#[doc = "Register `LPUART3` reader"]
pub type R = crate::R<Lpuart3Spec>;
#[doc = "Register `LPUART3` writer"]
pub type W = crate::W<Lpuart3Spec>;
#[doc = "LPUART3 trigger input connections\n\nValue on reset: 63"]
#[cfg_attr(feature = "defmt", derive(defmt::Format))]
#[derive(Clone, Copy, Debug, PartialEq, Eq)]
#[repr(u8)]
pub enum Inp {
#[doc = "2: AOI0_OUT0 input is selected"]
Val2 = 2,
#[doc = "3: AOI0_OUT1 input is selected"]
Val3 = 3,
#[doc = "4: AOI0_OUT2 input is selected"]
Val4 = 4,
#[doc = "5: AOI0_OUT3 input is selected"]
Val5 = 5,
#[doc = "6: CMP0_OUT input is selected"]
Val6 = 6,
#[doc = "7: CMP1_OUT input is selected"]
Val7 = 7,
#[doc = "8: CMP2_OUT input is selected"]
Val8 = 8,
#[doc = "9: CTimer0_MAT2 input is selected"]
Val9 = 9,
#[doc = "10: CTimer0_MAT3 input is selected"]
Val10 = 10,
#[doc = "11: CTimer1_MAT2 input is selected"]
Val11 = 11,
#[doc = "12: CTimer1_MAT3 input is selected"]
Val12 = 12,
#[doc = "13: CTimer2_MAT2 input is selected"]
Val13 = 13,
#[doc = "14: CTimer2_MAT3 input is selected"]
Val14 = 14,
#[doc = "15: LPTMR0 input is selected"]
Val15 = 15,
#[doc = "17: TRIG_IN0 input is selected"]
Val17 = 17,
#[doc = "18: TRIG_IN1 input is selected"]
Val18 = 18,
#[doc = "19: TRIG_IN2 input is selected"]
Val19 = 19,
#[doc = "20: TRIG_IN3 input is selected"]
Val20 = 20,
#[doc = "21: TRIG_IN4 input is selected"]
Val21 = 21,
#[doc = "22: TRIG_IN5 input is selected"]
Val22 = 22,
#[doc = "23: TRIG_IN6 input is selected"]
Val23 = 23,
#[doc = "24: TRIG_IN7 input is selected"]
Val24 = 24,
#[doc = "25: TRIG_IN8 input is selected"]
Val25 = 25,
#[doc = "26: TRIG_IN9 input is selected"]
Val26 = 26,
#[doc = "27: TRIG_IN10 input is selected"]
Val27 = 27,
#[doc = "28: TRIG_IN11 input is selected"]
Val28 = 28,
#[doc = "29: GPIO0 Pin Event Trig 0 input is selected"]
Val29 = 29,
#[doc = "30: GPIO1 Pin Event Trig 0 input is selected"]
Val30 = 30,
#[doc = "31: GPIO2 Pin Event Trig 0 input is selected"]
Val31 = 31,
#[doc = "32: GPIO3 Pin Event Trig 0 input is selected"]
Val32 = 32,
#[doc = "33: GPIO4 Pin Event Trig 0 input is selected"]
Val33 = 33,
#[doc = "34: WUU selected"]
Val34 = 34,
#[doc = "35: USB0 ipp_ind_uart_rxd_usbmux input is selected"]
Val35 = 35,
#[doc = "36: AOI1_OUT0 input is selected"]
Val36 = 36,
#[doc = "37: AOI1_OUT1 input is selected"]
Val37 = 37,
#[doc = "38: AOI1_OUT2 input is selected"]
Val38 = 38,
#[doc = "39: AOI1_OUT3 input is selected"]
Val39 = 39,
#[doc = "40: CTimer3_MAT2 input is selected"]
Val40 = 40,
#[doc = "41: CTimer3_MAT3 input is selected"]
Val41 = 41,
#[doc = "42: CTimer4_MAT2 input is selected"]
Val42 = 42,
#[doc = "43: CTimer4_MAT3 input is selected"]
Val43 = 43,
#[doc = "44: FlexIO CH0 input is selected"]
Val44 = 44,
#[doc = "45: FlexIO CH1 input is selected"]
Val45 = 45,
#[doc = "46: FlexIO CH2 input is selected"]
