lean-ctx 3.8.13

//! Shell allowlist with AST-based command parsing.
//!
//! Security model (Information Bottleneck principle):
//! - When allowlist is set: ALL segments of a compound command must be allowed (deny-by-default)
//! - When empty: all commands pass (backwards-compatible blocklist-only mode)
//! - Dangerous patterns (subshells, eval, backticks) are blocked in restricted mode

mod mode;
#[cfg(test)]
mod tests;

pub use mode::ShellSecurity;

/// Checks whether a command may run, honouring the active [`ShellSecurity`] mode
/// (GL #788). This is the single chokepoint shared by MCP `ctx_shell` and the
/// CLI shell entrypoints, so the mode applies consistently:
///
/// - [`ShellSecurity::Off`] → always `Ok` (gating skipped; compression intact).
/// - [`ShellSecurity::Warn`] → run the checks, log any violation, return `Ok`.
/// - [`ShellSecurity::Enforce`] → block on violation (the secure default).
pub fn check_shell_allowlist(command: &str) -> Result<(), String> {
    match ShellSecurity::resolve() {
        ShellSecurity::Off => Ok(()),
        ShellSecurity::Warn => {
            if let Err(msg) = enforce_shell_allowlist(command) {
                tracing::warn!(
                    target: "shell_security",
                    "warn-only: would block ({})",
                    msg.lines().next().unwrap_or("blocked")
                );
            }
            Ok(())
        }
        ShellSecurity::Enforce => enforce_shell_allowlist(command),
    }
}

/// Allowlist + dangerous-pattern enforcement, evaluated as if in `enforce` mode.
/// [`check_shell_allowlist`] decides whether a violation blocks, warns, or is
/// skipped based on the active [`ShellSecurity`] mode.
///
/// When the allowlist is empty, all commands pass (blocklist-only mode).
/// When non-empty, EVERY command segment in the pipeline must match.
fn enforce_shell_allowlist(command: &str) -> Result<(), String> {
    let normalized = normalize_line_continuations(command);
    let cmd = normalized.as_str();

    if has_dangerous_patterns(cmd) {
        return Err(format!(
            "[BLOCKED — DO NOT RETRY] Command uses eval or $()/ backticks at command position, \
             which is blocked regardless of allowlist. \
             This is a permanent security restriction, not a transient error.\n\
             Command: {command}"
        ));
    }

    let strict = crate::core::config::Config::load().shell_strict_mode;
    check_substitution_in_args(cmd, strict)?;
    check_pipe_to_bare_interpreter(cmd, strict)?;

    let allowlist = effective_allowlist();
    if allowlist.is_empty() {
        check_unconditional_blocked_only(cmd)?;
        return Ok(());
    }
    check_all_segments(cmd, &allowlist)
}

/// Normalize the command string: remove backslash-newline continuations and
/// replace Unicode line separators (U+2028, U+2029) with newlines.
fn normalize_line_continuations(command: &str) -> String {
    command
        .replace("\\\r\n", "")
        .replace("\\\n", "")
        .replace(['\u{2028}', '\u{2029}'], "\n")
}

/// $(), backticks, <() in arguments: warn by default, **block** when
/// `shell_strict_mode = true` (GH #391 — the strict knob previously only
/// changed the log line and never actually blocked).
fn check_substitution_in_args(command: &str, strict: bool) -> Result<(), String> {
    if has_expanding_substitution_in_args(command) {
        if strict {
            tracing::warn!(
                "[SECURITY] Command substitution in arguments blocked (shell_strict_mode=true): {command}"
            );
            return Err(format!(
                "[BLOCKED — DO NOT RETRY] Command substitution ($(), backticks, <()/>()) in \
                 arguments is blocked because shell_strict_mode = true. \
                 This is a permanent security restriction.\n\
                 Command: {command}"
            ));
        }
        tracing::warn!(
            "[SECURITY] Command substitution in arguments detected (warn-only, set shell_strict_mode=true to block): {command}"
        );
    }
    Ok(())
}

/// Check for $(), backticks, <(, >( in arguments wherever the shell would
/// expand them — i.e. unquoted OR inside double quotes (single quotes inhibit
/// expansion). `git commit -m "$(cat f)"` expands; `grep '$(x)' f` does not.
fn has_expanding_substitution_in_args(command: &str) -> bool {
    let bytes = command.as_bytes();
    let len = bytes.len();
    let mut i = 0;
    let mut in_single_quote = false;
    let mut seen_space_after_cmd = false;

    while i < len {
        let ch = bytes[i];
        if in_single_quote {
            if ch == b'\'' {
                in_single_quote = false;
            }
            i += 1;
            continue;
        }
        match ch {
            b'\'' => {
                in_single_quote = true;
                i += 1;
            }
            b' ' | b'\t' if !seen_space_after_cmd => {
                seen_space_after_cmd = true;
                i += 1;
            }
            _ if !seen_space_after_cmd => {
                i += 1;
            }
            _ => {
                if ch == b'$' && i + 1 < len && bytes[i + 1] == b'(' {
                    return true;
                }
                if ch == b'`' {
                    return true;
                }
                if (ch == b'<' || ch == b'>') && i + 1 < len && bytes[i + 1] == b'(' {
                    return true;
                }
                i += 1;
            }
        }
    }
    false
}

