#[doc = r" Value read from the register"]
pub struct R {
bits: u32,
}
#[doc = r" Value to write to the register"]
pub struct W {
bits: u32,
}
impl super::MPIN {
#[doc = r" Modifies the contents of the register"]
#[inline]
pub fn modify<F>(&self, f: F)
where
for<'w> F: FnOnce(&R, &'w mut W) -> &'w mut W,
{
let bits = self.register.get();
let r = R { bits: bits };
let mut w = W { bits: bits };
f(&r, &mut w);
self.register.set(w.bits);
}
#[doc = r" Reads the contents of the register"]
#[inline]
pub fn read(&self) -> R {
R {
bits: self.register.get(),
}
}
#[doc = r" Writes to the register"]
#[inline]
pub fn write<F>(&self, f: F)
where
F: FnOnce(&mut W) -> &mut W,
{
let mut w = W::reset_value();
f(&mut w);
self.register.set(w.bits);
}
#[doc = r" Writes the reset value to the register"]
#[inline]
pub fn reset(&self) {
self.write(|w| w)
}
}
#[doc = r" Value of the field"]
pub struct MPORTP0R {
bits: bool,
}
impl MPORTP0R {
#[doc = r" Value of the field as raw bits"]
#[inline]
pub fn bit(&self) -> bool {
self.bits
}
#[doc = r" Returns `true` if the bit is clear (0)"]
#[inline]
pub fn bit_is_clear(&self) -> bool {
!self.bit()
}
#[doc = r" Returns `true` if the bit is set (1)"]
#[inline]
pub fn bit_is_set(&self) -> bool {
self.bit()
}
}
#[doc = r" Value of the field"]
pub struct MPORTP1R {
bits: bool,
}
impl MPORTP1R {
#[doc = r" Value of the field as raw bits"]
#[inline]
pub fn bit(&self) -> bool {
self.bits
}
#[doc = r" Returns `true` if the bit is clear (0)"]
#[inline]
pub fn bit_is_clear(&self) -> bool {
!self.bit()
}
#[doc = r" Returns `true` if the bit is set (1)"]
#[inline]
pub fn bit_is_set(&self) -> bool {
self.bit()
}
}
#[doc = r" Value of the field"]
pub struct MPORTP2R {
bits: bool,
}
impl MPORTP2R {
#[doc = r" Value of the field as raw bits"]
#[inline]
pub fn bit(&self) -> bool {
self.bits
}
#[doc = r" Returns `true` if the bit is clear (0)"]
#[inline]
pub fn bit_is_clear(&self) -> bool {
!self.bit()
}
#[doc = r" Returns `true` if the bit is set (1)"]
#[inline]
pub fn bit_is_set(&self) -> bool {
self.bit()
}
}
#[doc = r" Value of the field"]
pub struct MPORTP3R {
bits: bool,
}
impl MPORTP3R {
#[doc = r" Value of the field as raw bits"]
#[inline]
pub fn bit(&self) -> bool {
self.bits
}
#[doc = r" Returns `true` if the bit is clear (0)"]
#[inline]
pub fn bit_is_clear(&self) -> bool {
!self.bit()
}
#[doc = r" Returns `true` if the bit is set (1)"]
#[inline]
pub fn bit_is_set(&self) -> bool {
self.bit()
}
}
#[doc = r" Value of the field"]
pub struct MPORTP4R {
bits: bool,
}
impl MPORTP4R {
#[doc = r" Value of the field as raw bits"]
#[inline]
pub fn bit(&self) -> bool {
self.bits
}
#[doc = r" Returns `true` if the bit is clear (0)"]
#[inline]
pub fn bit_is_clear(&self) -> bool {
!self.bit()
}
#[doc = r" Returns `true` if the bit is set (1)"]
#[inline]
pub fn bit_is_set(&self) -> bool {
self.bit()
}
}
#[doc = r" Value of the field"]
pub struct MPORTP5R {
bits: bool,
}
impl MPORTP5R {
#[doc = r" Value of the field as raw bits"]
#[inline]
pub fn bit(&self) -> bool {
self.bits
}
#[doc = r" Returns `true` if the bit is clear (0)"]
#[inline]
pub fn bit_is_clear(&self) -> bool {
!self.bit()
}
#[doc = r" Returns `true` if the bit is set (1)"]
#[inline]
pub fn bit_is_set(&self) -> bool {
self.bit()
}
}
#[doc = r" Value of the field"]
pub struct MPORTP6R {
bits: bool,
}
impl MPORTP6R {
#[doc = r" Value of the field as raw bits"]
#[inline]
pub fn bit(&self) -> bool {
self.bits
}
#[doc = r" Returns `true` if the bit is clear (0)"]
#[inline]
pub fn bit_is_clear(&self) -> bool {
!self.bit()
}
#[doc = r" Returns `true` if the bit is set (1)"]
#[inline]
pub fn bit_is_set(&self) -> bool {
self.bit()
}
}
#[doc = r" Value of the field"]
pub struct MPORTP7R {
bits: bool,
}
impl MPORTP7R {
#[doc = r" Value of the field as raw bits"]
#[inline]
pub fn bit(&self) -> bool {
self.bits
}
#[doc = r" Returns `true` if the bit is clear (0)"]
#[inline]
pub fn bit_is_clear(&self) -> bool {
!self.bit()
}
#[doc = r" Returns `true` if the bit is set (1)"]
#[inline]
pub fn bit_is_set(&self) -> bool {
self.bit()
}
}
#[doc = r" Value of the field"]
pub struct MPORTP8R {
bits: bool,
}
impl MPORTP8R {
#[doc = r" Value of the field as raw bits"]
#[inline]
pub fn bit(&self) -> bool {
self.bits
}
#[doc = r" Returns `true` if the bit is clear (0)"]
#[inline]
pub fn bit_is_clear(&self) -> bool {
!self.bit()
}
#[doc = r" Returns `true` if the bit is set (1)"]
#[inline]
pub fn bit_is_set(&self) -> bool {
self.bit()
}
}
#[doc = r" Value of the field"]
pub struct MPORTP9R {
bits: bool,
}
impl MPORTP9R {
#[doc = r" Value of the field as raw bits"]
#[inline]
pub fn bit(&self) -> bool {
self.bits
}
#[doc = r" Returns `true` if the bit is clear (0)"]
#[inline]
pub fn bit_is_clear(&self) -> bool {
!self.bit()
}
#[doc = r" Returns `true` if the bit is set (1)"]
#[inline]
pub fn bit_is_set(&self) -> bool {
self.bit()
}
}
#[doc = r" Value of the field"]
pub struct MPORTP10R {
bits: bool,
}
impl MPORTP10R {
#[doc = r" Value of the field as raw bits"]
#[inline]
pub fn bit(&self) -> bool {
self.bits
}
#[doc = r" Returns `true` if the bit is clear (0)"]
#[inline]
pub fn bit_is_clear(&self) -> bool {
!self.bit()
}
#[doc = r" Returns `true` if the bit is set (1)"]
#[inline]
pub fn bit_is_set(&self) -> bool {
self.bit()
}
}
#[doc = r" Value of the field"]
pub struct MPORTP11R {
bits: bool,
}
impl MPORTP11R {
#[doc = r" Value of the field as raw bits"]
#[inline]
pub fn bit(&self) -> bool {
self.bits
}
#[doc = r" Returns `true` if the bit is clear (0)"]
#[inline]
pub fn bit_is_clear(&self) -> bool {
!self.bit()
}
#[doc = r" Returns `true` if the bit is set (1)"]
#[inline]
pub fn bit_is_set(&self) -> bool {
self.bit()
}
}
#[doc = r" Value of the field"]
pub struct MPORTP12R {
bits: bool,
}
impl MPORTP12R {
#[doc = r" Value of the field as raw bits"]
#[inline]
pub fn bit(&self) -> bool {
self.bits
}
#[doc = r" Returns `true` if the bit is clear (0)"]
#[inline]
pub fn bit_is_clear(&self) -> bool {
!self.bit()
}
#[doc = r" Returns `true` if the bit is set (1)"]
#[inline]
pub fn bit_is_set(&self) -> bool {
self.bit()
}
}
#[doc = r" Value of the field"]
pub struct MPORTP13R {
bits: bool,
}
impl MPORTP13R {
#[doc = r" Value of the field as raw bits"]
#[inline]
pub fn bit(&self) -> bool {
self.bits
}
#[doc = r" Returns `true` if the bit is clear (0)"]
#[inline]
pub fn bit_is_clear(&self) -> bool {
!self.bit()
}
#[doc = r" Returns `true` if the bit is set (1)"]
#[inline]
pub fn bit_is_set(&self) -> bool {
self.bit()
}
}
#[doc = r" Value of the field"]
pub struct MPORTP14R {
bits: bool,
}
impl MPORTP14R {
#[doc = r" Value of the field as raw bits"]
#[inline]
pub fn bit(&self) -> bool {
self.bits
}
#[doc = r" Returns `true` if the bit is clear (0)"]
#[inline]
pub fn bit_is_clear(&self) -> bool {
!self.bit()
}
#[doc = r" Returns `true` if the bit is set (1)"]
#[inline]
pub fn bit_is_set(&self) -> bool {
self.bit()
}
}
#[doc = r" Value of the field"]
pub struct MPORTP15R {
bits: bool,
}
impl MPORTP15R {
#[doc = r" Value of the field as raw bits"]
#[inline]
pub fn bit(&self) -> bool {
self.bits
}
#[doc = r" Returns `true` if the bit is clear (0)"]
#[inline]
pub fn bit_is_clear(&self) -> bool {
!self.bit()
}
#[doc = r" Returns `true` if the bit is set (1)"]
#[inline]
pub fn bit_is_set(&self) -> bool {
self.bit()
}
}
#[doc = r" Value of the field"]
pub struct MPORTP16R {
bits: bool,
}
impl MPORTP16R {
#[doc = r" Value of the field as raw bits"]
#[inline]
pub fn bit(&self) -> bool {
self.bits
}
#[doc = r" Returns `true` if the bit is clear (0)"]
#[inline]
pub fn bit_is_clear(&self) -> bool {
!self.bit()
}
#[doc = r" Returns `true` if the bit is set (1)"]
#[inline]
pub fn bit_is_set(&self) -> bool {
