation. Read more

impl<'b, N, D: DimNameAdd<U1>, C: TCategoryMul<TAffine>> Div<&'b Transform<N, D, C>> for Rotation<N, D>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, D, D> + Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N, D, DimNameSum<D, U1>>,

type Output = Transform<N, D, <C as TCategoryMul<TAffine>>::Representative>

The resulting type after applying the / operator.

fn div(self, rhs: &'b Transform<N, D, C>) -> Self::Output

Performs the / operation. Read more

impl<'b, N, D: DimNameAdd<U1>, C: TCategoryMul<TAffine>> Div<&'b Transform<N, D, C>> for Translation<N, D>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, D, U1> + Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N, D, DimNameSum<D, U1>>,

type Output = Transform<N, D, <C as TCategoryMul<TAffine>>::Representative>

The resulting type after applying the / operator.

fn div(self, rhs: &'b Transform<N, D, C>) -> Self::Output

Performs the / operation. Read more

impl<'a, 'b, N, D: DimNameAdd<U1>, CA: TCategoryMul<CB>, CB: SubTCategoryOf<TProjective>> Div<&'b Transform<N, D, CB>> for &'a Transform<N, D, CA>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>>,

type Output = Transform<N, D, <CA as TCategoryMul<CB>>::Representative>

The resulting type after applying the / operator.

fn div(self, rhs: &'b Transform<N, D, CB>) -> Self::Output

Performs the / operation. Read more

impl<'b, N, D: DimNameAdd<U1>, CA: TCategoryMul<CB>, CB: SubTCategoryOf<TProjective>> Div<&'b Transform<N, D, CB>> for Transform<N, D, CA>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>>,

type Output = Transform<N, D, <CA as TCategoryMul<CB>>::Representative>

The resulting type after applying the / operator.

fn div(self, rhs: &'b Transform<N, D, CB>) -> Self::Output

Performs the / operation. Read more

impl<'a, 'b, N, C: TCategoryMul<TAffine>> Div<&'b Transform<N, U3, C>> for &'a UnitQuaternion<N>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, U4, U1> + Allocator<N, U4, U4>,

type Output = Transform<N, U3, <C as TCategoryMul<TAffine>>::Representative>

The resulting type after applying the / operator.

fn div(self, rhs: &'b Transform<N, U3, C>) -> Self::Output

Performs the / operation. Read more

impl<'b, N, C: TCategoryMul<TAffine>> Div<&'b Transform<N, U3, C>> for UnitQuaternion<N>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, U4, U1> + Allocator<N, U4, U4>,

type Output = Transform<N, U3, <C as TCategoryMul<TAffine>>::Representative>

The resulting type after applying the / operator.

fn div(self, rhs: &'b Transform<N, U3, C>) -> Self::Output

Performs the / operation. Read more

impl<'a, 'b, N, D: DimNameAdd<U1>, C: TCategoryMul<TAffine>> Div<&'b Translation<N, D>> for &'a Transform<N, D, C>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N, D, U1> + Allocator<N, DimNameSum<D, U1>, U1>,

type Output = Transform<N, D, <C as TCategoryMul<TAffine>>::Representative>

The resulting type after applying the / operator.

fn div(self, rhs: &'b Translation<N, D>) -> Self::Output

Performs the / operation. Read more

impl<'b, N, D: DimNameAdd<U1>, C: TCategoryMul<TAffine>> Div<&'b Translation<N, D>> for Transform<N, D, C>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N, D, U1> + Allocator<N, DimNameSum<D, U1>, U1>,

type Output = Transform<N, D, <C as TCategoryMul<TAffine>>::Representative>

The resulting type after applying the / operator.

fn div(self, rhs: &'b Translation<N, D>) -> Self::Output

Performs the / operation. Read more

impl<'a, 'b, N, C: TCategoryMul<TAffine>> Div<&'b Unit<Quaternion<N>>> for &'a Transform<N, U3, C>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, U4, U4> + Allocator<N, U4, U1>,

type Output = Transform<N, U3, <C as TCategoryMul<TAffine>>::Representative>

The resulting type after applying the / operator.

fn div(self, rhs: &'b UnitQuaternion<N>) -> Self::Output

Performs the / operation. Read more

impl<'b, N, C: TCategoryMul<TAffine>> Div<&'b Unit<Quaternion<N>>> for Transform<N, U3, C>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, U4, U4> + Allocator<N, U4, U1>,

type Output = Transform<N, U3, <C as TCategoryMul<TAffine>>::Representative>

The resulting type after applying the / operator.

fn div(self, rhs: &'b UnitQuaternion<N>) -> Self::Output

Performs the / operation. Read more

impl<'a, N, D: DimNameAdd<U1>, C: TCategoryMul<TAffine>> Div<Rotation<N, D>> for &'a Transform<N, D, C>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N, D, D> + Allocator<N, DimNameSum<D, U1>, D>,

type Output = Transform<N, D, <C as TCategoryMul<TAffine>>::Representative>

The resulting type after applying the / operator.

fn div(self, rhs: Rotation<N, D>) -> Self::Output

Performs the / operation. Read more

impl<N, D: DimNameAdd<U1>, C: TCategoryMul<TAffine>> Div<Rotation<N, D>> for Transform<N, D, C>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N, D, D> + Allocator<N, DimNameSum<D, U1>, D>,

type Output = Transform<N, D, <C as TCategoryMul<TAffine>>::Representative>

The resulting type after applying the / operator.

fn div(self, rhs: Rotation<N, D>) -> Self::Output

Performs the / operation. Read more

impl<'a, N, D: DimNameAdd<U1>, C: TCategoryMul<TAffine>> Div<Transform<N, D, C>> for &'a Rotation<N, D>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, D, D> + Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N, D, DimNameSum<D, U1>>,

type Output = Transform<N, D, <C as TCategoryMul<TAffine>>::Representative>

The resulting type after applying the / operator.

fn div(self, rhs: Transform<N, D, C>) -> Self::Output

Performs the / operation. Read more

impl<'a, N, D: DimNameAdd<U1>, C: TCategoryMul<TAffine>> Div<Transform<N, D, C>> for &'a Translation<N, D>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, D, U1> + Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N, D, DimNameSum<D, U1>>,

type Output = Transform<N, D, <C as TCategoryMul<TAffine>>::Representative>

The resulting type after applying the / operator.

fn div(self, rhs: Transform<N, D, C>) -> Self::Output

Performs the / operation. Read more

impl<N, D: DimNameAdd<U1>, C: TCategoryMul<TAffine>> Div<Transform<N, D, C>> for Rotation<N, D>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, D, D> + Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N, D, DimNameSum<D, U1>>,

type Output = Transform<N, D, <C as TCategoryMul<TAffine>>::Representative>

The resulting type after applying the / operator.

fn div(self, rhs: Transform<N, D, C>) -> Self::Output

Performs the / operation. Read more

impl<N, D: DimNameAdd<U1>, C: TCategoryMul<TAffine>> Div<Transform<N, D, C>> for Translation<N, D>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, D, U1> + Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N, D, DimNameSum<D, U1>>,

type Output = Transform<N, D, <C as TCategoryMul<TAffine>>::Representative>

The resulting type after applying the / operator.

