[−][src]Type Definition lpc54606_pac::syscon::pdsleepcfg0::R
type R = R<u32, PDSLEEPCFG0>;
Reader of register PDSLEEPCFG0
Methods
impl R
[src]
pub fn pden_fro(&self) -> PDEN_FRO_R
[src]
Bit 4 - FRO oscillator.
pub fn pden_ts(&self) -> PDEN_TS_R
[src]
Bit 6 - Temp sensor.
pub fn pden_bod_rst(&self) -> PDEN_BOD_RST_R
[src]
Bit 7 - Brown-out Detect reset.
pub fn pden_bod_intr(&self) -> PDEN_BOD_INTR_R
[src]
Bit 8 - Brown-out Detect interrupt.
pub fn pden_vd2_ana(&self) -> PDEN_VD2_ANA_R
[src]
Bit 9 - Analog supply for System Oscillator (also enable/disable bit 3 in PDRUNCFG1 register), Temperature Sensor (also, enable/disable bit 6), ADC (also, enable/disable bits 10, 19, and 23).
pub fn pden_adc0(&self) -> PDEN_ADC0_R
[src]
Bit 10 - ADC power.
pub fn pden_sramx(&self) -> PDEN_SRAMX_R
[src]
Bit 13 - PDEN_SRAMX controls SRAMX (also enable/disable bit 27).
pub fn pden_sram0(&self) -> PDEN_SRAM0_R
[src]
Bit 14 - PDEN_SRAM0 controls SRAM0 (also enable/disable bit 27).
pub fn pden_sram1_2_3(&self) -> PDEN_SRAM1_2_3_R
[src]
Bit 15 - PDEN_SRAM1_2_3 controls SRAM1, SRAM2, and SRAM3 (also enable/disable bit 27).
pub fn pden_usb_ram(&self) -> PDEN_USB_RAM_R
[src]
Bit 16 - PDEN_USB_SRAM controls USB_RAM (also enable/disable bit 27).
pub fn pden_rom(&self) -> PDEN_ROM_R
[src]
Bit 17 - ROM (also enable/disable bit 27).
pub fn pden_vdda(&self) -> PDEN_VDDA_R
[src]
Bit 19 - Vdda to the ADC, must be enabled for the ADC to work (also enable/disable bit 9, 10, and 23).
pub fn pden_wdt_osc(&self) -> PDEN_WDT_OSC_R
[src]
Bit 20 - Watchdog oscillator.
pub fn pden_usb0_phy(&self) -> PDEN_USB0_PHY_R
[src]
Bit 21 - USB0 PHY power (also enable/disable bit 28).
pub fn pden_sys_pll(&self) -> PDEN_SYS_PLL_R
[src]
Bit 22 - System PLL (PLL0) power (also enable/disable bit 26).
pub fn pden_vrefp(&self) -> PDEN_VREFP_R
[src]
Bit 23 - VREFP to the ADC must be enabled for the ADC to work (also enable/disable bit 9, 10, and 19).
pub fn pden_vd3(&self) -> PDEN_VD3_R
[src]
Bit 26 - Power control for all PLLs.
pub fn pden_vd4(&self) -> PDEN_VD4_R
[src]
Bit 27 - Power control for all SRAMs and ROM.
pub fn pden_vd5(&self) -> PDEN_VD5_R
[src]
Bit 28 - Power control both USB0 PHY and USB1 PHY.
pub fn pden_vd6(&self) -> PDEN_VD6_R
[src]
Bit 29 - Power control for EEPROM.