jjpr

Multi-forge stacked pull requests for Jujutsu. Push, create, merge, and sync stacked PRs/MRs on GitHub, GitLab, and Forgejo from one tool.

Why jjpr?

Multi-forge — GitHub, GitLab, and Forgejo/Codeberg in one binary, auto-detected from your remote URL
Stack merging — jjpr merge merges from the bottom up with live re-evaluation: merge a PR, rebase the rest, retarget bases, check the next one, repeat
Merge commits — jj new A B handled naturally; jjpr follows the first parent and lets other parents form independent stacks
Pure HTTP — talks directly to forge APIs via ureq; no gh or glab CLI required (though existing credentials are picked up automatically)
Idempotent — run jjpr submit repeatedly as you work; it converges to the correct state, pushing only what changed
Stack-awareness comments — every PR gets a navigation comment showing its position in the stack
Foreign base detection — automatically targets PRs at a coworker's branch when your stack builds on one

Install

Homebrew

brew tap michaeldhopkins/tap
brew install jjpr

From source

git clone https://github.com/michaeldhopkins/jjpr
cargo install --path jjpr

Requires Rust 1.88+.

Usage

jjpr                              # Show stacks with CI/review/mergeability status
jjpr status                       # Same as above (alias for discoverability)
jjpr submit                       # Submit stack (inferred from working copy)
jjpr submit <bookmark>            # Submit stack up to bookmark
jjpr submit --dry-run             # Preview without executing
jjpr submit --reviewer alice,bob  # Request reviewers on all PRs
jjpr submit --remote upstream     # Use a specific git remote
jjpr submit --draft               # Create new PRs as drafts
jjpr submit --ready               # Mark existing draft PRs as ready
jjpr merge                        # Merge stack from the bottom up
jjpr merge <bookmark>             # Merge stack up to bookmark
jjpr merge --watch                # Wait for pending CI and auto-continue
jjpr merge --merge-method rebase  # Use rebase merge method
jjpr merge --no-ci-check          # Merge even if CI hasn't passed
jjpr merge --dry-run              # Preview without executing
jjpr submit --base coworker-feat  # Override auto-detected base branch
jjpr merge --base coworker-feat   # Override auto-detected base branch
jjpr config init                  # Create default config file
jjpr config init --repo           # Create repo-local config at .jj/jjpr.toml
jjpr --no-fetch                   # Show stacks without fetching
jjpr submit --no-fetch            # Submit without fetching first
jjpr auth test                    # Test forge authentication
jjpr auth setup                   # Show auth setup instructions

Stack overview

Run jjpr (or jjpr status) with no arguments to see your current stacks and their PR/MR status. This is read-only — it fetches the latest state but doesn't push or modify anything.

Each PR shows its mergeability, CI status, and review state:

  auth (1 change, #42 open, synced)
    ✓ mergeable  ✓ CI passing  ✓ 1 approval
  profile (2 changes, #43 open, needs push)
    ✗ CI failing  ✗ 0/1 approvals  ⚠ changes requested

Draft PRs show a simplified status:

  payments (1 change, #44 draft, synced)
    — draft

When you have multiple independent stacks, they're labeled:

Stack 1:
  auth (1 change, #42 open, synced)
    ✓ mergeable  ✓ CI passing  ✓ 1 approval
  profile (2 changes, #43 open, synced)
    ✓ mergeable  ✓ CI passing  ✓ 1 approval

Stack 2:
  payments (1 change, #44 draft, needs push)
    — draft
  checkout (3 changes, #45 open, synced)
    ✗ CI pending  ✗ 0/1 approvals

Submitting a stack

jjpr submit (or jjpr submit profile) will:

Push all bookmarks in the stack to the remote
Create PRs for bookmarks that don't have one yet
Update PR base branches to maintain the stack structure
Update PR bodies when commit descriptions have changed
Add/update a stack-awareness comment on each PR

Submit is idempotent — run it repeatedly as you work. After rebasing, editing commit messages, or restacking with jj rebase, just run jjpr submit again and it will push the updated commits, fix PR base branches, and sync descriptions. If everything is already up to date, it reports "Stack is up to date."

