k210-hal 0.2.0

use core::mem;

#[derive(Copy, Clone)]
#[allow(non_camel_case_types)]
#[allow(dead_code)]
#[repr(u8)]
pub enum Function {
    JTAG_TCLK = 0,        /* JTAG Test Clock */
    JTAG_TDI = 1,         /* JTAG Test Data In */
    JTAG_TMS = 2,         /* JTAG Test Mode Select */
    JTAG_TDO = 3,         /* JTAG Test Data Out */
    SPI0_D0 = 4,          /* SPI0 Data 0 */
    SPI0_D1 = 5,          /* SPI0 Data 1 */
    SPI0_D2 = 6,          /* SPI0 Data 2 */
    SPI0_D3 = 7,          /* SPI0 Data 3 */
    SPI0_D4 = 8,          /* SPI0 Data 4 */
    SPI0_D5 = 9,          /* SPI0 Data 5 */
    SPI0_D6 = 10,         /* SPI0 Data 6 */
    SPI0_D7 = 11,         /* SPI0 Data 7 */
    SPI0_SS0 = 12,        /* SPI0 Chip Select 0 */
    SPI0_SS1 = 13,        /* SPI0 Chip Select 1 */
    SPI0_SS2 = 14,        /* SPI0 Chip Select 2 */
    SPI0_SS3 = 15,        /* SPI0 Chip Select 3 */
    SPI0_ARB = 16,        /* SPI0 Arbitration */
    SPI0_SCLK = 17,       /* SPI0 Serial Clock */
    UARTHS_RX = 18,       /* UART High speed Receiver */
    UARTHS_TX = 19,       /* UART High speed Transmitter */
    RESV6 = 20,           /* Reserved function */
    RESV7 = 21,           /* Reserved function */
    CLK_SPI1 = 22,        /* Clock SPI1 */
    CLK_I2C1 = 23,        /* Clock I2C1 */
    GPIOHS0 = 24,         /* GPIO High speed 0 */
    GPIOHS1 = 25,         /* GPIO High speed 1 */
    GPIOHS2 = 26,         /* GPIO High speed 2 */
    GPIOHS3 = 27,         /* GPIO High speed 3 */
    GPIOHS4 = 28,         /* GPIO High speed 4 */
    GPIOHS5 = 29,         /* GPIO High speed 5 */
    GPIOHS6 = 30,         /* GPIO High speed 6 */
    GPIOHS7 = 31,         /* GPIO High speed 7 */
    GPIOHS8 = 32,         /* GPIO High speed 8 */
    GPIOHS9 = 33,         /* GPIO High speed 9 */
    GPIOHS10 = 34,        /* GPIO High speed 10 */
    GPIOHS11 = 35,        /* GPIO High speed 11 */
    GPIOHS12 = 36,        /* GPIO High speed 12 */
    GPIOHS13 = 37,        /* GPIO High speed 13 */
    GPIOHS14 = 38,        /* GPIO High speed 14 */
    GPIOHS15 = 39,        /* GPIO High speed 15 */
    GPIOHS16 = 40,        /* GPIO High speed 16 */
    GPIOHS17 = 41,        /* GPIO High speed 17 */
    GPIOHS18 = 42,        /* GPIO High speed 18 */
    GPIOHS19 = 43,        /* GPIO High speed 19 */
    GPIOHS20 = 44,        /* GPIO High speed 20 */
    GPIOHS21 = 45,        /* GPIO High speed 21 */
    GPIOHS22 = 46,        /* GPIO High speed 22 */
    GPIOHS23 = 47,        /* GPIO High speed 23 */
    GPIOHS24 = 48,        /* GPIO High speed 24 */
    GPIOHS25 = 49,        /* GPIO High speed 25 */
    GPIOHS26 = 50,        /* GPIO High speed 26 */
    GPIOHS27 = 51,        /* GPIO High speed 27 */
    GPIOHS28 = 52,        /* GPIO High speed 28 */
    GPIOHS29 = 53,        /* GPIO High speed 29 */
    GPIOHS30 = 54,        /* GPIO High speed 30 */
    GPIOHS31 = 55,        /* GPIO High speed 31 */
    GPIO0 = 56,           /* GPIO pin 0 */
    GPIO1 = 57,           /* GPIO pin 1 */
    GPIO2 = 58,           /* GPIO pin 2 */
