justerm-core 0.12.0

//! The decoration-marker surface: engine-owned marks bound to absolute buffer lines,
//! the OSC 133 semantic-command queries built on them, and the three fixups that keep a
//! mark on its content while the buffer moves under it.
//!
//! A marker is the same kind of thing as a selection anchor — an absolute
//! `[scrollback ++ screen]` line index that survives an ordinary scroll and has to be
//! repaired wherever it does not. Three of those repairs are *calls*, and they are the
//! ones here: `markers_shift_below_margin`, `markers_evict_oldest` and
//! `markers_rotate_region` are `pub(super)` because the write path in `term.rs` invokes
//! them, mostly on the line beside their selection counterparts. #584 weighed merging the
//! two surfaces into one module on the strength of that pairing and rejected it; the
//! grounds are recorded there.
//!
//! **What a marker's line does *not* go through is this module.** Four sites outside it
//! also move or drop a marker, and a reader who comes here for "everywhere a marker's
//! coordinate changes" will find none of them: primary reflow rewrites `m.line` in place,
//! alt reflow rewrites *and* disposes, alt-leave drains the alt list, and RIS disposes
//! both. All four live in `term.rs` because #584 put reflow and the write path out of
//! scope, which is a boundary of the epic rather than a property of markers.
//!
//! Two declarations stay in `term.rs`, and neither is forced. `Marker` is the element type
//! of the `normal_markers` / `alt_markers` fields, so it sits with the fields it describes.
//! `CommandLine` could have travelled — `mod term` is private, so `pub use
//! term::markers::CommandLine` would keep `justerm_core::CommandLine` byte-identical — but
//! that edits `lib.rs`, which this slice holds untouched, and the ticket does not name it.
//! A child module reads both without any widening.
//!
//! `primary_grid` *did* travel, though the ticket does not name it either: after
//! `command_lines` moved, nothing in `term.rs` called it. It belongs here because command
//! marks anchor **primary** content — on the alt screen their text must be read from the
//! swapped-out grid, not the active one — which is a marker rule, not a general accessor.
//!
//! Visibility follows the callers. Six items are `pub(super)` because the write path and
//! `frame()` invoke them from `term.rs`; that is not a widening, since an item private to
//! `term` was already visible to `term` and all of its descendants. Six are private —
//! every caller travelled with them. The four entry points are public API and keep
//! `pub fn`: an inherent impl's methods are reached through the type, not the module path,
//! so a private child module does not hide them.

use crate::cell::Cell;
use crate::event::TermEvent;
use crate::grid::Grid;
use crate::serialize::{MarkerId, MarkerKind, MarkerLine, MarkerPosition};

use super::{CommandLine, Marker, Term};

impl Term {
    /// The primary-screen grid, wherever it currently lives — swapped into
    /// `alt_grid` while on the alt screen (#192). Command marks anchor *primary*
    /// content, so extracting their text must read this, not the active grid.
    fn primary_grid(&self) -> &Grid {
        if self.on_alt {
            &self.alt_grid
        } else {
            &self.grid
        }
    }

    /// The active buffer's marker list (#177 S0) — alt while on the alt screen,
    /// else normal. Add/rotate/project operate on this; primary-scoped queries
    /// (`command_marks`/`command_lines`) and scrollback eviction read
    /// `normal_markers` directly.
    fn markers(&self) -> &Vec<Marker> {
        if self.on_alt {
            &self.alt_markers
        } else {
            &self.normal_markers
        }
    }

    /// Mutable [`Self::markers`].
    fn markers_mut(&mut self) -> &mut Vec<Marker> {
        if self.on_alt {
            &mut self.alt_markers
        } else {
            &mut self.normal_markers
        }
    }