fn div(self, rhs: Transform<N, D, C>) -> Self::Output

Performs the / operation. Read more

impl<'a, N, D: DimNameAdd<U1>, CA: TCategoryMul<CB>, CB: SubTCategoryOf<TProjective>> Div<Transform<N, D, CB>> for &'a Transform<N, D, CA>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>>,

type Output = Transform<N, D, <CA as TCategoryMul<CB>>::Representative>

The resulting type after applying the / operator.

fn div(self, rhs: Transform<N, D, CB>) -> Self::Output

Performs the / operation. Read more

impl<N, D: DimNameAdd<U1>, CA: TCategoryMul<CB>, CB: SubTCategoryOf<TProjective>> Div<Transform<N, D, CB>> for Transform<N, D, CA>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>>,

type Output = Transform<N, D, <CA as TCategoryMul<CB>>::Representative>

The resulting type after applying the / operator.

fn div(self, rhs: Transform<N, D, CB>) -> Self::Output

Performs the / operation. Read more

impl<'a, N, C: TCategoryMul<TAffine>> Div<Transform<N, U3, C>> for &'a UnitQuaternion<N>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, U4, U1> + Allocator<N, U4, U4>,

type Output = Transform<N, U3, <C as TCategoryMul<TAffine>>::Representative>

The resulting type after applying the / operator.

fn div(self, rhs: Transform<N, U3, C>) -> Self::Output

Performs the / operation. Read more

impl<N, C: TCategoryMul<TAffine>> Div<Transform<N, U3, C>> for UnitQuaternion<N>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, U4, U1> + Allocator<N, U4, U4>,

type Output = Transform<N, U3, <C as TCategoryMul<TAffine>>::Representative>

The resulting type after applying the / operator.

fn div(self, rhs: Transform<N, U3, C>) -> Self::Output

Performs the / operation. Read more

impl<'a, N, D: DimNameAdd<U1>, C: TCategoryMul<TAffine>> Div<Translation<N, D>> for &'a Transform<N, D, C>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N, D, U1> + Allocator<N, DimNameSum<D, U1>, U1>,

type Output = Transform<N, D, <C as TCategoryMul<TAffine>>::Representative>

The resulting type after applying the / operator.

fn div(self, rhs: Translation<N, D>) -> Self::Output

Performs the / operation. Read more

impl<N, D: DimNameAdd<U1>, C: TCategoryMul<TAffine>> Div<Translation<N, D>> for Transform<N, D, C>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N, D, U1> + Allocator<N, DimNameSum<D, U1>, U1>,

type Output = Transform<N, D, <C as TCategoryMul<TAffine>>::Representative>

The resulting type after applying the / operator.

fn div(self, rhs: Translation<N, D>) -> Self::Output

Performs the / operation. Read more

impl<'a, N, C: TCategoryMul<TAffine>> Div<Unit<Quaternion<N>>> for &'a Transform<N, U3, C>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, U4, U4> + Allocator<N, U4, U1>,

type Output = Transform<N, U3, <C as TCategoryMul<TAffine>>::Representative>

The resulting type after applying the / operator.

fn div(self, rhs: UnitQuaternion<N>) -> Self::Output

Performs the / operation. Read more

impl<N, C: TCategoryMul<TAffine>> Div<Unit<Quaternion<N>>> for Transform<N, U3, C>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, U4, U4> + Allocator<N, U4, U1>,

type Output = Transform<N, U3, <C as TCategoryMul<TAffine>>::Representative>

The resulting type after applying the / operator.

fn div(self, rhs: UnitQuaternion<N>) -> Self::Output

Performs the / operation. Read more

impl<'b, N, D: DimNameAdd<U1>, C: TCategory> DivAssign<&'b Rotation<N, D>> for Transform<N, D, C>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N, D, D>,

fn div_assign(&mut self, rhs: &'b Rotation<N, D>)

Performs the /= operation. Read more

impl<'b, N, D: DimNameAdd<U1>, CA: SuperTCategoryOf<CB>, CB: SubTCategoryOf<TProjective>> DivAssign<&'b Transform<N, D, CB>> for Transform<N, D, CA>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>>,

fn div_assign(&mut self, rhs: &'b Transform<N, D, CB>)

Performs the /= operation. Read more

impl<'b, N, D: DimNameAdd<U1>, C: TCategory> DivAssign<&'b Translation<N, D>> for Transform<N, D, C>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N, D, U1>,

fn div_assign(&mut self, rhs: &'b Translation<N, D>)

Performs the /= operation. Read more

impl<'b, N, C: TCategory> DivAssign<&'b Unit<Quaternion<N>>> for Transform<N, U3, C>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, U4, U4> + Allocator<N, U4, U1>,

fn div_assign(&mut self, rhs: &'b UnitQuaternion<N>)

Performs the /= operation. Read more

impl<N, D: DimNameAdd<U1>, C: TCategory> DivAssign<Rotation<N, D>> for Transform<N, D, C>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N, D, D>,

fn div_assign(&mut self, rhs: Rotation<N, D>)

Performs the /= operation. Read more

impl<N, D: DimNameAdd<U1>, CA: SuperTCategoryOf<CB>, CB: SubTCategoryOf<TProjective>> DivAssign<Transform<N, D, CB>> for Transform<N, D, CA>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>>,

fn div_assign(&mut self, rhs: Transform<N, D, CB>)

Performs the /= operation. Read more

impl<N, D: DimNameAdd<U1>, C: TCategory> DivAssign<Translation<N, D>> for Transform<N, D, C>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N, D, U1>,

fn div_assign(&mut self, rhs: Translation<N, D>)

Performs the /= operation. Read more

impl<N, C: TCategory> DivAssign<Unit<Quaternion<N>>> for Transform<N, U3, C>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, U4, U4> + Allocator<N, U4, U1>,

fn div_assign(&mut self, rhs: UnitQuaternion<N>)

Performs the /= operation. Read more

impl<N: Real, D: DimName, C> From<Transform<N, D, C>> for MatrixN<N, DimNameSum<D, U1>>where
 D: DimNameAdd<U1>,
 C: TCategory,
 DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>>,

fn from(t: Transform<N, D, C>) -> Self

Converts to this type from the input type.

impl<N: Real, D: DimNameAdd<U1>, C> Identity<Multiplicative> for Transform<N, D, C>where
C: TCategory,
DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>>,

fn identity() -> Self

The identity element.

fn id(_: O) -> Selfwhere
Self: Sized,

Specific identity.

impl<N: Real, D, C: TCategory> Index<(usize, usize)> for Transform<N, D, C>where
D: DimName + DimNameAdd<U1>,
DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>>,

type Output = N

The returned type after indexing.

fn index(&self, ij: (usize, usize)) -> &N

Performs the indexing (container[index]) operation. Read more

impl<N: Real, D> IndexMut<(usize, usize)> for Transform<N, D, TGeneral>where
D: DimName + DimNameAdd<U1>,
DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>>,

fn index_mut(&mut self, ij: (usize, usize)) -> &mut N

Performs the mutable indexing (container[index]) operation. Read more

impl<N: Real, D: DimNameAdd<U1>, C> Inverse<Multiplicative> for Transform<N, D, C>where
C: SubTCategoryOf<TProjective>,
DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>>,

fn inverse(&self) -> Self

Returns the inverse of self, relative to the operator O.

fn inverse_mut(&mut self)

In-place inversin of self.