self.bit()
}
}
#[doc = r" Value of the field"]
pub struct MPORTP17R {
bits: bool,
}
impl MPORTP17R {
#[doc = r" Value of the field as raw bits"]
#[inline]
pub fn bit(&self) -> bool {
self.bits
}
#[doc = r" Returns `true` if the bit is clear (0)"]
#[inline]
pub fn bit_is_clear(&self) -> bool {
!self.bit()
}
#[doc = r" Returns `true` if the bit is set (1)"]
#[inline]
pub fn bit_is_set(&self) -> bool {
self.bit()
}
}
#[doc = r" Value of the field"]
pub struct MPORTP18R {
bits: bool,
}
impl MPORTP18R {
#[doc = r" Value of the field as raw bits"]
#[inline]
pub fn bit(&self) -> bool {
self.bits
}
#[doc = r" Returns `true` if the bit is clear (0)"]
#[inline]
pub fn bit_is_clear(&self) -> bool {
!self.bit()
}
#[doc = r" Returns `true` if the bit is set (1)"]
#[inline]
pub fn bit_is_set(&self) -> bool {
self.bit()
}
}
#[doc = r" Value of the field"]
pub struct MPORTP19R {
bits: bool,
}
impl MPORTP19R {
#[doc = r" Value of the field as raw bits"]
#[inline]
pub fn bit(&self) -> bool {
self.bits
}
#[doc = r" Returns `true` if the bit is clear (0)"]
#[inline]
pub fn bit_is_clear(&self) -> bool {
!self.bit()
}
#[doc = r" Returns `true` if the bit is set (1)"]
#[inline]
pub fn bit_is_set(&self) -> bool {
self.bit()
}
}
#[doc = r" Value of the field"]
pub struct MPORTP20R {
bits: bool,
}
impl MPORTP20R {
#[doc = r" Value of the field as raw bits"]
#[inline]
pub fn bit(&self) -> bool {
self.bits
}
#[doc = r" Returns `true` if the bit is clear (0)"]
#[inline]
pub fn bit_is_clear(&self) -> bool {
!self.bit()
}
#[doc = r" Returns `true` if the bit is set (1)"]
#[inline]
pub fn bit_is_set(&self) -> bool {
self.bit()
}
}
#[doc = r" Value of the field"]
pub struct MPORTP21R {
bits: bool,
}
impl MPORTP21R {
#[doc = r" Value of the field as raw bits"]
#[inline]
pub fn bit(&self) -> bool {
self.bits
}
#[doc = r" Returns `true` if the bit is clear (0)"]
#[inline]
pub fn bit_is_clear(&self) -> bool {
!self.bit()
}
#[doc = r" Returns `true` if the bit is set (1)"]
#[inline]
pub fn bit_is_set(&self) -> bool {
self.bit()
}
}
#[doc = r" Value of the field"]
pub struct MPORTP22R {
bits: bool,
}
impl MPORTP22R {
#[doc = r" Value of the field as raw bits"]
#[inline]
pub fn bit(&self) -> bool {
self.bits
}
#[doc = r" Returns `true` if the bit is clear (0)"]
#[inline]
pub fn bit_is_clear(&self) -> bool {
!self.bit()
}
#[doc = r" Returns `true` if the bit is set (1)"]
#[inline]
pub fn bit_is_set(&self) -> bool {
self.bit()
}
}
#[doc = r" Value of the field"]
pub struct MPORTP23R {
bits: bool,
}
impl MPORTP23R {
#[doc = r" Value of the field as raw bits"]
#[inline]
pub fn bit(&self) -> bool {
self.bits
}
#[doc = r" Returns `true` if the bit is clear (0)"]
#[inline]
pub fn bit_is_clear(&self) -> bool {
!self.bit()
}
#[doc = r" Returns `true` if the bit is set (1)"]
#[inline]
pub fn bit_is_set(&self) -> bool {
self.bit()
}
}
#[doc = r" Value of the field"]
pub struct MPORTP24R {
bits: bool,
}
impl MPORTP24R {
#[doc = r" Value of the field as raw bits"]
#[inline]
pub fn bit(&self) -> bool {
self.bits
}
#[doc = r" Returns `true` if the bit is clear (0)"]
#[inline]
pub fn bit_is_clear(&self) -> bool {
!self.bit()
}
#[doc = r" Returns `true` if the bit is set (1)"]
#[inline]
pub fn bit_is_set(&self) -> bool {
self.bit()
}
}
#[doc = r" Value of the field"]
pub struct MPORTP25R {
bits: bool,
}
impl MPORTP25R {
#[doc = r" Value of the field as raw bits"]
#[inline]
pub fn bit(&self) -> bool {
self.bits
}
#[doc = r" Returns `true` if the bit is clear (0)"]
#[inline]
pub fn bit_is_clear(&self) -> bool {
!self.bit()
}
#[doc = r" Returns `true` if the bit is set (1)"]
#[inline]
pub fn bit_is_set(&self) -> bool {
self.bit()
}
}
#[doc = r" Value of the field"]
pub struct MPORTP26R {
bits: bool,
}
impl MPORTP26R {
#[doc = r" Value of the field as raw bits"]
#[inline]
pub fn bit(&self) -> bool {
self.bits
}
#[doc = r" Returns `true` if the bit is clear (0)"]
#[inline]
pub fn bit_is_clear(&self) -> bool {
!self.bit()
}
#[doc = r" Returns `true` if the bit is set (1)"]
#[inline]
pub fn bit_is_set(&self) -> bool {
self.bit()
}
}
#[doc = r" Value of the field"]
pub struct MPORTP27R {
bits: bool,
}
impl MPORTP27R {
#[doc = r" Value of the field as raw bits"]
#[inline]
pub fn bit(&self) -> bool {
self.bits
}
#[doc = r" Returns `true` if the bit is clear (0)"]
#[inline]
pub fn bit_is_clear(&self) -> bool {
!self.bit()
}
#[doc = r" Returns `true` if the bit is set (1)"]
#[inline]
pub fn bit_is_set(&self) -> bool {
self.bit()
}
}
#[doc = r" Value of the field"]
pub struct MPORTP28R {
bits: bool,
}
impl MPORTP28R {
#[doc = r" Value of the field as raw bits"]
#[inline]
pub fn bit(&self) -> bool {
self.bits
}
#[doc = r" Returns `true` if the bit is clear (0)"]
#[inline]
pub fn bit_is_clear(&self) -> bool {
!self.bit()
}
#[doc = r" Returns `true` if the bit is set (1)"]
#[inline]
pub fn bit_is_set(&self) -> bool {
self.bit()
}
}
#[doc = r" Value of the field"]
pub struct MPORTP29R {
bits: bool,
}
impl MPORTP29R {
#[doc = r" Value of the field as raw bits"]
#[inline]
pub fn bit(&self) -> bool {
self.bits
}
#[doc = r" Returns `true` if the bit is clear (0)"]
#[inline]
pub fn bit_is_clear(&self) -> bool {
!self.bit()
}
#[doc = r" Returns `true` if the bit is set (1)"]
#[inline]
pub fn bit_is_set(&self) -> bool {
self.bit()
}
}
#[doc = r" Value of the field"]
pub struct MPORTP30R {
bits: bool,
}
impl MPORTP30R {
#[doc = r" Value of the field as raw bits"]
#[inline]
pub fn bit(&self) -> bool {
self.bits
}
#[doc = r" Returns `true` if the bit is clear (0)"]
#[inline]
pub fn bit_is_clear(&self) -> bool {
!self.bit()
}
#[doc = r" Returns `true` if the bit is set (1)"]
#[inline]
pub fn bit_is_set(&self) -> bool {
self.bit()
}
}
#[doc = r" Value of the field"]
pub struct MPORTP31R {
bits: bool,
}
impl MPORTP31R {
#[doc = r" Value of the field as raw bits"]
#[inline]
pub fn bit(&self) -> bool {
self.bits
}
#[doc = r" Returns `true` if the bit is clear (0)"]
#[inline]
pub fn bit_is_clear(&self) -> bool {
!self.bit()
}
#[doc = r" Returns `true` if the bit is set (1)"]
#[inline]
pub fn bit_is_set(&self) -> bool {
self.bit()
}
}
#[doc = r" Proxy"]
pub struct _MPORTP0W<'a> {
w: &'a mut W,
}
impl<'a> _MPORTP0W<'a> {
#[doc = r" Sets the field bit"]
pub fn set_bit(self) -> &'a mut W {
self.bit(true)
}
#[doc = r" Clears the field bit"]
pub fn clear_bit(self) -> &'a mut W {
self.bit(false)
}
#[doc = r" Writes raw bits to the field"]
#[inline]
pub fn bit(self, value: bool) -> &'a mut W {
const MASK: bool = true;
const OFFSET: u8 = 0;
self.w.bits &= !((MASK as u32) << OFFSET);
self.w.bits |= ((value & MASK) as u32) << OFFSET;
self.w
}
}
#[doc = r" Proxy"]
pub struct _MPORTP1W<'a> {
w: &'a mut W,
}
impl<'a> _MPORTP1W<'a> {
#[doc = r" Sets the field bit"]
pub fn set_bit(self) -> &'a mut W {
self.bit(true)
}
#[doc = r" Clears the field bit"]
pub fn clear_bit(self) -> &'a mut W {
self.bit(false)
}
#[doc = r" Writes raw bits to the field"]
#[inline]
pub fn bit(self, value: bool) -> &'a mut W {
const MASK: bool = true;
const OFFSET: u8 = 1;
self.w.bits &= !((MASK as u32) << OFFSET);
self.w.bits |= ((value & MASK) as u32) << OFFSET;
self.w
}
}
#[doc = r" Proxy"]
pub struct _MPORTP2W<'a> {
w: &'a mut W,
}
impl<'a> _MPORTP2W<'a> {
#[doc = r" Sets the field bit"]
pub fn set_bit(self) -> &'a mut W {
self.bit(true)
}
#[doc = r" Clears the field bit"]
pub fn clear_bit(self) -> &'a mut W {
self.bit(false)
}
#[doc = r" Writes raw bits to the field"]
#[inline]
pub fn bit(self, value: bool) -> &'a mut W {
const MASK: bool = true;
const OFFSET: u8 = 2;
self.w.bits &= !((MASK as u32) << OFFSET);
self.w.bits |= ((value & MASK) as u32) << OFFSET;
self.w
}
}
#[doc = r" Proxy"]
pub struct _MPORTP3W<'a> {
w: &'a mut W,