    /// Register a decoration marker at viewport `row`, returning its stable id
    /// (#118). The row is resolved to an absolute buffer line (like a selection
    /// anchor), so the marker tracks that content through scroll/eviction/reflow.
    pub fn add_marker(&mut self, row: usize) -> MarkerId {
        // On the alt screen this anchors an *alt-scoped* marker (#187): per-buffer
        // storage (#186) keeps it out of the primary list, and it is disposed on
        // alt-leave — xterm's per-buffer `addMarker` + `clearAllMarkers`. No dead
        // sentinel is needed anymore; `markers_mut` routes to the active buffer.
        let line = self.viewport_to_abs(row, 0).line;
        self.push_marker(line, 0, MarkerKind::Plain)
    }

    /// Push a marker anchored at absolute `(line, col)` with `kind`, returning its
    /// id. The shared core of `add_marker` (viewport row, `col = 0`) and OSC-133
    /// command marks (cursor line + column) — one place owns id allocation + the
    /// `markers` list.
    fn push_marker(&mut self, line: usize, col: usize, kind: MarkerKind) -> MarkerId {
        let id = MarkerId(self.next_marker_id);
        self.next_marker_id += 1;
        self.markers_mut().push(Marker {
            id,
            line,
            col,
            kind,
        });
        id
    }

    /// Record an OSC 133 command-boundary mark at the cursor's current line
    /// (#158). Ignored on the alt screen: unlike the decoration guards that
    /// per-buffer storage retired (#187), this one stands on a *semantic* — OSC
    /// 133 is shell integration, which only runs on the primary screen, so an alt
    /// 133 is meaningless (there is no command to bound). Command nav/announce read
    /// the *normal* buffer's marks (`command_marks`/`command_lines`, primary-scoped
    /// since #186), so even a stray alt 133 could not reach them — but there is no
    /// value in creating an alt-scoped command mark nothing consumes (#188). The
    /// cursor line is `scrollback ++ screen`-absolute, independent of
    /// `display_offset` (the cursor is always in the grid, never scrollback).
    pub(super) fn add_command_mark(&mut self, kind: MarkerKind) {
        if self.on_alt {
            return;
        }
        let line = self.scrollback.len() + self.cursor.row;
        // `cursor.col` alone is one column short whenever the command exactly filled the row: the
        // cursor that has just written the last cell is held *at* `cols - 1` with `pending_wrap`
        // set, because "one past the last column" is not a column (#562). A command mark's column
        // is an **exclusive** bound on the command text, so it wants precisely that unrepresentable
        // value — `extract_lines` clips `[b_col, c_col)` and `.min(cells.len())` absorbs it.
        //
        // Without this, `$ ` + `abcd` at 6 columns recorded `abc`: no resize involved, so this half
        // of #562 was reachable on a screen that never changed size.
        let col = self.cursor.col + usize::from(self.cursor.pending_wrap);
        self.push_marker(line, col, kind);
    }

    /// The OSC 133 command-boundary marks in buffer order — `(id, absolute line,
    /// kind)` (#158). Plain decoration markers (#118) are excluded. The consumer
    /// pairs prompt/command/finished marks and drives navigation/announce policy
    /// (#160); core only parses and anchors them.
    pub fn command_marks(&self) -> Vec<(MarkerId, usize, MarkerKind)> {
        // Primary-scoped: OSC-133 shell integration marks live on the normal
        // buffer, so command nav/announce read it even while on the alt screen.
        self.normal_markers
            .iter()
            .filter(|m| m.kind != MarkerKind::Plain)
            .map(|m| (m.id, m.line, m.kind))
            .collect()
    }