impl<'a, 'b, N, D: DimNameAdd<U1>, C: TCategoryMul<TAffine>, R: SubsetOf<MatrixN<N, DimNameSum<D, U1>>>> Mul<&'b Isometry<N, D, R>> for &'a Transform<N, D, C>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N, D, U1> + Allocator<N, DimNameSum<D, U1>, U1>,

type Output = Transform<N, D, <C as TCategoryMul<TAffine>>::Representative>

The resulting type after applying the * operator.

fn mul(self, rhs: &'b Isometry<N, D, R>) -> Self::Output

Performs the * operation. Read more

impl<'b, N, D: DimNameAdd<U1>, C: TCategoryMul<TAffine>, R: SubsetOf<MatrixN<N, DimNameSum<D, U1>>>> Mul<&'b Isometry<N, D, R>> for Transform<N, D, C>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N, D, U1> + Allocator<N, DimNameSum<D, U1>, U1>,

type Output = Transform<N, D, <C as TCategoryMul<TAffine>>::Representative>

The resulting type after applying the * operator.

fn mul(self, rhs: &'b Isometry<N, D, R>) -> Self::Output

Performs the * operation. Read more

impl<'a, 'b, N, D: DimNameAdd<U1>, C: TCategory> Mul<&'b Matrix<N, D, U1, <DefaultAllocator as Allocator<N, D, U1>>::Buffer>> for &'a Transform<N, D, C>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N, D, U1> + Allocator<N, DimNameSum<D, U1>, U1>,

type Output = Matrix<N, D, U1, <DefaultAllocator as Allocator<N, D, U1>>::Buffer>

The resulting type after applying the * operator.

fn mul(self, rhs: &'b VectorN<N, D>) -> Self::Output

Performs the * operation. Read more

impl<'b, N, D: DimNameAdd<U1>, C: TCategory> Mul<&'b Matrix<N, D, U1, <DefaultAllocator as Allocator<N, D, U1>>::Buffer>> for Transform<N, D, C>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N, D, U1> + Allocator<N, DimNameSum<D, U1>, U1>,

type Output = Matrix<N, D, U1, <DefaultAllocator as Allocator<N, D, U1>>::Buffer>

The resulting type after applying the * operator.

fn mul(self, rhs: &'b VectorN<N, D>) -> Self::Output

Performs the * operation. Read more

impl<'a, 'b, N, D: DimNameAdd<U1>, C: TCategory> Mul<&'b Point<N, D>> for &'a Transform<N, D, C>where
 N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
 DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N, D, U1> + Allocator<N, DimNameSum<D, U1>, U1>,
 DefaultAllocator: Allocator<N, D, D>,

type Output = Point<N, D>

The resulting type after applying the * operator.

fn mul(self, rhs: &'b Point<N, D>) -> Self::Output

Performs the * operation. Read more

impl<'b, N, D: DimNameAdd<U1>, C: TCategory> Mul<&'b Point<N, D>> for Transform<N, D, C>where
 N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
 DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N, D, U1> + Allocator<N, DimNameSum<D, U1>, U1>,
 DefaultAllocator: Allocator<N, D, D>,

type Output = Point<N, D>

The resulting type after applying the * operator.

fn mul(self, rhs: &'b Point<N, D>) -> Self::Output

Performs the * operation. Read more

impl<'a, 'b, N, D: DimNameAdd<U1>, C: TCategoryMul<TAffine>> Mul<&'b Rotation<N, D>> for &'a Transform<N, D, C>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N, D, D> + Allocator<N, DimNameSum<D, U1>, D>,

type Output = Transform<N, D, <C as TCategoryMul<TAffine>>::Representative>

The resulting type after applying the * operator.

fn mul(self, rhs: &'b Rotation<N, D>) -> Self::Output

Performs the * operation. Read more

impl<'b, N, D: DimNameAdd<U1>, C: TCategoryMul<TAffine>> Mul<&'b Rotation<N, D>> for Transform<N, D, C>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N, D, D> + Allocator<N, DimNameSum<D, U1>, D>,

type Output = Transform<N, D, <C as TCategoryMul<TAffine>>::Representative>

The resulting type after applying the * operator.

fn mul(self, rhs: &'b Rotation<N, D>) -> Self::Output

Performs the * operation. Read more

impl<'a, 'b, N, D: DimNameAdd<U1>, C: TCategoryMul<TAffine>, R: SubsetOf<MatrixN<N, DimNameSum<D, U1>>>> Mul<&'b Similarity<N, D, R>> for &'a Transform<N, D, C>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N, D, U1> + Allocator<N, DimNameSum<D, U1>, U1>,

type Output = Transform<N, D, <C as TCategoryMul<TAffine>>::Representative>

The resulting type after applying the * operator.

fn mul(self, rhs: &'b Similarity<N, D, R>) -> Self::Output

Performs the * operation. Read more

impl<'b, N, D: DimNameAdd<U1>, C: TCategoryMul<TAffine>, R: SubsetOf<MatrixN<N, DimNameSum<D, U1>>>> Mul<&'b Similarity<N, D, R>> for Transform<N, D, C>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N, D, U1> + Allocator<N, DimNameSum<D, U1>, U1>,

type Output = Transform<N, D, <C as TCategoryMul<TAffine>>::Representative>

The resulting type after applying the * operator.

fn mul(self, rhs: &'b Similarity<N, D, R>) -> Self::Output

Performs the * operation. Read more

impl<'a, 'b, N, D: DimNameAdd<U1>, C: TCategoryMul<TAffine>, R: SubsetOf<MatrixN<N, DimNameSum<D, U1>>>> Mul<&'b Transform<N, D, C>> for &'a Isometry<N, D, R>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, D, U1> + Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N, D, DimNameSum<D, U1>>,

type Output = Transform<N, D, <C as TCategoryMul<TAffine>>::Representative>

The resulting type after applying the * operator.

fn mul(self, rhs: &'b Transform<N, D, C>) -> Self::Output

Performs the * operation. Read more

impl<'a, 'b, N, D: DimNameAdd<U1>, C: TCategoryMul<TAffine>> Mul<&'b Transform<N, D, C>> for &'a Rotation<N, D>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, D, D> + Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N, D, DimNameSum<D, U1>>,

type Output = Transform<N, D, <C as TCategoryMul<TAffine>>::Representative>

The resulting type after applying the * operator.

fn mul(self, rhs: &'b Transform<N, D, C>) -> Self::Output

Performs the * operation. Read more

impl<'a, 'b, N, D: DimNameAdd<U1>, C: TCategoryMul<TAffine>, R: SubsetOf<MatrixN<N, DimNameSum<D, U1>>>> Mul<&'b Transform<N, D, C>> for &'a Similarity<N, D, R>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, D, U1> + Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N, D, DimNameSum<D, U1>>,

type Output = Transform<N, D, <C as TCategoryMul<TAffine>>::Representative>

The resulting type after applying the * operator.

fn mul(self, rhs: &'b Transform<N, D, C>) -> Self::Output

Performs the * operation. Read more

impl<'a, 'b, N, D: DimNameAdd<U1>, C: TCategoryMul<TAffine>> Mul<&'b Transform<N, D, C>> for &'a Translation<N, D>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, D, U1> + Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N, D, DimNameSum<D, U1>>,

type Output = Transform<N, D, <C as TCategoryMul<TAffine>>::Representative>

The resulting type after applying the * operator.