Val46 = 46,
#[doc = "47: FlexIO CH3 input is selected"]
Val47 = 47,
}
impl From<Inp> for u8 {
#[inline(always)]
fn from(variant: Inp) -> Self {
variant as _
}
}
impl crate::FieldSpec for Inp {
type Ux = u8;
}
impl crate::IsEnum for Inp {}
#[doc = "Field `INP` reader - LPUART3 trigger input connections"]
pub type InpR = crate::FieldReader<Inp>;
impl InpR {
#[doc = "Get enumerated values variant"]
#[inline(always)]
pub const fn variant(&self) -> Option<Inp> {
match self.bits {
2 => Some(Inp::Val2),
3 => Some(Inp::Val3),
4 => Some(Inp::Val4),
5 => Some(Inp::Val5),
6 => Some(Inp::Val6),
7 => Some(Inp::Val7),
8 => Some(Inp::Val8),
9 => Some(Inp::Val9),
10 => Some(Inp::Val10),
11 => Some(Inp::Val11),
12 => Some(Inp::Val12),
13 => Some(Inp::Val13),
14 => Some(Inp::Val14),
15 => Some(Inp::Val15),
17 => Some(Inp::Val17),
18 => Some(Inp::Val18),
19 => Some(Inp::Val19),
20 => Some(Inp::Val20),
21 => Some(Inp::Val21),
22 => Some(Inp::Val22),
23 => Some(Inp::Val23),
24 => Some(Inp::Val24),
25 => Some(Inp::Val25),
26 => Some(Inp::Val26),
27 => Some(Inp::Val27),
28 => Some(Inp::Val28),
29 => Some(Inp::Val29),
30 => Some(Inp::Val30),
31 => Some(Inp::Val31),
32 => Some(Inp::Val32),
33 => Some(Inp::Val33),
34 => Some(Inp::Val34),
35 => Some(Inp::Val35),
36 => Some(Inp::Val36),
37 => Some(Inp::Val37),
38 => Some(Inp::Val38),
39 => Some(Inp::Val39),
40 => Some(Inp::Val40),
41 => Some(Inp::Val41),
42 => Some(Inp::Val42),
43 => Some(Inp::Val43),
44 => Some(Inp::Val44),
45 => Some(Inp::Val45),
46 => Some(Inp::Val46),
47 => Some(Inp::Val47),
_ => None,
}
}
#[doc = "AOI0_OUT0 input is selected"]
#[inline(always)]
pub fn is_val2(&self) -> bool {
*self == Inp::Val2
}
#[doc = "AOI0_OUT1 input is selected"]
#[inline(always)]
pub fn is_val3(&self) -> bool {
*self == Inp::Val3
}
#[doc = "AOI0_OUT2 input is selected"]
#[inline(always)]
pub fn is_val4(&self) -> bool {
*self == Inp::Val4
}
#[doc = "AOI0_OUT3 input is selected"]
#[inline(always)]
pub fn is_val5(&self) -> bool {
*self == Inp::Val5
}
#[doc = "CMP0_OUT input is selected"]
#[inline(always)]
pub fn is_val6(&self) -> bool {
*self == Inp::Val6
}
#[doc = "CMP1_OUT input is selected"]
#[inline(always)]
pub fn is_val7(&self) -> bool {
*self == Inp::Val7
}
#[doc = "CMP2_OUT input is selected"]
#[inline(always)]
pub fn is_val8(&self) -> bool {
*self == Inp::Val8
}
#[doc = "CTimer0_MAT2 input is selected"]
#[inline(always)]
pub fn is_val9(&self) -> bool {
*self == Inp::Val9
}
#[doc = "CTimer0_MAT3 input is selected"]
#[inline(always)]
pub fn is_val10(&self) -> bool {
*self == Inp::Val10
}
#[doc = "CTimer1_MAT2 input is selected"]
#[inline(always)]
pub fn is_val11(&self) -> bool {
*self == Inp::Val11
}
#[doc = "CTimer1_MAT3 input is selected"]
#[inline(always)]
pub fn is_val12(&self) -> bool {
*self == Inp::Val12
