jmap-base-client 0.4.2

//! [`ClientError`] and the opaque wrapper types ([`HttpError`],
//! [`WebSocketError`], [`InvalidHeaderValueError`], [`ParseError`],
//! [`SerializeError`]) that hide [`reqwest`], [`tokio_tungstenite`], and
//! the underlying JSON parser from this crate's public API.
//!
//! # SemVer policy
//!
//! `reqwest` and `tokio-tungstenite` are **private dependencies** of this
//! crate. Their types do not appear in any public function signature,
//! variant payload, or `From` impl. The wrapper types ([`HttpError`],
//! [`WebSocketError`], [`InvalidHeaderValueError`]) expose a curated set of
//! diagnostic accessors that return primitive types only, so this crate can
//! bump the underlying transport's major version without breaking
//! downstream callers.
//!
//! Internal construction goes through `pub(crate)` helpers on
//! [`ClientError`] (`from_reqwest`, `from_ws`, `from_invalid_header`) —
//! downstream consumers cannot construct the transport-error variants and
//! never need to.
//!
//! # `serde_json` is a partially-wrapped dependency (bd:JMAP-6r7c.26)
//!
//! [`ParseError`] and [`SerializeError`] wrap [`serde_json::Error`] for the
//! [`Parse`](ClientError::Parse) and [`Serialize`](ClientError::Serialize)
//! variant payloads. The wrappers expose only primitive accessors
//! ([`line`](ParseError::line), [`column`](ParseError::column),
//! [`classify`](ParseError::classify) returning the workspace-local
//! [`ParseCategory`] enum), so pattern-matching code on these variants
//! is insulated from a future JSON-parser swap (e.g. `simd-json`,
//! `serde_json_lenient`) — the variant payload type is stable across
//! such a swap.
//!
//! The asymmetry with `HttpError` / `WebSocketError`: extension client
//! crates (`jmap-mail-client`, `jmap-chat-client`, etc.) need to surface
//! their own JSON parse / serialize failures as [`ClientError::Parse`]
//! and [`ClientError::Serialize`], so this crate publishes
//! [`ClientError::from_parse`] and [`ClientError::from_serialize`] as
//! the construction path. Those constructors take a
//! [`serde_json::Error`] in their signature, so `serde_json` remains a
//! transitively-public dependency for crates that call those helpers
//! directly. A future JSON-parser swap would deprecate
//! `from_parse(serde_json::Error)` in favor of an analogous helper for
//! the new parser; the variant payload type ([`ParseError`]) does not
//! change.
//!
//! # Do not simplify the wrappers (bd:JMAP-6r7c.16)
//!
//! A future contributor reading this module may suggest "just put
//! `reqwest::Error` in the variant — downstream users want the full
//! `reqwest` API". That is the wrong simplification. The wrapper-types
//! pattern is load-bearing for five independent reasons; all five must
//! be re-derived from first principles before the wrappers can be
//! removed:
//!
//! 1. **SemVer-bump isolation.** `reqwest::Error` and
//!    `tungstenite::Error` are `#[non_exhaustive]` from third-party
//!    crates that bump major versions independently of this crate.
//!    Exposing them in this crate's public API turns every transitive
//!    `reqwest` major bump into a SemVer break for every downstream
//!    extension client (`jmap-mail-client`, `jmap-chat-client`,
//!    `jmap-calendars-client`, etc., all eight planned extensions).
//! 2. **Transport replaceability.** This crate may swap the HTTP /
//!    WebSocket transport entirely — `ureq`, `hyper-util` directly, a
//!    `curl`-backed transport for an unusual deployment — without
//!    breaking downstream. The only thing downstream binds to is the
//!    wrapper's accessor signature; the wrapped type is private and
//!    can be replaced in-place.
//! 3. **Curated accessor surface.** Not every `reqwest::Error` method
//!    is mirrored. Adding new diagnostic surface (e.g.
//!    `WebSocketError::close_code()`) requires a deliberate
//!    `pub fn` decision in this file, which surfaces in code review.
//!    An unwrapped error would silently grow the surface every
//!    `reqwest` minor release.
//! 4. **Opaque construction.** The `pub(crate) from_reqwest` /
//!    `from_ws` / `from_invalid_header` helpers on `ClientError`
//!    mean downstream cannot construct the transport-error variants
//!    even if they wanted to. That keeps the variants genuinely
//!    opaque — no "well, the public field is a `reqwest::Error`, so
//!    downstream can match on it" loophole.
//! 5. **Workspace policy alignment.** This crate's `AGENTS.md`
//!    "Design Constraints" table documents the wrappers as settled
//!    after bd:JMAP-6lsm.22. The workspace `AGENTS.md` "TLS stack"
//!    rule additionally forbids native-tls / openssl; allowing
//!    `reqwest::Error` to leak would re-couple downstream to the
//!    `reqwest` feature-set decisions this crate has already made.
//!
//! The accessor set on each wrapper is deliberately minimal. Resist
//! requests to "just expose `reqwest::Error`" without re-arguing all
//! five reasons above.

use std::error::Error as StdError;
use std::fmt;
use std::time::{SystemTime, UNIX_EPOCH};

// ---------------------------------------------------------------------------
// HttpError — opaque wrapper around reqwest::Error
// ---------------------------------------------------------------------------

/// HTTP transport error reported by the underlying HTTP client.
///
/// The inner third-party error type is private; callers diagnose the failure
/// via the accessor methods, all of which return primitive types so this
/// crate can swap or bump the underlying HTTP client without breaking the
/// public API.
#[non_exhaustive]
pub struct HttpError(reqwest::Error);

impl HttpError {
    /// `true` if the request timed out before a response was received.
    pub fn is_timeout(&self) -> bool {
        self.0.is_timeout()
    }
    /// `true` if the underlying connection could not be established
    /// (DNS failure, TCP refused, TLS handshake failure, etc.).
    pub fn is_connect(&self) -> bool {
        self.0.is_connect()
    }
    /// `true` if the error originated in the request builder
    /// (URL parse failure, invalid header construction at build time, etc.).
    pub fn is_builder(&self) -> bool {
        self.0.is_builder()
    }
    /// `true` if the error is a redirect-loop or too-many-redirects failure.
    pub fn is_redirect(&self) -> bool {
        self.0.is_redirect()
    }
    /// `true` if the error originated from a non-success HTTP status.
    pub fn is_status(&self) -> bool {
        self.0.is_status()
    }
    /// `true` if the error happened while sending the request body.
    pub fn is_request(&self) -> bool {
        self.0.is_request()
    }
    /// `true` if the error happened while receiving / decoding the response body.
    pub fn is_body(&self) -> bool {
        self.0.is_body()
    }
    /// `true` if the response body could not be decoded as the requested
    /// representation (e.g. JSON parse failure inside the transport layer).
    pub fn is_decode(&self) -> bool {
        self.0.is_decode()
    }
    /// HTTP status code if the error came from a non-success response;
    /// `None` for transport-level failures (timeout, connection refused, etc.).
    pub fn status(&self) -> Option<u16> {
        self.0.status().map(|s| s.as_u16())
    }
    /// URL the request was sent to, if known. Returned as an owned `String`
    /// to avoid leaking the underlying transport's `Url` type into this
    /// crate's public API.
    pub fn url(&self) -> Option<String> {
        self.0.url().map(ToString::to_string)
    }