/// Piping into a bare interpreter (no script file): warn by default, **block**
/// when `shell_strict_mode = true` (GH #391).
fn check_pipe_to_bare_interpreter(command: &str, strict: bool) -> Result<(), String> {
    let segments = split_on_operators(command);
    let pipe_indices: Vec<usize> = {
        let mut indices = Vec::new();
        let bytes = command.as_bytes();
        let len = bytes.len();
        let mut j = 0;
        let mut in_sq = false;
        let mut in_dq = false;
        while j < len {
            if in_sq {
                if bytes[j] == b'\'' {
                    in_sq = false;
                }
                j += 1;
                continue;
            }
            if in_dq {
                if bytes[j] == b'"' && (j == 0 || bytes[j - 1] != b'\\') {
                    in_dq = false;
                }
                j += 1;
                continue;
            }
            match bytes[j] {
                b'\'' => {
                    in_sq = true;
                    j += 1;
                }
                b'"' => {
                    in_dq = true;
                    j += 1;
                }
                b'|' if j + 1 < len && bytes[j + 1] != b'|' => {
                    indices.push(j);
                    j += 1;
                }
                _ => {
                    j += 1;
                }
            }
        }
        indices
    };
    let _ = pipe_indices;

    for (idx, seg) in segments.iter().enumerate() {
        if idx == 0 {
            continue;
        }
        if is_bare_interpreter_stdin(seg) {
            let base = extract_base_from_segment(seg);
            if strict {
                tracing::warn!(
                    "[SECURITY] Pipe to bare interpreter '{base}' blocked (shell_strict_mode=true)"
                );
                return Err(format!(
                    "[BLOCKED — DO NOT RETRY] Piping into bare interpreter '{base}' is blocked \
                     because shell_strict_mode = true. Run a script file instead.\n\
                     Command: {command}"
                ));
            }
            tracing::warn!("[SECURITY] Pipe to bare interpreter '{base}' detected (warn-only)");
        }
    }
    Ok(())
}

/// For empty allowlists: still enforce UNCONDITIONAL_BLOCKED commands.
fn check_unconditional_blocked_only(command: &str) -> Result<(), String> {
    let segments = extract_all_commands(command);
    for seg in &segments {
        let base = extract_base_from_segment(seg);
        if !base.is_empty() && UNCONDITIONAL_BLOCKED.contains(&base.as_str()) {
            return Err(format!(
                "[BLOCKED — DO NOT RETRY] '{base}' is unconditionally blocked \
                 regardless of allowlist configuration.\n\
                 Command: {command}"
            ));
        }
        check_inline_env_block(seg)?;
        check_interpreter_eval_only(seg)?;
        check_dangerous_flags(seg)?;
    }
    Ok(())
}

/// Tokenize a shell command segment respecting single/double quotes and backslash escapes.
/// Returns tokens with outer quotes stripped, matching how the shell would parse them.
/// E.g. `git -C "Program Files" status` → `["git", "-C", "Program Files", "status"]`
pub fn shell_tokenize(input: &str) -> Vec<String> {
    let mut tokens = Vec::new();
    let mut current = String::new();
    let mut chars = input.chars().peekable();
    let mut in_single = false;
    let mut in_double = false;

    while let Some(c) = chars.next() {
        match c {
            '\'' if !in_double => in_single = !in_single,
            '"' if !in_single => in_double = !in_double,
            '\\' if !in_single => {
                if let Some(next) = chars.next() {
                    current.push(next);
                }
            }
            c if c.is_whitespace() && !in_single && !in_double => {
                if !current.is_empty() {
                    tokens.push(std::mem::take(&mut current));
                }
            }
            _ => current.push(c),
        }
    }
    if !current.is_empty() {
        tokens.push(current);
    }
    tokens
}

/// Returns the byte length of the first shell token in `input`, respecting quotes.
/// Used by `skip_env_assignments` to advance past env assignments with quoted values
/// like `FOO="bar baz"`.
fn quote_aware_token_end(input: &str) -> usize {
    let bytes = input.as_bytes();
    let len = bytes.len();
    let mut i = 0;
    let mut in_single = false;
    let mut in_double = false;

    while i < len {
        let ch = bytes[i];
        match ch {
            b'\'' if !in_double => {
                in_single = !in_single;
                i += 1;
            }
            b'"' if !in_single => {
                in_double = !in_double;
                i += 1;
            }
            b'\\' if !in_single => {
                i = (i + 2).min(len);
            }
            b if b.is_ascii_whitespace() && !in_single && !in_double => return i,
            _ => i += 1,
        }
    }
    len
}