}
impl<'a> _MPORTP3W<'a> {
#[doc = r" Sets the field bit"]
pub fn set_bit(self) -> &'a mut W {
self.bit(true)
}
#[doc = r" Clears the field bit"]
pub fn clear_bit(self) -> &'a mut W {
self.bit(false)
}
#[doc = r" Writes raw bits to the field"]
#[inline]
pub fn bit(self, value: bool) -> &'a mut W {
const MASK: bool = true;
const OFFSET: u8 = 3;
self.w.bits &= !((MASK as u32) << OFFSET);
self.w.bits |= ((value & MASK) as u32) << OFFSET;
self.w
}
}
#[doc = r" Proxy"]
pub struct _MPORTP4W<'a> {
w: &'a mut W,
}
impl<'a> _MPORTP4W<'a> {
#[doc = r" Sets the field bit"]
pub fn set_bit(self) -> &'a mut W {
self.bit(true)
}
#[doc = r" Clears the field bit"]
pub fn clear_bit(self) -> &'a mut W {
self.bit(false)
}
#[doc = r" Writes raw bits to the field"]
#[inline]
pub fn bit(self, value: bool) -> &'a mut W {
const MASK: bool = true;
const OFFSET: u8 = 4;
self.w.bits &= !((MASK as u32) << OFFSET);
self.w.bits |= ((value & MASK) as u32) << OFFSET;
self.w
}
}
#[doc = r" Proxy"]
pub struct _MPORTP5W<'a> {
w: &'a mut W,
}
impl<'a> _MPORTP5W<'a> {
#[doc = r" Sets the field bit"]
pub fn set_bit(self) -> &'a mut W {
self.bit(true)
}
#[doc = r" Clears the field bit"]
pub fn clear_bit(self) -> &'a mut W {
self.bit(false)
}
#[doc = r" Writes raw bits to the field"]
#[inline]
pub fn bit(self, value: bool) -> &'a mut W {
const MASK: bool = true;
const OFFSET: u8 = 5;
self.w.bits &= !((MASK as u32) << OFFSET);
self.w.bits |= ((value & MASK) as u32) << OFFSET;
self.w
}
}
#[doc = r" Proxy"]
pub struct _MPORTP6W<'a> {
w: &'a mut W,
}
impl<'a> _MPORTP6W<'a> {
#[doc = r" Sets the field bit"]
pub fn set_bit(self) -> &'a mut W {
self.bit(true)
}
#[doc = r" Clears the field bit"]
pub fn clear_bit(self) -> &'a mut W {
self.bit(false)
}
#[doc = r" Writes raw bits to the field"]
#[inline]
pub fn bit(self, value: bool) -> &'a mut W {
const MASK: bool = true;
const OFFSET: u8 = 6;
self.w.bits &= !((MASK as u32) << OFFSET);
self.w.bits |= ((value & MASK) as u32) << OFFSET;
self.w
}
}
#[doc = r" Proxy"]
pub struct _MPORTP7W<'a> {
w: &'a mut W,
}
impl<'a> _MPORTP7W<'a> {
#[doc = r" Sets the field bit"]
pub fn set_bit(self) -> &'a mut W {
self.bit(true)
}
#[doc = r" Clears the field bit"]
pub fn clear_bit(self) -> &'a mut W {
self.bit(false)
}
#[doc = r" Writes raw bits to the field"]
#[inline]
pub fn bit(self, value: bool) -> &'a mut W {
const MASK: bool = true;
const OFFSET: u8 = 7;
self.w.bits &= !((MASK as u32) << OFFSET);
self.w.bits |= ((value & MASK) as u32) << OFFSET;
self.w
}
}
#[doc = r" Proxy"]
pub struct _MPORTP8W<'a> {
w: &'a mut W,
}
impl<'a> _MPORTP8W<'a> {
#[doc = r" Sets the field bit"]
pub fn set_bit(self) -> &'a mut W {
self.bit(true)
}
#[doc = r" Clears the field bit"]
pub fn clear_bit(self) -> &'a mut W {
self.bit(false)
}
#[doc = r" Writes raw bits to the field"]
#[inline]
pub fn bit(self, value: bool) -> &'a mut W {
const MASK: bool = true;
const OFFSET: u8 = 8;
self.w.bits &= !((MASK as u32) << OFFSET);
self.w.bits |= ((value & MASK) as u32) << OFFSET;
self.w
}
}
#[doc = r" Proxy"]
pub struct _MPORTP9W<'a> {
w: &'a mut W,
}
impl<'a> _MPORTP9W<'a> {
#[doc = r" Sets the field bit"]
pub fn set_bit(self) -> &'a mut W {
self.bit(true)
}
#[doc = r" Clears the field bit"]
pub fn clear_bit(self) -> &'a mut W {
self.bit(false)
}
#[doc = r" Writes raw bits to the field"]
#[inline]
pub fn bit(self, value: bool) -> &'a mut W {
const MASK: bool = true;
const OFFSET: u8 = 9;
self.w.bits &= !((MASK as u32) << OFFSET);
self.w.bits |= ((value & MASK) as u32) << OFFSET;
self.w
}
}
#[doc = r" Proxy"]
pub struct _MPORTP10W<'a> {
w: &'a mut W,
}
impl<'a> _MPORTP10W<'a> {
#[doc = r" Sets the field bit"]
pub fn set_bit(self) -> &'a mut W {
self.bit(true)
}
#[doc = r" Clears the field bit"]
pub fn clear_bit(self) -> &'a mut W {
self.bit(false)
}
#[doc = r" Writes raw bits to the field"]
#[inline]
pub fn bit(self, value: bool) -> &'a mut W {
const MASK: bool = true;
const OFFSET: u8 = 10;
self.w.bits &= !((MASK as u32) << OFFSET);
self.w.bits |= ((value & MASK) as u32) << OFFSET;
self.w
}
}
#[doc = r" Proxy"]
pub struct _MPORTP11W<'a> {
w: &'a mut W,
}
impl<'a> _MPORTP11W<'a> {
#[doc = r" Sets the field bit"]
pub fn set_bit(self) -> &'a mut W {
self.bit(true)
}
#[doc = r" Clears the field bit"]
pub fn clear_bit(self) -> &'a mut W {
self.bit(false)
}
#[doc = r" Writes raw bits to the field"]
#[inline]
pub fn bit(self, value: bool) -> &'a mut W {
const MASK: bool = true;
const OFFSET: u8 = 11;
self.w.bits &= !((MASK as u32) << OFFSET);
self.w.bits |= ((value & MASK) as u32) << OFFSET;
self.w
}
}
#[doc = r" Proxy"]
pub struct _MPORTP12W<'a> {
w: &'a mut W,
}
impl<'a> _MPORTP12W<'a> {
#[doc = r" Sets the field bit"]
pub fn set_bit(self) -> &'a mut W {
self.bit(true)
}
#[doc = r" Clears the field bit"]
pub fn clear_bit(self) -> &'a mut W {
self.bit(false)
}
#[doc = r" Writes raw bits to the field"]
#[inline]
pub fn bit(self, value: bool) -> &'a mut W {
const MASK: bool = true;
const OFFSET: u8 = 12;
self.w.bits &= !((MASK as u32) << OFFSET);
self.w.bits |= ((value & MASK) as u32) << OFFSET;
self.w
}
}
#[doc = r" Proxy"]
pub struct _MPORTP13W<'a> {
w: &'a mut W,
}
impl<'a> _MPORTP13W<'a> {
#[doc = r" Sets the field bit"]
pub fn set_bit(self) -> &'a mut W {
self.bit(true)
}
#[doc = r" Clears the field bit"]
pub fn clear_bit(self) -> &'a mut W {
self.bit(false)
}
#[doc = r" Writes raw bits to the field"]
#[inline]
pub fn bit(self, value: bool) -> &'a mut W {
const MASK: bool = true;
const OFFSET: u8 = 13;
self.w.bits &= !((MASK as u32) << OFFSET);
self.w.bits |= ((value & MASK) as u32) << OFFSET;
self.w
}
}
#[doc = r" Proxy"]
pub struct _MPORTP14W<'a> {
w: &'a mut W,
}
impl<'a> _MPORTP14W<'a> {
#[doc = r" Sets the field bit"]
pub fn set_bit(self) -> &'a mut W {
self.bit(true)
}
#[doc = r" Clears the field bit"]
pub fn clear_bit(self) -> &'a mut W {
self.bit(false)
}
#[doc = r" Writes raw bits to the field"]
#[inline]
pub fn bit(self, value: bool) -> &'a mut W {
const MASK: bool = true;
const OFFSET: u8 = 14;
self.w.bits &= !((MASK as u32) << OFFSET);
self.w.bits |= ((value & MASK) as u32) << OFFSET;
self.w
}
}
#[doc = r" Proxy"]
pub struct _MPORTP15W<'a> {
w: &'a mut W,
}
impl<'a> _MPORTP15W<'a> {
#[doc = r" Sets the field bit"]
pub fn set_bit(self) -> &'a mut W {
self.bit(true)
}
#[doc = r" Clears the field bit"]
pub fn clear_bit(self) -> &'a mut W {
self.bit(false)
}
#[doc = r" Writes raw bits to the field"]
#[inline]
pub fn bit(self, value: bool) -> &'a mut W {
const MASK: bool = true;
const OFFSET: u8 = 15;
self.w.bits &= !((MASK as u32) << OFFSET);
self.w.bits |= ((value & MASK) as u32) << OFFSET;
self.w
}
}
#[doc = r" Proxy"]
pub struct _MPORTP16W<'a> {
w: &'a mut W,
}
impl<'a> _MPORTP16W<'a> {
#[doc = r" Sets the field bit"]
pub fn set_bit(self) -> &'a mut W {
self.bit(true)
}
#[doc = r" Clears the field bit"]
pub fn clear_bit(self) -> &'a mut W {
self.bit(false)
}
#[doc = r" Writes raw bits to the field"]
#[inline]
pub fn bit(self, value: bool) -> &'a mut W {
const MASK: bool = true;
const OFFSET: u8 = 16;
self.w.bits &= !((MASK as u32) << OFFSET);
self.w.bits |= ((value & MASK) as u32) << OFFSET;
self.w
}
}
#[doc = r" Proxy"]
pub struct _MPORTP17W<'a> {
w: &'a mut W,
}
impl<'a> _MPORTP17W<'a> {
#[doc = r" Sets the field bit"]
pub fn set_bit(self) -> &'a mut W {
self.bit(true)
}
#[doc = r" Clears the field bit"]
pub fn clear_bit(self) -> &'a mut W {
self.bit(false)
}
#[doc = r" Writes raw bits to the field"]
#[inline]
pub fn bit(self, value: bool) -> &'a mut W {
const MASK: bool = true;
const OFFSET: u8 = 17;
self.w.bits &= !((MASK as u32) << OFFSET);
self.w.bits |= ((value & MASK) as u32) << OFFSET;
self.w
}
}
#[doc = r" Proxy"]
pub struct _MPORTP18W<'a> {
