Struct AdaptConfigCx 

pub struct AdaptConfigCx<'a: 'b, 'b> { /* private fields */ }

A ConfigCx with embedded Id

NOTE: this is a temporary design: it may be expanded or integrated with ConfigCx in the future.

Implementations

impl<'a: 'b, 'b> AdaptConfigCx<'a, 'b>

pub fn new(cx: &'b mut ConfigCx<'a>, id: Id) -> Self

Construct

pub fn is_disabled(&self) -> bool

Check whether this widget is disabled

pub fn set_disabled(&mut self, state: bool)

Set/unset disabled status for this widget

pub fn request_timer(&mut self, handle: TimerHandle, delay: Duration)

Schedule a timed update

Widget updates may be used for delayed action. For animation, prefer to use Draw::animate or Self::request_frame_timer.

This widget will receive an update for timer handle at approximately time = now + delay (or possibly a little later due to frame-rate limiters and processing time).

Requesting an update with delay == 0 is valid except from a timer handler where it may cause an infinite loop.

Multiple timer requests with the same id and handle are merged (see TimerHandle documentation).

pub fn request_frame_timer(&mut self, handle: TimerHandle)

Schedule a frame timer update

Widget id will receive Event::Timer with this handle either before or soon after the next frame is drawn.

This may be useful for animations which mutate widget state. Animations which don’t mutate widget state may use Draw::animate instead.

It is expected that handle.earliest() == true (style guide).

Methods from Deref<Target = EventState>

pub fn modifiers(&self) -> ModifiersState

Get the current modifier state

pub fn has_key_focus(&self, w_id: &Id) -> (bool, bool)

Get whether this widget has (key_focus, sel_focus)

• key_focus: implies this widget receives keyboard input
• sel_focus: implies this widget is allowed to select things

Note that key_focus implies sel_focus.

pub fn request_key_focus( &mut self, target: Id, ime: Option<ImePurpose>, source: FocusSource, )

Request keyboard input focus

When granted, the widget will receive Event::KeyFocus followed by Event::Key for each key press / release. Note that this disables translation of key events to Event::Command while key focus is active.

Providing an ImePurpose enables Input Method Editor events (see Event::ImeFocus). TODO: this feature is incomplete; winit does not currently support setting surrounding text.

The source parameter is used by Event::SelFocus.

Key focus implies sel focus (see Self::request_sel_focus) and navigation focus.

pub fn request_sel_focus(&mut self, target: Id, source: FocusSource)

Request selection focus

To prevent multiple simultaneous selections (e.g. of text) in the UI, only widgets with “selection focus” are allowed to select things. Selection focus is implied by character focus. Event::LostSelFocus is sent when selection focus is lost; in this case any existing selection should be cleared.

The source parameter is used by Event::SelFocus.

Selection focus implies navigation focus.

When key focus is lost, Event::LostSelFocus is sent.

pub fn depress_with_key( &mut self, id: impl HasId, code: impl Into<Option<PhysicalKey>>, )

Visually depress a widget via a key code

When a button-like widget is activated by a key it may call this to ensure the widget is visually depressed until the key is released. The widget will not receive a notification of key-release but will be redrawn automatically.

Note that keyboard shortcuts and mnemonics should usually match against the “logical key”. PhysicalKey is used here since the the logical key may be changed by modifier keys.

Does nothing when code is None.

pub fn cancel_ime_focus(&mut self, target: Id)

End Input Method Editor focus on target, if present

pub fn set_ime_cursor_area(&mut self, target: &Id, rect: Rect)

Set IME cursor area

This should be called after receiving Event::ImeFocus, and any time that the rect parameter changes, until Event::LostImeFocus is received.

This sets the text cursor’s area, rect, relative to the widget’s own coordinate space. If never called, then the widget’s whole rect is used.

This does nothing if target does not have IME-enabled input focus.

pub fn has_nav_focus(&self, w_id: &Id) -> bool

Get whether this widget has navigation focus

pub fn nav_focus(&self) -> Option<&Id>

Get the current navigation focus, if any

This is the widget selected by navigating the UI with the Tab key.