/// Like `check_interpreter_abuse` but only checks for eval flags on interpreters.
/// Skips allowlist-membership tests (no allowlist exists in blocklist-only mode),
/// but still follows delegation wrappers so `xargs bash -c …` / `timeout 5 sh -c …`
/// cannot smuggle inline code past the check (GH #391).
fn check_interpreter_eval_only(segment: &str) -> Result<(), String> {
    check_interpreter_eval_only_inner(segment, 0)
}

fn check_interpreter_eval_only_inner(segment: &str, depth: usize) -> Result<(), String> {
    if depth > 3 {
        return Ok(());
    }
    let trimmed = skip_env_assignments(segment.trim());
    let tokens = shell_tokenize(trimmed);
    if tokens.is_empty() {
        return Ok(());
    }
    let base = tokens[0]
        .rsplit('/')
        .next()
        .unwrap_or(&tokens[0])
        .to_string();

    if DELEGATION_COMMANDS.contains(&base.as_str()) {
        let rest_tokens = delegated_command_tokens(&tokens[1..]);
        if !rest_tokens.is_empty() {
            return check_interpreter_eval_only_inner(&rest_tokens.join(" "), depth + 1);
        }
        return Ok(());
    }

    if !INTERPRETER_COMMANDS.contains(&base.as_str()) {
        return Ok(());
    }
    for tok in &tokens[1..] {
        if EVAL_FLAGS.contains(&tok.as_str()) {
            return Err(format!(
                "[BLOCKED — DO NOT RETRY] Interpreter '{base}' with inline code execution \
                 flag '{tok}' is blocked. Use a script file instead.\n\
                 This is a permanent security restriction."
            ));
        }
        if has_eval_flag_prefix(tok) {
            return Err(format!(
                "[BLOCKED — DO NOT RETRY] Interpreter '{base}' with combined flag '{tok}' \
                 containing eval flag is blocked.\n\
                 This is a permanent security restriction."
            ));
        }
    }
    if tokens[1..].iter().any(|t| t.contains("<<")) {
        return Err(format!(
            "[BLOCKED — DO NOT RETRY] Interpreter '{base}' with heredoc stdin is blocked. \
             Use a script file instead.\n\
             This is a permanent security restriction."
        ));
    }
    Ok(())
}

/// Commands that are unconditionally blocked regardless of allowlist membership.
/// These provide direct arbitrary code execution or re-enter the shell.
const UNCONDITIONAL_BLOCKED: &[&str] = &["eval", "exec", "source", "."];

/// Interpreters that can execute arbitrary code via -c/-e flags.
const INTERPRETER_COMMANDS: &[&str] = &[
    "python", "python3", "python2", "node", "ruby", "perl", "lua", "php", "bash", "sh", "zsh",
    "fish", "dash", "ksh",
];

/// Flags that indicate inline code execution for interpreters.
const EVAL_FLAGS: &[&str] = &[
    "-c", "-e", "-r", "-p", "--eval", "--exec", "-exec", "--print", "--run",
];

/// Script file extensions that indicate a file argument (not stdin execution).
const SCRIPT_EXTENSIONS: &[&str] = &[
    ".py", ".rb", ".js", ".ts", ".pl", ".lua", ".php", ".sh", ".bash", ".zsh", ".mjs", ".cjs",
    ".tsx", ".jsx",
];

/// Commands that delegate to another command (the delegated command must also be allowed).
/// `xargs` is here because `… | xargs bash -c '…'` would otherwise smuggle an
/// interpreter past both the allowlist and the inline-code check (GH #391).
const DELEGATION_COMMANDS: &[&str] = &["env", "nice", "timeout", "sudo", "doas", "xargs", "nohup"];

/// Skips a delegation command's own flags/operands to find the delegated
/// command token: leading `-x` flags, `KEY=VALUE` pairs (env), bare numbers
/// (timeout/nice durations) and `{}` placeholders (xargs -I).
fn delegated_command_tokens(tokens: &[String]) -> Vec<&str> {
    tokens
        .iter()
        .map(std::string::String::as_str)
        .skip_while(|t| {
            t.starts_with('-')
                || t.contains('=')
                || *t == "{}"
                || (!t.is_empty() && t.chars().all(|c| c.is_ascii_digit()))
        })
        .collect()
}

/// Check if a segment uses an interpreter with an eval flag, or a delegation command
/// whose target is not in the allowlist.
fn check_interpreter_abuse(segment: &str, allowlist: &[String]) -> Result<(), String> {
    check_interpreter_abuse_inner(segment, allowlist, 0)
}

fn check_interpreter_abuse_inner(
    segment: &str,
    allowlist: &[String],
    depth: usize,
) -> Result<(), String> {
    if depth > 3 {
        return Ok(());
    }
    let trimmed = skip_env_assignments(segment.trim());
    let tokens = shell_tokenize(trimmed);
    if tokens.is_empty() {
        return Ok(());
    }

    let base = tokens[0]
        .rsplit('/')
        .next()
        .unwrap_or(&tokens[0])
        .to_string();