    /// Classify the error into a single category (bd:JMAP-6r7c.34).
    ///
    /// The 8 [`is_*`](HttpError::is_timeout) boolean accessors are
    /// useful when a caller wants to test for a specific category, but
    /// they leave the caller writing a chained-`if-else` dispatch with
    /// undocumented mutual relationships ("can `is_status` and
    /// `is_decode` both be true?"). This method returns a single
    /// `HttpErrorKind` so a caller can `match` on it once.
    ///
    /// Precedence (highest first) when multiple predicates could
    /// arguably apply: `Timeout`, `Connect`, `Redirect`, `Status`,
    /// `RequestBody`, `ResponseBody`, `Decode`, `Builder`, `Other`.
    /// Status takes precedence over body/decode because reqwest sets
    /// `is_status` precisely when the failure is "the HTTP server
    /// returned a non-success status code"; in that case the body or
    /// decode flag may also be set, but the most-actionable
    /// classification for a caller is the status code itself.
    ///
    /// This method does not return retriability advice — the same
    /// `Status(429)` may be retriable or fatal depending on the
    /// `Retry-After` header value, and the same `Connect` may mean
    /// "DNS not yet warm" (retry) or "host is down" (give up). Make
    /// the retriability decision at the call site, using the kind as
    /// input.
    pub fn kind(&self) -> HttpErrorKind {
        if self.0.is_timeout() {
            HttpErrorKind::Timeout
        } else if self.0.is_connect() {
            HttpErrorKind::Connect
        } else if self.0.is_redirect() {
            HttpErrorKind::Redirect
        } else if let Some(s) = self.0.status() {
            HttpErrorKind::Status(s.as_u16())
        } else if self.0.is_request() {
            HttpErrorKind::RequestBody
        } else if self.0.is_body() {
            HttpErrorKind::ResponseBody
        } else if self.0.is_decode() {
            HttpErrorKind::Decode
        } else if self.0.is_builder() {
            HttpErrorKind::Builder
        } else {
            HttpErrorKind::Other
        }
    }
}

/// Classification of an [`HttpError`] returned by [`HttpError::kind`].
///
/// A coarse partition over the failure modes reqwest reports. Use this
/// when a caller wants to dispatch on the error category in a single
/// `match`; the [`HttpError::is_timeout`] / [`HttpError::is_connect`]
/// boolean accessors remain available for callers that test for one
/// specific category.
///
/// `#[non_exhaustive]` so new variants may be added in minor releases
/// without breaking callers.
#[non_exhaustive]
#[derive(Debug, Clone, PartialEq, Eq, Hash)]
pub enum HttpErrorKind {
    /// Request timed out before a response was received
    /// ([`HttpError::is_timeout`]).
    Timeout,
    /// Underlying connection could not be established — DNS failure,
    /// TCP refused, TLS handshake failure ([`HttpError::is_connect`]).
    Connect,
    /// Redirect loop or too-many-redirects failure
    /// ([`HttpError::is_redirect`]).
    Redirect,
    /// Server returned a non-success HTTP status. The payload is the
    /// status code as `u16` (e.g. `404`, `429`, `503`). 401 / 403 are
    /// not surfaced here — they are caught earlier and produce
    /// [`ClientError::AuthFailed`].
    Status(u16),
    /// Error happened while sending the request body
    /// ([`HttpError::is_request`]).
    RequestBody,
    /// Error happened while receiving the response body
    /// ([`HttpError::is_body`]).
    ResponseBody,
    /// Response body could not be decoded as the requested representation
    /// (e.g. JSON parse failure inside the transport layer)
    /// ([`HttpError::is_decode`]).
    Decode,
    /// Error originated in the request builder — URL parse failure,
    /// invalid header construction at build time, etc.
    /// ([`HttpError::is_builder`]). Indicates a caller bug.
    Builder,
    /// Categorisation did not match any of the predicates above.
    /// May appear for transport-level errors that reqwest reports
    /// without setting any of the typed predicates.
    Other,
}

impl fmt::Display for HttpError {
    fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
        fmt::Display::fmt(&self.0, f)
    }
}

impl fmt::Debug for HttpError {
    fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
        f.debug_tuple("HttpError").field(&self.0).finish()
    }
}

impl StdError for HttpError {
    fn source(&self) -> Option<&(dyn StdError + 'static)> {
        Some(&self.0)
    }
}

// ---------------------------------------------------------------------------
// WebSocketError — opaque wrapper around tokio_tungstenite::tungstenite::Error
// ---------------------------------------------------------------------------

/// WebSocket transport error reported by the underlying WebSocket client.
///
/// As with [`HttpError`], the inner third-party type is private and
/// diagnostics are exposed via accessor methods returning primitive types.
#[non_exhaustive]
pub struct WebSocketError(tokio_tungstenite::tungstenite::Error);

impl WebSocketError {
    /// `true` if the peer cleanly closed the connection.
    pub fn is_connection_closed(&self) -> bool {
        matches!(
            &self.0,
            tokio_tungstenite::tungstenite::Error::ConnectionClosed
        )
    }
    /// `true` if the connection was already closed when the operation was
    /// attempted (caller bug or race).
    pub fn is_already_closed(&self) -> bool {
        matches!(
            &self.0,
            tokio_tungstenite::tungstenite::Error::AlreadyClosed
        )
    }
    /// `true` if the error wraps an underlying `std::io::Error`.
    pub fn is_io(&self) -> bool {
        matches!(&self.0, tokio_tungstenite::tungstenite::Error::Io(_))
    }
    /// `true` if the error is a WebSocket protocol violation
    /// (malformed frame, invalid opcode, etc.).
    pub fn is_protocol(&self) -> bool {
        matches!(&self.0, tokio_tungstenite::tungstenite::Error::Protocol(_))
    }
    /// `true` if a frame or message exceeded a configured size limit.
    pub fn is_capacity(&self) -> bool {
        matches!(&self.0, tokio_tungstenite::tungstenite::Error::Capacity(_))
    }
    /// `true` if the WebSocket URL was invalid.
    pub fn is_url(&self) -> bool {
        matches!(&self.0, tokio_tungstenite::tungstenite::Error::Url(_))
    }

    /// Classify the error into a single category (bd:JMAP-6r7c.34).
    ///
    /// Single-`match` alternative to the 6 [`is_*`](WebSocketError::is_io)
    /// boolean accessors. Returns a [`WebSocketErrorKind`] so a caller
    /// can dispatch on the failure mode without chained-`if-else`.
    ///
    /// Precedence (highest first): `ConnectionClosed`, `AlreadyClosed`,
    /// `Url`, `Protocol`, `Capacity`, `Io`, `Other`. The first three
    /// are exact tungstenite variants and are mutually exclusive;
    /// the remainder follow the `is_*` accessor order from this file.
    /// This method does not return retriability advice — make that
    /// decision at the call site using the kind as input.
    pub fn kind(&self) -> WebSocketErrorKind {
        use tokio_tungstenite::tungstenite::Error as TError;
        match &self.0 {
            TError::ConnectionClosed => WebSocketErrorKind::ConnectionClosed,
            TError::AlreadyClosed => WebSocketErrorKind::AlreadyClosed,
            TError::Url(_) => WebSocketErrorKind::Url,
            TError::Protocol(_) => WebSocketErrorKind::Protocol,
            TError::Capacity(_) => WebSocketErrorKind::Capacity,
            TError::Io(_) => WebSocketErrorKind::Io,
            _ => WebSocketErrorKind::Other,
        }
    }
}

