##############################################################################
#
# DATA
#
##############################################################################
# Specify the storage used by Krill.
#
# Currently, Krill supports disk based storage only.
#
# You can use a shared disk and a standby Krill node for redundancy.
# However, data corruption issues can occur if you run multiple active
# Krill nodes using a shared disk. Therefore, you MUST ensure that only
# one Krill node is active at any given time.
#
# Example configurations:
# storage_uri = "/var/lib/krill/data/"
#
# Default:
# storage_uri = "./data"
#
# For backward compatibility 'data_dir' is accepted as an
# alternative to 'storage_uri'.
#
### storage_uri = "./data"
# TLS Keys Dir
#
# Specify the location of the TLS directory for Krill's
# built-in HTTPS server. This MUST be set in case the
# storage_uri maps to a database.
#
# Default:
# tls_keys_dir = $storage_uri/ssl
# Repository Directory
#
# This is the directory used by the Krill Publication Server
# for the publication of RPKI objects.
#
# This defaults a directory called "repo" under your server's
# data directory. If your server uses a database for storage,
# this value MUST be set - even if you do not use Krill as a
# Publication Server. This will change when issues #1092 and
# #1093 are implemented.
#
# repo_dir = /path/to/repo/
# Upgrade Storage Uri
#
# This MUST be set if a database is used. We will remove this
# when we implement issue #1094.
#
# upgrade_storage_uri = $data_dir/upgrade-data/
# History Cache
#
# Krill keeps meta-information on all past changes for each CA
# and the Publication Server. This information is cached by default
# to ensure that the history (audit log) API is fast.
#
# However, this data can add up over time, so operators of
# instances with many CAs or a lot of historical may choose
# to turn this off to save memory. Note that memory will still
# be used temporarily in case the history API is accessed.
#
### use_history_cache = true
# Specify the path to the PID file for Krill.
#
# Defaults to "krill.pid" under the 'data_dir' specified above.
#
### pid_file = "./data/krill.pid"
##############################################################################
#
# LOGGING
#
##############################################################################
# Log level
#
# The maximum log level ("off", "error", "warn", "info", or "debug") for
# which to log messages.
#
# Defaults to "warn"
#
### log_level = "warn"
# Log type
#
# Where to log to. One of "stderr" for stderr, "syslog" for syslog, or
# "file" for a file. If "file" is given, the "log_file" field needs to be
# given, too.
#
### log_type = "file"
# Syslog facility
#
# The syslog facility to log to if syslog logging is used. Defaults to
# "daemon".
#
### syslog_facility = "daemon"
# Log file
#
# The path to the file to log to if file logging is used. If the path is
# relative, it is relative to the current working directory from which
# the binary is executed.
#
### log_file = "./krill.log"
##############################################################################
#
# ACCESS
#
##############################################################################
# Admin Token
#
# Define an admin token that can be used to interact with the API. Token use
# is modelled after OAuth 2.0 Bearer Tokens (RFC 6750), which are expected
# be included as an HTTP header in requests by clients.
#
# If you do not specify a value here, the server will insist that you
# provide a token as an environment variable with the key
# "KRILL_ADMIN_TOKEN".
#
### admin_token =
# Specify the ip addresses and port number that the server will use.
#
# Note: by default Krill uses "127.0.0.1" (IPv4 localhost) as its IP
# address. We recommend that you keep this setting and use a proxy server
# such as NGINX or Apache if you must make your Krill instance accessible
# remotely.
#
# You can use the 'ip' setting in this config file to override the default.
# You can specify a single IP address or an array of addresses.
#
# If you want to support remote delegated CAs to be children under a CA
# and/or publish their content, then you should set the "service uri"
# setting described below. If you do not set this, then Krill will use the
# (first) IP address as the hostname for this settting.
#
#
### ip = "127.0.0.1" # default
### ip = [ "127.0.0.1", "::1" ] # multiple IP addresses
### port = 3000 # applies to all ip addresses
# Specify the HTTPS mode. Krill supports three modes:
#
# "generate" (DEFAULT)
#
# Krill will generate a key pair and create a self-signed certificate
# if no previous key pair or certificate is found. File names used
# are data_dir/ssl/key.pem and data_dir/ssl/cert.pem respectively.