    if INTERPRETER_COMMANDS.contains(&base.as_str()) {
        for tok in &tokens[1..] {
            if EVAL_FLAGS.contains(&tok.as_str()) {
                return Err(format!(
                    "[BLOCKED — DO NOT RETRY] Interpreter '{base}' with inline code execution \
                     flag '{tok}' is blocked. Use a script file instead.\n\
                     This is a permanent security restriction."
                ));
            }
            if has_eval_flag_prefix(tok) {
                return Err(format!(
                    "[BLOCKED — DO NOT RETRY] Interpreter '{base}' with combined flag '{tok}' \
                     containing eval flag is blocked.\n\
                     This is a permanent security restriction."
                ));
            }
        }
        if tokens[1..].iter().any(|t| t.contains("<<")) {
            return Err(format!(
                "[BLOCKED — DO NOT RETRY] Interpreter '{base}' with heredoc stdin is blocked. \
                 Use a script file instead.\n\
                 This is a permanent security restriction."
            ));
        }
    }

    if DELEGATION_COMMANDS.contains(&base.as_str()) {
        let rest_tokens = delegated_command_tokens(&tokens[1..]);
        if let Some(&delegated_tok) = rest_tokens.first() {
            let delegated = delegated_tok.rsplit('/').next().unwrap_or(delegated_tok);
            if !delegated.is_empty() && !allowlist.iter().any(|a| a == delegated) {
                return Err(format!(
                    "[BLOCKED — DO NOT RETRY] '{base}' delegates to '{delegated}' which is not \
                     in the shell allowlist. This is a permanent restriction."
                ));
            }
            let rest_str = rest_tokens.join(" ");
            check_interpreter_abuse_inner(&rest_str, allowlist, depth + 1)?;
        }
    }

    Ok(())
}

/// Check for combined flags like -pe, -ne, -ce that contain eval characters.
fn has_eval_flag_prefix(token: &str) -> bool {
    if !token.starts_with('-') || token.starts_with("--") || token.len() < 3 {
        return false;
    }
    let flag_chars = &token[1..];
    let eval_chars = ['c', 'e', 'r', 'p'];
    flag_chars.chars().any(|c| eval_chars.contains(&c))
}

/// Check if a segment is a bare interpreter after a pipe (no script file argument).
fn is_bare_interpreter_stdin(segment: &str) -> bool {
    let trimmed = skip_env_assignments(segment.trim());
    let tokens = shell_tokenize(trimmed);
    if tokens.is_empty() {
        return false;
    }
    let base = tokens[0]
        .rsplit('/')
        .next()
        .unwrap_or(&tokens[0])
        .to_string();
    if !INTERPRETER_COMMANDS.contains(&base.as_str()) {
        return false;
    }
    !tokens[1..]
        .iter()
        .any(|t| !t.starts_with('-') && SCRIPT_EXTENSIONS.iter().any(|ext| t.ends_with(ext)))
}

/// Dangerous flag patterns for specific commands.
const DANGEROUS_GIT_FLAGS: &[&str] = &[
    "--upload-pack",
    "--receive-pack",
    "--config=core.sshcommand",
    "--config=core.gitproxy",
];

const DANGEROUS_TAR_FLAGS: &[&str] = &["--to-command", "--use-compress-program"];

/// Blocked inline environment assignments that can hijack execution.
const BLOCKED_INLINE_ENV: &[&str] = &[
    "PATH=",
    "GIT_ASKPASS=",
    "GIT_SSH=",
    "GIT_SSH_COMMAND=",
    "GIT_EDITOR=",
    "GIT_EXTERNAL_DIFF=",
    "SSH_ASKPASS=",
    "LD_PRELOAD=",
    "DYLD_INSERT_LIBRARIES=",
];

fn check_dangerous_flags(segment: &str) -> Result<(), String> {
    let trimmed = skip_env_assignments(segment.trim());
    let tokens = shell_tokenize(trimmed);
    if tokens.is_empty() {
        return Ok(());
    }
    let base = tokens[0]
        .rsplit('/')
        .next()
        .unwrap_or(&tokens[0])
        .to_string();

    match base.as_str() {
        "git" => {
            for tok in &tokens[1..] {
                for flag in DANGEROUS_GIT_FLAGS {
                    if tok.starts_with(flag) {
                        return Err(format!(
                            "[BLOCKED — DO NOT RETRY] 'git' with dangerous flag '{tok}' is blocked.\n\
                             This is a permanent security restriction."
                        ));
                    }
                }
            }
        }
        "tar" => {
            for tok in &tokens[1..] {
                for flag in DANGEROUS_TAR_FLAGS {
                    if tok.starts_with(flag) {
                        return Err(format!(
                            "[BLOCKED — DO NOT RETRY] 'tar' with dangerous flag '{tok}' is blocked.\n\
                             This is a permanent security restriction."
                        ));
                    }
                }
            }
        }
        "find" => {
            for tok in &tokens[1..] {
                if tok == "-exec" || tok == "-execdir" {
                    return Err(format!(
                        "[BLOCKED — DO NOT RETRY] 'find' with '{tok}' is blocked. \
                         Use 'find ... -print' and pipe to xargs instead.\n\
                         This is a permanent security restriction."
                    ));
                }
            }
        }
        "awk" | "gawk" | "mawk" => {
            for tok in &tokens[1..] {
                if tok.contains("system(") {
                    return Err(format!(
                        "[BLOCKED — DO NOT RETRY] '{base}' with 'system()' call is blocked.\n\
                         This is a permanent security restriction."
                    ));
                }
            }
        }
        _ => {}
    }
    Ok(())
}

fn check_inline_env_block(segment: &str) -> Result<(), String> {
    let trimmed = segment.trim();
    for blocked in BLOCKED_INLINE_ENV {
        if trimmed.starts_with(blocked) {
            return Err(format!(
                "[BLOCKED — DO NOT RETRY] Inline environment override '{blocked}' is blocked.\n\
                 This is a permanent security restriction."
            ));
        }
    }
    Ok(())
}