    GPIO3 = 59,           /* GPIO pin 3 */
    GPIO4 = 60,           /* GPIO pin 4 */
    GPIO5 = 61,           /* GPIO pin 5 */
    GPIO6 = 62,           /* GPIO pin 6 */
    GPIO7 = 63,           /* GPIO pin 7 */
    UART1_RX = 64,        /* UART1 Receiver */
    UART1_TX = 65,        /* UART1 Transmitter */
    UART2_RX = 66,        /* UART2 Receiver */
    UART2_TX = 67,        /* UART2 Transmitter */
    UART3_RX = 68,        /* UART3 Receiver */
    UART3_TX = 69,        /* UART3 Transmitter */
    SPI1_D0 = 70,         /* SPI1 Data 0 */
    SPI1_D1 = 71,         /* SPI1 Data 1 */
    SPI1_D2 = 72,         /* SPI1 Data 2 */
    SPI1_D3 = 73,         /* SPI1 Data 3 */
    SPI1_D4 = 74,         /* SPI1 Data 4 */
    SPI1_D5 = 75,         /* SPI1 Data 5 */
    SPI1_D6 = 76,         /* SPI1 Data 6 */
    SPI1_D7 = 77,         /* SPI1 Data 7 */
    SPI1_SS0 = 78,        /* SPI1 Chip Select 0 */
    SPI1_SS1 = 79,        /* SPI1 Chip Select 1 */
    SPI1_SS2 = 80,        /* SPI1 Chip Select 2 */
    SPI1_SS3 = 81,        /* SPI1 Chip Select 3 */
    SPI1_ARB = 82,        /* SPI1 Arbitration */
    SPI1_SCLK = 83,       /* SPI1 Serial Clock */
    SPI_SLAVE_D0 = 84,    /* SPI Slave Data 0 */
    SPI_SLAVE_SS = 85,    /* SPI Slave Select */
    SPI_SLAVE_SCLK = 86,  /* SPI Slave Serial Clock */
    I2S0_MCLK = 87,       /* I2S0 Master Clock */
    I2S0_SCLK = 88,       /* I2S0 Serial Clock(BCLK) */
    I2S0_WS = 89,         /* I2S0 Word Select(LRCLK) */
    I2S0_IN_D0 = 90,      /* I2S0 Serial Data Input 0 */
    I2S0_IN_D1 = 91,      /* I2S0 Serial Data Input 1 */
    I2S0_IN_D2 = 92,      /* I2S0 Serial Data Input 2 */
    I2S0_IN_D3 = 93,      /* I2S0 Serial Data Input 3 */
    I2S0_OUT_D0 = 94,     /* I2S0 Serial Data Output 0 */
    I2S0_OUT_D1 = 95,     /* I2S0 Serial Data Output 1 */
    I2S0_OUT_D2 = 96,     /* I2S0 Serial Data Output 2 */
    I2S0_OUT_D3 = 97,     /* I2S0 Serial Data Output 3 */
    I2S1_MCLK = 98,       /* I2S1 Master Clock */
    I2S1_SCLK = 99,       /* I2S1 Serial Clock(BCLK) */
    I2S1_WS = 100,        /* I2S1 Word Select(LRCLK) */
    I2S1_IN_D0 = 101,     /* I2S1 Serial Data Input 0 */
    I2S1_IN_D1 = 102,     /* I2S1 Serial Data Input 1 */
    I2S1_IN_D2 = 103,     /* I2S1 Serial Data Input 2 */
    I2S1_IN_D3 = 104,     /* I2S1 Serial Data Input 3 */
    I2S1_OUT_D0 = 105,    /* I2S1 Serial Data Output 0 */
    I2S1_OUT_D1 = 106,    /* I2S1 Serial Data Output 1 */
    I2S1_OUT_D2 = 107,    /* I2S1 Serial Data Output 2 */
    I2S1_OUT_D3 = 108,    /* I2S1 Serial Data Output 3 */
    I2S2_MCLK = 109,      /* I2S2 Master Clock */
    I2S2_SCLK = 110,      /* I2S2 Serial Clock(BCLK) */
    I2S2_WS = 111,        /* I2S2 Word Select(LRCLK) */
    I2S2_IN_D0 = 112,     /* I2S2 Serial Data Input 0 */
    I2S2_IN_D1 = 113,     /* I2S2 Serial Data Input 1 */
    I2S2_IN_D2 = 114,     /* I2S2 Serial Data Input 2 */
    I2S2_IN_D3 = 115,     /* I2S2 Serial Data Input 3 */
    I2S2_OUT_D0 = 116,    /* I2S2 Serial Data Output 0 */
