#[doc = "Register `INTVAL` reader"]
pub struct R(crate::R<INTVAL_SPEC>);
impl core::ops::Deref for R {
type Target = crate::R<INTVAL_SPEC>;
#[inline(always)]
fn deref(&self) -> &Self::Target {
&self.0
}
}
impl From<crate::R<INTVAL_SPEC>> for R {
#[inline(always)]
fn from(reader: crate::R<INTVAL_SPEC>) -> Self {
R(reader)
}
}
#[doc = "Register `INTVAL` writer"]
pub struct W(crate::W<INTVAL_SPEC>);
impl core::ops::Deref for W {
type Target = crate::W<INTVAL_SPEC>;
#[inline(always)]
fn deref(&self) -> &Self::Target {
&self.0
}
}
impl core::ops::DerefMut for W {
#[inline(always)]
fn deref_mut(&mut self) -> &mut Self::Target {
&mut self.0
}
}
impl From<crate::W<INTVAL_SPEC>> for W {
#[inline(always)]
fn from(writer: crate::W<INTVAL_SPEC>) -> Self {
W(writer)
}
}
#[doc = "Field `IVALUE` reader - Time interval load value. This value is loaded into the TIMERn register and the MRT channel n starts counting down from IVALUE -1. If the timer is idle, writing a non-zero value to this bit field starts the timer immediately. If the timer is running, writing a zero to this bit field does the following: If LOAD = 1, the timer stops immediately. If LOAD = 0, the timer stops at the end of the time interval."]
pub struct IVALUE_R(crate::FieldReader<u32, u32>);
impl IVALUE_R {
pub(crate) fn new(bits: u32) -> Self {
IVALUE_R(crate::FieldReader::new(bits))
}
}
impl core::ops::Deref for IVALUE_R {
type Target = crate::FieldReader<u32, u32>;
#[inline(always)]
fn deref(&self) -> &Self::Target {
&self.0
}
}
#[doc = "Field `IVALUE` writer - Time interval load value. This value is loaded into the TIMERn register and the MRT channel n starts counting down from IVALUE -1. If the timer is idle, writing a non-zero value to this bit field starts the timer immediately. If the timer is running, writing a zero to this bit field does the following: If LOAD = 1, the timer stops immediately. If LOAD = 0, the timer stops at the end of the time interval."]
pub struct IVALUE_W<'a> {
w: &'a mut W,
}
impl<'a> IVALUE_W<'a> {
#[doc = r"Writes raw bits to the field"]
#[inline(always)]
pub unsafe fn bits(self, value: u32) -> &'a mut W {
self.w.bits = (self.w.bits & !0x7fff_ffff) | (value as u32 & 0x7fff_ffff);
self.w
}
}
#[doc = "Determines how the timer interval value IVALUE -1 is loaded into the TIMERn register. This bit is write-only. Reading this bit always returns 0.\n\nValue on reset: 0"]
#[derive(Clone, Copy, Debug, PartialEq)]
pub enum LOAD_A {
#[doc = "0: No force load. The load from the INTVALn register to the TIMERn register is processed at the end of the time interval if the repeat mode is selected."]
NO_FORCE_LOAD = 0,
#[doc = "1: Force load. The INTVALn interval value IVALUE -1 is immediately loaded into the TIMERn register while TIMERn is running."]
FORCE_LOAD = 1,
}
impl From<LOAD_A> for bool {
#[inline(always)]
fn from(variant: LOAD_A) -> Self {
variant as u8 != 0
}
}
#[doc = "Field `LOAD` reader - Determines how the timer interval value IVALUE -1 is loaded into the TIMERn register. This bit is write-only. Reading this bit always returns 0."]
pub struct LOAD_R(crate::FieldReader<bool, LOAD_A>);
impl LOAD_R {
pub(crate) fn new(bits: bool) -> Self {
LOAD_R(crate::FieldReader::new(bits))
}
#[doc = r"Get enumerated values variant"]
#[inline(always)]
pub fn variant(&self) -> LOAD_A {
match self.bits {
false => LOAD_A::NO_FORCE_LOAD,
true => LOAD_A::FORCE_LOAD,
}
}
#[doc = "Checks if the value of the field is `NO_FORCE_LOAD`"]
#[inline(always)]
pub fn is_no_force_load(&self) -> bool {
**self == LOAD_A::NO_FORCE_LOAD
}
#[doc = "Checks if the value of the field is `FORCE_LOAD`"]
#[inline(always)]
pub fn is_force_load(&self) -> bool {
**self == LOAD_A::FORCE_LOAD
}
}
impl core::ops::Deref for LOAD_R {
type Target = crate::FieldReader<bool, LOAD_A>;
#[inline(always)]
fn deref(&self) -> &Self::Target {
&self.0
}
}
#[doc = "Field `LOAD` writer - Determines how the timer interval value IVALUE -1 is loaded into the TIMERn register. This bit is write-only. Reading this bit always returns 0."]
