#[doc = "Register `CONTROL` reader"]
pub type R = crate::R<ControlSpec>;
#[doc = "Register `CONTROL` writer"]
pub type W = crate::W<ControlSpec>;
#[doc = "VBUS Monitoring Source Select\n\nValue on reset: 0"]
#[cfg_attr(feature = "defmt", derive(defmt::Format))]
#[derive(Clone, Copy, Debug, PartialEq, Eq)]
pub enum VbusSourceSel {
#[doc = "1: Resistive divider attached to a GPIO pin"]
Resistive = 1,
}
impl From<VbusSourceSel> for bool {
#[inline(always)]
fn from(variant: VbusSourceSel) -> Self {
variant as u8 != 0
}
}
#[doc = "Field `VBUS_SOURCE_SEL` reader - VBUS Monitoring Source Select"]
pub type VbusSourceSelR = crate::BitReader<VbusSourceSel>;
impl VbusSourceSelR {
#[doc = "Get enumerated values variant"]
#[inline(always)]
pub const fn variant(&self) -> Option<VbusSourceSel> {
match self.bits {
true => Some(VbusSourceSel::Resistive),
_ => None,
}
}
#[doc = "Resistive divider attached to a GPIO pin"]
#[inline(always)]
pub fn is_resistive(&self) -> bool {
*self == VbusSourceSel::Resistive
}
}
#[doc = "Field `VBUS_SOURCE_SEL` writer - VBUS Monitoring Source Select"]
pub type VbusSourceSelW<'a, REG> = crate::BitWriter<'a, REG, VbusSourceSel>;
impl<'a, REG> VbusSourceSelW<'a, REG>
where
REG: crate::Writable + crate::RegisterSpec,
{
#[doc = "Resistive divider attached to a GPIO pin"]
#[inline(always)]
pub fn resistive(self) -> &'a mut crate::W<REG> {
self.variant(VbusSourceSel::Resistive)
}
}
#[doc = "VBUS Session Valid status\n\nValue on reset: 0"]
#[cfg_attr(feature = "defmt", derive(defmt::Format))]
#[derive(Clone, Copy, Debug, PartialEq, Eq)]
pub enum SessVld {
#[doc = "0: Below"]
SessVldLow = 0,
#[doc = "1: Above"]
SessVldHigh = 1,
}
impl From<SessVld> for bool {
#[inline(always)]
fn from(variant: SessVld) -> Self {
variant as u8 != 0
}
}
#[doc = "Field `SESS_VLD` reader - VBUS Session Valid status"]
pub type SessVldR = crate::BitReader<SessVld>;
impl SessVldR {
#[doc = "Get enumerated values variant"]
#[inline(always)]
pub const fn variant(&self) -> SessVld {
match self.bits {
false => SessVld::SessVldLow,
true => SessVld::SessVldHigh,
}
}
#[doc = "Below"]
#[inline(always)]
pub fn is_sess_vld_low(&self) -> bool {
*self == SessVld::SessVldLow
}
#[doc = "Above"]
#[inline(always)]
pub fn is_sess_vld_high(&self) -> bool {
*self == SessVld::SessVldHigh
}
}
#[doc = "DP Pullup in Non-OTG Device Mode\n\nValue on reset: 0"]
#[cfg_attr(feature = "defmt", derive(defmt::Format))]
#[derive(Clone, Copy, Debug, PartialEq, Eq)]
pub enum Dppullupnonotg {
#[doc = "0: Disable"]
DisDeviceDpPu = 0,
#[doc = "1: Enabled"]
EnDeviceDpPu = 1,
}
impl From<Dppullupnonotg> for bool {
#[inline(always)]
fn from(variant: Dppullupnonotg) -> Self {
variant as u8 != 0
}
}
#[doc = "Field `DPPULLUPNONOTG` reader - DP Pullup in Non-OTG Device Mode"]
pub type DppullupnonotgR = crate::BitReader<Dppullupnonotg>;
impl DppullupnonotgR {
#[doc = "Get enumerated values variant"]
#[inline(always)]
pub const fn variant(&self) -> Dppullupnonotg {
match self.bits {
false => Dppullupnonotg::DisDeviceDpPu,
true => Dppullupnonotg::EnDeviceDpPu,
}
}
#[doc = "Disable"]
#[inline(always)]
pub fn is_dis_device_dp_pu(&self) -> bool {
*self == Dppullupnonotg::DisDeviceDpPu
}
#[doc = "Enabled"]
#[inline(always)]
pub fn is_en_device_dp_pu(&self) -> bool {
*self == Dppullupnonotg::EnDeviceDpPu
}
}
#[doc = "Field `DPPULLUPNONOTG` writer - DP Pullup in Non-OTG Device Mode"]
pub type DppullupnonotgW<'a, REG> = crate::BitWriter<'a, REG, Dppullupnonotg>;
impl<'a, REG> DppullupnonotgW<'a, REG>
where
REG: crate::Writable + crate::RegisterSpec,
{
#[doc = "Disable"]
#[inline(always)]
pub fn dis_device_dp_pu(self) -> &'a mut crate::W<REG> {
self.variant(Dppullupnonotg::DisDeviceDpPu)
}
#[doc = "Enabled"]
#[inline(always)]
pub fn en_device_dp_pu(self) -> &'a mut crate::W<REG> {
self.variant(Dppullupnonotg::EnDeviceDpPu)
}
}
impl R {
#[doc = "Bit 0 - VBUS Monitoring Source Select"]
#[inline(always)]
pub fn vbus_source_sel(&self) -> VbusSourceSelR {
VbusSourceSelR::new((self.bits & 1) != 0)
}
#[doc = "Bit 1 - VBUS Session Valid status"]
#[inline(always)]
pub fn sess_vld(&self) -> SessVldR {
SessVldR::new(((self.bits >> 1) & 1) != 0)
}
#[doc = "Bit 4 - DP Pullup in Non-OTG Device Mode"]
#[inline(always)]
pub fn dppullupnonotg(&self) -> DppullupnonotgR {
DppullupnonotgR::new(((self.bits >> 4) & 1) != 0)
}
}
#[cfg(feature = "debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
f.debug_struct("CONTROL")
.field("vbus_source_sel", &self.vbus_source_sel())
.field("sess_vld", &self.sess_vld())
.field("dppullupnonotg", &self.dppullupnonotg())
.finish()
}
}
impl W {
#[doc = "Bit 0 - VBUS Monitoring Source Select"]
#[inline(always)]
pub fn vbus_source_sel(&mut self) -> VbusSourceSelW<'_, ControlSpec> {
VbusSourceSelW::new(self, 0)
}
#[doc = "Bit 4 - DP Pullup in Non-OTG Device Mode"]
#[inline(always)]
pub fn dppullupnonotg(&mut self) -> DppullupnonotgW<'_, ControlSpec> {
DppullupnonotgW::new(self, 4)
}
}
#[doc = "USB OTG Control\n\nYou can [`read`](crate::Reg::read) this register and get [`control::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`control::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
pub struct ControlSpec;
impl crate::RegisterSpec for ControlSpec {
type Ux = u8;
}
#[doc = "`read()` method returns [`control::R`](R) reader structure"]
impl crate::Readable for ControlSpec {}
#[doc = "`write(|w| ..)` method takes [`control::W`](W) writer structure"]
impl crate::Writable for ControlSpec {
type Safety = crate::Unsafe;
}
#[doc = "`reset()` method sets CONTROL to value 0"]
impl crate::Resettable for ControlSpec {}