w: &'a mut W,
}
impl<'a> _MPORTP18W<'a> {
#[doc = r" Sets the field bit"]
pub fn set_bit(self) -> &'a mut W {
self.bit(true)
}
#[doc = r" Clears the field bit"]
pub fn clear_bit(self) -> &'a mut W {
self.bit(false)
}
#[doc = r" Writes raw bits to the field"]
#[inline]
pub fn bit(self, value: bool) -> &'a mut W {
const MASK: bool = true;
const OFFSET: u8 = 18;
self.w.bits &= !((MASK as u32) << OFFSET);
self.w.bits |= ((value & MASK) as u32) << OFFSET;
self.w
}
}
#[doc = r" Proxy"]
pub struct _MPORTP19W<'a> {
w: &'a mut W,
}
impl<'a> _MPORTP19W<'a> {
#[doc = r" Sets the field bit"]
pub fn set_bit(self) -> &'a mut W {
self.bit(true)
}
#[doc = r" Clears the field bit"]
pub fn clear_bit(self) -> &'a mut W {
self.bit(false)
}
#[doc = r" Writes raw bits to the field"]
#[inline]
pub fn bit(self, value: bool) -> &'a mut W {
const MASK: bool = true;
const OFFSET: u8 = 19;
self.w.bits &= !((MASK as u32) << OFFSET);
self.w.bits |= ((value & MASK) as u32) << OFFSET;
self.w
}
}
#[doc = r" Proxy"]
pub struct _MPORTP20W<'a> {
w: &'a mut W,
}
impl<'a> _MPORTP20W<'a> {
#[doc = r" Sets the field bit"]
pub fn set_bit(self) -> &'a mut W {
self.bit(true)
}
#[doc = r" Clears the field bit"]
pub fn clear_bit(self) -> &'a mut W {
self.bit(false)
}
#[doc = r" Writes raw bits to the field"]
#[inline]
pub fn bit(self, value: bool) -> &'a mut W {
const MASK: bool = true;
const OFFSET: u8 = 20;
self.w.bits &= !((MASK as u32) << OFFSET);
self.w.bits |= ((value & MASK) as u32) << OFFSET;
self.w
}
}
#[doc = r" Proxy"]
pub struct _MPORTP21W<'a> {
w: &'a mut W,
}
impl<'a> _MPORTP21W<'a> {
#[doc = r" Sets the field bit"]
pub fn set_bit(self) -> &'a mut W {
self.bit(true)
}
#[doc = r" Clears the field bit"]
pub fn clear_bit(self) -> &'a mut W {
self.bit(false)
}
#[doc = r" Writes raw bits to the field"]
#[inline]
pub fn bit(self, value: bool) -> &'a mut W {
const MASK: bool = true;
const OFFSET: u8 = 21;
self.w.bits &= !((MASK as u32) << OFFSET);
self.w.bits |= ((value & MASK) as u32) << OFFSET;
self.w
}
}
#[doc = r" Proxy"]
pub struct _MPORTP22W<'a> {
w: &'a mut W,
}
impl<'a> _MPORTP22W<'a> {
#[doc = r" Sets the field bit"]
pub fn set_bit(self) -> &'a mut W {
self.bit(true)
}
#[doc = r" Clears the field bit"]
pub fn clear_bit(self) -> &'a mut W {
self.bit(false)
}
#[doc = r" Writes raw bits to the field"]
#[inline]
pub fn bit(self, value: bool) -> &'a mut W {
const MASK: bool = true;
const OFFSET: u8 = 22;
self.w.bits &= !((MASK as u32) << OFFSET);
self.w.bits |= ((value & MASK) as u32) << OFFSET;
self.w
}
}
#[doc = r" Proxy"]
pub struct _MPORTP23W<'a> {
w: &'a mut W,
}
impl<'a> _MPORTP23W<'a> {
#[doc = r" Sets the field bit"]
pub fn set_bit(self) -> &'a mut W {
self.bit(true)
}
#[doc = r" Clears the field bit"]
pub fn clear_bit(self) -> &'a mut W {
self.bit(false)
}
#[doc = r" Writes raw bits to the field"]
#[inline]
pub fn bit(self, value: bool) -> &'a mut W {
const MASK: bool = true;
const OFFSET: u8 = 23;
self.w.bits &= !((MASK as u32) << OFFSET);
self.w.bits |= ((value & MASK) as u32) << OFFSET;
self.w
}
}
#[doc = r" Proxy"]
pub struct _MPORTP24W<'a> {
w: &'a mut W,
}
impl<'a> _MPORTP24W<'a> {
#[doc = r" Sets the field bit"]
pub fn set_bit(self) -> &'a mut W {
self.bit(true)
}
#[doc = r" Clears the field bit"]
pub fn clear_bit(self) -> &'a mut W {
self.bit(false)
}
#[doc = r" Writes raw bits to the field"]
#[inline]
pub fn bit(self, value: bool) -> &'a mut W {
const MASK: bool = true;
const OFFSET: u8 = 24;
self.w.bits &= !((MASK as u32) << OFFSET);
self.w.bits |= ((value & MASK) as u32) << OFFSET;
self.w
}
}
#[doc = r" Proxy"]
pub struct _MPORTP25W<'a> {
w: &'a mut W,
}
impl<'a> _MPORTP25W<'a> {
#[doc = r" Sets the field bit"]
pub fn set_bit(self) -> &'a mut W {
self.bit(true)
}
#[doc = r" Clears the field bit"]
pub fn clear_bit(self) -> &'a mut W {
self.bit(false)
}
#[doc = r" Writes raw bits to the field"]
#[inline]
pub fn bit(self, value: bool) -> &'a mut W {
const MASK: bool = true;
const OFFSET: u8 = 25;
self.w.bits &= !((MASK as u32) << OFFSET);
self.w.bits |= ((value & MASK) as u32) << OFFSET;
self.w
}
}
#[doc = r" Proxy"]
pub struct _MPORTP26W<'a> {
w: &'a mut W,
}
impl<'a> _MPORTP26W<'a> {
#[doc = r" Sets the field bit"]
pub fn set_bit(self) -> &'a mut W {
self.bit(true)
}
#[doc = r" Clears the field bit"]
pub fn clear_bit(self) -> &'a mut W {
self.bit(false)
}
#[doc = r" Writes raw bits to the field"]
#[inline]
pub fn bit(self, value: bool) -> &'a mut W {
const MASK: bool = true;
const OFFSET: u8 = 26;
self.w.bits &= !((MASK as u32) << OFFSET);
self.w.bits |= ((value & MASK) as u32) << OFFSET;
self.w
}
}
#[doc = r" Proxy"]
pub struct _MPORTP27W<'a> {
w: &'a mut W,
}
impl<'a> _MPORTP27W<'a> {
#[doc = r" Sets the field bit"]
pub fn set_bit(self) -> &'a mut W {
self.bit(true)
}
#[doc = r" Clears the field bit"]
pub fn clear_bit(self) -> &'a mut W {
self.bit(false)
}
#[doc = r" Writes raw bits to the field"]
#[inline]
pub fn bit(self, value: bool) -> &'a mut W {
const MASK: bool = true;
const OFFSET: u8 = 27;
self.w.bits &= !((MASK as u32) << OFFSET);
self.w.bits |= ((value & MASK) as u32) << OFFSET;
self.w
}
}
#[doc = r" Proxy"]
pub struct _MPORTP28W<'a> {
w: &'a mut W,
}
impl<'a> _MPORTP28W<'a> {
#[doc = r" Sets the field bit"]
pub fn set_bit(self) -> &'a mut W {
self.bit(true)
}
#[doc = r" Clears the field bit"]
pub fn clear_bit(self) -> &'a mut W {
self.bit(false)
}
#[doc = r" Writes raw bits to the field"]
#[inline]
pub fn bit(self, value: bool) -> &'a mut W {
const MASK: bool = true;
const OFFSET: u8 = 28;
self.w.bits &= !((MASK as u32) << OFFSET);
self.w.bits |= ((value & MASK) as u32) << OFFSET;
self.w
}
}
#[doc = r" Proxy"]
pub struct _MPORTP29W<'a> {
w: &'a mut W,
}
impl<'a> _MPORTP29W<'a> {
#[doc = r" Sets the field bit"]
pub fn set_bit(self) -> &'a mut W {
self.bit(true)
}
#[doc = r" Clears the field bit"]
pub fn clear_bit(self) -> &'a mut W {
self.bit(false)
}
#[doc = r" Writes raw bits to the field"]
#[inline]
pub fn bit(self, value: bool) -> &'a mut W {
const MASK: bool = true;
const OFFSET: u8 = 29;
self.w.bits &= !((MASK as u32) << OFFSET);
self.w.bits |= ((value & MASK) as u32) << OFFSET;
self.w
}
}
#[doc = r" Proxy"]
pub struct _MPORTP30W<'a> {
w: &'a mut W,
}
impl<'a> _MPORTP30W<'a> {
#[doc = r" Sets the field bit"]
pub fn set_bit(self) -> &'a mut W {
self.bit(true)
}
#[doc = r" Clears the field bit"]
pub fn clear_bit(self) -> &'a mut W {
self.bit(false)
}
#[doc = r" Writes raw bits to the field"]
#[inline]
pub fn bit(self, value: bool) -> &'a mut W {
const MASK: bool = true;
const OFFSET: u8 = 30;
self.w.bits &= !((MASK as u32) << OFFSET);
self.w.bits |= ((value & MASK) as u32) << OFFSET;
self.w
}
}
#[doc = r" Proxy"]
pub struct _MPORTP31W<'a> {
w: &'a mut W,
}
impl<'a> _MPORTP31W<'a> {
#[doc = r" Sets the field bit"]
pub fn set_bit(self) -> &'a mut W {
self.bit(true)
}
#[doc = r" Clears the field bit"]
pub fn clear_bit(self) -> &'a mut W {
self.bit(false)
}
#[doc = r" Writes raw bits to the field"]
#[inline]
pub fn bit(self, value: bool) -> &'a mut W {
const MASK: bool = true;
const OFFSET: u8 = 31;
self.w.bits &= !((MASK as u32) << OFFSET);
self.w.bits |= ((value & MASK) as u32) << OFFSET;
self.w
}
}
impl R {
#[doc = r" Value of the register as raw bits"]
#[inline]
pub fn bits(&self) -> u32 {
self.bits
}
#[doc = "Bit 0 - Masked port register (bit 0 = GPIOm[0], bit 1 = GPIOm[1], ..., bit 31 = GPIOm[31]). 0 = Read: pin is LOW and/or the corresponding bit in the MASK register is 1; write: clear output bit if the corresponding bit in the MASK register is 0. 1 = Read: pin is HIGH and the corresponding bit in the MASK register is 0; write: set output bit if the corresponding bit in the MASK register is 0."]