#
# "existing"
#
# Krill expects an existing key pair and certificate in the same
# locations where it would otherwise store its generated key pair
# and self-signed certificate.
#
# "disable"
#
# Krill will use plain HTTP.
#
# This mode is not recommended as HTTPS adds little overhead, and
# even with a self-signed certificate provides better security
# out of the box.
#
# That said, if you are running an HTTPS proxy server on the same
# host as Krill and Krill is listening on localhost only, then
# using plain HTTP between Krill and your proxy server may be an
# option you would want to use.
#
# We recommend STRONGLY that you do not use this option if your
# Krill instance is configured to bind to a public IP address.
#
# **NOTE**: Even if you use "disable" here, Krill still insists on
# using HTTPS for its service_uri. See below.
#
### https_mode = "generate"
# Specify the base public service URI hostname and port.
#
# The default service URI is set to https://localhost:3000/. This is fine
# for setups where you use Krill to run your own CA only. You do not need to
# set this to enable remote access to the UI or API (e.g. for using the CLI
# remotely). Simply setting up a proxy suffices for this.
#
# However, if you are serving as a parent CA or Publication Server that
# needs to be accessible by remote CAs, then you will need to tell your
# Krill instance what its public (base) URI will be, so that it can include
# the proper URIs in responses to those CAs.
#
# Note that Krill insists on HTTPS for this, even if you elect to use
# "disable" for the https_mode. The reason is that, while RFC 6492
# (provisioning) and RFC 8181 (publication) allow for plain HTTP and provide
# security through signed messages, we believe it is better if this (remote)
# traffic is also encrypted and one can (and should) use an HTTPS capable
# proxy in this case.
#
# At present this MUST be an https URI with a hostname and optional port
# number only. It is not allowed to use a Krill specific path prefix. If you
# have a strong motivation for this, then please comment on the following
# github issue: https://github.com/NLnetLabs/krill/issues/263
#
# Krill UI, API and service URIs will be derived as follows:
# <service_uri>api/v1/... (api)
# <service_uri>rfc6492 (for remote children)
# <service_uri>... (various UI resources)
### service_uri = "https://localhost:3000/"
##############################################################################
#
# METRICS
#
##############################################################################
# Krill exposes metrics for use with Prometheus under: <service_uri>/metrics
#
# By default a lot of details are included in these metrics. Generating
# these metrics is not particularly hard on Krill, but in case you have many
# CAs, children or publishers under your Krill instance you may still want
# to disable certain metrics to reduce the amount of data fetched and stored
# by Prometheus.
#
# Note that you can also get all of this information through the API, so
# there are other ways than using Prometheus to monitor details.
# Always enabled:
#################
#
# krill_server_start unix timestamp in seconds of last Krill server start
# krill_version_major Krill server major version number
# krill_version_minor Krill server minor version number
# krill_version_patch Krill server patch version number
# krill_cas number of cas in Krill
#
# [with multi-user support enabled (default)]
# krill_auth_session_cache_size total number of cached login session tokens
# Per CA details:
#################
#
# There are a number of metrics which use a label like {ca="ca_name"}. You can disable
# all of them by setting:
#
# metrics_hide_ca_details = true
#
# krill_ca_parent_success{ca="ca", parent="parent"} status of last CA to parent connection (0=issue, 1=success)
# krill_ca_parent_last_success_time{ca="ca", parent="parent"} unix timestamp in seconds of last successful CA to parent connection
# krill_ca_ps_success{ca="ca"} status of last CA to Publication Server connection (0=issue, 1=success)
# krill_ca_ps_last_success_time{ca="ca"} unix timestamp in seconds of last successful CA to Publication Server connection
# krill_ca_ps_next_planned_time{ca="ca"} unix timestamp in seconds of next planned CA to Publication Server connection (unless e.g. ROAs are changed)
