#[doc = r"Register block"]
#[repr(C)]
pub struct RegisterBlock {
#[doc = "0x00..0x1c - Input mux register for SCT0 input."]
pub sct0_inmux: [SCT0_INMUX; 7],
_reserved1: [u8; 0x04],
#[doc = "0x20..0x30 - Capture select registers for TIMER0 inputs."]
pub timer0captsel: [TIMER0CAPTSEL; 4],
_reserved2: [u8; 0x10],
#[doc = "0x40..0x50 - Capture select registers for TIMER1 inputs."]
pub timer1captsel: [TIMER1CAPTSEL; 4],
_reserved3: [u8; 0x10],
#[doc = "0x60..0x70 - Capture select registers for TIMER2 inputs."]
pub timer2captsel: [TIMER2CAPTSEL; 4],
_reserved4: [u8; 0x50],
#[doc = "0xc0..0xe0 - Pin interrupt select register."]
pub pintsel: [PINTSEL; 8],
#[doc = "0xe0..0x13c - Trigger select register for DMA0 channel."]
pub dma0_itrig_inmux: [DMA0_ITRIG_INMUX; 23],
_reserved6: [u8; 0x24],
#[doc = "0x160..0x170 - DMA0 output trigger selection to become DMA0 trigger."]
pub dma0_otrig_inmux: [DMA0_OTRIG_INMUX; 4],
_reserved7: [u8; 0x10],
#[doc = "0x180 - Selection for frequency measurement reference clock."]
pub freqmeas_ref: FREQMEAS_REF,
#[doc = "0x184 - Selection for frequency measurement target clock."]
pub freqmeas_target: FREQMEAS_TARGET,
_reserved9: [u8; 0x18],
#[doc = "0x1a0..0x1b0 - Capture select registers for TIMER3 inputs."]
pub timer3captsel: [TIMER3CAPTSEL; 4],
_reserved10: [u8; 0x10],
#[doc = "0x1c0..0x1d0 - Capture select registers for TIMER4 inputs."]
pub timer4captsel: [TIMER4CAPTSEL; 4],
_reserved11: [u8; 0x10],
#[doc = "0x1e0..0x1e8 - Pin interrupt secure select register."]
pub pintsecsel: [PINTSECSEL; 2],
_reserved12: [u8; 0x18],
#[doc = "0x200..0x228 - Trigger select register for DMA1 channel."]
pub dma1_itrig_inmux: [DMA1_ITRIG_INMUX; 10],
_reserved13: [u8; 0x18],
#[doc = "0x240..0x250 - DMA1 output trigger selection to become DMA1 trigger."]
pub dma1_otrig_inmux: [DMA1_OTRIG_INMUX; 4],
_reserved14: [u8; 0x04f0],
#[doc = "0x740 - Enable DMA0 requests."]
pub dma0_req_ena: DMA0_REQ_ENA,
_reserved15: [u8; 0x04],
#[doc = "0x748 - Set one or several bits in DMA0_REQ_ENA register."]
pub dma0_req_ena_set: DMA0_REQ_ENA_SET,
_reserved16: [u8; 0x04],
#[doc = "0x750 - Clear one or several bits in DMA0_REQ_ENA register."]
pub dma0_req_ena_clr: DMA0_REQ_ENA_CLR,
_reserved17: [u8; 0x0c],
#[doc = "0x760 - Enable DMA1 requests."]
pub dma1_req_ena: DMA1_REQ_ENA,
_reserved18: [u8; 0x04],
#[doc = "0x768 - Set one or several bits in DMA1_REQ_ENA register."]
pub dma1_req_ena_set: DMA1_REQ_ENA_SET,
_reserved19: [u8; 0x04],
#[doc = "0x770 - Clear one or several bits in DMA1_REQ_ENA register."]
pub dma1_req_ena_clr: DMA1_REQ_ENA_CLR,
_reserved20: [u8; 0x0c],
#[doc = "0x780 - Enable DMA0 triggers."]
pub dma0_itrig_ena: DMA0_ITRIG_ENA,
_reserved21: [u8; 0x04],
#[doc = "0x788 - Set one or several bits in DMA0_ITRIG_ENA register."]
pub dma0_itrig_ena_set: DMA0_ITRIG_ENA_SET,
_reserved22: [u8; 0x04],
#[doc = "0x790 - Clear one or several bits in DMA0_ITRIG_ENA register."]
pub dma0_itrig_ena_clr: DMA0_ITRIG_ENA_CLR,
_reserved23: [u8; 0x0c],
#[doc = "0x7a0 - Enable DMA1 triggers."]
pub dma1_itrig_ena: DMA1_ITRIG_ENA,
_reserved24: [u8; 0x04],
#[doc = "0x7a8 - Set one or several bits in DMA1_ITRIG_ENA register."]
pub dma1_itrig_ena_set: DMA1_ITRIG_ENA_SET,
_reserved25: [u8; 0x04],
#[doc = "0x7b0 - Clear one or several bits in DMA1_ITRIG_ENA register."]