/// Classification of a [`WebSocketError`] returned by [`WebSocketError::kind`].
///
/// `#[non_exhaustive]` so new variants may be added in minor releases
/// without breaking callers.
#[non_exhaustive]
#[derive(Debug, Clone, PartialEq, Eq, Hash)]
pub enum WebSocketErrorKind {
    /// Peer cleanly closed the connection
    /// ([`WebSocketError::is_connection_closed`]).
    ConnectionClosed,
    /// Connection was already closed when the operation was attempted
    /// — caller bug or race ([`WebSocketError::is_already_closed`]).
    AlreadyClosed,
    /// WebSocket URL was invalid ([`WebSocketError::is_url`]).
    Url,
    /// WebSocket protocol violation — malformed frame, invalid opcode,
    /// etc. ([`WebSocketError::is_protocol`]).
    Protocol,
    /// Frame or message exceeded a configured size limit
    /// ([`WebSocketError::is_capacity`]).
    Capacity,
    /// Error wraps an underlying `std::io::Error`
    /// ([`WebSocketError::is_io`]).
    Io,
    /// Categorisation did not match any of the variants above. May
    /// appear for tungstenite error variants not yet covered by this
    /// crate's classification (e.g. `Tls`, `Http`, future additions).
    Other,
}

impl fmt::Display for WebSocketError {
    fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
        fmt::Display::fmt(&self.0, f)
    }
}

impl fmt::Debug for WebSocketError {
    fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
        f.debug_tuple("WebSocketError").field(&self.0).finish()
    }
}

impl StdError for WebSocketError {
    fn source(&self) -> Option<&(dyn StdError + 'static)> {
        Some(&self.0)
    }
}

// ---------------------------------------------------------------------------
// InvalidHeaderValueError — string-only wrapper, no third-party leak
// ---------------------------------------------------------------------------

/// A header value (typically an authentication token) contained bytes that
/// are not valid for an HTTP header.
///
/// The inner type is just a string message; there is no actionable
/// diagnostic state beyond that, so this wrapper does not expose any
/// accessor beyond [`Display`](fmt::Display).
#[non_exhaustive]
pub struct InvalidHeaderValueError {
    message: String,
}

impl InvalidHeaderValueError {
    /// The human-readable description of the failure.
    pub fn message(&self) -> &str {
        &self.message
    }
}

impl fmt::Display for InvalidHeaderValueError {
    fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
        f.write_str(&self.message)
    }
}

impl fmt::Debug for InvalidHeaderValueError {
    fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
        f.debug_struct("InvalidHeaderValueError")
            .field("message", &self.message)
            .finish()
    }
}

impl StdError for InvalidHeaderValueError {}

// ---------------------------------------------------------------------------
// ParseError / SerializeError — opaque wrappers around serde_json::Error
// ---------------------------------------------------------------------------

/// JSON deserialize / parse error reported by the underlying JSON parser.
///
/// The inner third-party error type is private; callers diagnose the
/// failure via the accessor methods on this wrapper, all of which return
/// primitive types or the workspace-local [`ParseCategory`] enum. The
/// wrapper exists so that the [`ClientError::Parse`] variant payload is
/// insulated from a future JSON-parser swap (bd:JMAP-6r7c.26).
///
/// Construct via [`ClientError::from_parse`] (the common path) or
/// [`ParseError::from_serde_json`] (the low-level path that returns a
/// wrapper without classifying it into a [`ClientError`] variant).
#[non_exhaustive]
pub struct ParseError(serde_json::Error);

impl ParseError {
    /// Wrap a [`serde_json::Error`] into a [`ParseError`].
    ///
    /// Most callers want [`ClientError::from_parse`] which wraps and
    /// classifies in one step; this lower-level constructor is for
    /// callers that need to hold a [`ParseError`] before deciding
    /// whether to surface it as [`ClientError::Parse`] or in some
    /// other variant.
    pub fn from_serde_json(e: serde_json::Error) -> Self {
        Self(e)
    }

    /// One-based line number where parsing failed, or `0` if the parser
    /// does not report a line number for this error category.
    pub fn line(&self) -> usize {
        self.0.line()
    }

    /// One-based column number where parsing failed, or `0` if the parser
    /// does not report a column number for this error category.
    pub fn column(&self) -> usize {
        self.0.column()
    }

    /// Coarse-grained category of the failure.
    ///
    /// See [`ParseCategory`] for the variant set and what each one means.
    pub fn classify(&self) -> ParseCategory {
        ParseCategory::from(self.0.classify())
    }
}

impl fmt::Display for ParseError {
    fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
        fmt::Display::fmt(&self.0, f)
    }
}

impl fmt::Debug for ParseError {
    fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
        f.debug_tuple("ParseError").field(&self.0).finish()
    }
}

impl StdError for ParseError {
    fn source(&self) -> Option<&(dyn StdError + 'static)> {
        Some(&self.0)
    }
}

/// JSON serialize error reported by the underlying JSON serializer.
///
/// Shape mirrors [`ParseError`]; see that type for the SemVer-isolation
/// rationale. Indicates a caller bug — the data structure passed to a
/// serializer contains non-serializable values (`f64::NAN`, a map keyed
/// by a non-stringifiable type, etc.).
#[non_exhaustive]
pub struct SerializeError(serde_json::Error);

impl SerializeError {
    /// Wrap a [`serde_json::Error`] into a [`SerializeError`].
    ///
    /// Most callers want [`ClientError::from_serialize`] which wraps and
    /// classifies in one step.
    pub fn from_serde_json(e: serde_json::Error) -> Self {
        Self(e)
    }

    /// One-based line number where serialization failed, or `0` if the
    /// serializer does not report a line for this category.
    pub fn line(&self) -> usize {
        self.0.line()
    }

    /// One-based column number where serialization failed, or `0` if the
    /// serializer does not report a column for this category.
    pub fn column(&self) -> usize {
        self.0.column()
    }

    /// Coarse-grained category of the failure.
    pub fn classify(&self) -> ParseCategory {
        ParseCategory::from(self.0.classify())
    }
}

impl fmt::Display for SerializeError {
    fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
        fmt::Display::fmt(&self.0, f)
    }
}

impl fmt::Debug for SerializeError {
    fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
        f.debug_tuple("SerializeError").field(&self.0).finish()
    }
}

impl StdError for SerializeError {
    fn source(&self) -> Option<&(dyn StdError + 'static)> {
        Some(&self.0)
    }
}

/// Classification of a [`ParseError`] / [`SerializeError`] failure.
///
/// Maps onto the four `serde_json::error::Category` variants without
/// re-exporting the third-party enum; the workspace-local enum is what
/// callers pattern-match on, insulating them from a future JSON-parser
/// swap.
#[non_exhaustive]
#[derive(Debug, Clone, PartialEq, Eq, Hash)]
pub enum ParseCategory {
    /// The error was caused by a failure to read or write bytes on an
    /// I/O stream.
    Io,
    /// The error was caused by input that was not syntactically valid
    /// JSON.
    Syntax,
    /// The error was caused by input data that was semantically incorrect
    /// (e.g. a JSON value of the wrong type for the target Rust type).
    Data,
    /// The error was caused by prematurely-terminated input.
    Eof,
}

impl From<serde_json::error::Category> for ParseCategory {
    fn from(cat: serde_json::error::Category) -> Self {
        match cat {
            serde_json::error::Category::Io => Self::Io,
            serde_json::error::Category::Syntax => Self::Syntax,
            serde_json::error::Category::Data => Self::Data,
            serde_json::error::Category::Eof => Self::Eof,
        }
    }
}

// ---------------------------------------------------------------------------
// ClientError
// ---------------------------------------------------------------------------

