lcd1602rs 0.3.0

//
// 2x16 LCD display (HD44780 controller + I2C chip)
//
// Copyright (c) BitBank Software, Inc.
// Written for lcd1602 by Larry Bank
// Adapted to lcd2004 by Robert Czechowski
// bitbank@pobox.com
// Project started 12/6/2017
//
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.
//

#include <unistd.h>
#include <stdio.h>
#include <string.h>
#include <stdint.h>
#include <fcntl.h>
#include <sys/ioctl.h>
#include <linux/types.h>
#include <linux/i2c-dev.h>
//
// The LCD controller is wired to the I2C port expander with the upper 4 bits
// (D4-D7) connected to the data lines and the lower 4 bits (D0-D3) used as
// control lines. Here are the control line definitions:
//
// Command (0) / Data (1) (aka RS) (D0)
// R/W                             (D1)
// Enable/CLK                      (D2)
// Backlight control               (D3)
//
// The data must be manually clocked into the LCD controller by toggling
// the CLK line after the data has been placed on D4-D7
//
#define PULSE_PERIOD 500
#define CMD_PERIOD 4100

#define BACKLIGHT 8
#define DATA 1
static int iBackLight = BACKLIGHT;
static int file_i2c = -1;

static void WriteCommand(unsigned char ucCMD)
{
unsigned char uc;

	uc = (ucCMD & 0xf0) | iBackLight; // most significant nibble sent first
	write(file_i2c, &uc, 1);
	usleep(PULSE_PERIOD); // manually pulse the clock line
	uc |= 4; // enable pulse
	write(file_i2c, &uc, 1);
	usleep(PULSE_PERIOD);
	uc &= ~4; // toggle pulse
	write(file_i2c, &uc, 1);
	usleep(CMD_PERIOD);
	uc = iBackLight | (ucCMD << 4); // least significant nibble
	write(file_i2c, &uc, 1);
	usleep(PULSE_PERIOD);
        uc |= 4; // enable pulse
        write(file_i2c, &uc, 1);
        usleep(PULSE_PERIOD);
        uc &= ~4; // toggle pulse
        write(file_i2c, &uc, 1);
	usleep(CMD_PERIOD);

} /* WriteCommand() */

//
// Control the backlight, cursor, and blink
// The cursor is an underline and is separate and distinct
// from the blinking block option
//
int lcd2004Control(int bBacklight, int bCursor, int bBlink)
{
unsigned char ucCMD = 0xc; // display control

	if (file_i2c < 0)
		return 1;
	iBackLight = (bBacklight) ? BACKLIGHT : 0;
	if (bCursor)
		ucCMD |= 2;
	if (bBlink)
		ucCMD |= 1;
	WriteCommand(ucCMD);

	return 0;
} /* lcd2004Control() */

//
// Write an ASCII string (up to 20 characters at a time)
//
int lcd2004WriteString(char *text)
{
unsigned char ucTemp[2];
int i = 0;

	if (file_i2c < 0 || text == NULL)
		return 1;

	while (i<20 && *text)
	{
		ucTemp[0] = iBackLight | DATA | (*text & 0xf0);
		write(file_i2c, ucTemp, 1);
		usleep(PULSE_PERIOD);
		ucTemp[0] |= 4; // pulse E
		write(file_i2c, ucTemp, 1);
		usleep(PULSE_PERIOD);
		ucTemp[0] &= ~4;
		write(file_i2c, ucTemp, 1);
		usleep(PULSE_PERIOD);
		ucTemp[0] = iBackLight | DATA | (*text << 4);
		write(file_i2c, ucTemp, 1);
		ucTemp[0] |= 4; // pulse E
                write(file_i2c, ucTemp, 1);
                usleep(PULSE_PERIOD);
                ucTemp[0] &= ~4;
                write(file_i2c, ucTemp, 1);
                usleep(CMD_PERIOD);
		text++;
		i++;
	}
	return 0;
} /* WriteString() */

//
// Erase the display memory and reset the cursor to 0,0
//
int lcd2004Clear(void)
{
	if (file_i2c < 0)
		return 1;
	WriteCommand(0x01); // clear the screen
	return 0;

} /* lcd2004Clear() */

//
// Open a file handle to the I2C device
// Set the controller into 4-bit mode and clear the display
// returns 0 for success, 1 for failure
//
int lcd2004Init(int iChannel, int iAddr)
{
char szFile[80];
int rc;

	sprintf(szFile, "/dev/i2c-%d", iChannel);
	file_i2c = open(szFile, O_RDWR);
	if (file_i2c < 0)
	{
		fprintf(stderr, "Error opening i2c device; not running as sudo?\n");
		return 1;
	}
	rc = ioctl(file_i2c, I2C_SLAVE, iAddr);
	if (rc < 0)
	{
		close(file_i2c);
		fprintf(stderr, "Error setting I2C device address\n");
		return 1;
	}
	iBackLight = BACKLIGHT; // turn on backlight
	WriteCommand(0x02); // Set 4-bit mode of the LCD controller
	WriteCommand(0x28); // 4 lines, 5x8 dot matrix
	WriteCommand(0x0c); // display on, cursor off
	WriteCommand(0x06); // inc cursor to right when writing and don't scroll
	WriteCommand(0x80); // set cursor to row 1, column 1
	lcd2004Clear();	    // clear the memory

	return 0;
} /* lcd2004Init() */

//
// Set the LCD cursor position
//
int lcd2004SetCursor(int x, int y)
{
unsigned char cCmd;

	if (file_i2c < 0 || x < 0 || x > 19 || y < 0 || y > 3)
		return 1;

	cCmd = (y==0) ? 0x80 : 0xc0;
	cCmd |= x;
	WriteCommand(cCmd);
	return 0;

} /* lcd2004SetCursor() */

void lcd2004Shutdown(void)
{
	iBackLight = 0; // turn off backlight
	WriteCommand(0x08); // turn off display, cursor and blink
	close(file_i2c);
	file_i2c = -1;
} /* lcd2004Shutdown() */