#[inline]
pub fn mportp0(&self) -> MPORTP0R {
let bits = {
const MASK: bool = true;
const OFFSET: u8 = 0;
((self.bits >> OFFSET) & MASK as u32) != 0
};
MPORTP0R { bits }
}
#[doc = "Bit 1 - Masked port register (bit 0 = GPIOm[0], bit 1 = GPIOm[1], ..., bit 31 = GPIOm[31]). 0 = Read: pin is LOW and/or the corresponding bit in the MASK register is 1; write: clear output bit if the corresponding bit in the MASK register is 0. 1 = Read: pin is HIGH and the corresponding bit in the MASK register is 0; write: set output bit if the corresponding bit in the MASK register is 0."]
#[inline]
pub fn mportp1(&self) -> MPORTP1R {
let bits = {
const MASK: bool = true;
const OFFSET: u8 = 1;
((self.bits >> OFFSET) & MASK as u32) != 0
};
MPORTP1R { bits }
}
#[doc = "Bit 2 - Masked port register (bit 0 = GPIOm[0], bit 1 = GPIOm[1], ..., bit 31 = GPIOm[31]). 0 = Read: pin is LOW and/or the corresponding bit in the MASK register is 1; write: clear output bit if the corresponding bit in the MASK register is 0. 1 = Read: pin is HIGH and the corresponding bit in the MASK register is 0; write: set output bit if the corresponding bit in the MASK register is 0."]
#[inline]
pub fn mportp2(&self) -> MPORTP2R {
let bits = {
const MASK: bool = true;
const OFFSET: u8 = 2;
((self.bits >> OFFSET) & MASK as u32) != 0
};
MPORTP2R { bits }
}
#[doc = "Bit 3 - Masked port register (bit 0 = GPIOm[0], bit 1 = GPIOm[1], ..., bit 31 = GPIOm[31]). 0 = Read: pin is LOW and/or the corresponding bit in the MASK register is 1; write: clear output bit if the corresponding bit in the MASK register is 0. 1 = Read: pin is HIGH and the corresponding bit in the MASK register is 0; write: set output bit if the corresponding bit in the MASK register is 0."]
#[inline]
pub fn mportp3(&self) -> MPORTP3R {
let bits = {
const MASK: bool = true;
const OFFSET: u8 = 3;
((self.bits >> OFFSET) & MASK as u32) != 0
};
MPORTP3R { bits }
}
#[doc = "Bit 4 - Masked port register (bit 0 = GPIOm[0], bit 1 = GPIOm[1], ..., bit 31 = GPIOm[31]). 0 = Read: pin is LOW and/or the corresponding bit in the MASK register is 1; write: clear output bit if the corresponding bit in the MASK register is 0. 1 = Read: pin is HIGH and the corresponding bit in the MASK register is 0; write: set output bit if the corresponding bit in the MASK register is 0."]
#[inline]
pub fn mportp4(&self) -> MPORTP4R {
let bits = {
const MASK: bool = true;
const OFFSET: u8 = 4;
((self.bits >> OFFSET) & MASK as u32) != 0
};
MPORTP4R { bits }
}
#[doc = "Bit 5 - Masked port register (bit 0 = GPIOm[0], bit 1 = GPIOm[1], ..., bit 31 = GPIOm[31]). 0 = Read: pin is LOW and/or the corresponding bit in the MASK register is 1; write: clear output bit if the corresponding bit in the MASK register is 0. 1 = Read: pin is HIGH and the corresponding bit in the MASK register is 0; write: set output bit if the corresponding bit in the MASK register is 0."]
#[inline]
pub fn mportp5(&self) -> MPORTP5R {
let bits = {
const MASK: bool = true;
const OFFSET: u8 = 5;
((self.bits >> OFFSET) & MASK as u32) != 0
};
MPORTP5R { bits }
}
#[doc = "Bit 6 - Masked port register (bit 0 = GPIOm[0], bit 1 = GPIOm[1], ..., bit 31 = GPIOm[31]). 0 = Read: pin is LOW and/or the corresponding bit in the MASK register is 1; write: clear output bit if the corresponding bit in the MASK register is 0. 1 = Read: pin is HIGH and the corresponding bit in the MASK register is 0; write: set output bit if the corresponding bit in the MASK register is 0."]
#[inline]
pub fn mportp6(&self) -> MPORTP6R {
let bits = {
const MASK: bool = true;
const OFFSET: u8 = 6;
((self.bits >> OFFSET) & MASK as u32) != 0
};
MPORTP6R { bits }
}
#[doc = "Bit 7 - Masked port register (bit 0 = GPIOm[0], bit 1 = GPIOm[1], ..., bit 31 = GPIOm[31]). 0 = Read: pin is LOW and/or the corresponding bit in the MASK register is 1; write: clear output bit if the corresponding bit in the MASK register is 0. 1 = Read: pin is HIGH and the corresponding bit in the MASK register is 0; write: set output bit if the corresponding bit in the MASK register is 0."]
#[inline]
pub fn mportp7(&self) -> MPORTP7R {
let bits = {
const MASK: bool = true;
const OFFSET: u8 = 7;
((self.bits >> OFFSET) & MASK as u32) != 0
};
MPORTP7R { bits }
}
#[doc = "Bit 8 - Masked port register (bit 0 = GPIOm[0], bit 1 = GPIOm[1], ..., bit 31 = GPIOm[31]). 0 = Read: pin is LOW and/or the corresponding bit in the MASK register is 1; write: clear output bit if the corresponding bit in the MASK register is 0. 1 = Read: pin is HIGH and the corresponding bit in the MASK register is 0; write: set output bit if the corresponding bit in the MASK register is 0."]
#[inline]
pub fn mportp8(&self) -> MPORTP8R {
let bits = {
const MASK: bool = true;
const OFFSET: u8 = 8;
((self.bits >> OFFSET) & MASK as u32) != 0
};
MPORTP8R { bits }
}
#[doc = "Bit 9 - Masked port register (bit 0 = GPIOm[0], bit 1 = GPIOm[1], ..., bit 31 = GPIOm[31]). 0 = Read: pin is LOW and/or the corresponding bit in the MASK register is 1; write: clear output bit if the corresponding bit in the MASK register is 0. 1 = Read: pin is HIGH and the corresponding bit in the MASK register is 0; write: set output bit if the corresponding bit in the MASK register is 0."]
#[inline]
pub fn mportp9(&self) -> MPORTP9R {
let bits = {
const MASK: bool = true;
const OFFSET: u8 = 9;
((self.bits >> OFFSET) & MASK as u32) != 0
};
MPORTP9R { bits }
}
#[doc = "Bit 10 - Masked port register (bit 0 = GPIOm[0], bit 1 = GPIOm[1], ..., bit 31 = GPIOm[31]). 0 = Read: pin is LOW and/or the corresponding bit in the MASK register is 1; write: clear output bit if the corresponding bit in the MASK register is 0. 1 = Read: pin is HIGH and the corresponding bit in the MASK register is 0; write: set output bit if the corresponding bit in the MASK register is 0."]
#[inline]
pub fn mportp10(&self) -> MPORTP10R {
let bits = {
const MASK: bool = true;
const OFFSET: u8 = 10;
((self.bits >> OFFSET) & MASK as u32) != 0
};
MPORTP10R { bits }
}
#[doc = "Bit 11 - Masked port register (bit 0 = GPIOm[0], bit 1 = GPIOm[1], ..., bit 31 = GPIOm[31]). 0 = Read: pin is LOW and/or the corresponding bit in the MASK register is 1; write: clear output bit if the corresponding bit in the MASK register is 0. 1 = Read: pin is HIGH and the corresponding bit in the MASK register is 0; write: set output bit if the corresponding bit in the MASK register is 0."]
#[inline]
pub fn mportp11(&self) -> MPORTP11R {
let bits = {
const MASK: bool = true;
const OFFSET: u8 = 11;
((self.bits >> OFFSET) & MASK as u32) != 0
};
MPORTP11R { bits }
}
#[doc = "Bit 12 - Masked port register (bit 0 = GPIOm[0], bit 1 = GPIOm[1], ..., bit 31 = GPIOm[31]). 0 = Read: pin is LOW and/or the corresponding bit in the MASK register is 1; write: clear output bit if the corresponding bit in the MASK register is 0. 1 = Read: pin is HIGH and the corresponding bit in the MASK register is 0; write: set output bit if the corresponding bit in the MASK register is 0."]
#[inline]
pub fn mportp12(&self) -> MPORTP12R {
let bits = {
const MASK: bool = true;
const OFFSET: u8 = 12;
((self.bits >> OFFSET) & MASK as u32) != 0
};
MPORTP12R { bits }
}
#[doc = "Bit 13 - Masked port register (bit 0 = GPIOm[0], bit 1 = GPIOm[1], ..., bit 31 = GPIOm[31]). 0 = Read: pin is LOW and/or the corresponding bit in the MASK register is 1; write: clear output bit if the corresponding bit in the MASK register is 0. 1 = Read: pin is HIGH and the corresponding bit in the MASK register is 0; write: set output bit if the corresponding bit in the MASK register is 0."]