    I2S2_OUT_D1 = 117,    /* I2S2 Serial Data Output 1 */
    I2S2_OUT_D2 = 118,    /* I2S2 Serial Data Output 2 */
    I2S2_OUT_D3 = 119,    /* I2S2 Serial Data Output 3 */
    RESV0 = 120,          /* Reserved function */
    RESV1 = 121,          /* Reserved function */
    RESV2 = 122,          /* Reserved function */
    RESV3 = 123,          /* Reserved function */
    RESV4 = 124,          /* Reserved function */
    RESV5 = 125,          /* Reserved function */
    I2C0_SCLK = 126,      /* I2C0 Serial Clock */
    I2C0_SDA = 127,       /* I2C0 Serial Data */
    I2C1_SCLK = 128,      /* I2C1 Serial Clock */
    I2C1_SDA = 129,       /* I2C1 Serial Data */
    I2C2_SCLK = 130,      /* I2C2 Serial Clock */
    I2C2_SDA = 131,       /* I2C2 Serial Data */
    CMOS_XCLK = 132,      /* DVP System Clock */
    CMOS_RST = 133,       /* DVP System Reset */
    CMOS_PWDN = 134,      /* DVP Power Down Mode */
    CMOS_VSYNC = 135,     /* DVP Vertical Sync */
    CMOS_HREF = 136,      /* DVP Horizontal Reference output */
    CMOS_PCLK = 137,      /* Pixel Clock */
    CMOS_D0 = 138,        /* Data Bit 0 */
    CMOS_D1 = 139,        /* Data Bit 1 */
    CMOS_D2 = 140,        /* Data Bit 2 */
    CMOS_D3 = 141,        /* Data Bit 3 */
    CMOS_D4 = 142,        /* Data Bit 4 */
    CMOS_D5 = 143,        /* Data Bit 5 */
    CMOS_D6 = 144,        /* Data Bit 6 */
    CMOS_D7 = 145,        /* Data Bit 7 */
    SCCB_SCLK = 146,      /* SCCB Serial Clock */
    SCCB_SDA = 147,       /* SCCB Serial Data */
    UART1_CTS = 148,      /* UART1 Clear To Send */
    UART1_DSR = 149,      /* UART1 Data Set Ready */
    UART1_DCD = 150,      /* UART1 Data Carrier Detect */
    UART1_RI = 151,       /* UART1 Ring Indicator */
    UART1_SIR_IN = 152,   /* UART1 Serial Infrared Input */
    UART1_DTR = 153,      /* UART1 Data Terminal Ready */
    UART1_RTS = 154,      /* UART1 Request To Send */
    UART1_OUT2 = 155,     /* UART1 User-designated Output 2 */
    UART1_OUT1 = 156,     /* UART1 User-designated Output 1 */
    UART1_SIR_OUT = 157,  /* UART1 Serial Infrared Output */
    UART1_BAUD = 158,     /* UART1 Transmit Clock Output */
    UART1_RE = 159,       /* UART1 Receiver Output Enable */
    UART1_DE = 160,       /* UART1 Driver Output Enable */
    UART1_RS485_EN = 161, /* UART1 RS485 Enable */
    UART2_CTS = 162,      /* UART2 Clear To Send */
    UART2_DSR = 163,      /* UART2 Data Set Ready */
    UART2_DCD = 164,      /* UART2 Data Carrier Detect */
    UART2_RI = 165,       /* UART2 Ring Indicator */
    UART2_SIR_IN = 166,   /* UART2 Serial Infrared Input */
    UART2_DTR = 167,      /* UART2 Data Terminal Ready */
    UART2_RTS = 168,      /* UART2 Request To Send */
    UART2_OUT2 = 169,     /* UART2 User-designated Output 2 */
    UART2_OUT1 = 170,     /* UART2 User-designated Output 1 */
    UART2_SIR_OUT = 171,  /* UART2 Serial Infrared Output */
    UART2_BAUD = 172,     /* UART2 Transmit Clock Output */
    UART2_RE = 173,       /* UART2 Receiver Output Enable */