fn mul(self, rhs: &'b Transform<N, D, C>) -> Self::Output

Performs the * operation. Read more

impl<'b, N, D: DimNameAdd<U1>, C: TCategoryMul<TAffine>, R: SubsetOf<MatrixN<N, DimNameSum<D, U1>>>> Mul<&'b Transform<N, D, C>> for Isometry<N, D, R>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, D, U1> + Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N, D, DimNameSum<D, U1>>,

type Output = Transform<N, D, <C as TCategoryMul<TAffine>>::Representative>

The resulting type after applying the * operator.

fn mul(self, rhs: &'b Transform<N, D, C>) -> Self::Output

Performs the * operation. Read more

impl<'b, N, D: DimNameAdd<U1>, C: TCategoryMul<TAffine>> Mul<&'b Transform<N, D, C>> for Rotation<N, D>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, D, D> + Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N, D, DimNameSum<D, U1>>,

type Output = Transform<N, D, <C as TCategoryMul<TAffine>>::Representative>

The resulting type after applying the * operator.

fn mul(self, rhs: &'b Transform<N, D, C>) -> Self::Output

Performs the * operation. Read more

impl<'b, N, D: DimNameAdd<U1>, C: TCategoryMul<TAffine>, R: SubsetOf<MatrixN<N, DimNameSum<D, U1>>>> Mul<&'b Transform<N, D, C>> for Similarity<N, D, R>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, D, U1> + Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N, D, DimNameSum<D, U1>>,

type Output = Transform<N, D, <C as TCategoryMul<TAffine>>::Representative>

The resulting type after applying the * operator.

fn mul(self, rhs: &'b Transform<N, D, C>) -> Self::Output

Performs the * operation. Read more

impl<'b, N, D: DimNameAdd<U1>, C: TCategoryMul<TAffine>> Mul<&'b Transform<N, D, C>> for Translation<N, D>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, D, U1> + Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N, D, DimNameSum<D, U1>>,

type Output = Transform<N, D, <C as TCategoryMul<TAffine>>::Representative>

The resulting type after applying the * operator.

fn mul(self, rhs: &'b Transform<N, D, C>) -> Self::Output

Performs the * operation. Read more

impl<'a, 'b, N, D: DimNameAdd<U1>, CA: TCategoryMul<CB>, CB: TCategory> Mul<&'b Transform<N, D, CB>> for &'a Transform<N, D, CA>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>>,

type Output = Transform<N, D, <CA as TCategoryMul<CB>>::Representative>

The resulting type after applying the * operator.

fn mul(self, rhs: &'b Transform<N, D, CB>) -> Self::Output

Performs the * operation. Read more

impl<'b, N, D: DimNameAdd<U1>, CA: TCategoryMul<CB>, CB: TCategory> Mul<&'b Transform<N, D, CB>> for Transform<N, D, CA>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>>,

type Output = Transform<N, D, <CA as TCategoryMul<CB>>::Representative>

The resulting type after applying the * operator.

fn mul(self, rhs: &'b Transform<N, D, CB>) -> Self::Output

Performs the * operation. Read more

impl<'a, 'b, N, C: TCategoryMul<TAffine>> Mul<&'b Transform<N, U3, C>> for &'a UnitQuaternion<N>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, U4, U1> + Allocator<N, U4, U4>,

type Output = Transform<N, U3, <C as TCategoryMul<TAffine>>::Representative>

The resulting type after applying the * operator.

fn mul(self, rhs: &'b Transform<N, U3, C>) -> Self::Output

Performs the * operation. Read more

impl<'b, N, C: TCategoryMul<TAffine>> Mul<&'b Transform<N, U3, C>> for UnitQuaternion<N>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, U4, U1> + Allocator<N, U4, U4>,

type Output = Transform<N, U3, <C as TCategoryMul<TAffine>>::Representative>

The resulting type after applying the * operator.

fn mul(self, rhs: &'b Transform<N, U3, C>) -> Self::Output

Performs the * operation. Read more

impl<'a, 'b, N, D: DimNameAdd<U1>, C: TCategoryMul<TAffine>> Mul<&'b Translation<N, D>> for &'a Transform<N, D, C>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N, D, U1> + Allocator<N, DimNameSum<D, U1>, U1>,

type Output = Transform<N, D, <C as TCategoryMul<TAffine>>::Representative>

The resulting type after applying the * operator.

fn mul(self, rhs: &'b Translation<N, D>) -> Self::Output

Performs the * operation. Read more

impl<'b, N, D: DimNameAdd<U1>, C: TCategoryMul<TAffine>> Mul<&'b Translation<N, D>> for Transform<N, D, C>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N, D, U1> + Allocator<N, DimNameSum<D, U1>, U1>,

type Output = Transform<N, D, <C as TCategoryMul<TAffine>>::Representative>

The resulting type after applying the * operator.

fn mul(self, rhs: &'b Translation<N, D>) -> Self::Output

Performs the * operation. Read more

impl<'a, 'b, N, C: TCategoryMul<TAffine>> Mul<&'b Unit<Quaternion<N>>> for &'a Transform<N, U3, C>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, U4, U4> + Allocator<N, U4, U1>,

type Output = Transform<N, U3, <C as TCategoryMul<TAffine>>::Representative>

The resulting type after applying the * operator.

fn mul(self, rhs: &'b UnitQuaternion<N>) -> Self::Output

Performs the * operation. Read more

impl<'b, N, C: TCategoryMul<TAffine>> Mul<&'b Unit<Quaternion<N>>> for Transform<N, U3, C>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, U4, U4> + Allocator<N, U4, U1>,

type Output = Transform<N, U3, <C as TCategoryMul<TAffine>>::Representative>

The resulting type after applying the * operator.

fn mul(self, rhs: &'b UnitQuaternion<N>) -> Self::Output

Performs the * operation. Read more

impl<'a, N, D: DimNameAdd<U1>, C: TCategoryMul<TAffine>, R: SubsetOf<MatrixN<N, DimNameSum<D, U1>>>> Mul<Isometry<N, D, R>> for &'a Transform<N, D, C>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N, D, U1> + Allocator<N, DimNameSum<D, U1>, U1>,

type Output = Transform<N, D, <C as TCategoryMul<TAffine>>::Representative>

The resulting type after applying the * operator.

fn mul(self, rhs: Isometry<N, D, R>) -> Self::Output

Performs the * operation. Read more

impl<N, D: DimNameAdd<U1>, C: TCategoryMul<TAffine>, R: SubsetOf<MatrixN<N, DimNameSum<D, U1>>>> Mul<Isometry<N, D, R>> for Transform<N, D, C>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N, D, U1> + Allocator<N, DimNameSum<D, U1>, U1>,

type Output = Transform<N, D, <C as TCategoryMul<TAffine>>::Representative>

The resulting type after applying the * operator.

fn mul(self, rhs: Isometry<N, D, R>) -> Self::Output

Performs the * operation. Read more

impl<'a, N, D: DimNameAdd<U1>, C: TCategory> Mul<Matrix<N, D, U1, <DefaultAllocator as Allocator<N, D, U1>>::Buffer>> for &'a Transform<N, D, C>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N, D, U1> + Allocator<N, DimNameSum<D, U1>, U1>,

type Output = Matrix<N, D, U1, <DefaultAllocator as Allocator<N, D, U1>>::Buffer>