#[inline]
pub fn mportp13(&self) -> MPORTP13R {
let bits = {
const MASK: bool = true;
const OFFSET: u8 = 13;
((self.bits >> OFFSET) & MASK as u32) != 0
};
MPORTP13R { bits }
}
#[doc = "Bit 14 - Masked port register (bit 0 = GPIOm[0], bit 1 = GPIOm[1], ..., bit 31 = GPIOm[31]). 0 = Read: pin is LOW and/or the corresponding bit in the MASK register is 1; write: clear output bit if the corresponding bit in the MASK register is 0. 1 = Read: pin is HIGH and the corresponding bit in the MASK register is 0; write: set output bit if the corresponding bit in the MASK register is 0."]
#[inline]
pub fn mportp14(&self) -> MPORTP14R {
let bits = {
const MASK: bool = true;
const OFFSET: u8 = 14;
((self.bits >> OFFSET) & MASK as u32) != 0
};
MPORTP14R { bits }
}
#[doc = "Bit 15 - Masked port register (bit 0 = GPIOm[0], bit 1 = GPIOm[1], ..., bit 31 = GPIOm[31]). 0 = Read: pin is LOW and/or the corresponding bit in the MASK register is 1; write: clear output bit if the corresponding bit in the MASK register is 0. 1 = Read: pin is HIGH and the corresponding bit in the MASK register is 0; write: set output bit if the corresponding bit in the MASK register is 0."]
#[inline]
pub fn mportp15(&self) -> MPORTP15R {
let bits = {
const MASK: bool = true;
const OFFSET: u8 = 15;
((self.bits >> OFFSET) & MASK as u32) != 0
};
MPORTP15R { bits }
}
#[doc = "Bit 16 - Masked port register (bit 0 = GPIOm[0], bit 1 = GPIOm[1], ..., bit 31 = GPIOm[31]). 0 = Read: pin is LOW and/or the corresponding bit in the MASK register is 1; write: clear output bit if the corresponding bit in the MASK register is 0. 1 = Read: pin is HIGH and the corresponding bit in the MASK register is 0; write: set output bit if the corresponding bit in the MASK register is 0."]
#[inline]
pub fn mportp16(&self) -> MPORTP16R {
let bits = {
const MASK: bool = true;
const OFFSET: u8 = 16;
((self.bits >> OFFSET) & MASK as u32) != 0
};
MPORTP16R { bits }
}
#[doc = "Bit 17 - Masked port register (bit 0 = GPIOm[0], bit 1 = GPIOm[1], ..., bit 31 = GPIOm[31]). 0 = Read: pin is LOW and/or the corresponding bit in the MASK register is 1; write: clear output bit if the corresponding bit in the MASK register is 0. 1 = Read: pin is HIGH and the corresponding bit in the MASK register is 0; write: set output bit if the corresponding bit in the MASK register is 0."]
#[inline]
pub fn mportp17(&self) -> MPORTP17R {
let bits = {
const MASK: bool = true;
const OFFSET: u8 = 17;
((self.bits >> OFFSET) & MASK as u32) != 0
};
MPORTP17R { bits }
}
#[doc = "Bit 18 - Masked port register (bit 0 = GPIOm[0], bit 1 = GPIOm[1], ..., bit 31 = GPIOm[31]). 0 = Read: pin is LOW and/or the corresponding bit in the MASK register is 1; write: clear output bit if the corresponding bit in the MASK register is 0. 1 = Read: pin is HIGH and the corresponding bit in the MASK register is 0; write: set output bit if the corresponding bit in the MASK register is 0."]
#[inline]
pub fn mportp18(&self) -> MPORTP18R {
let bits = {
const MASK: bool = true;
const OFFSET: u8 = 18;
((self.bits >> OFFSET) & MASK as u32) != 0
};
MPORTP18R { bits }
}
#[doc = "Bit 19 - Masked port register (bit 0 = GPIOm[0], bit 1 = GPIOm[1], ..., bit 31 = GPIOm[31]). 0 = Read: pin is LOW and/or the corresponding bit in the MASK register is 1; write: clear output bit if the corresponding bit in the MASK register is 0. 1 = Read: pin is HIGH and the corresponding bit in the MASK register is 0; write: set output bit if the corresponding bit in the MASK register is 0."]
#[inline]
pub fn mportp19(&self) -> MPORTP19R {
let bits = {
const MASK: bool = true;
const OFFSET: u8 = 19;
((self.bits >> OFFSET) & MASK as u32) != 0
};
MPORTP19R { bits }
}
#[doc = "Bit 20 - Masked port register (bit 0 = GPIOm[0], bit 1 = GPIOm[1], ..., bit 31 = GPIOm[31]). 0 = Read: pin is LOW and/or the corresponding bit in the MASK register is 1; write: clear output bit if the corresponding bit in the MASK register is 0. 1 = Read: pin is HIGH and the corresponding bit in the MASK register is 0; write: set output bit if the corresponding bit in the MASK register is 0."]
#[inline]
pub fn mportp20(&self) -> MPORTP20R {
let bits = {
const MASK: bool = true;
const OFFSET: u8 = 20;
((self.bits >> OFFSET) & MASK as u32) != 0
};
MPORTP20R { bits }
}
#[doc = "Bit 21 - Masked port register (bit 0 = GPIOm[0], bit 1 = GPIOm[1], ..., bit 31 = GPIOm[31]). 0 = Read: pin is LOW and/or the corresponding bit in the MASK register is 1; write: clear output bit if the corresponding bit in the MASK register is 0. 1 = Read: pin is HIGH and the corresponding bit in the MASK register is 0; write: set output bit if the corresponding bit in the MASK register is 0."]
#[inline]
pub fn mportp21(&self) -> MPORTP21R {
let bits = {
const MASK: bool = true;
const OFFSET: u8 = 21;
((self.bits >> OFFSET) & MASK as u32) != 0
};
MPORTP21R { bits }
}
#[doc = "Bit 22 - Masked port register (bit 0 = GPIOm[0], bit 1 = GPIOm[1], ..., bit 31 = GPIOm[31]). 0 = Read: pin is LOW and/or the corresponding bit in the MASK register is 1; write: clear output bit if the corresponding bit in the MASK register is 0. 1 = Read: pin is HIGH and the corresponding bit in the MASK register is 0; write: set output bit if the corresponding bit in the MASK register is 0."]
#[inline]
pub fn mportp22(&self) -> MPORTP22R {
let bits = {
const MASK: bool = true;
const OFFSET: u8 = 22;
((self.bits >> OFFSET) & MASK as u32) != 0
};
MPORTP22R { bits }
}
#[doc = "Bit 23 - Masked port register (bit 0 = GPIOm[0], bit 1 = GPIOm[1], ..., bit 31 = GPIOm[31]). 0 = Read: pin is LOW and/or the corresponding bit in the MASK register is 1; write: clear output bit if the corresponding bit in the MASK register is 0. 1 = Read: pin is HIGH and the corresponding bit in the MASK register is 0; write: set output bit if the corresponding bit in the MASK register is 0."]
#[inline]
pub fn mportp23(&self) -> MPORTP23R {
let bits = {
const MASK: bool = true;
const OFFSET: u8 = 23;
((self.bits >> OFFSET) & MASK as u32) != 0
};
MPORTP23R { bits }
}
#[doc = "Bit 24 - Masked port register (bit 0 = GPIOm[0], bit 1 = GPIOm[1], ..., bit 31 = GPIOm[31]). 0 = Read: pin is LOW and/or the corresponding bit in the MASK register is 1; write: clear output bit if the corresponding bit in the MASK register is 0. 1 = Read: pin is HIGH and the corresponding bit in the MASK register is 0; write: set output bit if the corresponding bit in the MASK register is 0."]
#[inline]
pub fn mportp24(&self) -> MPORTP24R {
let bits = {
const MASK: bool = true;
const OFFSET: u8 = 24;
((self.bits >> OFFSET) & MASK as u32) != 0
};
MPORTP24R { bits }
}
#[doc = "Bit 25 - Masked port register (bit 0 = GPIOm[0], bit 1 = GPIOm[1], ..., bit 31 = GPIOm[31]). 0 = Read: pin is LOW and/or the corresponding bit in the MASK register is 1; write: clear output bit if the corresponding bit in the MASK register is 0. 1 = Read: pin is HIGH and the corresponding bit in the MASK register is 0; write: set output bit if the corresponding bit in the MASK register is 0."]
#[inline]
pub fn mportp25(&self) -> MPORTP25R {
let bits = {
const MASK: bool = true;
const OFFSET: u8 = 25;
((self.bits >> OFFSET) & MASK as u32) != 0
};
MPORTP25R { bits }
}
#[doc = "Bit 26 - Masked port register (bit 0 = GPIOm[0], bit 1 = GPIOm[1], ..., bit 31 = GPIOm[31]). 0 = Read: pin is LOW and/or the corresponding bit in the MASK register is 1; write: clear output bit if the corresponding bit in the MASK register is 0. 1 = Read: pin is HIGH and the corresponding bit in the MASK register is 0; write: set output bit if the corresponding bit in the MASK register is 0."]
#[inline]
pub fn mportp26(&self) -> MPORTP26R {
let bits = {
const MASK: bool = true;
const OFFSET: u8 = 26;
((self.bits >> OFFSET) & MASK as u32) != 0
};
MPORTP26R { bits }
}
#[doc = "Bit 27 - Masked port register (bit 0 = GPIOm[0], bit 1 = GPIOm[1], ..., bit 31 = GPIOm[31]). 0 = Read: pin is LOW and/or the corresponding bit in the MASK register is 1; write: clear output bit if the corresponding bit in the MASK register is 0. 1 = Read: pin is HIGH and the corresponding bit in the MASK register is 0; write: set output bit if the corresponding bit in the MASK register is 0."]
#[inline]
pub fn mportp27(&self) -> MPORTP27R {
let bits = {
const MASK: bool = true;
const OFFSET: u8 = 27;
((self.bits >> OFFSET) & MASK as u32) != 0
};
MPORTP27R { bits }
}
#[doc = "Bit 28 - Masked port register (bit 0 = GPIOm[0], bit 1 = GPIOm[1], ..., bit 31 = GPIOm[31]). 0 = Read: pin is LOW and/or the corresponding bit in the MASK register is 1; write: clear output bit if the corresponding bit in the MASK register is 0. 1 = Read: pin is HIGH and the corresponding bit in the MASK register is 0; write: set output bit if the corresponding bit in the MASK register is 0."]