}
#[doc = "CTimer2_MAT2 input is selected"]
#[inline(always)]
pub fn is_val13(&self) -> bool {
*self == Inp::Val13
}
#[doc = "CTimer2_MAT3 input is selected"]
#[inline(always)]
pub fn is_val14(&self) -> bool {
*self == Inp::Val14
}
#[doc = "LPTMR0 input is selected"]
#[inline(always)]
pub fn is_val15(&self) -> bool {
*self == Inp::Val15
}
#[doc = "TRIG_IN0 input is selected"]
#[inline(always)]
pub fn is_val17(&self) -> bool {
*self == Inp::Val17
}
#[doc = "TRIG_IN1 input is selected"]
#[inline(always)]
pub fn is_val18(&self) -> bool {
*self == Inp::Val18
}
#[doc = "TRIG_IN2 input is selected"]
#[inline(always)]
pub fn is_val19(&self) -> bool {
*self == Inp::Val19
}
#[doc = "TRIG_IN3 input is selected"]
#[inline(always)]
pub fn is_val20(&self) -> bool {
*self == Inp::Val20
}
#[doc = "TRIG_IN4 input is selected"]
#[inline(always)]
pub fn is_val21(&self) -> bool {
*self == Inp::Val21
}
#[doc = "TRIG_IN5 input is selected"]
#[inline(always)]
pub fn is_val22(&self) -> bool {
*self == Inp::Val22
}
#[doc = "TRIG_IN6 input is selected"]
#[inline(always)]
pub fn is_val23(&self) -> bool {
*self == Inp::Val23
}
#[doc = "TRIG_IN7 input is selected"]
#[inline(always)]
pub fn is_val24(&self) -> bool {
*self == Inp::Val24
}
#[doc = "TRIG_IN8 input is selected"]
#[inline(always)]
pub fn is_val25(&self) -> bool {
*self == Inp::Val25
}
#[doc = "TRIG_IN9 input is selected"]
#[inline(always)]
pub fn is_val26(&self) -> bool {
*self == Inp::Val26
}
#[doc = "TRIG_IN10 input is selected"]
#[inline(always)]
pub fn is_val27(&self) -> bool {
*self == Inp::Val27
}
#[doc = "TRIG_IN11 input is selected"]
#[inline(always)]
pub fn is_val28(&self) -> bool {
*self == Inp::Val28
}
#[doc = "GPIO0 Pin Event Trig 0 input is selected"]
#[inline(always)]
pub fn is_val29(&self) -> bool {
*self == Inp::Val29
}
#[doc = "GPIO1 Pin Event Trig 0 input is selected"]
#[inline(always)]
pub fn is_val30(&self) -> bool {
*self == Inp::Val30
}
#[doc = "GPIO2 Pin Event Trig 0 input is selected"]
#[inline(always)]
pub fn is_val31(&self) -> bool {
*self == Inp::Val31
}
#[doc = "GPIO3 Pin Event Trig 0 input is selected"]
#[inline(always)]
pub fn is_val32(&self) -> bool {
*self == Inp::Val32
}
#[doc = "GPIO4 Pin Event Trig 0 input is selected"]
#[inline(always)]
pub fn is_val33(&self) -> bool {
*self == Inp::Val33
}
#[doc = "WUU selected"]
#[inline(always)]
pub fn is_val34(&self) -> bool {
*self == Inp::Val34
}
#[doc = "USB0 ipp_ind_uart_rxd_usbmux input is selected"]
#[inline(always)]
pub fn is_val35(&self) -> bool {
*self == Inp::Val35
}
#[doc = "AOI1_OUT0 input is selected"]
#[inline(always)]
pub fn is_val36(&self) -> bool {
*self == Inp::Val36
}
#[doc = "AOI1_OUT1 input is selected"]
#[inline(always)]
pub fn is_val37(&self) -> bool {
*self == Inp::Val37
}
#[doc = "AOI1_OUT2 input is selected"]
