# Input Devices
Jay configures input devices through the `[[inputs]]` array. Each entry matches
one or more devices and applies settings such as acceleration, tap behavior,
and device-to-output mapping.
> [!NOTE]
> Input configuration defined in `config.toml` is only applied to devices
> connected after the configuration is loaded. To change settings for
> already-connected devices, use `jay input` or the `configure-input` action.
## Matching input devices
Every `[[inputs]]` entry requires a `match` field. When `match` is a
**table**, all specified fields must match (AND logic). When `match` is an
**array**, any entry matching is sufficient (OR logic).
### By device name
```toml
[[inputs]]
match.name = "Logitech G300s Optical Gaming Mouse"
left-handed = true
```
Run `jay input` to see the names of all connected input devices.
### By device type
Match all devices of a given type using boolean flags:
```toml
[[inputs]]
match.is-pointer = true
natural-scrolling = true
```
Available type flags: `is-keyboard`, `is-pointer`, `is-touch`,
`is-tablet-tool`, `is-tablet-pad`, `is-gesture`, `is-switch`.
### By syspath or devnode
The `syspath` is usually stable across reboots and useful when you have
multiple identical devices:
```toml
[[inputs]]
match.syspath = "/sys/devices/pci0000:00/0000:00:08.1/0000:14:00.4/usb5/5-1/5-1.1/5-1.1.2/5-1.1.2:1.0"
left-handed = true
```
The `devnode` (e.g. `/dev/input/event4`) is typically not stable across
reboots.
### Combining criteria
AND -- all fields in a single table must match:
```toml
[[inputs]]
match = { name = "SynPS/2 Synaptics TouchPad", is-pointer = true }
tap-enabled = true
```
OR -- any entry in an array may match:
```toml
[[inputs]]
match = [
{ name = "Logitech G300s Optical Gaming Mouse" },
{ name = "Razer DeathAdder V2" },
]
left-handed = true
```
## Tagging devices
Assign a `tag` to reference a device from shortcuts or actions:
```toml
[[inputs]]
tag = "mouse"
match.is-pointer = true
[shortcuts]
alt-l = {
type = "configure-input",
input = {
match.tag = "mouse",
left-handed = true,
},
}
alt-r = {
type = "configure-input",
input = {
match.tag = "mouse",
left-handed = false,
},
}
```
Tags work similarly to output names -- they let you refer to matched devices
elsewhere in the configuration.
## Libinput settings
These settings map directly to libinput device options. See the
[libinput documentation](https://wayland.freedesktop.org/libinput/doc/latest/)
for detailed explanations of each.
### Acceleration
```toml
[[inputs]]
match.is-pointer = true
accel-profile = "Flat"
accel-speed = 0.0
```
| `accel-profile`| `Flat` or `Adaptive` | Pointer acceleration curve |
| `accel-speed` | `-1.0` to `1.0` | Speed within the selected profile |
### Tap and click
```toml
[[inputs]]
match.is-pointer = true
tap-enabled = true
tap-drag-enabled = true
tap-drag-lock-enabled = false
click-method = "clickfinger"
```
| `tap-enabled` | `true` / `false` | Tap-to-click on touchpads |
| `tap-drag-enabled` | `true` / `false` | Tap-and-drag on touchpads |
| `tap-drag-lock-enabled` | `true` / `false` | Keep drag active after lifting finger |
| `click-method` | `none`, `button-areas`, `clickfinger` | How physical clicks are interpreted |
### Other libinput options
```toml
[[inputs]]
match.is-pointer = true
left-handed = true
natural-scrolling = true
middle-button-emulation = true
```
`left-handed`
: Swap left and right buttons
`natural-scrolling`
: Reverse scroll direction ("macOS-style")
`middle-button-emulation`
: Simultaneous left+right click produces a middle click
## Scroll speed
Control how many pixels each scroll wheel detent produces:
```toml
[[inputs]]
match.is-pointer = true
px-per-wheel-scroll = 30
```
This setting maps to the legacy `wl_pointer.axis` event that is mostly unused
nowadays. It has no effect on applications that don't use this event.
