#[repr(C)]
#[doc = "Register block"]
pub struct RegisterBlock {
value: Value,
top: Top,
prescale: Prescale,
control: Control,
enable: Enable,
int_mask: IntMask,
int_clear: IntClear,
int_flag: IntFlag,
_reserved8: [u8; 0x60],
ch1_cntr: Ch1Cntr,
ch1_ocr: Ch1Ocr,
ch1_icr: Ch1Icr,
_reserved11: [u8; 0x04],
ch2_cntr: Ch2Cntr,
ch2_ocr: Ch2Ocr,
ch2_icr: Ch2Icr,
_reserved14: [u8; 0x04],
ch3_cntr: Ch3Cntr,
ch3_ocr: Ch3Ocr,
ch3_icr: Ch3Icr,
_reserved17: [u8; 0x04],
ch4_cntr: Ch4Cntr,
ch4_ocr: Ch4Ocr,
ch4_icr: Ch4Icr,
}
impl RegisterBlock {
#[doc = "0x00 - "]
#[inline(always)]
pub const fn value(&self) -> &Value {
&self.value
}
#[doc = "0x04 - максимальное значение счетной последовательности"]
#[inline(always)]
pub const fn top(&self) -> &Top {
&self.top
}
#[doc = "0x08 - значение делителя"]
#[inline(always)]
pub const fn prescale(&self) -> &Prescale {
&self.prescale
}
#[doc = "0x0c - Конфигурационный регистр основного таймера"]
#[inline(always)]
pub const fn control(&self) -> &Control {
&self.control
}
#[doc = "0x10 - Регистр включения таймера"]
#[inline(always)]
pub const fn enable(&self) -> &Enable {
&self.enable
}
#[doc = "0x14 - Регистр маски прерываний"]
#[inline(always)]
pub const fn int_mask(&self) -> &IntMask {
&self.int_mask
}
#[doc = "0x18 - Регистр сброса флагов прерываний"]
#[inline(always)]
pub const fn int_clear(&self) -> &IntClear {
&self.int_clear
}
#[doc = "0x1c - Регистр флагов прерываний"]
#[inline(always)]
pub const fn int_flag(&self) -> &IntFlag {
&self.int_flag
}
#[doc = "0x80 - Конфигурационный регистр 1 канала"]
#[inline(always)]
pub const fn ch1_cntr(&self) -> &Ch1Cntr {
&self.ch1_cntr
}
#[doc = "0x84 - Значение сравнения 1 канала"]
#[inline(always)]
pub const fn ch1_ocr(&self) -> &Ch1Ocr {
&self.ch1_ocr
}
#[doc = "0x88 - Значение захвата 1 канала"]
#[inline(always)]
pub const fn ch1_icr(&self) -> &Ch1Icr {
&self.ch1_icr
}
#[doc = "0x90 - Конфигурационный регистр 2 канала"]
#[inline(always)]
pub const fn ch2_cntr(&self) -> &Ch2Cntr {
&self.ch2_cntr
}
#[doc = "0x94 - Значение сравнения 2 канала"]
#[inline(always)]
pub const fn ch2_ocr(&self) -> &Ch2Ocr {
&self.ch2_ocr
}
#[doc = "0x98 - Значение захвата 2 канала"]
#[inline(always)]
pub const fn ch2_icr(&self) -> &Ch2Icr {
&self.ch2_icr
}
#[doc = "0xa0 - Конфигурационный регистр 3 канала"]
#[inline(always)]
pub const fn ch3_cntr(&self) -> &Ch3Cntr {
&self.ch3_cntr
}
#[doc = "0xa4 - Значение сравнения 3 канала"]
#[inline(always)]
pub const fn ch3_ocr(&self) -> &Ch3Ocr {
&self.ch3_ocr
}
#[doc = "0xa8 - Значение захвата 3 канала"]
#[inline(always)]
pub const fn ch3_icr(&self) -> &Ch3Icr {
&self.ch3_icr
}
#[doc = "0xb0 - Конфигурационный регистр 4 канала"]
#[inline(always)]
pub const fn ch4_cntr(&self) -> &Ch4Cntr {
&self.ch4_cntr
}
#[doc = "0xb4 - Значение сравнения 4 канала"]
#[inline(always)]
pub const fn ch4_ocr(&self) -> &Ch4Ocr {
&self.ch4_ocr
}
#[doc = "0xb8 - Значение захвата 4 канала"]
#[inline(always)]
pub const fn ch4_icr(&self) -> &Ch4Icr {
&self.ch4_icr
}
}
#[doc = "VALUE (rw) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`value::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`value::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@value`] module"]
#[doc(alias = "VALUE")]
pub type Value = crate::Reg<value::ValueSpec>;
#[doc = ""]
pub mod value;
#[doc = "TOP (rw) register accessor: максимальное значение счетной последовательности\n\nYou can [`read`](crate::Reg::read) this register and get [`top::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`top::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@top`] module"]
#[doc(alias = "TOP")]
pub type Top = crate::Reg<top::TopSpec>;
#[doc = "максимальное значение счетной последовательности"]
pub mod top;