#[inline(always)]
pub fn is_val38(&self) -> bool {
*self == Inp::Val38
}
#[doc = "AOI1_OUT3 input is selected"]
#[inline(always)]
pub fn is_val39(&self) -> bool {
*self == Inp::Val39
}
#[doc = "CTimer3_MAT2 input is selected"]
#[inline(always)]
pub fn is_val40(&self) -> bool {
*self == Inp::Val40
}
#[doc = "CTimer3_MAT3 input is selected"]
#[inline(always)]
pub fn is_val41(&self) -> bool {
*self == Inp::Val41
}
#[doc = "CTimer4_MAT2 input is selected"]
#[inline(always)]
pub fn is_val42(&self) -> bool {
*self == Inp::Val42
}
#[doc = "CTimer4_MAT3 input is selected"]
#[inline(always)]
pub fn is_val43(&self) -> bool {
*self == Inp::Val43
}
#[doc = "FlexIO CH0 input is selected"]
#[inline(always)]
pub fn is_val44(&self) -> bool {
*self == Inp::Val44
}
#[doc = "FlexIO CH1 input is selected"]
#[inline(always)]
pub fn is_val45(&self) -> bool {
*self == Inp::Val45
}
#[doc = "FlexIO CH2 input is selected"]
#[inline(always)]
pub fn is_val46(&self) -> bool {
*self == Inp::Val46
}
#[doc = "FlexIO CH3 input is selected"]
#[inline(always)]
pub fn is_val47(&self) -> bool {
*self == Inp::Val47
}
}
#[doc = "Field `INP` writer - LPUART3 trigger input connections"]
pub type InpW<'a, REG> = crate::FieldWriter<'a, REG, 6, Inp>;
impl<'a, REG> InpW<'a, REG>
where
REG: crate::Writable + crate::RegisterSpec,
REG::Ux: From<u8>,
{
#[doc = "AOI0_OUT0 input is selected"]
#[inline(always)]
pub fn val2(self) -> &'a mut crate::W<REG> {
self.variant(Inp::Val2)
}
#[doc = "AOI0_OUT1 input is selected"]
#[inline(always)]
pub fn val3(self) -> &'a mut crate::W<REG> {
self.variant(Inp::Val3)
}
#[doc = "AOI0_OUT2 input is selected"]
#[inline(always)]
pub fn val4(self) -> &'a mut crate::W<REG> {
self.variant(Inp::Val4)
}
#[doc = "AOI0_OUT3 input is selected"]
#[inline(always)]
pub fn val5(self) -> &'a mut crate::W<REG> {
self.variant(Inp::Val5)
}
#[doc = "CMP0_OUT input is selected"]
#[inline(always)]
pub fn val6(self) -> &'a mut crate::W<REG> {
self.variant(Inp::Val6)
}
#[doc = "CMP1_OUT input is selected"]
#[inline(always)]
pub fn val7(self) -> &'a mut crate::W<REG> {
self.variant(Inp::Val7)
}
#[doc = "CMP2_OUT input is selected"]
#[inline(always)]
pub fn val8(self) -> &'a mut crate::W<REG> {
self.variant(Inp::Val8)
}
#[doc = "CTimer0_MAT2 input is selected"]
#[inline(always)]
pub fn val9(self) -> &'a mut crate::W<REG> {
self.variant(Inp::Val9)
}
#[doc = "CTimer0_MAT3 input is selected"]
#[inline(always)]
pub fn val10(self) -> &'a mut crate::W<REG> {
self.variant(Inp::Val10)
}
#[doc = "CTimer1_MAT2 input is selected"]
#[inline(always)]
pub fn val11(self) -> &'a mut crate::W<REG> {
self.variant(Inp::Val11)
}
#[doc = "CTimer1_MAT3 input is selected"]
#[inline(always)]
pub fn val12(self) -> &'a mut crate::W<REG> {
self.variant(Inp::Val12)
}
#[doc = "CTimer2_MAT2 input is selected"]
#[inline(always)]