pub dma1_itrig_ena_clr: DMA1_ITRIG_ENA_CLR,
}
#[doc = "SCT0_INMUX (rw) register accessor: an alias for `Reg<SCT0_INMUX_SPEC>`"]
pub type SCT0_INMUX = crate::Reg<sct0_inmux::SCT0_INMUX_SPEC>;
#[doc = "Input mux register for SCT0 input."]
pub mod sct0_inmux;
#[doc = "TIMER0CAPTSEL (rw) register accessor: an alias for `Reg<TIMER0CAPTSEL_SPEC>`"]
pub type TIMER0CAPTSEL = crate::Reg<timer0captsel::TIMER0CAPTSEL_SPEC>;
#[doc = "Capture select registers for TIMER0 inputs."]
pub mod timer0captsel;
#[doc = "TIMER1CAPTSEL (rw) register accessor: an alias for `Reg<TIMER1CAPTSEL_SPEC>`"]
pub type TIMER1CAPTSEL = crate::Reg<timer1captsel::TIMER1CAPTSEL_SPEC>;
#[doc = "Capture select registers for TIMER1 inputs."]
pub mod timer1captsel;
#[doc = "TIMER2CAPTSEL (rw) register accessor: an alias for `Reg<TIMER2CAPTSEL_SPEC>`"]
pub type TIMER2CAPTSEL = crate::Reg<timer2captsel::TIMER2CAPTSEL_SPEC>;
#[doc = "Capture select registers for TIMER2 inputs."]
pub mod timer2captsel;
#[doc = "PINTSEL (rw) register accessor: an alias for `Reg<PINTSEL_SPEC>`"]
pub type PINTSEL = crate::Reg<pintsel::PINTSEL_SPEC>;
#[doc = "Pin interrupt select register."]
pub mod pintsel;
#[doc = "DMA0_ITRIG_INMUX (rw) register accessor: an alias for `Reg<DMA0_ITRIG_INMUX_SPEC>`"]
pub type DMA0_ITRIG_INMUX = crate::Reg<dma0_itrig_inmux::DMA0_ITRIG_INMUX_SPEC>;
#[doc = "Trigger select register for DMA0 channel."]
pub mod dma0_itrig_inmux;
#[doc = "DMA0_OTRIG_INMUX (rw) register accessor: an alias for `Reg<DMA0_OTRIG_INMUX_SPEC>`"]
pub type DMA0_OTRIG_INMUX = crate::Reg<dma0_otrig_inmux::DMA0_OTRIG_INMUX_SPEC>;
#[doc = "DMA0 output trigger selection to become DMA0 trigger."]
pub mod dma0_otrig_inmux;
#[doc = "FREQMEAS_REF (rw) register accessor: an alias for `Reg<FREQMEAS_REF_SPEC>`"]
pub type FREQMEAS_REF = crate::Reg<freqmeas_ref::FREQMEAS_REF_SPEC>;
#[doc = "Selection for frequency measurement reference clock."]
pub mod freqmeas_ref;
#[doc = "FREQMEAS_TARGET (rw) register accessor: an alias for `Reg<FREQMEAS_TARGET_SPEC>`"]
pub type FREQMEAS_TARGET = crate::Reg<freqmeas_target::FREQMEAS_TARGET_SPEC>;
#[doc = "Selection for frequency measurement target clock."]
pub mod freqmeas_target;
#[doc = "TIMER3CAPTSEL (rw) register accessor: an alias for `Reg<TIMER3CAPTSEL_SPEC>`"]
pub type TIMER3CAPTSEL = crate::Reg<timer3captsel::TIMER3CAPTSEL_SPEC>;
#[doc = "Capture select registers for TIMER3 inputs."]
pub mod timer3captsel;
#[doc = "TIMER4CAPTSEL (rw) register accessor: an alias for `Reg<TIMER4CAPTSEL_SPEC>`"]
pub type TIMER4CAPTSEL = crate::Reg<timer4captsel::TIMER4CAPTSEL_SPEC>;
#[doc = "Capture select registers for TIMER4 inputs."]
pub mod timer4captsel;
#[doc = "PINTSECSEL (rw) register accessor: an alias for `Reg<PINTSECSEL_SPEC>`"]
pub type PINTSECSEL = crate::Reg<pintsecsel::PINTSECSEL_SPEC>;
#[doc = "Pin interrupt secure select register."]
pub mod pintsecsel;
#[doc = "DMA1_ITRIG_INMUX (rw) register accessor: an alias for `Reg<DMA1_ITRIG_INMUX_SPEC>`"]
pub type DMA1_ITRIG_INMUX = crate::Reg<dma1_itrig_inmux::DMA1_ITRIG_INMUX_SPEC>;
#[doc = "Trigger select register for DMA1 channel."]
pub mod dma1_itrig_inmux;
#[doc = "DMA1_OTRIG_INMUX (rw) register accessor: an alias for `Reg<DMA1_OTRIG_INMUX_SPEC>`"]
pub type DMA1_OTRIG_INMUX = crate::Reg<dma1_otrig_inmux::DMA1_OTRIG_INMUX_SPEC>;
#[doc = "DMA1 output trigger selection to become DMA1 trigger."]