#
# CA -> Child metrics
# -------------------
#
# NOTE: These metrics are only shown if you have any child CAs under your CA(s) in Krill.
#
# By default Krill will also show metrics on child CAs for each CA. If you left the
# showing CA details enabled, but you wish to hide these details then you can do so
# by setting:
#
# metrics_hide_child_details = true
#
# krill_cas_children{ca="ca"} number of children for CA
# krill_ca_child_success{ca="ca", child="child"} status of last child to CA connection (0=issue, 1=success)
# krill_ca_child_state{ca="ca", child="child"} child state (see 'suspend_child_after_inactive_hours' config) (0=suspended, 1=active)
# krill_ca_child_last_connection{ca="ca", child="child"} unix timestamp in seconds of last child to CA connection
# krill_ca_child_last_success{ca="ca", child="child"} unix timestamp in seconds of last successful child to CA connection
# krill_ca_child_agent_total{ca="ca", user_agent="ua string"} total children per user agent based on their last connection
#
# CA -> ROA metrics
# -----------------
#
# By default Krill will also show metrics on ROAs in relation to known BGP announcements
# for each CA. If you left the showing CA details enabled, but you wish to hide these details
# then you can do so by setting:
#
# metrics_hide_roa_details = true
#
# krill_cas_bgp_announcements_valid{ca="ca"} number of announcements seen for CA resources with RPKI state VALID
# krill_cas_bgp_announcements_invalid_asn{ca="ca"} number of announcements seen for CA resources with RPKI state INVALID (ASN mismatch)
# krill_cas_bgp_announcements_invalid_length{ca="ca"} number of announcements seen for CA resources with RPKI state INVALID (prefix exceeds max length)
# krill_cas_bgp_announcements_not_found{ca="ca"} number of announcements seen for CA resources with RPKI state NOT FOUND (none of the CA's ROAs cover this)
# krill_cas_bgp_roas_too_permissive{ca="ca"} number of ROAs for this CA which allow excess announcements (0 may also indicate that no BGP info is available)
# krill_cas_bgp_roas_redundant{ca="ca"} number of ROAs for this CA which are redundant (0 may also indicate that no BGP info is available)
# krill_cas_bgp_roas_stale{ca="ca"} number of ROAs for this CA for which no announcements are seen (0 may also indicate that no BGP info is available)