/// Errors produced by the base JMAP client.
///
/// Variants cover transport failures (`Http`, `WebSocket`), authentication
/// (`AuthFailed`), JMAP protocol errors (`MethodError`, `UnexpectedResponse`),
/// caller bugs (`InvalidArgument`, `InvalidHeaderValue`, `Serialize`), and
/// resource-exhaustion guards (`ResponseTooLarge`, `SseFrameTooLarge`).
///
/// Marked `#[non_exhaustive]` so additional variants may be introduced in
/// minor releases. See per-variant documentation for retriability guidance.
#[non_exhaustive]
#[derive(Debug, thiserror::Error)]
pub enum ClientError {
    /// Network or TLS error from the HTTP layer. May be retriable (transient
    /// network failure) or permanent (TLS configuration error). Indicates a
    /// network or transport problem, not a JMAP protocol error.
    ///
    /// The payload is an opaque [`HttpError`] that does not expose any
    /// third-party error type — this crate's HTTP transport can be swapped
    /// or its major version bumped without affecting downstream callers.
    /// Use [`HttpError::is_timeout`], [`HttpError::status`], etc. to diagnose.
    #[error("HTTP error: {0}")]
    Http(HttpError),

    /// A header value could not be encoded. Indicates a caller bug — the
    /// credential string contains characters that are not valid HTTP header
    /// value characters. Not retriable.
    #[error("invalid header value: {0}")]
    InvalidHeaderValue(InvalidHeaderValueError),

    /// The server returned HTTP 401 (authentication failure) or 403
    /// (authorization failure — credentials present but insufficient). Not
    /// retriable without correcting credentials.
    #[error("authentication or authorization failure: HTTP {0}")]
    AuthFailed(u16),

    /// A server response could not be parsed or did not match the expected
    /// shape. Indicates the server sent a malformed response. Not retriable
    /// without a server fix.
    ///
    /// The payload is an opaque [`ParseError`] that does not expose the
    /// underlying JSON parser's error type — the variant is insulated from
    /// a future parser swap. Construct explicitly:
    /// `.map_err(ClientError::from_parse)` (or
    /// `.map_err(jmap_base_client::ClientError::from_parse)` from outside
    /// the crate). Pattern-match via `ClientError::Parse(e) => e.line()`,
    /// `e.column()`, `e.classify()` — see [`ParseError`].
    #[error("parse error: {0}")]
    Parse(ParseError),

    /// Blob SHA-256 mismatch on upload or download. Indicates in-transit
    /// corruption or a misbehaving server. Not retriable without re-fetching
    /// metadata.
    ///
    /// # Field semantics across both call sites (bd:JMAP-6r7c.10)
    ///
    /// The same variant is emitted from both upload and download paths and
    /// the role of each field is constant across paths:
    ///
    /// - `expected` is the **pre-stated digest** the client was comparing
    ///   against — i.e. the value that should hold if the bytes are intact.
    /// - `actual` is the **freshly-observed digest** the client just
    ///   computed or just learned.
    ///
    /// The *source* of each value depends on which call produced the error:
    ///
    /// | Call site | `expected` | `actual` |
    /// |---|---|---|
    /// | [`JmapClient::upload_blob`](crate::JmapClient::upload_blob) | client's own SHA-256 of the bytes about to be uploaded | server's reported SHA-256 in the upload response |
    /// | [`JmapClient::download_blob`](crate::JmapClient::download_blob) | `DownloadBlobParams::expected_sha256` supplied by the caller (typed [`jmap_cid_types::Sha256`], guaranteed canonical lowercase) | client's SHA-256 of the actually-received bytes |
    /// | [`JmapClient::upload_blob_stream`](crate::JmapClient::upload_blob_stream) | client's SHA-256 of the bytes streamed to the server | server's reported SHA-256 in the upload response |
    /// | [`JmapClient::download_blob_stream`](crate::JmapClient::download_blob_stream) (final stream item) | `DownloadBlobParams::expected_sha256` supplied by the caller | client's SHA-256 of all streamed bytes |
    ///
    /// Both digests are canonical 64-character lowercase hex (per
    /// draft-atwood-jmap-cid-00 §2 ABNF).
    #[error("blob integrity check failed: expected {expected}, got {actual}")]
    BlobIntegrityMismatch {
        /// Pre-stated SHA-256 hex digest the client was comparing against.
        /// On upload, this is the client's own pre-upload computation; on
        /// download, this is the caller-supplied
        /// [`DownloadBlobParams::expected_sha256`](crate::DownloadBlobParams::expected_sha256)
        /// (typed [`jmap_cid_types::Sha256`], guaranteed canonical lowercase).
        expected: String,
        /// Freshly-observed SHA-256 hex digest. On upload, this is the
        /// server-reported digest from the upload response. On download,
        /// this is the client's own digest over the received bytes.
        actual: String,
    },

    /// A caller-supplied argument violates a precondition (e.g. empty token,
    /// colon in BasicAuth username, missing required filter field).
    #[error("invalid argument: {0}")]
    InvalidArgument(String),

    /// The JMAP Session object from the server was missing a required field.
    /// Indicates a server-side bug or incompatible server. Not retriable.
    #[error("invalid session: {0}")]
    InvalidSession(String),

    /// The JMAP API response did not contain the expected method call ID.
    /// Indicates a server-side bug or unexpected response shape.
    #[error("method not found in response: {0}")]
    MethodNotFound(String),

    /// The JMAP server returned a method-level error object (RFC 8620 §3.6.2).
    /// Retriability depends on [`JmapError::error_type`](jmap_types::JmapError::error_type)
    /// (e.g. `serverFail` may be retried; `invalidArguments` is not).
    ///
    /// The payload keeps every property [`jmap_types::JmapError`] models
    /// (`type`, `description`, `limit`), so for example a
    /// `tooManyChanges` error's `limit` reaches the caller.
    /// [`method_error_details`](crate::method_error_details) returns any
    /// other properties. An error object whose `type` is missing, or whose
    /// `type`, `description` or `limit` is not of its RFC 8620
    /// type (for example a string or negative `limit`), is
    /// [`ClientError::Parse`]: RFC 8620 §3.6.2 says it "MUST have a type
    /// property".
    #[error("JMAP method error: {0}")]
    MethodError(jmap_types::JmapError),

    /// A caller-supplied value could not be serialized to JSON. Indicates
    /// a caller bug — the data structure contains values JSON cannot
    /// represent. Not retriable.
    ///
    /// Returned by [`to_args`](crate::to_args) (and so by every extension
    /// client method that serializes a caller-supplied argument) and by
    /// [`WsSession::send_request`](crate::WsSession::send_request). The
    /// HTTP `call()` path delegates request serialization to reqwest,
    /// which surfaces serialization failures as [`ClientError::Http`].
    ///
    /// The payload is an opaque [`SerializeError`] that does not expose the
    /// underlying JSON serializer's error type. Construct explicitly:
    /// `.map_err(ClientError::from_serialize)`. Pattern-match via
    /// `ClientError::Serialize(e) => e.line()`, `e.column()`, `e.classify()`
    /// — see [`SerializeError`].
    #[error("serialization error: {0}")]
    Serialize(SerializeError),

    /// An SSE frame exceeded the configured buffer limit
    /// ([`ClientConfig::max_sse_frame`](crate::ClientConfig::max_sse_frame)). The stream is terminated after this
    /// error. Indicates a misbehaving or hostile server.
    #[error("SSE frame too large (limit: {limit} bytes)")]
    SseFrameTooLarge {
        /// The configured per-frame buffer cap (in bytes) that was exceeded.
        limit: usize,
    },