pub fn val13(self) -> &'a mut crate::W<REG> {
self.variant(Inp::Val13)
}
#[doc = "CTimer2_MAT3 input is selected"]
#[inline(always)]
pub fn val14(self) -> &'a mut crate::W<REG> {
self.variant(Inp::Val14)
}
#[doc = "LPTMR0 input is selected"]
#[inline(always)]
pub fn val15(self) -> &'a mut crate::W<REG> {
self.variant(Inp::Val15)
}
#[doc = "TRIG_IN0 input is selected"]
#[inline(always)]
pub fn val17(self) -> &'a mut crate::W<REG> {
self.variant(Inp::Val17)
}
#[doc = "TRIG_IN1 input is selected"]
#[inline(always)]
pub fn val18(self) -> &'a mut crate::W<REG> {
self.variant(Inp::Val18)
}
#[doc = "TRIG_IN2 input is selected"]
#[inline(always)]
pub fn val19(self) -> &'a mut crate::W<REG> {
self.variant(Inp::Val19)
}
#[doc = "TRIG_IN3 input is selected"]
#[inline(always)]
pub fn val20(self) -> &'a mut crate::W<REG> {
self.variant(Inp::Val20)
}
#[doc = "TRIG_IN4 input is selected"]
#[inline(always)]
pub fn val21(self) -> &'a mut crate::W<REG> {
self.variant(Inp::Val21)
}
#[doc = "TRIG_IN5 input is selected"]
#[inline(always)]
pub fn val22(self) -> &'a mut crate::W<REG> {
self.variant(Inp::Val22)
}
#[doc = "TRIG_IN6 input is selected"]
#[inline(always)]
pub fn val23(self) -> &'a mut crate::W<REG> {
self.variant(Inp::Val23)
}
#[doc = "TRIG_IN7 input is selected"]
#[inline(always)]
pub fn val24(self) -> &'a mut crate::W<REG> {
self.variant(Inp::Val24)
}
#[doc = "TRIG_IN8 input is selected"]
#[inline(always)]
pub fn val25(self) -> &'a mut crate::W<REG> {
self.variant(Inp::Val25)
}
#[doc = "TRIG_IN9 input is selected"]
#[inline(always)]
pub fn val26(self) -> &'a mut crate::W<REG> {
self.variant(Inp::Val26)
}
#[doc = "TRIG_IN10 input is selected"]
#[inline(always)]
pub fn val27(self) -> &'a mut crate::W<REG> {
self.variant(Inp::Val27)
}
#[doc = "TRIG_IN11 input is selected"]
#[inline(always)]
pub fn val28(self) -> &'a mut crate::W<REG> {
self.variant(Inp::Val28)
}
#[doc = "GPIO0 Pin Event Trig 0 input is selected"]
#[inline(always)]
pub fn val29(self) -> &'a mut crate::W<REG> {
self.variant(Inp::Val29)
}
#[doc = "GPIO1 Pin Event Trig 0 input is selected"]
#[inline(always)]
pub fn val30(self) -> &'a mut crate::W<REG> {
self.variant(Inp::Val30)
}
#[doc = "GPIO2 Pin Event Trig 0 input is selected"]
#[inline(always)]
pub fn val31(self) -> &'a mut crate::W<REG> {
self.variant(Inp::Val31)
}
#[doc = "GPIO3 Pin Event Trig 0 input is selected"]
#[inline(always)]
pub fn val32(self) -> &'a mut crate::W<REG> {
self.variant(Inp::Val32)
}
#[doc = "GPIO4 Pin Event Trig 0 input is selected"]
#[inline(always)]
pub fn val33(self) -> &'a mut crate::W<REG> {
self.variant(Inp::Val33)
}
#[doc = "WUU selected"]
#[inline(always)]
pub fn val34(self) -> &'a mut crate::W<REG> {
self.variant(Inp::Val34)
}
#[doc = "USB0 ipp_ind_uart_rxd_usbmux input is selected"]
#[inline(always)]