PRs are created with the commit description as the title and body.

When no bookmark is specified, jjpr infers the target from your working copy's position — it finds which stack overlaps with trunk()..@ and submits up to the topmost bookmark.

Stacking on other branches

jjpr auto-detects when your stack is based on someone else's branch. If a commit in your stack's ancestry has a remote bookmark that isn't one of your own, jjpr treats it as a foreign base and targets your first PR at that branch instead of the default branch (e.g., main).

  auth (1 change, #42 open, synced)
  profile (1 change, needs push)
  (based on coworker-feat)

Use --base <branch> on submit or merge to override auto-detection — for example, when the coworker hasn't pushed yet, or when you want to target a specific branch.

Draft PRs

Use --draft to create new PRs as drafts. Existing PRs are not affected.

Use --ready to convert all draft PRs in the stack to ready-for-review. These flags are mutually exclusive.

PR descriptions

PR title and body are derived from the first commit's description in each bookmark's segment.

The PR body is wrapped in HTML comment markers. When you re-submit after changing a commit message, only the managed section is updated — any text you add above or below (screenshots, notes, test plans) is preserved.

If you manually remove the markers from the PR body, jjpr will stop updating the description for that PR.

The PR title is not automatically updated after creation. If you change your commit's first line, jjpr will warn you about the drift.

Merging a stack

jjpr merge merges your stack from the bottom up. For each PR, it checks:

PR is not a draft
CI checks pass (configurable)
Required number of approvals (configurable)
No changes requested
No merge conflicts

If the bottommost PR is mergeable, jjpr merges it, fetches the updated default branch, rebases the remaining stack onto it with jj rebase, pushes all remaining bookmarks, and retargets the next PR's base if needed. Then it checks the next PR and continues until blocked or done.

If a PR is blocked (e.g., CI pending), jjpr reports why and stops:

  Skipping 'auth' — PR #42 already merged
  Merging 'profile' (PR #43, squash)...
    https://github.com/o/r/pull/43
  Fetching remotes...
  Rebasing remaining stack onto main...
  Pushing 'settings'...
  Updating PR #44 base to 'main'...
  Blocked at 'settings' (PR #44):
    - CI checks are pending

Run `jjpr merge --watch` to wait for CI and auto-continue.

Watching for CI

Use --watch to wait for transient blockers (pending CI, unknown mergeability) instead of stopping. jjpr polls every 30 seconds for up to 30 minutes. When the blocker clears, it continues merging automatically:

  Blocked at 'settings' (PR #44):
    - CI checks are pending

  Watching... (polling every 30s, timeout 30m)
  ....  Ready — continuing merge.

  Merging 'settings' (PR #44, squash)...

If a permanent blocker appears during watching (e.g., CI fails, changes requested), jjpr stops immediately.

Retry on transient errors

Merge API calls are retried automatically on transient HTTP errors (502, 503). If GitHub returns a 405 "merge already in progress", jjpr polls the PR state for up to 30 seconds to confirm the merge completed. No action needed — this is transparent.

Local divergence

If your local commits have diverged from the remote (e.g., after a local jj rebase), jjpr continues merging PRs on the forge and reports local issues at the end:

  Merging 'auth' (#42, squash)...
  Fetching remotes...
  Rebasing remaining stack onto main...
  Pushing 'profile'...
  Warning: failed to push 'profile': conflicted commits
  Skipping local sync (local state already diverged)
  Merging 'profile' (#43, squash)...

Done — 2 PRs merged.