    /// A server response body exceeded the enforced size limit. Protects
    /// against unbounded memory allocation from malicious or buggy servers.
    /// `actual` is in bytes (from Content-Length or actual read size).
    #[error("response too large: {actual} bytes exceeds limit of {limit} bytes")]
    ResponseTooLarge {
        /// Observed response size in bytes (from `Content-Length` or the
        /// running total of bytes read so far when streaming).
        actual: u64,
        /// Configured maximum response size in bytes.
        limit: u64,
    },

    /// A WebSocket transport error (connection, framing, or TLS). May be
    /// retriable (transient network failure) or permanent (TLS config error).
    ///
    /// The payload is an opaque [`WebSocketError`] that does not expose any
    /// third-party error type — see [`HttpError`] for the same SemVer
    /// rationale. Use [`WebSocketError::is_io`],
    /// [`WebSocketError::is_protocol`], etc. to diagnose.
    #[error("WebSocket error: {0}")]
    WebSocket(WebSocketError),

    /// The server closed the WebSocket with a Close frame whose status code
    /// asks the client to act, rather than ending the stream cleanly.
    ///
    /// Produced by [`WsSession::next_frame`](crate::WsSession::next_frame)
    /// for status code 1008 (Policy Violation, RFC 6455 §7.4.1). A JMAP Chat
    /// server closes with 1008 when the connection's credentials expire
    /// (draft-atwood-jmap-chat-wss-00 §Authentication and Identity), so the
    /// caller should refresh credentials before reconnecting. Any other
    /// Close frame still ends the stream with `None`. The connection is
    /// closed: do not call `next_frame` again.
    #[error("WebSocket closed by server: code {code}: {reason}")]
    WsClosed {
        /// The Close frame's status code (RFC 6455 §7.4), e.g. `1008`.
        code: u16,
        /// The Close frame's reason text; empty when the server sent none.
        reason: String,
    },

    /// The server returned a response that violates the JMAP protocol (outside
    /// the Session fetch path). Examples: wrong `Content-Type` on an SSE
    /// connection, unexpected response shape on a non-session endpoint.
    ///
    /// Distinct from [`ClientError::InvalidSession`], which indicates a
    /// problem with the Session document itself. Not retriable without a
    /// server fix.
    #[error("unexpected server response: {0}")]
    UnexpectedResponse(String),

    /// Server rate-limited the request. `retry_after` indicates when to retry.
    ///
    /// Produced for an HTTP 429 (Too Many Requests) response from
    /// [`JmapClient::fetch_session`](crate::JmapClient::fetch_session),
    /// [`JmapClient::call`](crate::JmapClient::call),
    /// [`JmapClient::upload_blob`](crate::JmapClient::upload_blob) and
    /// [`JmapClient::download_blob`](crate::JmapClient::download_blob)
    /// (and the `_session` wrappers that delegate to them). Extension crates
    /// also produce it, e.g. for a `rateLimit` SetError. A 429 on the
    /// event-source connection still surfaces as [`ClientError::Http`] so
    /// [`JmapClient::subscribe_events_reconnecting`](crate::JmapClient::subscribe_events_reconnecting)
    /// can keep retrying it.
    ///
    /// `retry_after` comes from the `Retry-After` header (RFC 9110 §10.2.3):
    /// a delay-seconds value is added to the time the response was received,
    /// and an HTTP-date in any of the three RFC 9110 §5.6.7 formats is used
    /// as given. When the header is absent or unparseable, `retry_after` is
    /// the time the response was received — the server gave no delay, so the
    /// caller should apply its own backoff. Instants past
    /// `9999-12-31T23:59:59Z` are clamped to it.
    #[error("rate limited; retry after {retry_after}")]
    RateLimited {
        /// Absolute UTC instant the client should wait until before retrying,
        /// parsed from the `Retry-After` HTTP header (RFC 9110 §10.2.3).
        retry_after: jmap_types::UTCDate,
    },
}

impl ClientError {
    /// Convert a [`reqwest::Error`] into a [`ClientError::Http`] variant.
    ///
    /// `pub(crate)` so downstream callers cannot construct transport-error
    /// variants — that responsibility belongs to this crate's transport
    /// layer alone. This is the only conversion path from the third-party
    /// type into `ClientError`, and is the reason this crate's public API
    /// no longer mentions `reqwest::Error`.
    pub(crate) fn from_reqwest(e: reqwest::Error) -> Self {
        Self::Http(HttpError(e))
    }

    /// Convert a [`tokio_tungstenite::tungstenite::Error`] into a
    /// [`ClientError::WebSocket`] variant. See
    /// [`from_reqwest`](Self::from_reqwest) for the SemVer rationale.
    pub(crate) fn from_ws(e: tokio_tungstenite::tungstenite::Error) -> Self {
        Self::WebSocket(WebSocketError(e))
    }

    /// Convert a [`reqwest::header::InvalidHeaderValue`] into a
    /// [`ClientError::InvalidHeaderValue`] variant. The inner third-party
    /// type carries no actionable diagnostic state, so we keep only the
    /// `Display` representation as a `String`.
    pub(crate) fn from_invalid_header(e: reqwest::header::InvalidHeaderValue) -> Self {
        Self::InvalidHeaderValue(InvalidHeaderValueError {
            message: e.to_string(),
        })
    }

    /// Convert a [`serde_json::Error`] from a deserialize / parse step
    /// into a [`ClientError::Parse`] variant carrying an opaque
    /// [`ParseError`] payload (bd:JMAP-6r7c.26).
    ///
    /// Public because extension client crates (`jmap-mail-client`,
    /// `jmap-chat-client`, etc.) need to surface their own JSON parse
    /// failures as [`ClientError::Parse`]. Use in `.map_err`:
    ///
    /// ```rust,ignore
    /// let val: T = serde_json::from_slice(&bytes)
    ///     .map_err(jmap_base_client::ClientError::from_parse)?;
    /// ```
    ///
    /// A future JSON-parser swap would deprecate this constructor in
    /// favor of an analogous one for the new parser; the variant
    /// payload type ([`ParseError`]) stays stable.
    pub fn from_parse(e: serde_json::Error) -> Self {
        Self::Parse(ParseError(e))
    }

    /// Convert a [`serde_json::Error`] from a serialize step into a
    /// [`ClientError::Serialize`] variant carrying an opaque
    /// [`SerializeError`] payload (bd:JMAP-6r7c.26).
    ///
    /// Public for the same reason as [`from_parse`](Self::from_parse).
    pub fn from_serialize(e: serde_json::Error) -> Self {
        Self::Serialize(SerializeError(e))
    }

    /// Build a [`ClientError::RateLimited`] for an HTTP 429 response
    /// received at `now`, from its `Retry-After` value (RFC 9110 §10.2.3).
    /// See the variant docs for the absent / unparseable fallback.
    pub(crate) fn rate_limited(retry_after: Option<&str>, now: SystemTime) -> Self {
        let now_secs = now.duration_since(UNIX_EPOCH).map_or(0, |d| d.as_secs());
        let at = retry_after.map(str::trim).and_then(|v| {
            // delay-seconds = 1*DIGIT; `u64::from_str` alone would also accept "+120".
            if !v.is_empty() && v.bytes().all(|b| b.is_ascii_digit()) {
                // A delay too long for u64 is still "not before year 9999".
                Some(
                    v.parse::<u64>()
                        .map_or(u64::MAX, |d| now_secs.saturating_add(d)),
                )
            } else {
                let t = httpdate::parse_http_date(v).ok()?;
                t.duration_since(UNIX_EPOCH).ok().map(|d| d.as_secs())
            }
        });
        Self::RateLimited {
            retry_after: utcdate_from_epoch(at.unwrap_or(now_secs)),
        }
    }
}

