metapac

multi-backend declarative package manager

metapac allows you to maintain a consistent set of packages across multiple machines. It also makes setting up a new system with your preferred packages from your preferred package managers much easier.

Obligatory XKCDs

Installation

Cargo

cargo install metapac

Arch User Repository

paru -S metapac

Declarative

metapac is also a declarative package manager, that means that you declare in .toml group files the packages you would like installed on your system and then run one of the metapac commands which read these group files and then operate on your system to do some function such as install packages in your group files that are not present on your system yet (metapac sync), or remove packages present on your system but not in your group files (metapac clean).

The group files are then stored with your other system configuration files and so can be tracked with version control.

Usage

Enable backends

By default all backends are disabled. Enable the backends you want metapac to manage by adding them to the enabled_backends config in metapac's config file. See the Config section for more details.

Migrating a default system into `metapac`

Run metapac unmanaged and save the output into a group file in metapac's groups/ folder, see the Group Files section for the exact location of this folder on your operating system.

For example, on linux this would mean:

mkdir -p ~/.config/metapac/groups
metapac unmanaged > ~/.config/metapac/groups/all.toml

Now metapac won't try to remove any of your explicitly installed packages when you run metapac clean.

[!CAUTION] If you run metapac clean without first configuring your group files with the packages you want installed then metapac will attempt to remove all of your packages from your enabled_backends.

metapac clean will always show you which packages it intends to remove and ask for confirmation, so make sure to double check that the expected packages are being removed before confirming.

Adding a new package

Edit your group files with a text editor to add the package to an existing group file or create a new group file and add the package to it. See the Group Files section for the group file syntax
Run the metapac add command, see metapac add --help for arguments
Run the metapac install command, see metapac install --help for arguments

After the first two options you will then need to run metapac sync for the newly added package to be installed, whereas for metapac install it also installs the package while adding it to a group file.

[!TIP] The first option is recommended since then you can group or organize the order of packages in your group files in a way that is meaningful to you and even add comments using the toml format.

Removing a package

Do the opposite of Adding a new package. The opposite of metapac add is metapac remove, the opposite of metapac install is metapac uninstall and the opposite of metapac sync is metapac clean.

Hooks

There are two hooks that allow you to run a custom command before and after metapac installs your package: before_install and after_install. These hooks are configured on a per-package basis. One use-case for arch packages is to enable a package's systemd service after it is installed. This means you can declaratively maintain your enabled systemd services. See the Group Files section for some examples.

[!WARNING] A package's hooks are only run when the package is installed by metapac. If a package is already installed then running metapac sync will not run the hooks since it will not have to install the package. You can uninstall the package and then re-install it using metapac sync ensure the hooks are run.

Advanced usage

For more advanced usage read through the remaining sections, especially the Config section. You can also run metapac --help to get a list of all of the available commands.

Supported Backends

At the moment, these are the supported backends. Pull requests and issues for additional backends are always welcome!

Backend	Notes
`arch`	see the `arch_package_manager` config
`apt`
`brew`
`bun`
`cargo`
`dnf`
`flatpak`
`npm`	if on linux you might need to first run `npm config set prefix ~/.local`
`pipx`
`pnpm`	you might need to first run `pnpm setup`
`scoop`	doesn't differentiate between implicit and explicit packages, you will need to list all packages and their dependencies in your group files (see https://github.com/ScoopInstaller/Scoop/issues/4276)
`snap`
`uv`
`vscode`	see the `vscode_variant` config
`winget`
`xbps`
`yarn`

Config

# metapac's config.toml file (like this one) should be placed in the following location
# dependent on the operating system as specified in the `dirs` crate:
# | Platform | Value                                                 | Example                                                      |
# | -------- | ----------------------------------------------------- | ------------------------------------------------------------ |
# | Linux    | $XDG_CONFIG_HOME or $HOME/.config/metapac/config.toml | /home/alice/.config/metapac/config.toml                      |
# | macOS    | $HOME/Library/Application Support/metapac/config.toml | /Users/Alice/Library/Application Support/metapac/config.toml |
# | Windows  | {FOLDERID_RoamingAppData}\metapac\config.toml         | C:\Users\Alice\AppData\Roaming\metapac\config.toml           |

# Backends to enable for most of metapac's behavior. See the README.md or
# run `metapac backends` for the list of backend names
# Default: []
enabled_backends = ["arch"]

# Whether to use the [hostname_groups] config table to decide which
# group files to use or to use all files in the groups folder.
# Default: false
hostname_groups_enabled = true

# Which group files apply for which hostnames
# paths starting without a / are relative to the groups folder
# Default: None
[hostname_groups]
pc = ["example_group"]
laptop = ["example_group"]
server = ["example_group"]

[arch]
# Since pacman, pamac, paru, pikaur and yay all operate on the same package database
# they are mutually exclusive and so you must pick which one you want
# metapac to use.
# Must be one of: ["pacman", "pamac", "paru", "pikaur", "yay"]
# Default: "pacman"
package_manager = "paru"

[cargo]
# Whether to default to installing cargo packages with the --locked option.
# Default: false
locked = true

[flatpak]
# Whether to default to installing flatpak packages systemwide or for the
# current user. This setting can be overridden on a per-package basis.
# Default: true
systemwide = true