Note: local state is out of sync with the forge:
  Failed to push 'profile': conflicted commits

To accept the forge state (discard local divergence):
  jj git fetch
  jj bookmark set profile -r profile@origin

Or to fix local state and push it to the forge:
  jj git fetch && jj rebase -s kpqxywzy -d main
  # resolve any conflicts, then:
  jjpr submit

Divergent change IDs (multiple commits sharing the same ID, typically from editing sessions) are also handled as local warnings rather than fatal errors. jjpr merges on the forge and reports the divergence for you to resolve locally.

CLI flags override the config file: --merge-method, --required-approvals, --no-ci-check.

Configuration

jjpr uses an optional global config at ~/.config/jjpr/config.toml (or $XDG_CONFIG_HOME/jjpr/config.toml). Run jjpr config init to create one with defaults:

# Merge method: "squash", "merge", or "rebase"
merge_method = "squash"

# Number of approving reviews required before merging
required_approvals = 1

# Whether CI checks must pass before merging
require_ci_pass = true

Repo-local config

You can also create a repo-local config at .jj/jjpr.toml (inside the .jj/ directory, which is gitignored). Run jjpr config init --repo to create one. Repo-local settings override global settings.

This is useful for setting the forge type and token for self-hosted instances:

# Forge type: "github", "gitlab", or "forgejo"
forge = "forgejo"

# Environment variable name containing the API token
forge_token_env = "FORGEJO_TOKEN"

When forge is set in config, auto-detection is skipped and the configured forge type is used directly. The token is read from the env var named by forge_token_env (or the forge's default: GITHUB_TOKEN, GITLAB_TOKEN, or FORGEJO_TOKEN).

If no config file exists, defaults are used. CLI flags always override the config file.

Fetching

By default, jjpr fetches all remotes before operating to ensure it has the latest state. Use --no-fetch to skip this (useful for offline work or when you've just fetched).

Reviewers

Use --reviewer alice,bob to request reviewers. Reviewers are applied to all PRs in the stack — both newly created and existing ones.

Requirements

Rust 1.88+ (for building from source)
jj 0.36+ (Jujutsu VCS)
A colocated jj/git repository with a supported remote

Authentication is token-based. jjpr talks directly to forge APIs — no CLI tools required.

Forge	Token env var	CLI fallback
GitHub	`GITHUB_TOKEN` or `GH_TOKEN`	`gh auth login` (reads stored credentials)
GitLab	`GITLAB_TOKEN`	`glab auth login` (reads stored credentials)
Forgejo/Codeberg	`FORGEJO_TOKEN`	—

If you already use gh or glab, jjpr picks up your existing credentials automatically — no extra setup needed.

For Forgejo/Codeberg, generate an API token with repo scope from your instance's settings (e.g., https://codeberg.org/user/settings/applications) and export it:

export FORGEJO_TOKEN=your_token_here

For self-hosted Forgejo, also set the forge type in .jj/jjpr.toml:

forge = "forgejo"

How it works

jjpr auto-detects the forge from your remote URL and talks directly to forge APIs via HTTP. It shells out to jj for version control operations, discovers stacks by walking bookmarks toward trunk, builds an adjacency graph, and plans submissions by comparing local state with the forge.

Auto-detection recognizes github.com, gitlab.com, and codeberg.org (plus Enterprise subdomains for GitHub/GitLab). For self-hosted instances, set forge in .jj/jjpr.toml — see Repo-local config.

Merge commits (jj new A B) are supported: jjpr follows the first parent through the merge and lets the other parent(s) form independent stacks. PRs for merge bookmarks include a note explaining which branches were merged and that the diff may include their changes until those PRs land.

Development

cargo test               # Unit tests + jj integration tests
cargo clippy --tests      # Lint everything
JJPR_E2E=1 cargo test  # Include E2E tests (requires gh auth + network)

Test tiers

Unit tests: Fast, no I/O, use stub implementations of Jj and Forge traits
jj integration tests: Real jj binary against temp repos, no network
E2E tests: Real jj + real forge against jjpr-testing-environment, guarded by JJPR_E2E env var

License

MIT or Apache-2.0

jjpr 0.12.2