/// Serialize a method argument to a [`serde_json::Value`] for a JMAP
/// method call's `arguments` object.
///
/// Every extension client uses this to put a caller-supplied value
/// (filter, sort, patch map, id list, params struct) into a request, so
/// a value that cannot be represented as JSON is an error, never a
/// panic. Filter and comparator types are often caller-supplied
/// generics whose `Serialize` impl this crate cannot see.
///
/// # Errors
///
/// [`ClientError::Serialize`] when `value`'s `Serialize` impl fails, for
/// example a map whose keys do not serialize as strings (JSON object
/// keys are strings, RFC 8259 §4).
pub fn to_args<T: serde::Serialize + ?Sized>(value: &T) -> Result<serde_json::Value, ClientError> {
    serde_json::to_value(value).map_err(ClientError::from_serialize)
}

/// Format seconds since the Unix epoch as an RFC 8620 §1.4 `UTCDate`,
/// clamped to `9999-12-31T23:59:59Z` (the largest four-digit year).
///
/// Uses Howard Hinnant's `civil_from_days` ("chrono-Compatible Low-Level
/// Date Algorithms"), the inverse of the `days_from_civil` that
/// [`jmap_types::UTCDate::to_epoch_seconds`] uses.
fn utcdate_from_epoch(secs: u64) -> jmap_types::UTCDate {
    let secs = secs.min(253_402_300_799);
    let (days, rem) = (secs / 86_400, secs % 86_400);
    let z = days + 719_468;
    let era = z / 146_097;
    let doe = z - era * 146_097; // [0, 146096]
    let yoe = (doe - doe / 1460 + doe / 36_524 - doe / 146_096) / 365; // [0, 399]
    let doy = doe - (365 * yoe + yoe / 4 - yoe / 100); // [0, 365]
    let mp = (5 * doy + 2) / 153; // [0, 11], March-based month
    let day = doy - (153 * mp + 2) / 5 + 1;
    let month = if mp < 10 { mp + 3 } else { mp - 9 };
    let year = yoe + era * 400 + u64::from(month <= 2);
    format!(
        "{year:04}-{month:02}-{day:02}T{:02}:{:02}:{:02}Z",
        rem / 3600,
        rem / 60 % 60,
        rem % 60
    )
    .into()
}

// ---------------------------------------------------------------------------
// Tests
// ---------------------------------------------------------------------------

#[cfg(test)]
mod tests {
    use super::*;

    /// Verify ClientError variants by exhaustive match. Variant names are
    /// part of the public API; this catches accidental rename / removal.
    #[test]
    fn client_error_exhaustive_match() {
        let e = ClientError::InvalidArgument("test".into());
        match e {
            ClientError::Http(_) => {}
            ClientError::InvalidHeaderValue(_) => {}
            ClientError::AuthFailed(_) => {}
            ClientError::Parse(_) => {}
            ClientError::BlobIntegrityMismatch { .. } => {}
            ClientError::InvalidArgument(_) => {}
            ClientError::InvalidSession(_) => {}
            ClientError::MethodNotFound(_) => {}
            ClientError::MethodError(_) => {}
            ClientError::Serialize(_) => {}
            ClientError::SseFrameTooLarge { .. } => {}
            ClientError::ResponseTooLarge { .. } => {}
            ClientError::WebSocket(_) => {}
            ClientError::WsClosed { .. } => {}
            ClientError::UnexpectedResponse(_) => {}
            ClientError::RateLimited { .. } => {}
        }
    }

    /// InvalidHeaderValueError preserves the underlying message so the
    /// Display output matches the third-party error's Display verbatim —
    /// callers that previously logged the `ClientError::InvalidHeaderValue`
    /// variant see the same diagnostic text after the wrapper rename.
    ///
    /// Independent oracle: reqwest::header::InvalidHeaderValue is produced
    /// by HeaderValue::from_str on bytes that are not valid header values
    /// (e.g. embedded newline). The wrapper's Display is just the inner
    /// type's Display.
    #[test]
    fn invalid_header_value_preserves_message() {
        let inner_err = reqwest::header::HeaderValue::from_str("bad\nvalue")
            .expect_err("newline must be rejected as a header value");
        let inner_display = inner_err.to_string();

        let ce = ClientError::from_invalid_header(inner_err);
        let ClientError::InvalidHeaderValue(ihve) = &ce else {
            panic!("must be InvalidHeaderValue variant, got {ce:?}");
        };
        assert_eq!(
            ihve.message(),
            inner_display,
            "wrapper message must equal inner Display"
        );
        // Outer ClientError Display includes the prefix.
        assert!(
            ce.to_string().starts_with("invalid header value: "),
            "ClientError Display must use the variant's #[error] prefix: {ce}"
        );
    }

    /// An HttpError constructed from a reqwest builder failure exposes the
    /// expected diagnostic accessor values: is_builder=true, status=None,
    /// and a non-empty Display. Independent oracle: reqwest's documented
    /// behaviour for invalid URLs (builder error, no status code).
    #[test]
    fn http_error_from_invalid_url_is_builder_error() {
        // reqwest::Client::new().get("not a url") produces a builder error
        // when the URL fails to parse. Building the request and calling
        // .send() requires async context; .build() is synchronous and
        // suffices to provoke a parse failure.
        let client = reqwest::Client::new();
        let build_err = client
            .request(reqwest::Method::GET, "://not-a-url")
            .build()
            .expect_err("malformed URL must produce a build error");

        let ce = ClientError::from_reqwest(build_err);
        let ClientError::Http(http_err) = &ce else {
            panic!("must be Http variant, got {ce:?}");
        };
        assert!(
            http_err.is_builder(),
            "malformed URL must be classified as a builder error"
        );
        assert!(
            http_err.status().is_none(),
            "builder errors carry no HTTP status"
        );
        assert!(
            !http_err.is_timeout(),
            "builder error must not classify as timeout"
        );
        assert!(
            !http_err.is_connect(),
            "builder error must not classify as connect"
        );
        assert!(
            !http_err.to_string().is_empty(),
            "Display must produce a non-empty diagnostic"
        );
    }

    /// A WebSocketError wrapping ConnectionClosed correctly classifies via
    /// its accessor methods. Independent oracle: tungstenite's documented
    /// Error variants are matched directly via the matches! macro.
    #[test]
    fn websocket_error_classifies_connection_closed() {
        let inner = tokio_tungstenite::tungstenite::Error::ConnectionClosed;
        let ce = ClientError::from_ws(inner);
        let ClientError::WebSocket(ws_err) = &ce else {
            panic!("must be WebSocket variant, got {ce:?}");
        };
        assert!(ws_err.is_connection_closed());
        assert!(!ws_err.is_already_closed());
        assert!(!ws_err.is_io());
        assert!(!ws_err.is_protocol());
        assert!(!ws_err.is_capacity());
    }

