max3263x 0.5.0

svd2rust generated peripheral crate for the max3263x
Documentation 
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152

#[doc = r"Register block"]
#[repr(C)]
pub struct RegisterBlock {
    #[doc = "0x00 - USB Control Register"]
    pub cn: crate::Reg<cn::CN_SPEC>,
    _reserved1: [u8; 0x01fc],
    #[doc = "0x200 - USB Device Address Register"]
    pub dev_addr: crate::Reg<dev_addr::DEV_ADDR_SPEC>,
    #[doc = "0x204 - USB Device Control Register"]
    pub dev_cn: crate::Reg<dev_cn::DEV_CN_SPEC>,
    #[doc = "0x208 - USB Device Interrupt"]
    pub dev_intfl: crate::Reg<dev_intfl::DEV_INTFL_SPEC>,
    #[doc = "0x20c - USB Device Interrupt Enable"]
    pub dev_inten: crate::Reg<dev_inten::DEV_INTEN_SPEC>,
    _reserved5: [u8; 0x10],
    #[doc = "0x220 - USB Endpoint Descriptor Table Base Address"]
    pub ep_base: crate::Reg<ep_base::EP_BASE_SPEC>,
    #[doc = "0x224 - USB Current Endpoint Buffer Register"]
    pub cur_buf: crate::Reg<cur_buf::CUR_BUF_SPEC>,
    #[doc = "0x228 - USB IN Endpoint Buffer Owner Register"]
    pub in_owner: crate::Reg<in_owner::IN_OWNER_SPEC>,
    #[doc = "0x22c - USB OUT Endpoint Buffer Owner Register"]
    pub out_owner: crate::Reg<out_owner::OUT_OWNER_SPEC>,
    #[doc = "0x230 - USB IN Endpoint Buffer Available Interrupt"]
    pub in_int: crate::Reg<in_int::IN_INT_SPEC>,
    #[doc = "0x234 - USB OUT Endpoint Data Available Interrupt"]
    pub out_int: crate::Reg<out_int::OUT_INT_SPEC>,
    #[doc = "0x238 - USB IN Endpoint NAK Interrupt"]
    pub nak_int: crate::Reg<nak_int::NAK_INT_SPEC>,
    #[doc = "0x23c - USB DMA Error Interrupt"]
    pub dma_err_int: crate::Reg<dma_err_int::DMA_ERR_INT_SPEC>,
    #[doc = "0x240 - USB Buffer Overflow Interrupt"]
    pub buf_ovr_int: crate::Reg<buf_ovr_int::BUF_OVR_INT_SPEC>,
    _reserved14: [u8; 0x1c],
    #[doc = "0x260 - USB SETUP Packet Bytes 0 to 3"]
    pub setup0: crate::Reg<setup0::SETUP0_SPEC>,
    #[doc = "0x264 - USB SETUP Packet Bytes 4 to 7"]
    pub setup1: crate::Reg<setup1::SETUP1_SPEC>,
    _reserved16: [u8; 0x18],
    #[doc = "0x280 - USB Endpoint 0 Control Register"]
    pub ep0: crate::Reg<ep0::EP0_SPEC>,
    #[doc = "0x284 - USB Endpoint 1 Control Register"]
    pub ep1: crate::Reg<ep1::EP1_SPEC>,
    #[doc = "0x288 - USB Endpoint 2 Control Register"]
    pub ep2: crate::Reg<ep2::EP2_SPEC>,
    #[doc = "0x28c - USB Endpoint 3 Control Register"]
    pub ep3: crate::Reg<ep3::EP3_SPEC>,
    #[doc = "0x290 - USB Endpoint 4 Control Register"]
    pub ep4: crate::Reg<ep4::EP4_SPEC>,
    #[doc = "0x294 - USB Endpoint 5 Control Register"]
    pub ep5: crate::Reg<ep5::EP5_SPEC>,
    #[doc = "0x298 - USB Endpoint 6 Control Register"]
    pub ep6: crate::Reg<ep6::EP6_SPEC>,
    #[doc = "0x29c - USB Endpoint 7 Control Register"]
    pub ep7: crate::Reg<ep7::EP7_SPEC>,
}
#[doc = "CN register accessor: an alias for `Reg<CN_SPEC>`"]
pub type CN = crate::Reg<cn::CN_SPEC>;
#[doc = "USB Control Register"]
pub mod cn;
#[doc = "DEV_ADDR register accessor: an alias for `Reg<DEV_ADDR_SPEC>`"]
pub type DEV_ADDR = crate::Reg<dev_addr::DEV_ADDR_SPEC>;
#[doc = "USB Device Address Register"]
pub mod dev_addr;
#[doc = "DEV_CN register accessor: an alias for `Reg<DEV_CN_SPEC>`"]
pub type DEV_CN = crate::Reg<dev_cn::DEV_CN_SPEC>;
#[doc = "USB Device Control Register"]
pub mod dev_cn;
#[doc = "DEV_INTFL register accessor: an alias for `Reg<DEV_INTFL_SPEC>`"]
pub type DEV_INTFL = crate::Reg<dev_intfl::DEV_INTFL_SPEC>;
#[doc = "USB Device Interrupt"]
pub mod dev_intfl;
#[doc = "DEV_INTEN register accessor: an alias for `Reg<DEV_INTEN_SPEC>`"]