#[inline]
pub fn mportp28(&self) -> MPORTP28R {
let bits = {
const MASK: bool = true;
const OFFSET: u8 = 28;
((self.bits >> OFFSET) & MASK as u32) != 0
};
MPORTP28R { bits }
}
#[doc = "Bit 29 - Masked port register (bit 0 = GPIOm[0], bit 1 = GPIOm[1], ..., bit 31 = GPIOm[31]). 0 = Read: pin is LOW and/or the corresponding bit in the MASK register is 1; write: clear output bit if the corresponding bit in the MASK register is 0. 1 = Read: pin is HIGH and the corresponding bit in the MASK register is 0; write: set output bit if the corresponding bit in the MASK register is 0."]
#[inline]
pub fn mportp29(&self) -> MPORTP29R {
let bits = {
const MASK: bool = true;
const OFFSET: u8 = 29;
((self.bits >> OFFSET) & MASK as u32) != 0
};
MPORTP29R { bits }
}
#[doc = "Bit 30 - Masked port register (bit 0 = GPIOm[0], bit 1 = GPIOm[1], ..., bit 31 = GPIOm[31]). 0 = Read: pin is LOW and/or the corresponding bit in the MASK register is 1; write: clear output bit if the corresponding bit in the MASK register is 0. 1 = Read: pin is HIGH and the corresponding bit in the MASK register is 0; write: set output bit if the corresponding bit in the MASK register is 0."]
#[inline]
pub fn mportp30(&self) -> MPORTP30R {
let bits = {
const MASK: bool = true;
const OFFSET: u8 = 30;
((self.bits >> OFFSET) & MASK as u32) != 0
};
MPORTP30R { bits }
}
#[doc = "Bit 31 - Masked port register (bit 0 = GPIOm[0], bit 1 = GPIOm[1], ..., bit 31 = GPIOm[31]). 0 = Read: pin is LOW and/or the corresponding bit in the MASK register is 1; write: clear output bit if the corresponding bit in the MASK register is 0. 1 = Read: pin is HIGH and the corresponding bit in the MASK register is 0; write: set output bit if the corresponding bit in the MASK register is 0."]
#[inline]
pub fn mportp31(&self) -> MPORTP31R {
let bits = {
const MASK: bool = true;
const OFFSET: u8 = 31;
((self.bits >> OFFSET) & MASK as u32) != 0
};
MPORTP31R { bits }
}
}
impl W {
#[doc = r" Reset value of the register"]
#[inline]
pub fn reset_value() -> W {
W { bits: 0 }
}
#[doc = r" Writes raw bits to the register"]
#[inline]
pub unsafe fn bits(&mut self, bits: u32) -> &mut Self {
self.bits = bits;
self
}
#[doc = "Bit 0 - Masked port register (bit 0 = GPIOm[0], bit 1 = GPIOm[1], ..., bit 31 = GPIOm[31]). 0 = Read: pin is LOW and/or the corresponding bit in the MASK register is 1; write: clear output bit if the corresponding bit in the MASK register is 0. 1 = Read: pin is HIGH and the corresponding bit in the MASK register is 0; write: set output bit if the corresponding bit in the MASK register is 0."]
#[inline]
pub fn mportp0(&mut self) -> _MPORTP0W {
_MPORTP0W { w: self }
}
#[doc = "Bit 1 - Masked port register (bit 0 = GPIOm[0], bit 1 = GPIOm[1], ..., bit 31 = GPIOm[31]). 0 = Read: pin is LOW and/or the corresponding bit in the MASK register is 1; write: clear output bit if the corresponding bit in the MASK register is 0. 1 = Read: pin is HIGH and the corresponding bit in the MASK register is 0; write: set output bit if the corresponding bit in the MASK register is 0."]
#[inline]
pub fn mportp1(&mut self) -> _MPORTP1W {
_MPORTP1W { w: self }
}
#[doc = "Bit 2 - Masked port register (bit 0 = GPIOm[0], bit 1 = GPIOm[1], ..., bit 31 = GPIOm[31]). 0 = Read: pin is LOW and/or the corresponding bit in the MASK register is 1; write: clear output bit if the corresponding bit in the MASK register is 0. 1 = Read: pin is HIGH and the corresponding bit in the MASK register is 0; write: set output bit if the corresponding bit in the MASK register is 0."]
#[inline]
pub fn mportp2(&mut self) -> _MPORTP2W {
_MPORTP2W { w: self }
}
#[doc = "Bit 3 - Masked port register (bit 0 = GPIOm[0], bit 1 = GPIOm[1], ..., bit 31 = GPIOm[31]). 0 = Read: pin is LOW and/or the corresponding bit in the MASK register is 1; write: clear output bit if the corresponding bit in the MASK register is 0. 1 = Read: pin is HIGH and the corresponding bit in the MASK register is 0; write: set output bit if the corresponding bit in the MASK register is 0."]
#[inline]
pub fn mportp3(&mut self) -> _MPORTP3W {
_MPORTP3W { w: self }
}
#[doc = "Bit 4 - Masked port register (bit 0 = GPIOm[0], bit 1 = GPIOm[1], ..., bit 31 = GPIOm[31]). 0 = Read: pin is LOW and/or the corresponding bit in the MASK register is 1; write: clear output bit if the corresponding bit in the MASK register is 0. 1 = Read: pin is HIGH and the corresponding bit in the MASK register is 0; write: set output bit if the corresponding bit in the MASK register is 0."]
#[inline]
pub fn mportp4(&mut self) -> _MPORTP4W {
_MPORTP4W { w: self }
}
#[doc = "Bit 5 - Masked port register (bit 0 = GPIOm[0], bit 1 = GPIOm[1], ..., bit 31 = GPIOm[31]). 0 = Read: pin is LOW and/or the corresponding bit in the MASK register is 1; write: clear output bit if the corresponding bit in the MASK register is 0. 1 = Read: pin is HIGH and the corresponding bit in the MASK register is 0; write: set output bit if the corresponding bit in the MASK register is 0."]
#[inline]
pub fn mportp5(&mut self) -> _MPORTP5W {
_MPORTP5W { w: self }
}
#[doc = "Bit 6 - Masked port register (bit 0 = GPIOm[0], bit 1 = GPIOm[1], ..., bit 31 = GPIOm[31]). 0 = Read: pin is LOW and/or the corresponding bit in the MASK register is 1; write: clear output bit if the corresponding bit in the MASK register is 0. 1 = Read: pin is HIGH and the corresponding bit in the MASK register is 0; write: set output bit if the corresponding bit in the MASK register is 0."]
#[inline]
pub fn mportp6(&mut self) -> _MPORTP6W {
_MPORTP6W { w: self }
}
#[doc = "Bit 7 - Masked port register (bit 0 = GPIOm[0], bit 1 = GPIOm[1], ..., bit 31 = GPIOm[31]). 0 = Read: pin is LOW and/or the corresponding bit in the MASK register is 1; write: clear output bit if the corresponding bit in the MASK register is 0. 1 = Read: pin is HIGH and the corresponding bit in the MASK register is 0; write: set output bit if the corresponding bit in the MASK register is 0."]
#[inline]
pub fn mportp7(&mut self) -> _MPORTP7W {
_MPORTP7W { w: self }
}
#[doc = "Bit 8 - Masked port register (bit 0 = GPIOm[0], bit 1 = GPIOm[1], ..., bit 31 = GPIOm[31]). 0 = Read: pin is LOW and/or the corresponding bit in the MASK register is 1; write: clear output bit if the corresponding bit in the MASK register is 0. 1 = Read: pin is HIGH and the corresponding bit in the MASK register is 0; write: set output bit if the corresponding bit in the MASK register is 0."]
#[inline]
pub fn mportp8(&mut self) -> _MPORTP8W {
_MPORTP8W { w: self }
}
#[doc = "Bit 9 - Masked port register (bit 0 = GPIOm[0], bit 1 = GPIOm[1], ..., bit 31 = GPIOm[31]). 0 = Read: pin is LOW and/or the corresponding bit in the MASK register is 1; write: clear output bit if the corresponding bit in the MASK register is 0. 1 = Read: pin is HIGH and the corresponding bit in the MASK register is 0; write: set output bit if the corresponding bit in the MASK register is 0."]
#[inline]
pub fn mportp9(&mut self) -> _MPORTP9W {
_MPORTP9W { w: self }
}
#[doc = "Bit 10 - Masked port register (bit 0 = GPIOm[0], bit 1 = GPIOm[1], ..., bit 31 = GPIOm[31]). 0 = Read: pin is LOW and/or the corresponding bit in the MASK register is 1; write: clear output bit if the corresponding bit in the MASK register is 0. 1 = Read: pin is HIGH and the corresponding bit in the MASK register is 0; write: set output bit if the corresponding bit in the MASK register is 0."]
#[inline]
pub fn mportp10(&mut self) -> _MPORTP10W {
_MPORTP10W { w: self }
}
#[doc = "Bit 11 - Masked port register (bit 0 = GPIOm[0], bit 1 = GPIOm[1], ..., bit 31 = GPIOm[31]). 0 = Read: pin is LOW and/or the corresponding bit in the MASK register is 1; write: clear output bit if the corresponding bit in the MASK register is 0. 1 = Read: pin is HIGH and the corresponding bit in the MASK register is 0; write: set output bit if the corresponding bit in the MASK register is 0."]
#[inline]
pub fn mportp11(&mut self) -> _MPORTP11W {
_MPORTP11W { w: self }
}
#[doc = "Bit 12 - Masked port register (bit 0 = GPIOm[0], bit 1 = GPIOm[1], ..., bit 31 = GPIOm[31]). 0 = Read: pin is LOW and/or the corresponding bit in the MASK register is 1; write: clear output bit if the corresponding bit in the MASK register is 0. 1 = Read: pin is HIGH and the corresponding bit in the MASK register is 0; write: set output bit if the corresponding bit in the MASK register is 0."]
#[inline]
pub fn mportp12(&mut self) -> _MPORTP12W {
_MPORTP12W { w: self }
}
#[doc = "Bit 13 - Masked port register (bit 0 = GPIOm[0], bit 1 = GPIOm[1], ..., bit 31 = GPIOm[31]). 0 = Read: pin is LOW and/or the corresponding bit in the MASK register is 1; write: clear output bit if the corresponding bit in the MASK register is 0. 1 = Read: pin is HIGH and the corresponding bit in the MASK register is 0; write: set output bit if the corresponding bit in the MASK register is 0."]