    /// A WebSocketError wrapping an Io variant correctly classifies via
    /// is_io. Independent oracle: tungstenite::Error::Io is the documented
    /// wrapper for std::io::Error sources.
    #[test]
    fn websocket_error_classifies_io() {
        let io_err = std::io::Error::new(std::io::ErrorKind::ConnectionReset, "test");
        let inner = tokio_tungstenite::tungstenite::Error::Io(io_err);
        let ce = ClientError::from_ws(inner);
        let ClientError::WebSocket(ws_err) = &ce else {
            panic!("must be WebSocket variant, got {ce:?}");
        };
        assert!(ws_err.is_io());
        assert!(!ws_err.is_connection_closed());
        assert!(!ws_err.is_already_closed());
    }

    /// HttpError, WebSocketError, and InvalidHeaderValueError all implement
    /// std::error::Error. This is a regression guard against any future
    /// refactor that drops one of these impls (which would silently break
    /// downstream code that iterates the source chain via Error::source).
    #[test]
    fn wrapper_types_implement_std_error() {
        fn assert_error<E: StdError>() {}
        assert_error::<HttpError>();
        assert_error::<WebSocketError>();
        assert_error::<InvalidHeaderValueError>();
        assert_error::<ParseError>();
        assert_error::<SerializeError>();
    }

    // bd:JMAP-6r7c.26 — wrapping serde_json::Error behind ParseError and
    // SerializeError. Independent oracles below: hand-crafted JSON inputs
    // whose serde_json::Error categorisation is well-documented.

    /// `ClientError::from_parse` wraps a syntax-error JSON failure into a
    /// `ClientError::Parse` carrying a `ParseError` whose `classify()` reports
    /// `ParseCategory::Syntax`. Oracle: `{` alone is documented as a syntax
    /// failure by serde_json (premature `{` with no member).
    #[test]
    fn parse_error_classifies_syntax_failure() {
        let inner =
            serde_json::from_str::<serde_json::Value>("{").expect_err("must fail to parse '{'");
        let ce = ClientError::from_parse(inner);
        let ClientError::Parse(pe) = &ce else {
            panic!("must be Parse variant, got {ce:?}");
        };
        // Serde-json reports EOF for an unclosed object on a stream that
        // contains nothing after `{` — the input was prematurely
        // terminated. Either Syntax or Eof is acceptable here; both are
        // structural-parse failures. Lock both as valid outcomes so a
        // future serde_json upgrade that flips classification does not
        // wrongly fail this test.
        assert!(
            matches!(pe.classify(), ParseCategory::Syntax | ParseCategory::Eof),
            "expected Syntax or Eof, got {:?}",
            pe.classify()
        );
        // line/column are 1-based and non-zero for any parse failure
        // with a position; the unclosed `{` has a position.
        assert!(pe.line() > 0, "line must be 1-based and non-zero");
    }

    /// `ClientError::from_parse` on a type-mismatch error reports
    /// `ParseCategory::Data`. Oracle: feeding `"not a number"` to
    /// `serde_json::from_str::<u32>` is documented as a Data error
    /// (semantic mismatch, not syntax).
    #[test]
    fn parse_error_classifies_data_failure() {
        let inner = serde_json::from_str::<u32>("\"not a number\"")
            .expect_err("string must fail to deserialise as u32");
        let ce = ClientError::from_parse(inner);
        let ClientError::Parse(pe) = &ce else {
            panic!("must be Parse variant, got {ce:?}");
        };
        assert_eq!(pe.classify(), ParseCategory::Data);
    }

    /// `ClientError::from_serialize` wraps a `serde_json::Error` from a
    /// serialise step into a `ClientError::Serialize` carrying an opaque
    /// `SerializeError`. Oracle: a `BTreeMap` whose keys are a tuple
    /// type cannot serialise as JSON because JSON object keys MUST be
    /// strings — serde_json documents this as `Error::key_must_be_a_string`.
    #[test]
    fn serialize_error_wraps_non_string_map_key() {
        let mut map: std::collections::BTreeMap<(i32, i32), &str> =
            std::collections::BTreeMap::new();
        map.insert((1, 2), "value");
        let inner = serde_json::to_string(&map)
            .expect_err("tuple-keyed map must not serialise as a JSON object");
        let ce = ClientError::from_serialize(inner);
        let ClientError::Serialize(se) = &ce else {
            panic!("must be Serialize variant, got {ce:?}");
        };
        // Display surface is non-empty (the underlying serde_json::Error
        // produces a diagnostic).
        assert!(
            !se.to_string().is_empty(),
            "SerializeError Display must be non-empty"
        );
    }

    /// `ParseError`'s `Debug` output formats as `ParseError(...)` with the
    /// inner serde_json::Error nested, NOT as a bare serde_json::Error.
    /// This locks in the wrapper-rename for any code that pattern-matches
    /// on Debug output (e.g. a snapshot test) without exposing the inner
    /// type as the top-level shape.
    #[test]
    fn parse_error_debug_format_uses_wrapper_name() {
        let inner =
            serde_json::from_str::<serde_json::Value>("{").expect_err("must fail to parse '{'");
        let ce = ClientError::from_parse(inner);
        let ClientError::Parse(pe) = &ce else {
            panic!("must be Parse variant");
        };
        let debug = format!("{pe:?}");
        assert!(
            debug.starts_with("ParseError("),
            "Debug must use the wrapper tuple-struct name: {debug}"
        );
    }

    /// `to_args` maps a serialize failure to `ClientError::Serialize`.
    /// Oracle: JSON object keys MUST be strings (RFC 8259 §4), so a
    /// tuple-keyed map has no JSON form; serde_json documents this as
    /// `Error::key_must_be_a_string`.
    #[test]
    fn to_args_maps_failure_to_serialize_variant() {
        let mut map: std::collections::BTreeMap<(i32, i32), &str> =
            std::collections::BTreeMap::new();
        map.insert((1, 2), "value");
        let err = to_args(&map).expect_err("tuple-keyed map has no JSON form");
        assert!(
            matches!(err, ClientError::Serialize(_)),
            "must be Serialize variant, got {err:?}"
        );
    }

    /// `to_args` returns the JSON form of a serializable value. Oracle:
    /// the hand-written JSON a JMAP `ids` argument carries.
    #[test]
    fn to_args_returns_json_value() {
        let v = to_args(&["a1", "b2"][..]).expect("string slice serializes");
        assert_eq!(v, serde_json::json!(["a1", "b2"]));
    }

    /// `SerializeError` Debug format mirror.
    #[test]
    fn serialize_error_debug_format_uses_wrapper_name() {
        let mut map: std::collections::BTreeMap<(i32, i32), &str> =
            std::collections::BTreeMap::new();
        map.insert((1, 2), "value");
        let inner = serde_json::to_string(&map)
            .expect_err("tuple-keyed map must not serialise as a JSON object");
        let ce = ClientError::from_serialize(inner);
        let ClientError::Serialize(se) = &ce else {
            panic!("must be Serialize variant");
        };
        let debug = format!("{se:?}");
        assert!(
            debug.starts_with("SerializeError("),
            "Debug must use the wrapper tuple-struct name: {debug}"
        );
    }

    /// bd:JMAP-6r7c.34 — verify every HttpErrorKind variant by exhaustive
    /// match. A future variant addition (forgetting to update this match)
    /// fails the test, forcing a deliberate choice rather than silent
    /// API drift.
    #[test]
    fn http_error_kind_exhaustive_match() {
        let k = HttpErrorKind::Other;
        match k {
            HttpErrorKind::Timeout => {}
            HttpErrorKind::Connect => {}
            HttpErrorKind::Redirect => {}
            HttpErrorKind::Status(_) => {}
            HttpErrorKind::RequestBody => {}
            HttpErrorKind::ResponseBody => {}
            HttpErrorKind::Decode => {}
            HttpErrorKind::Builder => {}
            HttpErrorKind::Other => {}
        }
    }