/// Shell reserved words whose operator-delimited segment carries no validatable
/// simple command: the `for`/`select` loop *header* (`for x in LIST`) is data,
/// and `done`/`fi`/`in` close or join a construct. A segment starting with one
/// of these contributes no leaf command.
const HEADER_KEYWORDS: &[&str] = &["for", "select", "in", "done", "fi"];

/// Shell reserved words that *introduce* a command which must still be validated:
/// the condition of `if`/`while`/`until`, the body after `do`/`then`/`else`/
/// `elif`, and the `time`/`!` modifiers. They are stripped so the real leaf
/// command behind them is checked against the allowlist.
const BODY_INTRO_KEYWORDS: &[&str] = &[
    "do", "then", "else", "elif", "if", "while", "until", "time", "!",
];

/// Expand a (possibly compound) command into the list of simple-command *leaves*
/// that must each satisfy the allowlist. This is what makes `for … do CMD; done`,
/// `if COND; then CMD; fi`, `while …; do CMD; done` and balanced `( CMD )`
/// subshells usable in restricted mode without weakening deny-by-default: every
/// leaf is still validated, headers/terminators contribute nothing, and any form
/// this conservative walker cannot prove safe (`case`/`esac`, `;;`, a subshell
/// with trailing content, deep nesting) is rejected — it over-blocks, never
/// under-blocks.
fn expand_to_leaf_segments(command: &str) -> Result<Vec<String>, String> {
    if has_case_construct(command) {
        return Err(format!(
            "[BLOCKED — DO NOT RETRY] `case`/`esac` constructs are not supported in \
             restricted (allowlisted) shell mode — their `pattern)` arms cannot be \
             leaf-validated safely. Run a script file or disable the allowlist instead.\n\
             Command: {command}"
        ));
    }
    let mut leaves = Vec::new();
    for seg in extract_all_commands(command) {
        resolve_segment_leaves(&seg, 0, &mut leaves)?;
    }
    Ok(leaves)
}

/// Resolve one operator-delimited segment into zero or more leaf commands,
/// stripping reserved words and recursing into balanced `( … )` subshells.
fn resolve_segment_leaves(
    segment: &str,
    depth: usize,
    out: &mut Vec<String>,
) -> Result<(), String> {
    if depth > 4 {
        return Err(format!(
            "[BLOCKED — DO NOT RETRY] Shell command nests compound/subshell groups too \
             deeply to validate safely.\nCommand: {segment}"
        ));
    }
    let mut s = segment.trim();
    loop {
        let tokens = shell_tokenize(s);
        let Some(first) = tokens.first() else {
            return Ok(()); // empty → no command
        };
        let kw = first.as_str();
        if HEADER_KEYWORDS.contains(&kw) {
            return Ok(()); // loop header / terminator carries no leaf command
        }
        if BODY_INTRO_KEYWORDS.contains(&kw) {
            s = remainder_after_first_token(s).trim();
            if s.is_empty() {
                return Ok(());
            }
            continue;
        }
        break;
    }
    if let Some(inner) = balanced_paren_inner(s) {
        for inner_seg in extract_all_commands(inner) {
            resolve_segment_leaves(&inner_seg, depth + 1, out)?;
        }
        return Ok(());
    }
    // Anything else (incl. `( … ) trailing`, brace groups, leftover delimiters) is
    // pushed verbatim: base-extraction below sees a first token like `(ls)` or `{`
    // that cannot match any allowlist entry, so it is blocked. `cmd (sub)` without
    // a separator is a shell syntax error, so no executable leaf escapes here.
    out.push(s.to_string());
    Ok(())
}

/// Return the substring after the first whitespace-delimited (quote-aware) token.
fn remainder_after_first_token(s: &str) -> &str {
    let trimmed = s.trim_start();
    let end = quote_aware_token_end(trimmed);
    &trimmed[end..]
}