pub struct LOAD_W<'a> {
w: &'a mut W,
}
impl<'a> LOAD_W<'a> {
#[doc = r"Writes `variant` to the field"]
#[inline(always)]
pub fn variant(self, variant: LOAD_A) -> &'a mut W {
self.bit(variant.into())
}
#[doc = "No force load. The load from the INTVALn register to the TIMERn register is processed at the end of the time interval if the repeat mode is selected."]
#[inline(always)]
pub fn no_force_load(self) -> &'a mut W {
self.variant(LOAD_A::NO_FORCE_LOAD)
}
#[doc = "Force load. The INTVALn interval value IVALUE -1 is immediately loaded into the TIMERn register while TIMERn is running."]
#[inline(always)]
pub fn force_load(self) -> &'a mut W {
self.variant(LOAD_A::FORCE_LOAD)
}
#[doc = r"Sets the field bit"]
#[inline(always)]
pub fn set_bit(self) -> &'a mut W {
self.bit(true)
}
#[doc = r"Clears the field bit"]
#[inline(always)]
pub fn clear_bit(self) -> &'a mut W {
self.bit(false)
}
#[doc = r"Writes raw bits to the field"]
#[inline(always)]
pub fn bit(self, value: bool) -> &'a mut W {
self.w.bits = (self.w.bits & !(0x01 << 31)) | ((value as u32 & 0x01) << 31);
self.w
}
}
impl R {
#[doc = "Bits 0:30 - Time interval load value. This value is loaded into the TIMERn register and the MRT channel n starts counting down from IVALUE -1. If the timer is idle, writing a non-zero value to this bit field starts the timer immediately. If the timer is running, writing a zero to this bit field does the following: If LOAD = 1, the timer stops immediately. If LOAD = 0, the timer stops at the end of the time interval."]
#[inline(always)]
pub fn ivalue(&self) -> IVALUE_R {
IVALUE_R::new((self.bits & 0x7fff_ffff) as u32)
}
#[doc = "Bit 31 - Determines how the timer interval value IVALUE -1 is loaded into the TIMERn register. This bit is write-only. Reading this bit always returns 0."]
#[inline(always)]
pub fn load(&self) -> LOAD_R {
LOAD_R::new(((self.bits >> 31) & 0x01) != 0)
}
}
impl W {
#[doc = "Bits 0:30 - Time interval load value. This value is loaded into the TIMERn register and the MRT channel n starts counting down from IVALUE -1. If the timer is idle, writing a non-zero value to this bit field starts the timer immediately. If the timer is running, writing a zero to this bit field does the following: If LOAD = 1, the timer stops immediately. If LOAD = 0, the timer stops at the end of the time interval."]
#[inline(always)]
pub fn ivalue(&mut self) -> IVALUE_W {
IVALUE_W { w: self }
}
#[doc = "Bit 31 - Determines how the timer interval value IVALUE -1 is loaded into the TIMERn register. This bit is write-only. Reading this bit always returns 0."]
#[inline(always)]
pub fn load(&mut self) -> LOAD_W {
LOAD_W { w: self }
}
#[doc = "Writes raw bits to the register."]
#[inline(always)]
pub unsafe fn bits(&mut self, bits: u32) -> &mut Self {
self.0.bits(bits);
self
}
}
#[doc = "MRT Time interval value register. This value is loaded into the TIMER register.\n\nThis register you can [`read`](crate::generic::Reg::read), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [intval](index.html) module"]
pub struct INTVAL_SPEC;
impl crate::RegisterSpec for INTVAL_SPEC {
type Ux = u32;
}
#[doc = "`read()` method returns [intval::R](R) reader structure"]
impl crate::Readable for INTVAL_SPEC {
type Reader = R;
}
#[doc = "`write(|w| ..)` method takes [intval::W](W) writer structure"]
impl crate::Writable for INTVAL_SPEC {
type Writer = W;
}
#[doc = "`reset()` method sets INTVAL to value 0"]
impl crate::Resettable for INTVAL_SPEC {
#[inline(always)]
fn reset_value() -> Self::Ux {
0
}
}