    /// bd:JMAP-6r7c.34 — exhaustive match over WebSocketErrorKind. Same
    /// regression-tripwire role as http_error_kind_exhaustive_match.
    #[test]
    fn ws_error_kind_exhaustive_match() {
        let k = WebSocketErrorKind::Other;
        match k {
            WebSocketErrorKind::ConnectionClosed => {}
            WebSocketErrorKind::AlreadyClosed => {}
            WebSocketErrorKind::Url => {}
            WebSocketErrorKind::Protocol => {}
            WebSocketErrorKind::Capacity => {}
            WebSocketErrorKind::Io => {}
            WebSocketErrorKind::Other => {}
        }
    }

    /// bd:JMAP-6r7c.34 — independent oracle for the ConnectionClosed
    /// classification. tungstenite::Error::ConnectionClosed is a unit
    /// variant constructible directly; the test wraps it through
    /// WebSocketError::from and asserts kind() == ConnectionClosed.
    #[test]
    fn ws_error_kind_classifies_connection_closed() {
        let inner = tokio_tungstenite::tungstenite::Error::ConnectionClosed;
        let ws = WebSocketError(inner);
        assert_eq!(ws.kind(), WebSocketErrorKind::ConnectionClosed);
    }

    /// bd:JMAP-6r7c.34 — independent oracle for the Io classification.
    /// std::io::Error is constructible directly and tungstenite::Error
    /// has a `From<std::io::Error>` impl that produces the Io variant.
    #[test]
    fn ws_error_kind_classifies_io() {
        let io_err = std::io::Error::new(std::io::ErrorKind::BrokenPipe, "test");
        let inner = tokio_tungstenite::tungstenite::Error::Io(io_err);
        let ws = WebSocketError(inner);
        assert_eq!(ws.kind(), WebSocketErrorKind::Io);
    }

    /// bd:JMAP-6r7c.34 — independent oracle for the Builder classification.
    /// reqwest::Client::get on a malformed URL produces a builder-time
    /// error; the test sends through HttpError::from(reqwest::Error) and
    /// asserts kind() == Builder. The test does NOT use HttpError's own
    /// is_builder() as the oracle — it uses reqwest's invariant that
    /// "an unparseable URL produces a builder error" as the independent
    /// claim, and asserts the wrapper preserves the classification.
    #[test]
    fn http_error_kind_classifies_builder_error() {
        // reqwest::ClientBuilder::new().build() then .get on a malformed
        // URL is the canonical "builder error" production path. The
        // empty string is rejected as not-a-URL.
        let client = reqwest::ClientBuilder::new().build().expect("build");
        let req_err = client
            .request(reqwest::Method::GET, "not a url")
            .build()
            .expect_err("malformed URL must produce a request builder error");
        // Independent oracle: reqwest documents that URL parse failures
        // during build come back as is_builder() == true.
        assert!(
            req_err.is_builder(),
            "reqwest invariant: malformed-URL build is a builder error"
        );

        let http = HttpError(req_err);
        assert_eq!(
            http.kind(),
            HttpErrorKind::Builder,
            "HttpError::kind must classify a builder-side error as Builder"
        );
    }

    /// `now` for the Retry-After tests: 2014-10-30T06:12:00Z, the RFC 8620
    /// §1.4 example instant (epoch value from `date -u -d @1414649520`).
    fn rfc8620_now() -> SystemTime {
        UNIX_EPOCH + std::time::Duration::from_secs(1_414_649_520)
    }

    fn retry_after_of(e: ClientError) -> String {
        match e {
            ClientError::RateLimited { retry_after } => retry_after.into_inner(),
            other => panic!("expected RateLimited, got {other:?}"),
        }
    }

    /// RFC 9110 §5.6.7: "A recipient that parses a timestamp value in an
    /// HTTP field MUST accept all three HTTP-date formats." The section's
    /// examples are "Sun, 06 Nov 1994 08:49:37 GMT" (IMF-fixdate),
    /// "Sunday, 06-Nov-94 08:49:37 GMT" (RFC 850) and
    /// "Sun Nov  6 08:49:37 1994" (asctime), all the same instant.
    #[test]
    fn rate_limited_accepts_all_three_http_date_formats() {
        for v in [
            "Sun, 06 Nov 1994 08:49:37 GMT",
            "Sunday, 06-Nov-94 08:49:37 GMT",
            "Sun Nov  6 08:49:37 1994",
        ] {
            assert_eq!(
                retry_after_of(ClientError::rate_limited(Some(v), rfc8620_now())),
                "1994-11-06T08:49:37Z",
                "Retry-After: {v}"
            );
        }
    }

    /// RFC 9110 §10.2.3 examples: "Retry-After: Fri, 31 Dec 1999 23:59:59
    /// GMT" and "Retry-After: 120 ... In the latter example, the delay is
    /// 2 minutes."
    #[test]
    fn rate_limited_parses_rfc9110_retry_after_examples() {
        assert_eq!(
            retry_after_of(ClientError::rate_limited(
                Some("Fri, 31 Dec 1999 23:59:59 GMT"),
                rfc8620_now()
            )),
            "1999-12-31T23:59:59Z"
        );
        assert_eq!(
            retry_after_of(ClientError::rate_limited(Some("120"), rfc8620_now())),
            "2014-10-30T06:14:00Z"
        );
    }

    /// RFC 9110 §10.2.3: `delay-seconds = 1*DIGIT`, so "+120" and "" are
    /// neither delay-seconds nor HTTP-date; with no usable value the
    /// documented fallback is the receive time.
    #[test]
    fn rate_limited_falls_back_to_now_without_usable_value() {
        for v in [None, Some(""), Some("+120"), Some("soon")] {
            assert_eq!(
                retry_after_of(ClientError::rate_limited(v, rfc8620_now())),
                "2014-10-30T06:12:00Z",
                "Retry-After: {v:?}"
            );
        }
    }

    /// RFC 8620 §1.4 UTCDate has a four-digit year; a delay-seconds value
    /// overflowing u64 clamps to 9999-12-31T23:59:59Z
    /// (`date -u -d @253402300799`).
    #[test]
    fn rate_limited_clamps_huge_delay() {
        assert_eq!(
            retry_after_of(ClientError::rate_limited(
                Some("99999999999999999999999"),
                rfc8620_now()
            )),
            "9999-12-31T23:59:59Z"
        );
    }

    /// Cross-validation against the independent `days_from_civil`
    /// implementation in `jmap_types::UTCDate::to_epoch_seconds`, plus
    /// fixed vectors from GNU `date -u -d @N`: 951825600 is
    /// 2000-02-29T12:00:00Z (a 400-year leap day) and 784111777 is
    /// 1994-11-06T08:49:37Z.
    #[test]
    fn utcdate_from_epoch_matches_independent_inverse() {
        assert_eq!(utcdate_from_epoch(951_825_600), "2000-02-29T12:00:00Z");
        assert_eq!(utcdate_from_epoch(784_111_777), "1994-11-06T08:49:37Z");
        // Step by a prime so every time-of-day and calendar position is hit.
        let mut s = 0u64;
        while s <= 253_402_300_799 {
            let d = utcdate_from_epoch(s);
            let parsed = jmap_types::UTCDate::new_validated(d.as_ref())
                .unwrap_or_else(|e| panic!("{d} invalid: {e}"));
            assert_eq!(parsed.to_epoch_seconds().unwrap(), s as i64, "{d}");
            s += 9_999_991;
        }
    }
}