/// If `s` is a single balanced `( … )` subshell with nothing trailing the closing
/// paren, return the inner command (`(a; b)` → `a; b`). `(a) b` returns `None`:
/// the trailing content falls through to base extraction, which blocks it.
fn balanced_paren_inner(segment: &str) -> Option<&str> {
    let trimmed = segment.trim();
    let bytes = trimmed.as_bytes();
    if bytes.first() != Some(&b'(') {
        return None;
    }
    let len = bytes.len();
    let mut depth: i32 = 0;
    let mut in_single_quote = false;
    let mut in_double_quote = false;
    let mut i = 0;
    while i < len {
        let ch = bytes[i];
        if in_single_quote {
            if ch == b'\'' {
                in_single_quote = false;
            }
            i += 1;
            continue;
        }
        if in_double_quote {
            if ch == b'"' && (i == 0 || bytes[i - 1] != b'\\') {
                in_double_quote = false;
            }
            i += 1;
            continue;
        }
        match ch {
            b'\'' => in_single_quote = true,
            b'"' => in_double_quote = true,
            b'(' => depth += 1,
            b')' => {
                depth -= 1;
                if depth == 0 {
                    return if i == len - 1 {
                        Some(trimmed[1..i].trim())
                    } else {
                        None
                    };
                }
            }
            _ => {}
        }
        i += 1;
    }
    None
}

/// True when the command uses a `case`/`esac`/`;;` construct. The leaf walker
/// deliberately does not parse these (the `pattern)` arms make safe leaf
/// extraction error-prone), so they are blocked outright in restricted mode.
fn has_case_construct(command: &str) -> bool {
    for seg in split_on_operators(command) {
        if shell_tokenize(seg.trim())
            .iter()
            .any(|t| t == "case" || t == "esac")
        {
            return true;
        }
    }
    contains_double_semicolon(command)
}

/// Quote-aware scan for a `;;` terminator (the `case` arm separator).
fn contains_double_semicolon(command: &str) -> bool {
    let bytes = command.as_bytes();
    let len = bytes.len();
    let mut in_single_quote = false;
    let mut in_double_quote = false;
    let mut i = 0;
    while i < len {
        let ch = bytes[i];
        if in_single_quote {
            if ch == b'\'' {
                in_single_quote = false;
            }
            i += 1;
            continue;
        }
        if in_double_quote {
            if ch == b'"' && (i == 0 || bytes[i - 1] != b'\\') {
                in_double_quote = false;
            }
            i += 1;
            continue;
        }
        match ch {
            b'\'' => in_single_quote = true,
            b'"' => in_double_quote = true,
            b';' if i + 1 < len && bytes[i + 1] == b';' => return true,
            _ => {}
        }
        i += 1;
    }
    false
}

fn check_all_segments(command: &str, allowlist: &[String]) -> Result<(), String> {
    if allowlist.is_empty() {
        return Ok(());
    }

    if has_dangerous_patterns(command) {
        return Err(format!(
            "[BLOCKED — DO NOT RETRY] Command uses eval or $()/ backticks at command position, \
             which is blocked in restricted mode. \
             This is a permanent security restriction, not a transient error.\n\
             Command: {command}"
        ));
    }

    let segments = expand_to_leaf_segments(command)?;
    if segments.is_empty() {
        return Err("[BLOCKED — DO NOT RETRY] Empty command".to_string());
    }

    for seg in &segments {
        check_inline_env_block(seg)?;
        let base = extract_base_from_segment(seg);
        if base.is_empty() {
            continue;
        }
        if UNCONDITIONAL_BLOCKED.contains(&base.as_str()) {
            return Err(format!(
                "[BLOCKED — DO NOT RETRY] '{base}' is unconditionally blocked \
                 regardless of allowlist membership. \
                 This is a permanent security restriction.\n\
                 Command: {command}"
            ));
        }
        check_interpreter_abuse(seg, allowlist)?;
        check_dangerous_flags(seg)?;
        if !allowlist.iter().any(|a| a == &base) {
            return Err(allowlist_block_message(&base));
        }
    }
    Ok(())
}

/// Detect dangerous shell patterns that bypass allowlist intent.
///
/// Only blocks patterns that are genuinely dangerous at command position.
/// `$()` and backticks in *arguments* are allowed — the base command is
/// already validated by the allowlist, and blocking substitutions in
/// arguments breaks legitimate workflows (e.g. `git commit -m "$(cat ...)"`,
/// pre-commit hooks, playwright scripts).
fn has_dangerous_patterns(command: &str) -> bool {
    let trimmed = command.trim();

    for blocked in UNCONDITIONAL_BLOCKED {
        let with_space = format!("{blocked} ");
        if trimmed.starts_with(&with_space) {
            return true;
        }
        for sep in ["; ", "&& ", "|| ", "| ", "\n"] {
            if trimmed.contains(&format!("{sep}{blocked} ")) {
                return true;
            }
        }
    }

    if has_substitution_at_command_pos(trimmed) {
        return true;
    }

    false
}

/// Check if `$()` or backticks appear at command position (first token
/// of any segment). Substitutions in *arguments* are intentionally
/// allowed — the security boundary is the base-command allowlist check.
fn has_substitution_at_command_pos(command: &str) -> bool {
    let segments = split_on_operators(command);
    for seg in segments {
        let trimmed = seg.trim();
        let cmd_start = skip_env_assignments(trimmed);

        if cmd_start.starts_with("$(") {
            return true;
        }

        let tokens = shell_tokenize(cmd_start);
        let first_token = tokens.first().map_or("", std::string::String::as_str);
        if first_token.starts_with('`') || first_token == "`" {
            return true;
        }
    }
    false
}