pub mod dma1_otrig_inmux;
#[doc = "DMA0_REQ_ENA (rw) register accessor: an alias for `Reg<DMA0_REQ_ENA_SPEC>`"]
pub type DMA0_REQ_ENA = crate::Reg<dma0_req_ena::DMA0_REQ_ENA_SPEC>;
#[doc = "Enable DMA0 requests."]
pub mod dma0_req_ena;
#[doc = "DMA0_REQ_ENA_SET (w) register accessor: an alias for `Reg<DMA0_REQ_ENA_SET_SPEC>`"]
pub type DMA0_REQ_ENA_SET = crate::Reg<dma0_req_ena_set::DMA0_REQ_ENA_SET_SPEC>;
#[doc = "Set one or several bits in DMA0_REQ_ENA register."]
pub mod dma0_req_ena_set;
#[doc = "DMA0_REQ_ENA_CLR (w) register accessor: an alias for `Reg<DMA0_REQ_ENA_CLR_SPEC>`"]
pub type DMA0_REQ_ENA_CLR = crate::Reg<dma0_req_ena_clr::DMA0_REQ_ENA_CLR_SPEC>;
#[doc = "Clear one or several bits in DMA0_REQ_ENA register."]
pub mod dma0_req_ena_clr;
#[doc = "DMA1_REQ_ENA (rw) register accessor: an alias for `Reg<DMA1_REQ_ENA_SPEC>`"]
pub type DMA1_REQ_ENA = crate::Reg<dma1_req_ena::DMA1_REQ_ENA_SPEC>;
#[doc = "Enable DMA1 requests."]
pub mod dma1_req_ena;
#[doc = "DMA1_REQ_ENA_SET (w) register accessor: an alias for `Reg<DMA1_REQ_ENA_SET_SPEC>`"]
pub type DMA1_REQ_ENA_SET = crate::Reg<dma1_req_ena_set::DMA1_REQ_ENA_SET_SPEC>;
#[doc = "Set one or several bits in DMA1_REQ_ENA register."]
pub mod dma1_req_ena_set;
#[doc = "DMA1_REQ_ENA_CLR (w) register accessor: an alias for `Reg<DMA1_REQ_ENA_CLR_SPEC>`"]
pub type DMA1_REQ_ENA_CLR = crate::Reg<dma1_req_ena_clr::DMA1_REQ_ENA_CLR_SPEC>;
#[doc = "Clear one or several bits in DMA1_REQ_ENA register."]
pub mod dma1_req_ena_clr;
#[doc = "DMA0_ITRIG_ENA (rw) register accessor: an alias for `Reg<DMA0_ITRIG_ENA_SPEC>`"]
pub type DMA0_ITRIG_ENA = crate::Reg<dma0_itrig_ena::DMA0_ITRIG_ENA_SPEC>;
#[doc = "Enable DMA0 triggers."]
pub mod dma0_itrig_ena;
#[doc = "DMA0_ITRIG_ENA_SET (w) register accessor: an alias for `Reg<DMA0_ITRIG_ENA_SET_SPEC>`"]
pub type DMA0_ITRIG_ENA_SET = crate::Reg<dma0_itrig_ena_set::DMA0_ITRIG_ENA_SET_SPEC>;
#[doc = "Set one or several bits in DMA0_ITRIG_ENA register."]
pub mod dma0_itrig_ena_set;
#[doc = "DMA0_ITRIG_ENA_CLR (w) register accessor: an alias for `Reg<DMA0_ITRIG_ENA_CLR_SPEC>`"]
pub type DMA0_ITRIG_ENA_CLR = crate::Reg<dma0_itrig_ena_clr::DMA0_ITRIG_ENA_CLR_SPEC>;
#[doc = "Clear one or several bits in DMA0_ITRIG_ENA register."]
pub mod dma0_itrig_ena_clr;
#[doc = "DMA1_ITRIG_ENA (rw) register accessor: an alias for `Reg<DMA1_ITRIG_ENA_SPEC>`"]
pub type DMA1_ITRIG_ENA = crate::Reg<dma1_itrig_ena::DMA1_ITRIG_ENA_SPEC>;
#[doc = "Enable DMA1 triggers."]
pub mod dma1_itrig_ena;
#[doc = "DMA1_ITRIG_ENA_SET (w) register accessor: an alias for `Reg<DMA1_ITRIG_ENA_SET_SPEC>`"]
pub type DMA1_ITRIG_ENA_SET = crate::Reg<dma1_itrig_ena_set::DMA1_ITRIG_ENA_SET_SPEC>;
#[doc = "Set one or several bits in DMA1_ITRIG_ENA register."]
pub mod dma1_itrig_ena_set;
#[doc = "DMA1_ITRIG_ENA_CLR (w) register accessor: an alias for `Reg<DMA1_ITRIG_ENA_CLR_SPEC>`"]
pub type DMA1_ITRIG_ENA_CLR = crate::Reg<dma1_itrig_ena_clr::DMA1_ITRIG_ENA_CLR_SPEC>;
#[doc = "Clear one or several bits in DMA1_ITRIG_ENA register."]
pub mod dma1_itrig_ena_clr;