Note: changing navigation focus (e.g. via Self::clear_nav_focus, Self::request_nav_focus or Self::next_nav_focus) does not immediately affect the result of this method.

pub fn clear_nav_focus(&mut self)

Clear navigation focus

pub fn request_nav_focus(&mut self, id: Id, source: FocusSource)

Request navigation focus directly

If id already has navigation focus or navigation focus is disabled globally then nothing happens. If widget id supports navigation focus, then it should receive Event::NavFocus; if not then the first supporting ancestor will receive focus.

pub fn next_nav_focus( &mut self, target: impl Into<Option<Id>>, reverse: bool, source: FocusSource, )

Advance the navigation focus

If target == Some(id), this looks for the next widget from id (inclusive) which is navigable. Otherwise where some widget id has nav_focus this looks for the next navigable widget excluding id. If no reference is available, this instead looks for the first navigable widget.

If reverse, instead search for the previous or last navigable widget.

pub fn register_nav_fallback(&mut self, id: Id)

Attempts to set a fallback to receive Event::Command

In case a navigation key is pressed (see Command) but no widget has navigation focus, then, if a fallback has been set, that widget will receive the key via Event::Command.

Only one widget can be a fallback, and the first to set itself wins. This is primarily used to allow scroll-region widgets to respond to navigation keys when no widget has focus.

pub fn is_depressed(&self, w_id: &Id) -> bool

Check whether the given widget is visually depressed

pub fn is_under_mouse(&self, w_id: &Id) -> bool

Get whether the widget is under the mouse cursor

pub fn set_mouse_over_icon(&mut self, icon: CursorIcon)

Set the cursor icon

This is normally called from Events::handle_mouse_over. In other cases, calling this method may be ineffective. The cursor is automatically “unset” when the widget is no longer under the mouse.

See also EventCx::set_grab_cursor: if a mouse grab (PressStart::grab) is active, its icon takes precedence.

pub fn set_grab_depress( &mut self, source: PressSource, target: Option<Id>, ) -> bool

Set a grab’s depress target

When a grab on mouse or touch input is in effect (PressStart::grab), the widget owning the grab may set itself or any other widget as depressed (“pushed down”). Each grab depresses at most one widget, thus setting a new depress target clears any existing target. Initially a grab depresses its owner.

This effect is purely visual. A widget is depressed when one or more grabs targets the widget to depress, or when a keyboard binding is used to activate a widget (for the duration of the key-press).

Assumption: this method will only be called by handlers of a grab (i.e. recipients of Event::PressStart after initiating a successful grab, Event::PressMove or Event::PressEnd).

Queues a redraw and returns true if the depress target changes, otherwise returns false.

pub fn any_grab_on(&self, id: &Id) -> bool

Returns true if there is a mouse or touch grab on id or any descendant of id

pub fn press_velocity(&self, source: PressSource) -> Option<Vec2>

Get velocity of the mouse cursor or a touch

The velocity is calculated at the time this method is called using existing samples of motion.

Where the source is a mouse this always succeeds. For touch events this requires an active grab and is not guaranteed to succeed; currently only a limited number of presses with mode GrabMode::Grab are tracked for velocity.

pub fn send<M>(&mut self, id: Id, msg: M)

where M: Debug + 'static,

Send a message to id

When calling this method, be aware that some widgets use an inner component to handle events, thus calling with the outer widget’s id may not have the desired effect. Layout::try_probe and EventState::next_nav_focus are usually able to find the appropriate event-handling target.

This uses a tree traversal as with event handling, thus ancestors will have a chance to handle an unhandled event and any messages on the stack after their child.

Special cases sent as an Event

When M is Command, this will send Event::Command to the widget.

When M is ScrollDelta, this will send Event::Scroll to the widget.