The resulting type after applying the * operator.

fn mul(self, rhs: VectorN<N, D>) -> Self::Output

Performs the * operation. Read more

impl<N, D: DimNameAdd<U1>, C: TCategory> Mul<Matrix<N, D, U1, <DefaultAllocator as Allocator<N, D, U1>>::Buffer>> for Transform<N, D, C>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N, D, U1> + Allocator<N, DimNameSum<D, U1>, U1>,

type Output = Matrix<N, D, U1, <DefaultAllocator as Allocator<N, D, U1>>::Buffer>

The resulting type after applying the * operator.

fn mul(self, rhs: VectorN<N, D>) -> Self::Output

Performs the * operation. Read more

impl<'a, N, D: DimNameAdd<U1>, C: TCategory> Mul<Point<N, D>> for &'a Transform<N, D, C>where
 N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
 DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N, D, U1> + Allocator<N, DimNameSum<D, U1>, U1>,
 DefaultAllocator: Allocator<N, D, D>,

type Output = Point<N, D>

The resulting type after applying the * operator.

fn mul(self, rhs: Point<N, D>) -> Self::Output

Performs the * operation. Read more

impl<N, D: DimNameAdd<U1>, C: TCategory> Mul<Point<N, D>> for Transform<N, D, C>where
 N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
 DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N, D, U1> + Allocator<N, DimNameSum<D, U1>, U1>,
 DefaultAllocator: Allocator<N, D, D>,

type Output = Point<N, D>

The resulting type after applying the * operator.

fn mul(self, rhs: Point<N, D>) -> Self::Output

Performs the * operation. Read more

impl<'a, N, D: DimNameAdd<U1>, C: TCategoryMul<TAffine>> Mul<Rotation<N, D>> for &'a Transform<N, D, C>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N, D, D> + Allocator<N, DimNameSum<D, U1>, D>,

type Output = Transform<N, D, <C as TCategoryMul<TAffine>>::Representative>

The resulting type after applying the * operator.

fn mul(self, rhs: Rotation<N, D>) -> Self::Output

Performs the * operation. Read more

impl<N, D: DimNameAdd<U1>, C: TCategoryMul<TAffine>> Mul<Rotation<N, D>> for Transform<N, D, C>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N, D, D> + Allocator<N, DimNameSum<D, U1>, D>,

type Output = Transform<N, D, <C as TCategoryMul<TAffine>>::Representative>

The resulting type after applying the * operator.

fn mul(self, rhs: Rotation<N, D>) -> Self::Output

Performs the * operation. Read more

impl<'a, N, D: DimNameAdd<U1>, C: TCategoryMul<TAffine>, R: SubsetOf<MatrixN<N, DimNameSum<D, U1>>>> Mul<Similarity<N, D, R>> for &'a Transform<N, D, C>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N, D, U1> + Allocator<N, DimNameSum<D, U1>, U1>,

type Output = Transform<N, D, <C as TCategoryMul<TAffine>>::Representative>

The resulting type after applying the * operator.

fn mul(self, rhs: Similarity<N, D, R>) -> Self::Output

Performs the * operation. Read more

impl<N, D: DimNameAdd<U1>, C: TCategoryMul<TAffine>, R: SubsetOf<MatrixN<N, DimNameSum<D, U1>>>> Mul<Similarity<N, D, R>> for Transform<N, D, C>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N, D, U1> + Allocator<N, DimNameSum<D, U1>, U1>,

type Output = Transform<N, D, <C as TCategoryMul<TAffine>>::Representative>

The resulting type after applying the * operator.

fn mul(self, rhs: Similarity<N, D, R>) -> Self::Output

Performs the * operation. Read more

impl<'a, N, D: DimNameAdd<U1>, C: TCategoryMul<TAffine>, R: SubsetOf<MatrixN<N, DimNameSum<D, U1>>>> Mul<Transform<N, D, C>> for &'a Isometry<N, D, R>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, D, U1> + Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N, D, DimNameSum<D, U1>>,

type Output = Transform<N, D, <C as TCategoryMul<TAffine>>::Representative>

The resulting type after applying the * operator.

fn mul(self, rhs: Transform<N, D, C>) -> Self::Output

Performs the * operation. Read more

impl<'a, N, D: DimNameAdd<U1>, C: TCategoryMul<TAffine>> Mul<Transform<N, D, C>> for &'a Rotation<N, D>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, D, D> + Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N, D, DimNameSum<D, U1>>,

type Output = Transform<N, D, <C as TCategoryMul<TAffine>>::Representative>

The resulting type after applying the * operator.

fn mul(self, rhs: Transform<N, D, C>) -> Self::Output

Performs the * operation. Read more

impl<'a, N, D: DimNameAdd<U1>, C: TCategoryMul<TAffine>, R: SubsetOf<MatrixN<N, DimNameSum<D, U1>>>> Mul<Transform<N, D, C>> for &'a Similarity<N, D, R>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, D, U1> + Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N, D, DimNameSum<D, U1>>,

type Output = Transform<N, D, <C as TCategoryMul<TAffine>>::Representative>

The resulting type after applying the * operator.

fn mul(self, rhs: Transform<N, D, C>) -> Self::Output

Performs the * operation. Read more

impl<'a, N, D: DimNameAdd<U1>, C: TCategoryMul<TAffine>> Mul<Transform<N, D, C>> for &'a Translation<N, D>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, D, U1> + Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N, D, DimNameSum<D, U1>>,

type Output = Transform<N, D, <C as TCategoryMul<TAffine>>::Representative>

The resulting type after applying the * operator.

fn mul(self, rhs: Transform<N, D, C>) -> Self::Output

Performs the * operation. Read more

impl<N, D: DimNameAdd<U1>, C: TCategoryMul<TAffine>, R: SubsetOf<MatrixN<N, DimNameSum<D, U1>>>> Mul<Transform<N, D, C>> for Isometry<N, D, R>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, D, U1> + Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N, D, DimNameSum<D, U1>>,

type Output = Transform<N, D, <C as TCategoryMul<TAffine>>::Representative>

The resulting type after applying the * operator.

fn mul(self, rhs: Transform<N, D, C>) -> Self::Output

Performs the * operation. Read more

impl<N, D: DimNameAdd<U1>, C: TCategoryMul<TAffine>> Mul<Transform<N, D, C>> for Rotation<N, D>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, D, D> + Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N, D, DimNameSum<D, U1>>,

type Output = Transform<N, D, <C as TCategoryMul<TAffine>>::Representative>

The resulting type after applying the * operator.

fn mul(self, rhs: Transform<N, D, C>) -> Self::Output

Performs the * operation. Read more

impl<N, D: DimNameAdd<U1>, C: TCategoryMul<TAffine>, R: SubsetOf<MatrixN<N, DimNameSum<D, U1>>>> Mul<Transform<N, D, C>> for Similarity<N, D, R>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, D, U1> + Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N, D, DimNameSum<D, U1>>,

type Output = Transform<N, D, <C as TCategoryMul<TAffine>>::Representative>

The resulting type after applying the * operator.

fn mul(self, rhs: Transform<N, D, C>) -> Self::Output

Performs the * operation. Read more

impl<N, D: DimNameAdd<U1>, C: TCategoryMul<TAffine>> Mul<Transform<N, D, C>> for Translation<N, D>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, D, U1> + Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N, D, DimNameSum<D, U1>>,

type Output = Transform<N, D, <C as TCategoryMul<TAffine>>::Representative>

The resulting type after applying the * operator.