pub fn val35(self) -> &'a mut crate::W<REG> {
self.variant(Inp::Val35)
}
#[doc = "AOI1_OUT0 input is selected"]
#[inline(always)]
pub fn val36(self) -> &'a mut crate::W<REG> {
self.variant(Inp::Val36)
}
#[doc = "AOI1_OUT1 input is selected"]
#[inline(always)]
pub fn val37(self) -> &'a mut crate::W<REG> {
self.variant(Inp::Val37)
}
#[doc = "AOI1_OUT2 input is selected"]
#[inline(always)]
pub fn val38(self) -> &'a mut crate::W<REG> {
self.variant(Inp::Val38)
}
#[doc = "AOI1_OUT3 input is selected"]
#[inline(always)]
pub fn val39(self) -> &'a mut crate::W<REG> {
self.variant(Inp::Val39)
}
#[doc = "CTimer3_MAT2 input is selected"]
#[inline(always)]
pub fn val40(self) -> &'a mut crate::W<REG> {
self.variant(Inp::Val40)
}
#[doc = "CTimer3_MAT3 input is selected"]
#[inline(always)]
pub fn val41(self) -> &'a mut crate::W<REG> {
self.variant(Inp::Val41)
}
#[doc = "CTimer4_MAT2 input is selected"]
#[inline(always)]
pub fn val42(self) -> &'a mut crate::W<REG> {
self.variant(Inp::Val42)
}
#[doc = "CTimer4_MAT3 input is selected"]
#[inline(always)]
pub fn val43(self) -> &'a mut crate::W<REG> {
self.variant(Inp::Val43)
}
#[doc = "FlexIO CH0 input is selected"]
#[inline(always)]
pub fn val44(self) -> &'a mut crate::W<REG> {
self.variant(Inp::Val44)
}
#[doc = "FlexIO CH1 input is selected"]
#[inline(always)]
pub fn val45(self) -> &'a mut crate::W<REG> {
self.variant(Inp::Val45)
}
#[doc = "FlexIO CH2 input is selected"]
#[inline(always)]
pub fn val46(self) -> &'a mut crate::W<REG> {
self.variant(Inp::Val46)
}
#[doc = "FlexIO CH3 input is selected"]
#[inline(always)]
pub fn val47(self) -> &'a mut crate::W<REG> {
self.variant(Inp::Val47)
}
}
impl R {
#[doc = "Bits 0:5 - LPUART3 trigger input connections"]
#[inline(always)]
pub fn inp(&self) -> InpR {
InpR::new((self.bits & 0x3f) as u8)
}
}
#[cfg(feature = "debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
f.debug_struct("LPUART3").field("inp", &self.inp()).finish()
}
}
impl W {
#[doc = "Bits 0:5 - LPUART3 trigger input connections"]
#[inline(always)]
pub fn inp(&mut self) -> InpW<'_, Lpuart3Spec> {
InpW::new(self, 0)
}
}
#[doc = "LPUART3 trigger input connections\n\nYou can [`read`](crate::Reg::read) this register and get [`lpuart3::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`lpuart3::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
pub struct Lpuart3Spec;
impl crate::RegisterSpec for Lpuart3Spec {
type Ux = u32;
}
#[doc = "`read()` method returns [`lpuart3::R`](R) reader structure"]
impl crate::Readable for Lpuart3Spec {}
#[doc = "`write(|w| ..)` method takes [`lpuart3::W`](W) writer structure"]
impl crate::Writable for Lpuart3Spec {
type Safety = crate::Unsafe;
}
#[doc = "`reset()` method sets LPUART3 to value 0x3f"]
impl crate::Resettable for Lpuart3Spec {
const RESET_VALUE: u32 = 0x3f;
}