/// Extract ALL command segments from a compound shell command.
/// Splits on: &&, ||, ;, | (pipe), and handles subshell grouping.
fn extract_all_commands(command: &str) -> Vec<String> {
    split_on_operators(command)
        .into_iter()
        .map(|s| s.trim().to_string())
        .filter(|s| !s.is_empty())
        .collect()
}

/// Split command string on shell operators: ;, &&, ||, |
/// Respects single/double quotes and parentheses nesting.
fn split_on_operators(command: &str) -> Vec<&str> {
    let mut segments = Vec::new();
    let mut start = 0;
    let bytes = command.as_bytes();
    let len = bytes.len();
    let mut i = 0;
    let mut in_single_quote = false;
    let mut in_double_quote = false;
    let mut paren_depth: u32 = 0;

    while i < len {
        let ch = bytes[i];

        if in_single_quote {
            if ch == b'\'' {
                in_single_quote = false;
            }
            i += 1;
            continue;
        }

        if in_double_quote {
            if ch == b'"' && (i == 0 || bytes[i - 1] != b'\\') {
                in_double_quote = false;
            }
            i += 1;
            continue;
        }

        match ch {
            b'\'' => {
                in_single_quote = true;
                i += 1;
            }
            b'"' => {
                in_double_quote = true;
                i += 1;
            }
            b'(' => {
                paren_depth += 1;
                i += 1;
            }
            b')' => {
                paren_depth = paren_depth.saturating_sub(1);
                i += 1;
            }
            b'\n' | b'\r' | b';' if paren_depth == 0 => {
                segments.push(&command[start..i]);
                i += 1;
                start = i;
            }
            b'&' if paren_depth == 0 => {
                if i + 1 < len && bytes[i + 1] == b'&' {
                    // &&
                    segments.push(&command[start..i]);
                    i += 2;
                    start = i;
                } else if (i > 0 && bytes[i - 1] == b'>') || (i + 1 < len && bytes[i + 1] == b'>') {
                    // Redirect operator, NOT a separator: `2>&1`, `1>&2`, `>&file` (prev is '>')
                    // or `&>file`, `&>>file` (next is '>'). The '&' belongs to the current
                    // command — splitting here would mistake the fd/target (e.g. `1`) for a
                    // standalone command and falsely block it (#334).
                    i += 1;
                } else {
                    // single & (background operator) — still a command separator
                    segments.push(&command[start..i]);
                    i += 1;
                    start = i;
                }
            }
            b'|' if paren_depth == 0 => {
                if i + 1 < len && bytes[i + 1] == b'|' {
                    // ||
                    segments.push(&command[start..i]);
                    i += 2;
                    start = i;
                } else if i > 0 && bytes[i - 1] == b'>' {
                    // `>|` (noclobber redirect), NOT a pipe: the '|' belongs to
                    // the redirect operator and the following token is a file
                    // path, not a command. Splitting here treated the target
                    // (e.g. `out` in `date >| out`) as a command and falsely
                    // blocked it against the allowlist (#387).
                    i += 1;
                } else {
                    // pipe
                    segments.push(&command[start..i]);
                    i += 1;
                    start = i;
                }
            }
            _ => {
                i += 1;
            }
        }
    }

    if start < len {
        segments.push(&command[start..]);
    }

    segments
}

/// Extract the base command name from a single segment (no operators).
fn extract_base_from_segment(segment: &str) -> String {
    let trimmed = segment.trim();
    if trimmed.is_empty() {
        return String::new();
    }

    let cmd_part = skip_env_assignments(trimmed);
    if cmd_part.is_empty() {
        return String::new();
    }

    let tokens = shell_tokenize(cmd_part);
    let first_token = tokens.first().map_or("", std::string::String::as_str);

    first_token
        .rsplit('/')
        .next()
        .unwrap_or(first_token)
        .to_string()
}

/// Skip leading KEY=VALUE environment variable assignments.
/// Uses quote-aware scanning so `FOO="bar baz" git status` correctly
/// skips the entire `FOO="bar baz"` token.
fn skip_env_assignments(segment: &str) -> &str {
    let mut rest = segment;
    loop {
        let rest_trimmed = rest.trim_start();
        if rest_trimmed.is_empty() {
            return rest_trimmed;
        }
        let end = quote_aware_token_end(rest_trimmed);
        if end == 0 {
            return rest_trimmed;
        }
        let raw_token = &rest_trimmed[..end];
        let unquoted: String = raw_token
            .chars()
            .filter(|c| *c != '"' && *c != '\'')
            .collect();
        if unquoted.contains('=')
            && !unquoted.starts_with('-')
            && !unquoted.starts_with('/')
            && !unquoted.starts_with('.')
        {
            rest = &rest_trimmed[end..];
        } else {
            return rest_trimmed;
        }
    }
}