fn mul(self, rhs: Transform<N, D, C>) -> Self::Output

Performs the * operation. Read more

impl<'a, N, D: DimNameAdd<U1>, CA: TCategoryMul<CB>, CB: TCategory> Mul<Transform<N, D, CB>> for &'a Transform<N, D, CA>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>>,

type Output = Transform<N, D, <CA as TCategoryMul<CB>>::Representative>

The resulting type after applying the * operator.

fn mul(self, rhs: Transform<N, D, CB>) -> Self::Output

Performs the * operation. Read more

impl<N, D: DimNameAdd<U1>, CA: TCategoryMul<CB>, CB: TCategory> Mul<Transform<N, D, CB>> for Transform<N, D, CA>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>>,

type Output = Transform<N, D, <CA as TCategoryMul<CB>>::Representative>

The resulting type after applying the * operator.

fn mul(self, rhs: Transform<N, D, CB>) -> Self::Output

Performs the * operation. Read more

impl<'a, N, C: TCategoryMul<TAffine>> Mul<Transform<N, U3, C>> for &'a UnitQuaternion<N>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, U4, U1> + Allocator<N, U4, U4>,

type Output = Transform<N, U3, <C as TCategoryMul<TAffine>>::Representative>

The resulting type after applying the * operator.

fn mul(self, rhs: Transform<N, U3, C>) -> Self::Output

Performs the * operation. Read more

impl<N, C: TCategoryMul<TAffine>> Mul<Transform<N, U3, C>> for UnitQuaternion<N>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, U4, U1> + Allocator<N, U4, U4>,

type Output = Transform<N, U3, <C as TCategoryMul<TAffine>>::Representative>

The resulting type after applying the * operator.

fn mul(self, rhs: Transform<N, U3, C>) -> Self::Output

Performs the * operation. Read more

impl<'a, N, D: DimNameAdd<U1>, C: TCategoryMul<TAffine>> Mul<Translation<N, D>> for &'a Transform<N, D, C>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N, D, U1> + Allocator<N, DimNameSum<D, U1>, U1>,

type Output = Transform<N, D, <C as TCategoryMul<TAffine>>::Representative>

The resulting type after applying the * operator.

fn mul(self, rhs: Translation<N, D>) -> Self::Output

Performs the * operation. Read more

impl<N, D: DimNameAdd<U1>, C: TCategoryMul<TAffine>> Mul<Translation<N, D>> for Transform<N, D, C>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N, D, U1> + Allocator<N, DimNameSum<D, U1>, U1>,

type Output = Transform<N, D, <C as TCategoryMul<TAffine>>::Representative>

The resulting type after applying the * operator.

fn mul(self, rhs: Translation<N, D>) -> Self::Output

Performs the * operation. Read more

impl<'a, N, C: TCategoryMul<TAffine>> Mul<Unit<Quaternion<N>>> for &'a Transform<N, U3, C>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, U4, U4> + Allocator<N, U4, U1>,

type Output = Transform<N, U3, <C as TCategoryMul<TAffine>>::Representative>

The resulting type after applying the * operator.

fn mul(self, rhs: UnitQuaternion<N>) -> Self::Output

Performs the * operation. Read more

impl<N, C: TCategoryMul<TAffine>> Mul<Unit<Quaternion<N>>> for Transform<N, U3, C>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, U4, U4> + Allocator<N, U4, U1>,

type Output = Transform<N, U3, <C as TCategoryMul<TAffine>>::Representative>

The resulting type after applying the * operator.

fn mul(self, rhs: UnitQuaternion<N>) -> Self::Output

Performs the * operation. Read more

impl<'b, N, D: DimNameAdd<U1>, C: TCategory, R: SubsetOf<MatrixN<N, DimNameSum<D, U1>>>> MulAssign<&'b Isometry<N, D, R>> for Transform<N, D, C>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N, D, U1>,

fn mul_assign(&mut self, rhs: &'b Isometry<N, D, R>)

Performs the *= operation. Read more

impl<'b, N, D: DimNameAdd<U1>, C: TCategory> MulAssign<&'b Rotation<N, D>> for Transform<N, D, C>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N, D, D>,

fn mul_assign(&mut self, rhs: &'b Rotation<N, D>)

Performs the *= operation. Read more

impl<'b, N, D: DimNameAdd<U1>, C: TCategory, R: SubsetOf<MatrixN<N, DimNameSum<D, U1>>>> MulAssign<&'b Similarity<N, D, R>> for Transform<N, D, C>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N, D, U1>,

fn mul_assign(&mut self, rhs: &'b Similarity<N, D, R>)

Performs the *= operation. Read more

impl<'b, N, D: DimNameAdd<U1>, CA: TCategory, CB: SubTCategoryOf<CA>> MulAssign<&'b Transform<N, D, CB>> for Transform<N, D, CA>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>>,

fn mul_assign(&mut self, rhs: &'b Transform<N, D, CB>)

Performs the *= operation. Read more

impl<'b, N, D: DimNameAdd<U1>, C: TCategory> MulAssign<&'b Translation<N, D>> for Transform<N, D, C>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N, D, U1>,

fn mul_assign(&mut self, rhs: &'b Translation<N, D>)

Performs the *= operation. Read more

impl<'b, N, C: TCategory> MulAssign<&'b Unit<Quaternion<N>>> for Transform<N, U3, C>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, U4, U4> + Allocator<N, U4, U1>,

fn mul_assign(&mut self, rhs: &'b UnitQuaternion<N>)

Performs the *= operation. Read more

impl<N, D: DimNameAdd<U1>, C: TCategory, R: SubsetOf<MatrixN<N, DimNameSum<D, U1>>>> MulAssign<Isometry<N, D, R>> for Transform<N, D, C>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N, D, U1>,

fn mul_assign(&mut self, rhs: Isometry<N, D, R>)

Performs the *= operation. Read more

impl<N, D: DimNameAdd<U1>, C: TCategory> MulAssign<Rotation<N, D>> for Transform<N, D, C>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N, D, D>,

fn mul_assign(&mut self, rhs: Rotation<N, D>)

Performs the *= operation. Read more

impl<N, D: DimNameAdd<U1>, C: TCategory, R: SubsetOf<MatrixN<N, DimNameSum<D, U1>>>> MulAssign<Similarity<N, D, R>> for Transform<N, D, C>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N, D, U1>,

fn mul_assign(&mut self, rhs: Similarity<N, D, R>)

Performs the *= operation. Read more

impl<N, D: DimNameAdd<U1>, CA: TCategory, CB: SubTCategoryOf<CA>> MulAssign<Transform<N, D, CB>> for Transform<N, D, CA>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>>,

fn mul_assign(&mut self, rhs: Transform<N, D, CB>)

Performs the *= operation. Read more

impl<N, D: DimNameAdd<U1>, C: TCategory> MulAssign<Translation<N, D>> for Transform<N, D, C>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N, D, U1>,

fn mul_assign(&mut self, rhs: Translation<N, D>)

Performs the *= operation. Read more

impl<N, C: TCategory> MulAssign<Unit<Quaternion<N>>> for Transform<N, U3, C>where
N: Scalar + Zero + One + ClosedAdd + ClosedMul + Real,
DefaultAllocator: Allocator<N, U4, U4> + Allocator<N, U4, U1>,

fn mul_assign(&mut self, rhs: UnitQuaternion<N>)