    /// The executed shell commands recovered from OSC-133 marks, in buffer order
    /// (#166) — the data behind screen-reader command navigation. Each
    /// [`CommandLine`] pairs a CommandStart(B) with the following OutputStart(C)
    /// to extract the *typed command* (the prompt before B and the output after C
    /// excluded via the captured columns, VSCode `extractCommandLine` parity), and
    /// attaches the trailing CommandFinished(D) exit. A command still being typed
    /// (B with no C yet) is not navigable — its text has no bound — so it is
    /// omitted until output starts.
    pub fn command_lines(&self) -> Vec<CommandLine> {
        let mut out: Vec<CommandLine> = Vec::new();
        // (B line, B col) awaiting its matching C. Marks arrive in buffer order.
        let mut pending: Option<(usize, usize)> = None;
        // Primary-scoped (see `command_marks`): the normal buffer's marks.
        for m in &self.normal_markers {
            match m.kind {
                MarkerKind::CommandStart => pending = Some((m.line, m.col)),
                MarkerKind::OutputStart => {
                    if let Some((b_line, b_col)) = pending.take() {
                        // Columns bound the command precisely even though output was
                        // written after C — `extract_lines` reads current cells but
                        // clips to `[b_col, c_col)`, excluding both prompt and output.
                        // Command marks anchor primary content — read the primary
                        // grid so the text is right even while on the alt screen (#192).
                        // Where the *typed* command begins, which is not always where B was
                        // emitted: a prompt that ends its row leaves B past that row's content, and
                        // the command really starts on the next line. Normalised **here** rather
                        // than inside `extract_lines`, because the two answers differ by caller —
                        // a selection that starts in a line's trailing blanks does contain the
                        // break that follows, a command does not — and because `doc_line_of` needs
                        // the same value. Feeding it the raw `b_line` reported the command one
                        // document line early, which is the a11y "jump to previous command" target.
                        let (b_line, b_col) =
                            self.command_start(self.primary_grid(), b_line, b_col, m.line);
                        let command =
                            self.extract_lines(self.primary_grid(), b_line, b_col, m.line, m.col);
                        out.push(CommandLine {
                            line: self.doc_line_of(self.primary_grid(), b_line),
                            command,
                            exit: None,
                        });
                    }
                }
                MarkerKind::CommandFinished(exit) => {
                    // The exit belongs to the most recent command not yet closed;
                    // the `is_none` guard stops a stray D from clobbering a code.
                    if let Some(last) = out.last_mut()
                        && last.exit.is_none()
                    {
                        last.exit = exit;
                    }
                }
                MarkerKind::Plain | MarkerKind::PromptStart => {}
            }
        }
        out
    }

    /// Advance an OSC-133 `CommandStart` position past any hard-ended line that holds no command
    /// text at or after it, stopping before `end` (the matching `OutputStart`).
    ///
    /// B is emitted at the cursor, so a prompt that fills — or merely ends — its row leaves the mark
    /// in that row's trailing blanks (#562). Two things then go wrong if the raw position is used:
    /// `extract_lines` selects an empty run and, because the row is hard-ended, flushes it with a
    /// `\n` the command never contained; and `doc_line_of` names the prompt's line rather than the
    /// command's. Both were reachable **without any resize** — the row only has to end before its
    /// width, which an 8-column row holding a 6-column prompt does.
    ///
    /// Only hard-ended rows advance. On a soft-wrapped row the continuation is the same logical
    /// line, its trailing blanks are real content (a space at a wrap boundary was typed), and no
    /// `\n` is flushed there anyway.
    fn command_start(&self, grid: &Grid, line: usize, col: usize, end: usize) -> (usize, usize) {
        let (mut line, mut col) = (line, col);
        while line < end && !self.row_in(grid, line).is_wrapped() {
            let cells = self.line_in(grid, line);
            if col < cells.len() && !cells[col..].iter().all(Cell::is_blank) {
                break;
            }
            line += 1;
            col = 0;
        }
        (line, col)
    }

    /// The document (logical) line index that absolute buffer line `abs` renders
    /// into within [`Term::accessible_text`] — the number of hard line-ends before
    /// it (soft-wrapped rows share one logical line). Primary-screen coordinates,
    /// matching `accessible_text`'s `start = 0` for the primary screen; command
    /// marks are primary-only. O(abs) per call — fine for an on-demand query over
    /// the handful of commands in a session.
    fn doc_line_of(&self, grid: &Grid, abs: usize) -> usize {
        (0..abs)
            .filter(|&l| !self.row_in(grid, l).is_wrapped())
            .count()
    }