fn effective_allowlist() -> Vec<String> {
    // LEAN_CTX_SHELL_ALLOWLIST_OVERRIDE completely replaces the config (for testing)
    if let Ok(ov) = std::env::var("LEAN_CTX_SHELL_ALLOWLIST_OVERRIDE") {
        return ov
            .split(',')
            .map(|s| s.trim().to_string())
            .filter(|s| !s.is_empty())
            .collect();
    }
    let cfg = crate::core::config::Config::load();
    let mut list = cfg.shell_allowlist;
    // `shell_allowlist_extra` is purely additive (written by `lean-ctx allow <cmd>`),
    // so users can permit a command without nuking the built-in defaults. It only
    // matters in restricted mode — when the base list is empty all commands pass anyway.
    if !list.is_empty() {
        for entry in cfg.shell_allowlist_extra {
            if !entry.is_empty() && !list.contains(&entry) {
                list.push(entry);
            }
        }
    }
    if let Ok(env_val) = std::env::var("LEAN_CTX_SHELL_ALLOWLIST") {
        for entry in env_val
            .split(',')
            .map(|s| s.trim().to_string())
            .filter(|s| !s.is_empty())
        {
            if !list.contains(&entry) {
                list.push(entry);
            }
        }
    }
    list
}

/// Builds the actionable, self-diagnosing message shown when a command's base binary
/// is not in the allowlist. Unlike a bare "not allowed" string, it tells the user
/// (1) the exact additive fix, (2) the real config path the MCP server reads, and
/// (3) — crucially — whether their `config.toml` silently failed to parse (in which
/// case lean-ctx is on defaults, which is the usual reason an allowlist edit "did
/// nothing"). That last signal is otherwise invisible over an MCP/stdio transport.
fn allowlist_block_message(base: &str) -> String {
    let cfg_path = crate::core::config::Config::path().map_or_else(
        || "~/.lean-ctx/config.toml".to_string(),
        |p| p.display().to_string(),
    );

    let mut msg = format!(
        "[BLOCKED — DO NOT RETRY] '{base}' is not in the shell allowlist. \
         This is a permanent restriction, not a transient error.\n\
         Fix (additive, keeps the defaults): run  lean-ctx allow {base}\n\
         Config in effect: {cfg_path}\n\
         Or disable the allowlist entirely: set  shell_allowlist = []\n\
         Or turn off all shell gating (you own the risk): set  shell_security = \"off\"  \
         (or env LEAN_CTX_SHELL_SECURITY=off) — compression still applies.\n\
         Do NOT retry this command — it will fail again with the same error."
    );

    if crate::core::config::cloud_infra_commands().contains(&base) {
        msg.push_str(
            "\nNote: cloud/infra CLIs (terraform, kubectl, aws, …) are deliberately \
             excluded from the defaults — they mutate remote infrastructure with \
             ambient credentials. Opting in is a deliberate user decision.",
        );
    }

    if let Some(parse_err) = crate::core::config::last_config_parse_error() {
        msg.push_str(&format!(
            "\n\n⚠ Your config.toml currently FAILS to parse, so lean-ctx is running on the \
             built-in defaults — this is almost certainly why editing the allowlist had no \
             effect. Fix the TOML error below, then retry:\n  {parse_err}\n  File: {cfg_path}"
        ));
    } else if let Some(missing) = crate::core::config::Config::missing_config_path() {
        // The resolved config doesn't exist → lean-ctx is on defaults. An edit
        // made to a config.toml in a different dir (XDG vs legacy ~/.lean-ctx) or
        // under a sandboxed/container HOME is never read — say so over MCP (#540).
        msg.push_str(&format!(
            "\n\n⚠ No config file exists at {} — lean-ctx is running on built-in defaults. \
             If you added the command to a config.toml in a DIFFERENT location (XDG \
             ~/.config/lean-ctx vs legacy ~/.lean-ctx, or your MCP client launches lean-ctx \
             in a sandbox/container with a different HOME), the runtime never reads it. \
             `lean-ctx doctor` prints the path actually in effect; pin it with \
             LEAN_CTX_CONFIG_DIR.",
            missing.display()
        ));
    }

    // A project-local `shell_allowlist`/`shell_allowlist_extra` is silently
    // withheld for an untrusted workspace; surface that here so the edit's
    // no-op reason isn't buried in an MCP-invisible stderr warning (#540).
    if let Some(notice) = crate::core::workspace_trust::untrusted_override_notice() {
        msg.push_str("\n\n⚠ ");
        msg.push_str(&notice);
    }

    msg
}

/// Public accessor for extracting all command segments.
pub fn extract_all_commands_pub(command: &str) -> Vec<String> {
    extract_all_commands(command)
}

/// Public accessor: the fully-resolved allowlist actually enforced by the MCP tools
/// (base `shell_allowlist` + additive `shell_allowlist_extra` + env), deduplicated.
/// Empty means blocklist-only mode (all commands pass). Used by `lean-ctx allow`
/// and `lean-ctx doctor` to show users exactly what the runtime sees.
#[must_use]
pub fn effective_allowlist_pub() -> Vec<String> {
    effective_allowlist()
}

// Legacy compat: single-segment extraction (used by other callers)
pub fn extract_base_command(command: &str) -> String {
    let first_seg = split_on_operators(command)
        .into_iter()
        .next()
        .unwrap_or(command);
    extract_base_from_segment(first_seg)
}