    UART2_DE = 174,       /* UART2 Driver Output Enable */
    UART2_RS485_EN = 175, /* UART2 RS485 Enable */
    UART3_CTS = 176,      /* UART3 Clear To Send */
    UART3_DSR = 177,      /* UART3 Data Set Ready */
    UART3_DCD = 178,      /* UART3 Data Carrier Detect */
    UART3_RI = 179,       /* UART3 Ring Indicator */
    UART3_SIR_IN = 180,   /* UART3 Serial Infrared Input */
    UART3_DTR = 181,      /* UART3 Data Terminal Ready */
    UART3_RTS = 182,      /* UART3 Request To Send */
    UART3_OUT2 = 183,     /* UART3 User-designated Output 2 */
    UART3_OUT1 = 184,     /* UART3 User-designated Output 1 */
    UART3_SIR_OUT = 185,  /* UART3 Serial Infrared Output */
    UART3_BAUD = 186,     /* UART3 Transmit Clock Output */
    UART3_RE = 187,       /* UART3 Receiver Output Enable */
    UART3_DE = 188,       /* UART3 Driver Output Enable */
    UART3_RS485_EN = 189, /* UART3 RS485 Enable */
    TIMER0_TOGGLE1 = 190, /* TIMER0 Toggle Output 1 */
    TIMER0_TOGGLE2 = 191, /* TIMER0 Toggle Output 2 */
    TIMER0_TOGGLE3 = 192, /* TIMER0 Toggle Output 3 */
    TIMER0_TOGGLE4 = 193, /* TIMER0 Toggle Output 4 */
    TIMER1_TOGGLE1 = 194, /* TIMER1 Toggle Output 1 */
    TIMER1_TOGGLE2 = 195, /* TIMER1 Toggle Output 2 */
    TIMER1_TOGGLE3 = 196, /* TIMER1 Toggle Output 3 */
    TIMER1_TOGGLE4 = 197, /* TIMER1 Toggle Output 4 */
    TIMER2_TOGGLE1 = 198, /* TIMER2 Toggle Output 1 */
    TIMER2_TOGGLE2 = 199, /* TIMER2 Toggle Output 2 */
    TIMER2_TOGGLE3 = 200, /* TIMER2 Toggle Output 3 */
    TIMER2_TOGGLE4 = 201, /* TIMER2 Toggle Output 4 */
    CLK_SPI2 = 202,       /* Clock SPI2 */
    CLK_I2C2 = 203,       /* Clock I2C2 */
    INTERNAL0 = 204,      /* Internal function signal 0 */
    INTERNAL1 = 205,      /* Internal function signal 1 */
    INTERNAL2 = 206,      /* Internal function signal 2 */
    INTERNAL3 = 207,      /* Internal function signal 3 */
    INTERNAL4 = 208,      /* Internal function signal 4 */
    INTERNAL5 = 209,      /* Internal function signal 5 */
    INTERNAL6 = 210,      /* Internal function signal 6 */
    INTERNAL7 = 211,      /* Internal function signal 7 */
    INTERNAL8 = 212,      /* Internal function signal 8 */
    INTERNAL9 = 213,      /* Internal function signal 9 */
    INTERNAL10 = 214,     /* Internal function signal 10 */
    INTERNAL11 = 215,     /* Internal function signal 11 */
    INTERNAL12 = 216,     /* Internal function signal 12 */
    INTERNAL13 = 217,     /* Internal function signal 13 */
    INTERNAL14 = 218,     /* Internal function signal 14 */
    INTERNAL15 = 219,     /* Internal function signal 15 */
    INTERNAL16 = 220,     /* Internal function signal 16 */
    INTERNAL17 = 221,     /* Internal function signal 17 */
    CONSTANT = 222,       /* Constant function */
    INTERNAL18 = 223,     /* Internal function signal 18 */
    DEBUG0 = 224,         /* Debug function 0 */
    DEBUG1 = 225,         /* Debug function 1 */
    DEBUG2 = 226,         /* Debug function 2 */
    DEBUG3 = 227,         /* Debug function 3 */