    /// Remove a marker by id (#118). Disposing it fires `MarkerDisposed` so the
    /// consumer's cleanup is one path whether the marker left by eviction or by
    /// this explicit call (xterm's `dispose()` likewise always fires onDispose).
    /// A no-op for an unknown/already-disposed id.
    pub fn remove_marker(&mut self, id: MarkerId) {
        // Id-based, buffer-agnostic: search both lists (ids are unique across
        // buffers) so a marker is removed whichever screen it lives on (#177 S0).
        let before = self.normal_markers.len() + self.alt_markers.len();
        self.normal_markers.retain(|m| m.id != id);
        self.alt_markers.retain(|m| m.id != id);
        if self.normal_markers.len() + self.alt_markers.len() != before {
            self.events.push(TermEvent::MarkerDisposed(id));
        }
    }

    /// The marker analogue of `selection_shift_below_margin` (#449) — primary
    /// only, because the accrual branch that needs it is primary-only.
    pub(super) fn markers_shift_below_margin(&mut self, from: usize) {
        for m in &mut self.normal_markers {
            if m.line >= from {
                m.line += 1;
            }
        }
    }

    /// Shift markers down one absolute line after the oldest history line is
    /// evicted; a marker *on* that line (abs 0) has left the buffer, so it is
    /// disposed and announced (#118) — the marker analogue of
    /// `selection_evict_oldest`, but a list with per-marker disposal.
    pub(super) fn markers_evict_oldest(&mut self) {
        // Scrollback eviction is primary-only (the alt screen has none).
        let mut disposed = Vec::new();
        self.normal_markers.retain_mut(|m| {
            if m.line == 0 {
                disposed.push(m.id);
                false
            } else {
                m.line -= 1;
                true
            }
        });
        for id in disposed {
            self.events.push(TermEvent::MarkerDisposed(id));
        }
    }

    /// Rotate markers within an in-screen region scroll of absolute lines
    /// `[top, bottom]` (`up` = a line dropped at `top`, else at `bottom`) — the
    /// marker analogue of `selection_rotate_region`. A marker on the dropped edge
    /// has left the buffer, so it is disposed and announced (#118).
    pub(super) fn markers_rotate_region(&mut self, top: usize, bottom: usize, up: bool) {
        let mut disposed = Vec::new();
        self.markers_mut().retain_mut(|m| {
            if m.line < top || m.line > bottom {
                return true; // outside the region — unchanged
            }
            let dropped_edge = if up { top } else { bottom };
            if m.line == dropped_edge {
                disposed.push(m.id);
                false
            } else {
                m.line = if up { m.line - 1 } else { m.line + 1 };
                true
            }
        });
        for id in disposed {
            self.events.push(TermEvent::MarkerDisposed(id));
        }
    }

    /// The active buffer's markers projected onto the current viewport — one
    /// `MarkerPosition` per marker whose line is visible, off-screen markers
    /// omitted. The alt screen projects its own (alt-scoped) markers now (#187);
    /// they are disposed on alt-leave, so a primary frame never shows them.
    pub(super) fn marker_positions(&self) -> Vec<MarkerPosition> {
        let top = self.scrollback.len() - self.display_offset;
        let rows = self.grid.rows();
        self.markers()
            .iter()
            .filter_map(|m| {
                let row = m.line.checked_sub(top)?;
                (row < rows).then_some(MarkerPosition {
                    id: m.id,
                    row,
                    kind: m.kind,
                })
            })
            .collect()
    }

    /// Every live marker's absolute buffer line (#120 S3) — the off-viewport
    /// superset of `marker_positions`, for the overview ruler. No viewport filter:
    /// a marker scrolled out of view is still reported (that is the ruler's job),
    /// its `line` in the same `[0, scrollback + rows)` frame as the header's
    /// `scrollback_len`/`display_offset`.
    pub(super) fn all_marker_lines(&self) -> Vec<MarkerLine> {
        self.markers()
            .iter()
            .map(|m| MarkerLine {
                id: m.id,
                line: m.line as u32,
            })
            .collect()
    }
}