[vscode]
# Since VSCode and VSCodium both operate on the same package database
# they are mutually exclusive and so you must pick which one you want
# metapac to use.
# Must be one of: ["code", "codium"]
# Default: "code"
variant = "code"

Group Files

# metapac's group files (like this one) should be placed in the following location
# dependent on the operating system as specified in the `dirs` crate:
# | Platform | Value                                     | Example                                                  |
# | -------- | ----------------------------------------- | -------------------------------------------------------- |
# | Linux    | $XDG_CONFIG_HOME or $HOME/.config/groups/ | /home/alice/.config/metapac/groups/                      |
# | macOS    | $HOME/Library/Application Support/groups/ | /Users/Alice/Library/Application Support/metapac/groups/ |
# | Windows  | {FOLDERID_RoamingAppData}\groups\         | C:\Users\Alice\AppData\Roaming\metapac\groups\           |
#
# The packages for each backend in group files can come in two formats, short-form
# and long-form:
#
# short-form syntax is simply a string of the name of the package.
#
# long-form syntax is a table which contains several fields which can
# optionally be set to specify install options on a per-package basis.
# The "package" field in the table specifies the name of the package.
#
# For example, the following two packages are equivalent:
# arch = [
#  "metapac",
#  { package = "metapac" }
# ]

arch = [
 "metapac",
 { package = "metapac" },
 { package = "syncthing", hooks = { after_install = [
    "sudo",
    "systemctl",
    "enable",
    "--now",
    "syncthing@ripytide",
 ] } },
 { package = "openssh", hooks = { after_install = [
    "sudo",
    "systemctl",
    "enable",
    "--now",
    "sshd",
 ] } },
]
apt = [
 "metapac",
 { package = "metapac" }
]
brew = [
 "metapac",
 { package = "metapac" }
]
bun = [
 "metapac",
 { package = "metapac" }
]
cargo = [
 "metapac",
 # see cargo docs for info on the options
 { package = "metapac", options = { git = "https://github.com/ripytide/metapac", all_features = true, no_default_features = false, features = [ "feature1", ], locked = true } },
]
dnf = [
 "metapac",
 # see dnf docs for more info on these options
 { package = "metapac", options = { repo = "/etc/yum.repos.d/fedora_extras.repo" } },
]
flatpak = [
 "metapac",
 { package = "metapac", options = { remote = "flathub", systemwide = false } },
]
npm = [
 "metapac",
 { package = "metapac" }
]
pipx = [
 "metapac",
 { package = "metapac" },
]
pnpm = [
 "metapac",
 { package = "metapac" },
]
scoop = [
 "main/metapac",
 { package = "main/metapac" },
]
snap = [
 "metapac",
 { package = "metapac" },
 # see https://snapcraft.io/docs/snap-confinement for more info on confinement
 { package = "metapac", options = { confinement = "strict" } },
 { package = "metapac", options = { confinement = "classic" } },
 { package = "metapac", options = { confinement = "dangerous" } },
 { package = "metapac", options = { confinement = "devmode" } },
 { package = "metapac", options = { confinement = "jailmode" } },
]
uv = [
 "metapac",
 { package = "metapac" },
]
vscode = [
 "metapac",
 { package = "metapac" },
]
winget = [
 "ripytide.metapac",
 { package = "ripytide.metapac" },
]
xbps = [
 "metapac",
 { package = "metapac" },
]
yarn = [
 "metapac",
 { package = "metapac" },
]

Wishlist

Here is a list of package managers we would like to support along with any reasons why we can't yet if any. Feel free to add to this list if you know of any other package managers we should be aware of.

cgwin: no attempt made yet
choco: no attempt made yet
deno: can't list installed global packages https://github.com/denoland/deno/discussions/28230
guix: no attempt made yet
nix: no attempt made yet
pip: we support pipx instead which only allows you to install cli programs which makes sense for a global package manager
pkg: no attempt made yet
ports: no attempt made yet
pkgsrc: no attempt made yet
sdk: can't list installed packages https://github.com/sdkman/sdkman-cli/issues/466. The project is being rewritten in rust with the intention to implement the command in the new version https://github.com/sdkman/sdkman-cli-native, also see https://github.com/ripytide/metapac/issues/86
yum: project deprecated in favor of dnf

Similar Projects

decman: written in python, archlinux specific, supports installing dotfiles
declaro: written in shell script, currently provides support for apt, dnf, pacman, paru and yay but is extensible
pacdef: written in rust, custom file format, unmaintained, supported pacman, apt, dnf, flatpak, pip, cargo, rustup and xbps

Credits

This project was forked from https://github.com/steven-omaha/pacdef so credits to the author(s) of that project for all their prior work.

metapac 0.5.0

metapac

Obligatory XKCDs

Installation

Cargo

Arch User Repository

Meta

Declarative

Usage

Enable backends

Migrating a default system into `metapac`

Adding a new package

Removing a package

Hooks

Advanced usage

Supported Backends

Config

Group Files

Wishlist

Similar Projects

Credits

metapac 0.5.0

metapac

Obligatory XKCDs

Installation

Cargo

Arch User Repository

Meta

Declarative

Usage

Enable backends

Migrating a default system into metapac

Adding a new package

Removing a package

Hooks

Advanced usage

Supported Backends

Config

Group Files

Wishlist

Similar Projects

Credits

Migrating a default system into `metapac`