    DEBUG4 = 228,         /* Debug function 4 */
    DEBUG5 = 229,         /* Debug function 5 */
    DEBUG6 = 230,         /* Debug function 6 */
    DEBUG7 = 231,         /* Debug function 7 */
    DEBUG8 = 232,         /* Debug function 8 */
    DEBUG9 = 233,         /* Debug function 9 */
    DEBUG10 = 234,        /* Debug function 10 */
    DEBUG11 = 235,        /* Debug function 11 */
    DEBUG12 = 236,        /* Debug function 12 */
    DEBUG13 = 237,        /* Debug function 13 */
    DEBUG14 = 238,        /* Debug function 14 */
    DEBUG15 = 239,        /* Debug function 15 */
    DEBUG16 = 240,        /* Debug function 16 */
    DEBUG17 = 241,        /* Debug function 17 */
    DEBUG18 = 242,        /* Debug function 18 */
    DEBUG19 = 243,        /* Debug function 19 */
    DEBUG20 = 244,        /* Debug function 20 */
    DEBUG21 = 245,        /* Debug function 21 */
    DEBUG22 = 246,        /* Debug function 22 */
    DEBUG23 = 247,        /* Debug function 23 */
    DEBUG24 = 248,        /* Debug function 24 */
    DEBUG25 = 249,        /* Debug function 25 */
    DEBUG26 = 250,        /* Debug function 26 */
    DEBUG27 = 251,        /* Debug function 27 */
    DEBUG28 = 252,        /* Debug function 28 */
    DEBUG29 = 253,        /* Debug function 29 */
    DEBUG30 = 254,        /* Debug function 30 */
    DEBUG31 = 255,        /* Debug function 31 */
}

impl Function {
    /** GPIOHS pin to function */
    pub fn gpiohs(num: u8) -> Function {
        use Function::*;
        match num {
            0 => GPIOHS0,
            1 => GPIOHS1,
            2 => GPIOHS2,
            3 => GPIOHS3,
            4 => GPIOHS4,
            5 => GPIOHS5,
            6 => GPIOHS6,
            7 => GPIOHS7,
            8 => GPIOHS8,
            9 => GPIOHS9,
            10 => GPIOHS10,
            11 => GPIOHS11,
            12 => GPIOHS12,
            13 => GPIOHS13,
            14 => GPIOHS14,
            15 => GPIOHS15,
            16 => GPIOHS16,
            17 => GPIOHS17,
            18 => GPIOHS18,
            19 => GPIOHS19,
            20 => GPIOHS20,
            21 => GPIOHS21,
            22 => GPIOHS22,
            23 => GPIOHS23,
            24 => GPIOHS24,
            25 => GPIOHS25,
            26 => GPIOHS26,
            27 => GPIOHS27,
            28 => GPIOHS28,
            29 => GPIOHS29,
            30 => GPIOHS30,
            31 => GPIOHS31,
            _ => panic!("no such GPIO pin"),
        }
    }

    pub fn uart(num: u8, func: UartFunction) -> Self {
        assert!(1 <= num && num <= 3);

        let index = num - 1;
        let value = match func {
            UartFunction::CTS       => Function::UART1_CTS      as u8 + index * 14,
            UartFunction::DSR       => Function::UART1_DSR      as u8 + index * 14,
            UartFunction::DCD       => Function::UART1_DCD      as u8 + index * 14,
            UartFunction::RI        => Function::UART1_RI       as u8 + index * 14,
            UartFunction::SIR_IN    => Function::UART1_SIR_IN   as u8 + index * 14,