# krill_cas_bgp_roas_total{ca="ca"} total number of ROAs for this CA
# Publication Server metrics
############################
# Always enabled if you have an active Publication Server
#########################################################
# krill_repo_publisher number of publishers in repository
# krill_repo_rrdp_last_update unix timestamp in seconds of last update by any publisher
# krill_repo_rrdp_serial RRDP serial
# Per Publisher metrics
#######################
# The following metrics can be disabled by setting:
# metrics_hide_publisher_details = true
#
# krill_repo_objects{publisher="publisher"} number of objects in repository for publisher
# krill_repo_size{publisher="publisher"} size of objects in bytes in repository for publisher
# krill_repo_last_update{publisher="publisher"} unix timestamp in seconds of last update for publisher
##############################################################################
#
# OTHER SEVER SETTINGS
#
##############################################################################
# CA certificate refresh rate
#
# This defines the rate, in seconds, for Krill CAs to to contact their
# parent CA via the RFC 6492 up-down protocol and query for updates in
# resource entitlements.
#
# Minimum value is 1 hour (3600 seconds), maximum is 3 days. Values below of
# this range are set to the minimum, values above this range are capped at
# the maximum.
#
# Defaults to 24 hours: 86400 seconds
#
# This value is specified in seconds for compatability with earlier Krill
# versions.
#
### ca_refresh_seconds = 86400
# CA certificate refresh jitter
#
# In order to avoid that many child CAs contact their parent at the same time
# Krill adds a random extra 'jitter' time between 0 and the number of seconds
# specified using 'ca_refresh_jitter_seconds'.
#
# Defaults to 12 hours: 43200 seconds.
#
# Values are capped to a maximum of: 50% of ca_refresh_seconds
#
### ca_refresh_jitter_seconds = 43200
# Enable downloading RISwhois data for ROA vs BGP analysis.
#
### bgp_riswhois_enabled = true
### bgp_riswhois_v4_uri = "https://www.ris.ripe.net/dumps/riswhoisdump.IPv4.gz"
### bgp_riswhois_v6_uri = "https://www.ris.ripe.net/dumps/riswhoisdump.IPv6.gz"
### bgp_riswhois_refresh_minutes = 60
# Restrict size of messages sent to the API.
#
# Default 256 kB
#
### post_limit_api = 262144
# Restrict size of messages sent to the RFC 6492 up-down protocol. Only
# relevant if you operate Krill as a parent to other CAs.
#
# Default 1MB (enough for a keyroll with certs of ~400kb, the biggest known cert is 220kB)
#
### post_limit_rfc6492 = 1048576
# Set the timeout for a complete RFC 6492 and RFC 8181 client HTTP
# request-response round-trip to the parent or publisher, excluding the time
# required to establish the connection.
#
# Default is double what it was in Krill <0.9.5 and should be long enough in
# most cases. Change this if you see timeout errors.
#
# Defaults to 4 minutes
#
### post_protocol_msg_timeout_seconds = 240
##############################################################################
#
# --------======== DANGER ZONE ========--------
#
# Do not change the options below, unless you are really certain that you need
# to override Krill's default behaviour.
#
##############################################################################
#
# ROA Aggregation
#
# It is recommended that separate ROAs are used for each authorized prefix,
# even though the RFC allows for multiple prefixes for the same ASN to be
# combined on a single ROA object. The reason for this is that the ROA will
# become invalid if any of the listed prefixes no longer appears on your
# CA's certificate. Note that Krill will automatically clean up
# over-claiming ROAs when it finds that its resources have been shrunk, but
# there is a possible time window where ROAs can be invalid before Krill
# discovers the shrinkage.
#
# That said, if there would be too many ROAs then this will impact all RPKI
# validators, therefore Krill will by default start aggregating ROAs per ASN
# when more than 100 ROAs would be issued. Conversely, Krill will start de-
# aggregating again when the number of authorizations drops below 90.
#
# This behaviour can be overridden with the following directives:
# roa_aggregate_threshold = 100
# roa_deaggregate_threshold = 90
#
# Republication Intervals
#
# The RPKI uses Manifests (RFC 6486) to communicate the list of current RPKI
# objects (such as ROAs) to RPKI Validators. Manifests are used to protect
# against attacks, or incidents, where Validators only see a partial view of
# the RPKI repository. For this to work properly Validators will need to
# know how 'fresh' the Manifests are - otherwise they would be vulnerable to
# replay attacks where they are presented old versions of Manifests thus
# withholding them from discovering new RPKI objects.
#
# Krill issues manifests with a default next update and validity period of
# 24 hours, plus a random value between 0 and 4 hours. This random value is
# added in order to spread out scheduled next publication times between CAs.
#
# This means that the maximum replay window is 28 hours. Krill checks every
# 10 minutes whether the next update time is less then 8 hours (by default)
# in the future, and in that case it will re-issue them to avoid that
# Validators would end up with expired manifests. This means that an
# operator has a minimum of just under 8 hours to deal with issues with
# their CA or Publication Server before RPKI Validators would notice.
#
# The default values can be overridden, but with care.. make the next update
# interval too short and this causes too much work for all RPKI validators,
# puts load on your publication server and shortens your window to deal with
# issues. Make it too long and you could be vulnerable to replay attacks.
# Re-issue to quickly and again you cause extra load to RPKI validators and
# publication server.
#
# All that said.. if you are willing to accept the, in practice, small risk
# of a replay attack then you could for example opt for a
# 'timing_publish_next_hours' value of 48 hours, and a
# 'timing_publish_hours_before_next' value of 24 hours. That way you would
# have a full day to fix issues.
#
# timing_publish_next_hours = 24 # (must be 2 or higher)
# timing_publish_next_jitter_hours = 4 # must be 0 - timing_publish_next_hours / 2
# timing_publish_hours_before_next = 8 # (must be 1 or higher)
#
# ROA and Delegate Certificate Times
#
# Krill will issue ROAs, and child CA certificates if you have delegated
# resources to child CAs, with a "not after" time of 52 weeks from issuance,
# and it will re-issue those ROAs and certificates 4 weeks before they would
# expire.
#
# Because of the automatic renewal there should be no real need to use
# longer validity times. In fact using longer times could have a negative
# impact on Validator performance because the Certificate Revocation Lists
# would become bigger.
#
# So, we do NOT recommend overriding the following values, except perhaps
# for testing purposes:
# timing_child_certificate_valid_weeks = 52
# timing_child_certificate_reissue_weeks_before = 4
# timing_roa_valid_weeks = 52
# timing_roa_reissue_weeks_before = 4