pub type DEV_INTEN = crate::Reg<dev_inten::DEV_INTEN_SPEC>;
#[doc = "USB Device Interrupt Enable"]
pub mod dev_inten;
#[doc = "EP_BASE register accessor: an alias for `Reg<EP_BASE_SPEC>`"]
pub type EP_BASE = crate::Reg<ep_base::EP_BASE_SPEC>;
#[doc = "USB Endpoint Descriptor Table Base Address"]
pub mod ep_base;
#[doc = "CUR_BUF register accessor: an alias for `Reg<CUR_BUF_SPEC>`"]
pub type CUR_BUF = crate::Reg<cur_buf::CUR_BUF_SPEC>;
#[doc = "USB Current Endpoint Buffer Register"]
pub mod cur_buf;
#[doc = "IN_OWNER register accessor: an alias for `Reg<IN_OWNER_SPEC>`"]
pub type IN_OWNER = crate::Reg<in_owner::IN_OWNER_SPEC>;
#[doc = "USB IN Endpoint Buffer Owner Register"]
pub mod in_owner;
#[doc = "OUT_OWNER register accessor: an alias for `Reg<OUT_OWNER_SPEC>`"]
pub type OUT_OWNER = crate::Reg<out_owner::OUT_OWNER_SPEC>;
#[doc = "USB OUT Endpoint Buffer Owner Register"]
pub mod out_owner;
#[doc = "IN_INT register accessor: an alias for `Reg<IN_INT_SPEC>`"]
pub type IN_INT = crate::Reg<in_int::IN_INT_SPEC>;
#[doc = "USB IN Endpoint Buffer Available Interrupt"]
pub mod in_int;
#[doc = "OUT_INT register accessor: an alias for `Reg<OUT_INT_SPEC>`"]
pub type OUT_INT = crate::Reg<out_int::OUT_INT_SPEC>;
#[doc = "USB OUT Endpoint Data Available Interrupt"]
pub mod out_int;
#[doc = "NAK_INT register accessor: an alias for `Reg<NAK_INT_SPEC>`"]
pub type NAK_INT = crate::Reg<nak_int::NAK_INT_SPEC>;
#[doc = "USB IN Endpoint NAK Interrupt"]
pub mod nak_int;
#[doc = "DMA_ERR_INT register accessor: an alias for `Reg<DMA_ERR_INT_SPEC>`"]
pub type DMA_ERR_INT = crate::Reg<dma_err_int::DMA_ERR_INT_SPEC>;
#[doc = "USB DMA Error Interrupt"]
pub mod dma_err_int;
#[doc = "BUF_OVR_INT register accessor: an alias for `Reg<BUF_OVR_INT_SPEC>`"]
pub type BUF_OVR_INT = crate::Reg<buf_ovr_int::BUF_OVR_INT_SPEC>;
#[doc = "USB Buffer Overflow Interrupt"]
pub mod buf_ovr_int;
#[doc = "SETUP0 register accessor: an alias for `Reg<SETUP0_SPEC>`"]
pub type SETUP0 = crate::Reg<setup0::SETUP0_SPEC>;
#[doc = "USB SETUP Packet Bytes 0 to 3"]
pub mod setup0;
#[doc = "SETUP1 register accessor: an alias for `Reg<SETUP1_SPEC>`"]
pub type SETUP1 = crate::Reg<setup1::SETUP1_SPEC>;
#[doc = "USB SETUP Packet Bytes 4 to 7"]
pub mod setup1;
#[doc = "EP0 register accessor: an alias for `Reg<EP0_SPEC>`"]
pub type EP0 = crate::Reg<ep0::EP0_SPEC>;
#[doc = "USB Endpoint 0 Control Register"]
pub mod ep0;
#[doc = "EP1 register accessor: an alias for `Reg<EP1_SPEC>`"]
pub type EP1 = crate::Reg<ep1::EP1_SPEC>;
#[doc = "USB Endpoint 1 Control Register"]
pub mod ep1;
#[doc = "EP2 register accessor: an alias for `Reg<EP2_SPEC>`"]
pub type EP2 = crate::Reg<ep2::EP2_SPEC>;
#[doc = "USB Endpoint 2 Control Register"]
pub mod ep2;
#[doc = "EP3 register accessor: an alias for `Reg<EP3_SPEC>`"]
pub type EP3 = crate::Reg<ep3::EP3_SPEC>;
#[doc = "USB Endpoint 3 Control Register"]
pub mod ep3;
#[doc = "EP4 register accessor: an alias for `Reg<EP4_SPEC>`"]
pub type EP4 = crate::Reg<ep4::EP4_SPEC>;
#[doc = "USB Endpoint 4 Control Register"]
pub mod ep4;
#[doc = "EP5 register accessor: an alias for `Reg<EP5_SPEC>`"]
pub type EP5 = crate::Reg<ep5::EP5_SPEC>;
#[doc = "USB Endpoint 5 Control Register"]
pub mod ep5;
#[doc = "EP6 register accessor: an alias for `Reg<EP6_SPEC>`"]
pub type EP6 = crate::Reg<ep6::EP6_SPEC>;
#[doc = "USB Endpoint 6 Control Register"]
pub mod ep6;
#[doc = "EP7 register accessor: an alias for `Reg<EP7_SPEC>`"]
pub type EP7 = crate::Reg<ep7::EP7_SPEC>;
#[doc = "USB Endpoint 7 Control Register"]
pub mod ep7;