            UartFunction::DTR       => Function::UART1_DTR      as u8 + index * 14,
            UartFunction::RTS       => Function::UART1_RTS      as u8 + index * 14,
            UartFunction::OUT2      => Function::UART1_OUT2     as u8 + index * 14,
            UartFunction::OUT1      => Function::UART1_OUT1     as u8 + index * 14,
            UartFunction::SIR_OUT   => Function::UART1_SIR_OUT  as u8 + index * 14,
            UartFunction::BAUD      => Function::UART1_BAUD     as u8 + index * 14,
            UartFunction::RE        => Function::UART1_RE       as u8 + index * 14,
            UartFunction::DE        => Function::UART1_DE       as u8 + index * 14,
            UartFunction::RS485_EN  => Function::UART1_RS485_EN as u8 + index * 14,
            UartFunction::RX        => Function::UART1_RX       as u8 + index * 2,
            UartFunction::TX        => Function::UART1_TX       as u8 + index * 2,
        };
        unsafe { mem::transmute(value) }
    }
}

#[allow(non_camel_case_types)]
#[derive(Copy, Clone)]
pub enum UartFunction {
    CTS,        /* UART Clear To Send */
    DSR,        /* UART Data Set Ready */
    DCD,        /* UART Data Carrier Detect */
    RI,         /* UART Ring Indicator */
    SIR_IN,     /* UART Serial Infrared Input */
    DTR,        /* UART Data Terminal Ready */
    RTS,        /* UART Request To Send */
    OUT2,       /* UART User-designated Output 2 */
    OUT1,       /* UART User-designated Output 1 */
    SIR_OUT,    /* UART Serial Infrared Output */
    BAUD,       /* UART Transmit Clock Output */
    RE,         /* UART Receiver Output Enable */
    DE,         /* UART Driver Output Enable */
    RS485_EN,   /* UART RS485 Enable */
    RX,         /* UART Receiver */
    TX,         /* UART Transmitter */
}

#[derive(Copy, Clone)]
pub enum Pull {
    /** No Pull */
    NONE,
    /** Pull Down */
    DOWN,
    /** Pull Up */
    UP,
}

/** Defaults per function (from Kendryte fpioa.c) */
#[cfg_attr(rustfmt, rustfmt_skip)]
static FUNCTION_DEFAULTS: &[u32] = &[
    0x00900000, 0x00900001, 0x00900002, 0x00001f03, 0x00b03f04, 0x00b03f05, 0x00b03f06, 0x00b03f07,
    0x00b03f08, 0x00b03f09, 0x00b03f0a, 0x00b03f0b, 0x00001f0c, 0x00001f0d, 0x00001f0e, 0x00001f0f,
    0x03900010, 0x00001f11, 0x00900012, 0x00001f13, 0x00900014, 0x00900015, 0x00001f16, 0x00001f17,
    0x00901f18, 0x00901f19, 0x00901f1a, 0x00901f1b, 0x00901f1c, 0x00901f1d, 0x00901f1e, 0x00901f1f,
    0x00901f20, 0x00901f21, 0x00901f22, 0x00901f23, 0x00901f24, 0x00901f25, 0x00901f26, 0x00901f27,
    0x00901f28, 0x00901f29, 0x00901f2a, 0x00901f2b, 0x00901f2c, 0x00901f2d, 0x00901f2e, 0x00901f2f,
    0x00901f30, 0x00901f31, 0x00901f32, 0x00901f33, 0x00901f34, 0x00901f35, 0x00901f36, 0x00901f37,
    0x00901f38, 0x00901f39, 0x00901f3a, 0x00901f3b, 0x00901f3c, 0x00901f3d, 0x00901f3e, 0x00901f3f,
    0x00900040, 0x00001f41, 0x00900042, 0x00001f43, 0x00900044, 0x00001f45, 0x00b03f46, 0x00b03f47,
    0x00b03f48, 0x00b03f49, 0x00b03f4a, 0x00b03f4b, 0x00b03f4c, 0x00b03f4d, 0x00001f4e, 0x00001f4f,