#[doc = "PRESCALE (rw) register accessor: значение делителя\n\nYou can [`read`](crate::Reg::read) this register and get [`prescale::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`prescale::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@prescale`] module"]
#[doc(alias = "PRESCALE")]
pub type Prescale = crate::Reg<prescale::PrescaleSpec>;
#[doc = "значение делителя"]
pub mod prescale;
#[doc = "CONTROL (rw) register accessor: Конфигурационный регистр основного таймера\n\nYou can [`read`](crate::Reg::read) this register and get [`control::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`control::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@control`] module"]
#[doc(alias = "CONTROL")]
pub type Control = crate::Reg<control::ControlSpec>;
#[doc = "Конфигурационный регистр основного таймера"]
pub mod control;
#[doc = "ENABLE (rw) register accessor: Регистр включения таймера\n\nYou can [`read`](crate::Reg::read) this register and get [`enable::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`enable::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@enable`] module"]
#[doc(alias = "ENABLE")]
pub type Enable = crate::Reg<enable::EnableSpec>;
#[doc = "Регистр включения таймера"]
pub mod enable;
#[doc = "INT_MASK (rw) register accessor: Регистр маски прерываний\n\nYou can [`read`](crate::Reg::read) this register and get [`int_mask::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`int_mask::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@int_mask`] module"]
#[doc(alias = "INT_MASK")]
pub type IntMask = crate::Reg<int_mask::IntMaskSpec>;
#[doc = "Регистр маски прерываний"]
pub mod int_mask;
#[doc = "INT_CLEAR (rw) register accessor: Регистр сброса флагов прерываний\n\nYou can [`read`](crate::Reg::read) this register and get [`int_clear::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`int_clear::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@int_clear`] module"]
#[doc(alias = "INT_CLEAR")]
pub type IntClear = crate::Reg<int_clear::IntClearSpec>;
#[doc = "Регистр сброса флагов прерываний"]
pub mod int_clear;
#[doc = "INT_FLAG (rw) register accessor: Регистр флагов прерываний\n\nYou can [`read`](crate::Reg::read) this register and get [`int_flag::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`int_flag::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@int_flag`] module"]
#[doc(alias = "INT_FLAG")]
pub type IntFlag = crate::Reg<int_flag::IntFlagSpec>;
#[doc = "Регистр флагов прерываний"]
pub mod int_flag;
#[doc = "CH1_CNTR (rw) register accessor: Конфигурационный регистр 1 канала\n\nYou can [`read`](crate::Reg::read) this register and get [`ch1_cntr::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`ch1_cntr::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ch1_cntr`] module"]
#[doc(alias = "CH1_CNTR")]
pub type Ch1Cntr = crate::Reg<ch1_cntr::Ch1CntrSpec>;
#[doc = "Конфигурационный регистр 1 канала"]
pub mod ch1_cntr;
#[doc = "CH1_OCR (rw) register accessor: Значение сравнения 1 канала\n\nYou can [`read`](crate::Reg::read) this register and get [`ch1_ocr::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`ch1_ocr::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ch1_ocr`] module"]
#[doc(alias = "CH1_OCR")]
pub type Ch1Ocr = crate::Reg<ch1_ocr::Ch1OcrSpec>;
#[doc = "Значение сравнения 1 канала"]
pub mod ch1_ocr;
#[doc = "CH1_ICR (rw) register accessor: Значение захвата 1 канала\n\nYou can [`read`](crate::Reg::read) this register and get [`ch1_icr::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`ch1_icr::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ch1_icr`] module"]
#[doc(alias = "CH1_ICR")]
pub type Ch1Icr = crate::Reg<ch1_icr::Ch1IcrSpec>;
#[doc = "Значение захвата 1 канала"]
pub mod ch1_icr;