Other messages

The message is pushed to the message stack. The target widget may pop or peek the message from Events::handle_messages.

pub fn send_erased(&mut self, id: Id, msg: Erased)

Push a type-erased message to the stack

This is a lower-level variant of Self::send.

pub fn send_async<Fut, M>(&mut self, id: Id, fut: Fut)

where Fut: IntoFuture<Output = M> + 'static, M: Debug + 'static,

Send a message to id via a Future

The future is polled after event handling and after drawing and is able to wake the event loop. This future is executed on the main thread; for high-CPU tasks use [Self::send_spawn] instead.

The future must resolve to a message on completion. Its message is then sent to id via stack traversal identically to Self::send.

pub fn send_async_erased<Fut>(&mut self, id: Id, fut: Fut)

where Fut: IntoFuture<Output = Erased> + 'static,

Send a type-erased message to id via a Future

This is a low-level variant of Self::send_async.

pub fn request_timer(&mut self, id: Id, handle: TimerHandle, delay: Duration)

Schedule a timed update

Widget updates may be used for delayed action. For animation, prefer to use Draw::animate or Self::request_frame_timer.

Widget id will receive Event::Timer with this handle at approximately time = now + delay (or possibly a little later due to frame-rate limiters and processing time).

Requesting an update with delay == 0 is valid, except from an Event::Timer handler (where it may cause an infinite loop).

Multiple timer requests with the same id and handle are merged (see TimerHandle documentation).

pub fn request_frame_timer(&mut self, id: Id, handle: TimerHandle)

Schedule a frame timer update

Widget id will receive Event::Timer with this handle either before or soon after the next frame is drawn.

This may be useful for animations which mutate widget state. Animations which don’t mutate widget state may use Draw::animate instead.

It is expected that handle.earliest() == true (style guide).

pub fn platform(&self) -> Platform

Get the platform

pub fn window_has_focus(&self) -> bool

True when the window has focus

pub fn is_disabled(&self, w_id: &Id) -> bool

Check whether a widget is disabled

A widget is disabled if any ancestor is.

pub fn config(&self) -> &WindowConfig

Access event-handling configuration

pub fn config_enable_pan(&self, source: PressSource) -> bool

Is mouse panning enabled?

pub fn config_enable_mouse_text_pan(&self) -> bool

Is mouse text panning enabled?

pub fn config_test_pan_thresh(&self, dist: Offset) -> bool

Test pan threshold against config, adjusted for scale factor

Returns true when dist is large enough to switch to pan mode.

pub fn change_config(&mut self, msg: ConfigMsg)

Update event configuration

pub fn set_disabled(&mut self, target: Id, disable: bool)

Set/unset a widget as disabled

Disabled status applies to all descendants and blocks reception of events (Unused is returned automatically when the recipient or any ancestor is disabled).

Disabling a widget clears navigation, selection and key focus when the target is disabled, and also cancels press/pan grabs.

pub fn redraw(&mut self, id: impl HasId)

Notify that a widget must be redrawn

This is equivalent to calling Self::action with Action::REDRAW.

pub fn resize(&mut self, id: impl HasId)

Notify that a widget must be resized

This is equivalent to calling Self::action with Action::RESIZE.

pub fn region_moved(&mut self)

Notify that widgets under self may have moved

pub fn exit(&mut self)

Terminate the GUI

pub fn action(&mut self, id: impl HasId, action: Action)

Notify that an Action should happen

This causes the given action to happen after event handling.

Whenever a widget is added, removed or replaced, a reconfigure action is required. Should a widget’s size requirements change, these will only affect the UI after a reconfigure action.

pub fn window_action(&mut self, action: Action)

Notify that an Action should happen for the whole window

Using Self::action with a widget id instead of this method is potentially more efficient (supports future optimisations), but not always possible.

pub fn request_update(&mut self, id: Id)

Request update to widget id

This will call Events::update on id.

Trait Implementations

impl<'a: 'b, 'b> Deref for AdaptConfigCx<'a, 'b>

type Target = &'b mut ConfigCx<'a>

The resulting type after dereferencing.

fn deref(&self) -> &Self::Target

Dereferences the value.

impl<'a: 'b, 'b> DerefMut for AdaptConfigCx<'a, 'b>

fn deref_mut(&mut self) -> &mut Self::Target

Mutably dereferences the value.