    0x00001f50, 0x00001f51, 0x03900052, 0x00001f53, 0x00b03f54, 0x00900055, 0x00900056, 0x00001f57,
    0x00001f58, 0x00001f59, 0x0090005a, 0x0090005b, 0x0090005c, 0x0090005d, 0x00001f5e, 0x00001f5f,
    0x00001f60, 0x00001f61, 0x00001f62, 0x00001f63, 0x00001f64, 0x00900065, 0x00900066, 0x00900067,
    0x00900068, 0x00001f69, 0x00001f6a, 0x00001f6b, 0x00001f6c, 0x00001f6d, 0x00001f6e, 0x00001f6f,
    0x00900070, 0x00900071, 0x00900072, 0x00900073, 0x00001f74, 0x00001f75, 0x00001f76, 0x00001f77,
    0x00000078, 0x00000079, 0x0000007a, 0x0000007b, 0x0000007c, 0x0000007d, 0x0099107e, 0x0099107f,
    0x00991080, 0x00991081, 0x00991082, 0x00991083, 0x00001f84, 0x00001f85, 0x00001f86, 0x00900087,
    0x00900088, 0x00900089, 0x0090008a, 0x0090008b, 0x0090008c, 0x0090008d, 0x0090008e, 0x0090008f,
    0x00900090, 0x00900091, 0x00993092, 0x00993093, 0x00900094, 0x00900095, 0x00900096, 0x00900097,
    0x00900098, 0x00001f99, 0x00001f9a, 0x00001f9b, 0x00001f9c, 0x00001f9d, 0x00001f9e, 0x00001f9f,
    0x00001fa0, 0x00001fa1, 0x009000a2, 0x009000a3, 0x009000a4, 0x009000a5, 0x009000a6, 0x00001fa7,
    0x00001fa8, 0x00001fa9, 0x00001faa, 0x00001fab, 0x00001fac, 0x00001fad, 0x00001fae, 0x00001faf,
    0x009000b0, 0x009000b1, 0x009000b2, 0x009000b3, 0x009000b4, 0x00001fb5, 0x00001fb6, 0x00001fb7,
    0x00001fb8, 0x00001fb9, 0x00001fba, 0x00001fbb, 0x00001fbc, 0x00001fbd, 0x00001fbe, 0x00001fbf,
    0x00001fc0, 0x00001fc1, 0x00001fc2, 0x00001fc3, 0x00001fc4, 0x00001fc5, 0x00001fc6, 0x00001fc7,
    0x00001fc8, 0x00001fc9, 0x00001fca, 0x00001fcb, 0x00001fcc, 0x00001fcd, 0x00001fce, 0x00001fcf,
    0x00001fd0, 0x00001fd1, 0x00001fd2, 0x00001fd3, 0x00001fd4, 0x009000d5, 0x009000d6, 0x009000d7,
    0x009000d8, 0x009100d9, 0x00991fda, 0x009000db, 0x009000dc, 0x009000dd, 0x000000de, 0x009000df,
    0x00001fe0, 0x00001fe1, 0x00001fe2, 0x00001fe3, 0x00001fe4, 0x00001fe5, 0x00001fe6, 0x00001fe7,
    0x00001fe8, 0x00001fe9, 0x00001fea, 0x00001feb, 0x00001fec, 0x00001fed, 0x00001fee, 0x00001fef,
    0x00001ff0, 0x00001ff1, 0x00001ff2, 0x00001ff3, 0x00001ff4, 0x00001ff5, 0x00001ff6, 0x00001ff7,
    0x00001ff8, 0x00001ff9, 0x00001ffa, 0x00001ffb, 0x00001ffc, 0x00001ffd, 0x00001ffe, 0x00001fff,
];

pub fn set_function<N: Into<usize>>(number: N, function: Function) {
    // TODO: check for overlapping assignments and assign to RESV0 as the Kendryte SDK does?
    unsafe {
        let fpioa = &*k210_pac::FPIOA::ptr();
        fpioa.io[number.into()].write(|w| w.bits(FUNCTION_DEFAULTS[function as usize]));
    }
}

pub fn clear_function<N: Into<usize>>(number: N) {
    set_function(number, Function::RESV0);
}

pub fn set_io_pull<N: Into<usize>>(number: N, pull: Pull) {
    unsafe {
        let fpioa = &*k210_pac::FPIOA::ptr();
        fpioa.io[number.into()].modify(|_, w| match pull {
            Pull::NONE => w.pu().bit(false).pd().bit(false),
            Pull::DOWN => w.pu().bit(false).pd().bit(true),
            Pull::UP => w.pu().bit(true).pd().bit(false),
        });
    }
}