### Pixel scroll multiplier
Apply a multiplier to non-wheel scroll events (e.g. touchpad two-finger
scrolling):
```toml
[[inputs]]
match.is-pointer = true
px-scroll-multiplier = 2.0
```
The default is `1.0`. This has no effect on scroll events created by a scroll
wheel.
## Transform matrix
Apply a 2x2 matrix to relative motion events. This is useful for adjusting
pointer speed independently of libinput acceleration:
```toml
[[inputs]]
match.is-pointer = true
transform-matrix = [[0.35, 0], [0, 0.35]]
```
The example above reduces pointer speed to 35% of normal. The identity matrix
is `[[1, 0], [0, 1]]`.
## Calibration matrix
A 2x3 matrix for absolute input devices (touchscreens). This is passed
directly to libinput:
```toml
[[inputs]]
match.is-touch = true
calibration-matrix = [[0, 1, 0], [-1, 0, 1]]
```
The example above rotates touch input by 90 degrees.
## Per-device keymap
Override the global keymap for a specific keyboard:
```toml
[[inputs]]
match.name = "ZSA Technology Labs Inc ErgoDox EZ"
keymap.rmlvo = {
layout = "us",
options = "compose:ralt",
}
```
Per-device keymaps also support `shortcuts-group`:
```toml
[[inputs]]
match.name = "ZSA Technology Labs Inc ErgoDox EZ"
keymap.rmlvo = {
layout = "us,de",
options = "grp:ctrl_space_toggle",
}
keymap.shortcuts-group = 0
```
The override becomes active when a key is pressed on that device. See the
[Keymaps & Repeat Rate](keymaps.md) chapter for the full range of keymap
options.
## Mapping to outputs
Map tablets and touchscreens to a specific output so that the input area
corresponds to the correct display:
```toml
[[outputs]]
name = "left"
match.serial-number = "33K03894SL0"
[[inputs]]
match.name = "Wacom Bamboo Comic 2FG Pen"
output.name = "left"
```
You can also map by connector:
```toml
[[inputs]]
match.name = "Wacom Bamboo Comic 2FG Pen"
output.connector = "DP-1"
```
To remove a mapping at runtime, use the `remove-mapping` field in a
`configure-input` action:
```toml
[shortcuts]
alt-x = {
type = "configure-input",
input = {
match.tag = "wacom",
remove-mapping = true,
},
}
```
## Lid switch events
Lid switch devices report when a laptop lid is opened or closed. Use the
`on-lid-closed` and `on-lid-opened` fields to trigger actions. These fields
only work in the top-level `[[inputs]]` array:
```toml
[[inputs]]
match.name = "<lid switch name>"
on-lid-closed = {
type = "configure-connector",
connector = {
match.name = "eDP-1",
enabled = false,
},
}
on-lid-opened = {
type = "configure-connector",
connector = {
match.name = "eDP-1",
enabled = true,
},
}
```
Run `jay input` to find the name of your lid switch device.
## Convertible (2-in-1) events
For convertible laptops that switch between laptop and tablet form factors:
```toml
[[inputs]]
match.name = "<switch name>"
on-converted-to-laptop = "$enable-keyboard"
on-converted-to-tablet = "$disable-keyboard"
```
These fields only work in the top-level `[[inputs]]` array.
## Runtime changes
### Listing devices
```shell
~$ jay input
```
This shows all connected input devices with their names, syspaths, devnodes,
type flags, and current settings.
### Changing settings at runtime
```shell
~$ jay input device <id> set-accel-profile flat
~$ jay input device <id> set-accel-speed 0.5
~$ jay input device <id> set-tap-enabled true
~$ jay input device <id> set-left-handed true
~$ jay input device <id> set-natural-scrolling true
~$ jay input device <id> set-transform-matrix 0.35 0 0 0.35
```
### Using shortcuts
The `configure-input` action applies settings from a keybinding:
```toml
[shortcuts]
alt-n = {
type = "configure-input",
input = {
match.tag = "touchpad",
natural-scrolling = true,
},
}
```
## Full reference
For the exhaustive list of all input fields, match criteria, and related types,
see the [auto-generated specification](https://github.com/mahkoh/jay/blob/master/toml-spec/spec/spec.generated.md).