Performs the *= operation. Read more

impl<N: Real, D: DimNameAdd<U1>, C: TCategory> One for Transform<N, D, C>where
DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>>,

fn one() -> Self

Creates a new identity transform.

fn set_one(&mut self)

Sets self to the multiplicative identity element of Self, 1.

fn is_one(&self) -> boolwhere
Self: PartialEq<Self>,

Returns true if self is equal to the multiplicative identity. Read more

impl<N: Real, D: DimNameAdd<U1>, C: TCategory> PartialEq<Transform<N, D, C>> for Transform<N, D, C>where
DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>>,

fn eq(&self, right: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==. Read more

1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason. Read more

impl<N, D: DimNameAdd<U1>, C> ProjectiveTransformation<Point<N, D>> for Transform<N, D, C>where
 N: Real,
 C: SubTCategoryOf<TProjective>,
 DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N, DimNameSum<D, U1>> + Allocator<N, D, D> + Allocator<N, D>,

fn inverse_transform_point(&self, pt: &Point<N, D>) -> Point<N, D>

Applies this group’s inverse action on a point from the euclidean space.

fn inverse_transform_vector(&self, v: &VectorN<N, D>) -> VectorN<N, D>

Applies this group’s inverse action on a vector from the euclidean space. Read more

impl<N1, N2, D: DimName, C> SubsetOf<Matrix<N2, <D as DimNameAdd<U1>>::Output, <D as DimNameAdd<U1>>::Output, <DefaultAllocator as Allocator<N2, <D as DimNameAdd<U1>>::Output, <D as DimNameAdd<U1>>::Output>>::Buffer>> for Transform<N1, D, C>where
 N1: Real + SubsetOf<N2>,
 N2: Real,
 C: TCategory,
 D: DimNameAdd<U1>,
 DefaultAllocator: Allocator<N1, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N2, DimNameSum<D, U1>, DimNameSum<D, U1>>,
 N1::Epsilon: Copy,
 N2::Epsilon: Copy,

fn to_superset(&self) -> MatrixN<N2, DimNameSum<D, U1>>

The inclusion map: converts self to the equivalent element of its superset.

fn is_in_subset(m: &MatrixN<N2, DimNameSum<D, U1>>) -> bool

Checks if element is actually part of the subset Self (and can be converted to it).

unsafe fn from_superset_unchecked(m: &MatrixN<N2, DimNameSum<D, U1>>) -> Self

Use with care! Same as self.to_superset but without any property checks. Always succeeds.

fn from_superset(element: &T) -> Option<Self>

The inverse inclusion map: attempts to construct self from the equivalent element of its superset. Read more

impl<N1, N2, D, R, C> SubsetOf<Transform<N2, D, C>> for Isometry<N1, D, R>where
 N1: Real,
 N2: Real + SupersetOf<N1>,
 C: SuperTCategoryOf<TAffine>,
 R: Rotation<Point<N1, D>> + SubsetOf<MatrixN<N1, DimNameSum<D, U1>>> + SubsetOf<MatrixN<N2, DimNameSum<D, U1>>>,
 D: DimNameAdd<U1> + DimMin<D, Output = D>,
 DefaultAllocator: Allocator<N1, D> + Allocator<N1, D, D> + Allocator<N1, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N2, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<(usize, usize), D> + Allocator<N2, D, D> + Allocator<N2, D>,

fn to_superset(&self) -> Transform<N2, D, C>

The inclusion map: converts self to the equivalent element of its superset.

fn is_in_subset(t: &Transform<N2, D, C>) -> bool

Checks if element is actually part of the subset Self (and can be converted to it).

unsafe fn from_superset_unchecked(t: &Transform<N2, D, C>) -> Self

Use with care! Same as self.to_superset but without any property checks. Always succeeds.

fn from_superset(element: &T) -> Option<Self>

The inverse inclusion map: attempts to construct self from the equivalent element of its superset. Read more

impl<N1, N2, D, C> SubsetOf<Transform<N2, D, C>> for Rotation<N1, D>where
 N1: Real,
 N2: Real + SupersetOf<N1>,
 C: SuperTCategoryOf<TAffine>,
 D: DimNameAdd<U1> + DimMin<D, Output = D>,
 DefaultAllocator: Allocator<N1, D, D> + Allocator<N2, D, D> + Allocator<N1, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N2, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<(usize, usize), D>,

fn to_superset(&self) -> Transform<N2, D, C>

The inclusion map: converts self to the equivalent element of its superset.

fn is_in_subset(t: &Transform<N2, D, C>) -> bool

Checks if element is actually part of the subset Self (and can be converted to it).

unsafe fn from_superset_unchecked(t: &Transform<N2, D, C>) -> Self

Use with care! Same as self.to_superset but without any property checks. Always succeeds.

fn from_superset(element: &T) -> Option<Self>

The inverse inclusion map: attempts to construct self from the equivalent element of its superset. Read more

impl<N1, N2, D, R, C> SubsetOf<Transform<N2, D, C>> for Similarity<N1, D, R>where
 N1: Real,
 N2: Real + SupersetOf<N1>,
 C: SuperTCategoryOf<TAffine>,
 R: Rotation<Point<N1, D>> + SubsetOf<MatrixN<N1, DimNameSum<D, U1>>> + SubsetOf<MatrixN<N2, DimNameSum<D, U1>>>,
 D: DimNameAdd<U1> + DimMin<D, Output = D>,
 DefaultAllocator: Allocator<N1, D> + Allocator<N1, D, D> + Allocator<N1, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N2, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<(usize, usize), D> + Allocator<N2, D, D> + Allocator<N2, D>,

fn to_superset(&self) -> Transform<N2, D, C>

The inclusion map: converts self to the equivalent element of its superset.

fn is_in_subset(t: &Transform<N2, D, C>) -> bool

Checks if element is actually part of the subset Self (and can be converted to it).

unsafe fn from_superset_unchecked(t: &Transform<N2, D, C>) -> Self

Use with care! Same as self.to_superset but without any property checks. Always succeeds.

fn from_superset(element: &T) -> Option<Self>

The inverse inclusion map: attempts to construct self from the equivalent element of its superset. Read more

impl<N1, N2, D, C> SubsetOf<Transform<N2, D, C>> for Translation<N1, D>where
 N1: Real,
 N2: Real + SupersetOf<N1>,
 C: SuperTCategoryOf<TAffine>,
 D: DimNameAdd<U1>,
 DefaultAllocator: Allocator<N1, D> + Allocator<N2, D> + Allocator<N1, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N2, DimNameSum<D, U1>, DimNameSum<D, U1>>,

fn to_superset(&self) -> Transform<N2, D, C>

The inclusion map: converts self to the equivalent element of its superset.

fn is_in_subset(t: &Transform<N2, D, C>) -> bool

Checks if element is actually part of the subset Self (and can be converted to it).

unsafe fn from_superset_unchecked(t: &Transform<N2, D, C>) -> Self

Use with care! Same as self.to_superset but without any property checks. Always succeeds.