#[doc = "CH2_CNTR (rw) register accessor: Конфигурационный регистр 2 канала\n\nYou can [`read`](crate::Reg::read) this register and get [`ch2_cntr::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`ch2_cntr::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ch2_cntr`] module"]
#[doc(alias = "CH2_CNTR")]
pub type Ch2Cntr = crate::Reg<ch2_cntr::Ch2CntrSpec>;
#[doc = "Конфигурационный регистр 2 канала"]
pub mod ch2_cntr;
#[doc = "CH2_OCR (rw) register accessor: Значение сравнения 2 канала\n\nYou can [`read`](crate::Reg::read) this register and get [`ch2_ocr::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`ch2_ocr::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ch2_ocr`] module"]
#[doc(alias = "CH2_OCR")]
pub type Ch2Ocr = crate::Reg<ch2_ocr::Ch2OcrSpec>;
#[doc = "Значение сравнения 2 канала"]
pub mod ch2_ocr;
#[doc = "CH2_ICR (rw) register accessor: Значение захвата 2 канала\n\nYou can [`read`](crate::Reg::read) this register and get [`ch2_icr::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`ch2_icr::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ch2_icr`] module"]
#[doc(alias = "CH2_ICR")]
pub type Ch2Icr = crate::Reg<ch2_icr::Ch2IcrSpec>;
#[doc = "Значение захвата 2 канала"]
pub mod ch2_icr;
#[doc = "CH3_CNTR (rw) register accessor: Конфигурационный регистр 3 канала\n\nYou can [`read`](crate::Reg::read) this register and get [`ch3_cntr::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`ch3_cntr::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ch3_cntr`] module"]
#[doc(alias = "CH3_CNTR")]
pub type Ch3Cntr = crate::Reg<ch3_cntr::Ch3CntrSpec>;
#[doc = "Конфигурационный регистр 3 канала"]
pub mod ch3_cntr;
#[doc = "CH3_OCR (rw) register accessor: Значение сравнения 3 канала\n\nYou can [`read`](crate::Reg::read) this register and get [`ch3_ocr::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`ch3_ocr::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ch3_ocr`] module"]
#[doc(alias = "CH3_OCR")]
pub type Ch3Ocr = crate::Reg<ch3_ocr::Ch3OcrSpec>;
#[doc = "Значение сравнения 3 канала"]
pub mod ch3_ocr;
#[doc = "CH3_ICR (rw) register accessor: Значение захвата 3 канала\n\nYou can [`read`](crate::Reg::read) this register and get [`ch3_icr::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`ch3_icr::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ch3_icr`] module"]
#[doc(alias = "CH3_ICR")]
pub type Ch3Icr = crate::Reg<ch3_icr::Ch3IcrSpec>;
#[doc = "Значение захвата 3 канала"]
pub mod ch3_icr;
#[doc = "CH4_CNTR (rw) register accessor: Конфигурационный регистр 4 канала\n\nYou can [`read`](crate::Reg::read) this register and get [`ch4_cntr::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`ch4_cntr::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ch4_cntr`] module"]
#[doc(alias = "CH4_CNTR")]
pub type Ch4Cntr = crate::Reg<ch4_cntr::Ch4CntrSpec>;
#[doc = "Конфигурационный регистр 4 канала"]
pub mod ch4_cntr;
#[doc = "CH4_OCR (rw) register accessor: Значение сравнения 4 канала\n\nYou can [`read`](crate::Reg::read) this register and get [`ch4_ocr::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`ch4_ocr::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ch4_ocr`] module"]
#[doc(alias = "CH4_OCR")]
pub type Ch4Ocr = crate::Reg<ch4_ocr::Ch4OcrSpec>;
#[doc = "Значение сравнения 4 канала"]
pub mod ch4_ocr;
#[doc = "CH4_ICR (rw) register accessor: Значение захвата 4 канала\n\nYou can [`read`](crate::Reg::read) this register and get [`ch4_icr::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`ch4_icr::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ch4_icr`] module"]
#[doc(alias = "CH4_ICR")]
pub type Ch4Icr = crate::Reg<ch4_icr::Ch4IcrSpec>;
#[doc = "Значение захвата 4 канала"]
pub mod ch4_icr;