#[inline]
pub fn mportp13(&mut self) -> _MPORTP13W {
_MPORTP13W { w: self }
}
#[doc = "Bit 14 - Masked port register (bit 0 = GPIOm[0], bit 1 = GPIOm[1], ..., bit 31 = GPIOm[31]). 0 = Read: pin is LOW and/or the corresponding bit in the MASK register is 1; write: clear output bit if the corresponding bit in the MASK register is 0. 1 = Read: pin is HIGH and the corresponding bit in the MASK register is 0; write: set output bit if the corresponding bit in the MASK register is 0."]
#[inline]
pub fn mportp14(&mut self) -> _MPORTP14W {
_MPORTP14W { w: self }
}
#[doc = "Bit 15 - Masked port register (bit 0 = GPIOm[0], bit 1 = GPIOm[1], ..., bit 31 = GPIOm[31]). 0 = Read: pin is LOW and/or the corresponding bit in the MASK register is 1; write: clear output bit if the corresponding bit in the MASK register is 0. 1 = Read: pin is HIGH and the corresponding bit in the MASK register is 0; write: set output bit if the corresponding bit in the MASK register is 0."]
#[inline]
pub fn mportp15(&mut self) -> _MPORTP15W {
_MPORTP15W { w: self }
}
#[doc = "Bit 16 - Masked port register (bit 0 = GPIOm[0], bit 1 = GPIOm[1], ..., bit 31 = GPIOm[31]). 0 = Read: pin is LOW and/or the corresponding bit in the MASK register is 1; write: clear output bit if the corresponding bit in the MASK register is 0. 1 = Read: pin is HIGH and the corresponding bit in the MASK register is 0; write: set output bit if the corresponding bit in the MASK register is 0."]
#[inline]
pub fn mportp16(&mut self) -> _MPORTP16W {
_MPORTP16W { w: self }
}
#[doc = "Bit 17 - Masked port register (bit 0 = GPIOm[0], bit 1 = GPIOm[1], ..., bit 31 = GPIOm[31]). 0 = Read: pin is LOW and/or the corresponding bit in the MASK register is 1; write: clear output bit if the corresponding bit in the MASK register is 0. 1 = Read: pin is HIGH and the corresponding bit in the MASK register is 0; write: set output bit if the corresponding bit in the MASK register is 0."]
#[inline]
pub fn mportp17(&mut self) -> _MPORTP17W {
_MPORTP17W { w: self }
}
#[doc = "Bit 18 - Masked port register (bit 0 = GPIOm[0], bit 1 = GPIOm[1], ..., bit 31 = GPIOm[31]). 0 = Read: pin is LOW and/or the corresponding bit in the MASK register is 1; write: clear output bit if the corresponding bit in the MASK register is 0. 1 = Read: pin is HIGH and the corresponding bit in the MASK register is 0; write: set output bit if the corresponding bit in the MASK register is 0."]
#[inline]
pub fn mportp18(&mut self) -> _MPORTP18W {
_MPORTP18W { w: self }
}
#[doc = "Bit 19 - Masked port register (bit 0 = GPIOm[0], bit 1 = GPIOm[1], ..., bit 31 = GPIOm[31]). 0 = Read: pin is LOW and/or the corresponding bit in the MASK register is 1; write: clear output bit if the corresponding bit in the MASK register is 0. 1 = Read: pin is HIGH and the corresponding bit in the MASK register is 0; write: set output bit if the corresponding bit in the MASK register is 0."]
#[inline]
pub fn mportp19(&mut self) -> _MPORTP19W {
_MPORTP19W { w: self }
}
#[doc = "Bit 20 - Masked port register (bit 0 = GPIOm[0], bit 1 = GPIOm[1], ..., bit 31 = GPIOm[31]). 0 = Read: pin is LOW and/or the corresponding bit in the MASK register is 1; write: clear output bit if the corresponding bit in the MASK register is 0. 1 = Read: pin is HIGH and the corresponding bit in the MASK register is 0; write: set output bit if the corresponding bit in the MASK register is 0."]
#[inline]
pub fn mportp20(&mut self) -> _MPORTP20W {
_MPORTP20W { w: self }
}
#[doc = "Bit 21 - Masked port register (bit 0 = GPIOm[0], bit 1 = GPIOm[1], ..., bit 31 = GPIOm[31]). 0 = Read: pin is LOW and/or the corresponding bit in the MASK register is 1; write: clear output bit if the corresponding bit in the MASK register is 0. 1 = Read: pin is HIGH and the corresponding bit in the MASK register is 0; write: set output bit if the corresponding bit in the MASK register is 0."]
#[inline]
pub fn mportp21(&mut self) -> _MPORTP21W {
_MPORTP21W { w: self }
}
#[doc = "Bit 22 - Masked port register (bit 0 = GPIOm[0], bit 1 = GPIOm[1], ..., bit 31 = GPIOm[31]). 0 = Read: pin is LOW and/or the corresponding bit in the MASK register is 1; write: clear output bit if the corresponding bit in the MASK register is 0. 1 = Read: pin is HIGH and the corresponding bit in the MASK register is 0; write: set output bit if the corresponding bit in the MASK register is 0."]
#[inline]
pub fn mportp22(&mut self) -> _MPORTP22W {
_MPORTP22W { w: self }
}
#[doc = "Bit 23 - Masked port register (bit 0 = GPIOm[0], bit 1 = GPIOm[1], ..., bit 31 = GPIOm[31]). 0 = Read: pin is LOW and/or the corresponding bit in the MASK register is 1; write: clear output bit if the corresponding bit in the MASK register is 0. 1 = Read: pin is HIGH and the corresponding bit in the MASK register is 0; write: set output bit if the corresponding bit in the MASK register is 0."]
#[inline]
pub fn mportp23(&mut self) -> _MPORTP23W {
_MPORTP23W { w: self }
}
#[doc = "Bit 24 - Masked port register (bit 0 = GPIOm[0], bit 1 = GPIOm[1], ..., bit 31 = GPIOm[31]). 0 = Read: pin is LOW and/or the corresponding bit in the MASK register is 1; write: clear output bit if the corresponding bit in the MASK register is 0. 1 = Read: pin is HIGH and the corresponding bit in the MASK register is 0; write: set output bit if the corresponding bit in the MASK register is 0."]
#[inline]
pub fn mportp24(&mut self) -> _MPORTP24W {
_MPORTP24W { w: self }
}
#[doc = "Bit 25 - Masked port register (bit 0 = GPIOm[0], bit 1 = GPIOm[1], ..., bit 31 = GPIOm[31]). 0 = Read: pin is LOW and/or the corresponding bit in the MASK register is 1; write: clear output bit if the corresponding bit in the MASK register is 0. 1 = Read: pin is HIGH and the corresponding bit in the MASK register is 0; write: set output bit if the corresponding bit in the MASK register is 0."]
#[inline]
pub fn mportp25(&mut self) -> _MPORTP25W {
_MPORTP25W { w: self }
}
#[doc = "Bit 26 - Masked port register (bit 0 = GPIOm[0], bit 1 = GPIOm[1], ..., bit 31 = GPIOm[31]). 0 = Read: pin is LOW and/or the corresponding bit in the MASK register is 1; write: clear output bit if the corresponding bit in the MASK register is 0. 1 = Read: pin is HIGH and the corresponding bit in the MASK register is 0; write: set output bit if the corresponding bit in the MASK register is 0."]
#[inline]
pub fn mportp26(&mut self) -> _MPORTP26W {
_MPORTP26W { w: self }
}
#[doc = "Bit 27 - Masked port register (bit 0 = GPIOm[0], bit 1 = GPIOm[1], ..., bit 31 = GPIOm[31]). 0 = Read: pin is LOW and/or the corresponding bit in the MASK register is 1; write: clear output bit if the corresponding bit in the MASK register is 0. 1 = Read: pin is HIGH and the corresponding bit in the MASK register is 0; write: set output bit if the corresponding bit in the MASK register is 0."]
#[inline]
pub fn mportp27(&mut self) -> _MPORTP27W {
_MPORTP27W { w: self }
}
#[doc = "Bit 28 - Masked port register (bit 0 = GPIOm[0], bit 1 = GPIOm[1], ..., bit 31 = GPIOm[31]). 0 = Read: pin is LOW and/or the corresponding bit in the MASK register is 1; write: clear output bit if the corresponding bit in the MASK register is 0. 1 = Read: pin is HIGH and the corresponding bit in the MASK register is 0; write: set output bit if the corresponding bit in the MASK register is 0."]
#[inline]
pub fn mportp28(&mut self) -> _MPORTP28W {
_MPORTP28W { w: self }
}
#[doc = "Bit 29 - Masked port register (bit 0 = GPIOm[0], bit 1 = GPIOm[1], ..., bit 31 = GPIOm[31]). 0 = Read: pin is LOW and/or the corresponding bit in the MASK register is 1; write: clear output bit if the corresponding bit in the MASK register is 0. 1 = Read: pin is HIGH and the corresponding bit in the MASK register is 0; write: set output bit if the corresponding bit in the MASK register is 0."]
#[inline]
pub fn mportp29(&mut self) -> _MPORTP29W {
_MPORTP29W { w: self }
}
#[doc = "Bit 30 - Masked port register (bit 0 = GPIOm[0], bit 1 = GPIOm[1], ..., bit 31 = GPIOm[31]). 0 = Read: pin is LOW and/or the corresponding bit in the MASK register is 1; write: clear output bit if the corresponding bit in the MASK register is 0. 1 = Read: pin is HIGH and the corresponding bit in the MASK register is 0; write: set output bit if the corresponding bit in the MASK register is 0."]
#[inline]
pub fn mportp30(&mut self) -> _MPORTP30W {
_MPORTP30W { w: self }
}
#[doc = "Bit 31 - Masked port register (bit 0 = GPIOm[0], bit 1 = GPIOm[1], ..., bit 31 = GPIOm[31]). 0 = Read: pin is LOW and/or the corresponding bit in the MASK register is 1; write: clear output bit if the corresponding bit in the MASK register is 0. 1 = Read: pin is HIGH and the corresponding bit in the MASK register is 0; write: set output bit if the corresponding bit in the MASK register is 0."]
#[inline]
pub fn mportp31(&mut self) -> _MPORTP31W {
_MPORTP31W { w: self }
}
}