fn from_superset(element: &T) -> Option<Self>

The inverse inclusion map: attempts to construct self from the equivalent element of its superset. Read more

impl<N1, N2, D: DimName, C1, C2> SubsetOf<Transform<N2, D, C2>> for Transform<N1, D, C1>where
 N1: Real + SubsetOf<N2>,
 N2: Real,
 C1: TCategory,
 C2: SuperTCategoryOf<C1>,
 D: DimNameAdd<U1>,
 DefaultAllocator: Allocator<N1, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N2, DimNameSum<D, U1>, DimNameSum<D, U1>>,
 N1::Epsilon: Copy,
 N2::Epsilon: Copy,

fn to_superset(&self) -> Transform<N2, D, C2>

The inclusion map: converts self to the equivalent element of its superset.

fn is_in_subset(t: &Transform<N2, D, C2>) -> bool

Checks if element is actually part of the subset Self (and can be converted to it).

unsafe fn from_superset_unchecked(t: &Transform<N2, D, C2>) -> Self

Use with care! Same as self.to_superset but without any property checks. Always succeeds.

fn from_superset(element: &T) -> Option<Self>

The inverse inclusion map: attempts to construct self from the equivalent element of its superset. Read more

impl<N1, N2, C> SubsetOf<Transform<N2, U2, C>> for UnitComplex<N1>where
 N1: Real,
 N2: Real + SupersetOf<N1>,
 C: SuperTCategoryOf<TAffine>,

fn to_superset(&self) -> Transform<N2, U2, C>

The inclusion map: converts self to the equivalent element of its superset.

fn is_in_subset(t: &Transform<N2, U2, C>) -> bool

Checks if element is actually part of the subset Self (and can be converted to it).

unsafe fn from_superset_unchecked(t: &Transform<N2, U2, C>) -> Self

Use with care! Same as self.to_superset but without any property checks. Always succeeds.

fn from_superset(element: &T) -> Option<Self>

The inverse inclusion map: attempts to construct self from the equivalent element of its superset. Read more

impl<N1, N2, C> SubsetOf<Transform<N2, U3, C>> for UnitQuaternion<N1>where
 N1: Real,
 N2: Real + SupersetOf<N1>,
 C: SuperTCategoryOf<TAffine>,

fn to_superset(&self) -> Transform<N2, U3, C>

The inclusion map: converts self to the equivalent element of its superset.

fn is_in_subset(t: &Transform<N2, U3, C>) -> bool

Checks if element is actually part of the subset Self (and can be converted to it).

unsafe fn from_superset_unchecked(t: &Transform<N2, U3, C>) -> Self

Use with care! Same as self.to_superset but without any property checks. Always succeeds.

fn from_superset(element: &T) -> Option<Self>

The inverse inclusion map: attempts to construct self from the equivalent element of its superset. Read more

impl<N, D: DimNameAdd<U1>, C> Transformation<Point<N, D>> for Transform<N, D, C>where
 N: Real,
 C: TCategory,
 DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>> + Allocator<N, DimNameSum<D, U1>> + Allocator<N, D, D> + Allocator<N, D>,

fn transform_point(&self, pt: &Point<N, D>) -> Point<N, D>

Applies this group’s action on a point from the euclidean space.

fn transform_vector(&self, v: &VectorN<N, D>) -> VectorN<N, D>

Applies this group’s action on a vector from the euclidean space. Read more

impl<N: Real, D: DimNameAdd<U1>, C> AbstractGroup<Multiplicative> for Transform<N, D, C>where
C: SubTCategoryOf<TProjective>,
DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>>,

impl<N: Real, D: DimNameAdd<U1>, C> AbstractLoop<Multiplicative> for Transform<N, D, C>where
C: SubTCategoryOf<TProjective>,
DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>>,

impl<N: Real, D: DimNameAdd<U1>, C> AbstractMonoid<Multiplicative> for Transform<N, D, C>where
C: TCategory,
DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>>,

impl<N: Real, D: DimNameAdd<U1>, C> AbstractQuasigroup<Multiplicative> for Transform<N, D, C>where
C: SubTCategoryOf<TProjective>,
DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>>,

impl<N: Real, D: DimNameAdd<U1>, C> AbstractSemigroup<Multiplicative> for Transform<N, D, C>where
C: TCategory,
DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>>,

impl<N: Real, D: DimNameAdd<U1> + Copy, C: TCategory> Copy for Transform<N, D, C>where
DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>>,
Owned<N, DimNameSum<D, U1>, DimNameSum<D, U1>>: Copy,

impl<N: Real + Eq, D: DimNameAdd<U1>, C: TCategory> Eq for Transform<N, D, C>where
DefaultAllocator: Allocator<N, DimNameSum<D, U1>, DimNameSum<D, U1>>,

Auto Trait Implementations§

impl<N, D, C> !UnwindSafe for Transform<N, D, C>

Blanket Implementations§

impl<T> Any for Twhere
T: 'static + ?Sized,

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more

impl<T> Borrow<T> for Twhere
T: ?Sized,

const: unstable · source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more

impl<T> BorrowMut<T> for Twhere
T: ?Sized,

const: unstable · source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more

impl<T> From<T> for T

const: unstable · source§

fn from(t: T) -> T

Returns the argument unchanged.

impl<T, U> Into for Twhere
U: From<T>,

const: unstable · source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

impl<T> Same<T> for T

type Output = T

Should always be Self

impl<SS, SP> SupersetOf<SS> for SPwhere
SS: SubsetOf<SP>,

fn to_subset(&self) -> Option<SS>

The inverse inclusion map: attempts to construct self from the equivalent element of its superset. Read more

fn is_in_subset(&self) -> bool

Checks if self is actually part of its subset T (and can be converted to it).

unsafe fn to_subset_unchecked(&self) -> SS

Use with care! Same as self.to_subset but without any property checks. Always succeeds.

fn from_subset(element: &SS) -> SP

The inclusion map: converts self to the equivalent element of its superset.

impl<T> ToOwned for Twhere
T: Clone,

type Owned = T

The resulting type after obtaining ownership.

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more

impl<T, U> TryFrom for Twhere
U: Into<T>,

type Error = Infallible

The type returned in the event of a conversion error.

const: unstable · source§

fn try_from(value: U) -> Result<T, <T as TryFrom>::Error>

Performs the conversion.

impl<T, U> TryInto for Twhere
U: TryFrom<T>,

type Error = >::Error

The type returned in the event of a conversion error.

const: unstable · source§

fn try_into(self) -> Result<U, >::Error>

Performs the conversion.

impl<T, Right> ClosedDiv<Right> for Twhere
T: Div<Right, Output = T> + DivAssign<Right>,

impl<T, Right> ClosedMul<Right> for Twhere
T: Mul<Right, Output = T> + MulAssign<Right>,

impl<T> MultiplicativeGroup for Twhere
T: AbstractGroup<Multiplicative> + MultiplicativeLoop + MultiplicativeMonoid,

impl<T> MultiplicativeLoop for Twhere
T: AbstractLoop<Multiplicative> + MultiplicativeQuasigroup + One,

impl<T> MultiplicativeMagma for Twhere
T: AbstractMagma<Multiplicative>,

impl<T> MultiplicativeMonoid for Twhere
T: AbstractMonoid<Multiplicative> + MultiplicativeSemigroup + One,

impl<T> MultiplicativeQuasigroup for Twhere
T: AbstractQuasigroup<Multiplicative> + MultiplicativeMagma + ClosedDiv<T>,