io_uring/

submit.rs

use std::os::unix::io::{AsRawFd, RawFd};
use std::sync::atomic;
use std::{io, mem, ptr};

use crate::register::{execute, Probe};
use crate::sys;
use crate::types::{CancelBuilder, Timespec};
use crate::util::{cast_ptr, OwnedFd};
use crate::Parameters;
use bitflags::bitflags;

use crate::register::Restriction;

use crate::types;

bitflags!(
    /// See man page for complete description:
    /// https://man7.org/linux/man-pages/man2/io_uring_enter.2.html
    #[derive(Debug, Clone, Copy, PartialEq, Eq, PartialOrd, Ord)]
    pub struct EnterFlags: u32 {
        /// Wait for at least `min_complete` events to complete.
        const GETEVENTS = sys::IORING_ENTER_GETEVENTS;

        /// If the kernel thread is sleeping, wake it up.
        const SQ_WAKEUP = sys::IORING_ENTER_SQ_WAKEUP;

        /// Wait for at least one submission queue entry to be available.
        const SQ_WAIT = sys::IORING_ENTER_SQ_WAIT;

        /// Use the extended argument structure.
        const EXT_ARG = sys::IORING_ENTER_EXT_ARG;

        /// Submit using registered submission queue ring.
        const REGISTERED_RING = sys::IORING_ENTER_REGISTERED_RING;

        /// Timeout argument interpreted as absolute time.
        const ABS_TIMER = sys::IORING_ENTER_ABS_TIMER;

        /// Arg is offset into an area of wait regions previously registered.
        const EXT_ARG_REG = sys::IORING_ENTER_EXT_ARG_REG;

        /// Don't mark waiting task as being in iowait in certain cases.
        const NO_IOWAIT = sys::IORING_ENTER_NO_IOWAIT;
    }
);

/// Interface for submitting submission queue events in an io_uring instance to the kernel for
/// executing and registering files or buffers with the instance.
///
/// io_uring supports both directly performing I/O on buffers and file descriptors and registering
/// them beforehand. Registering is slow, but it makes performing the actual I/O much faster.
pub struct Submitter<'a> {
    fd: &'a OwnedFd,
    params: &'a Parameters,

    sq_head: *const atomic::AtomicU32,
    sq_tail: *const atomic::AtomicU32,
    sq_flags: *const atomic::AtomicU32,
}

impl<'a> Submitter<'a> {
    #[inline]
    pub(crate) const fn new(
        fd: &'a OwnedFd,
        params: &'a Parameters,
        sq_head: *const atomic::AtomicU32,
        sq_tail: *const atomic::AtomicU32,
        sq_flags: *const atomic::AtomicU32,
    ) -> Submitter<'a> {
        Submitter {
            fd,
            params,
            sq_head,
            sq_tail,
            sq_flags,
        }
    }

    #[inline]
    fn sq_len(&self) -> usize {
        unsafe {
            let head = (*self.sq_head).load(atomic::Ordering::Acquire);
            let tail = (*self.sq_tail).load(atomic::Ordering::Acquire);

            tail.wrapping_sub(head) as usize
        }
    }

    /// Whether the kernel thread has gone to sleep because it waited for too long without
    /// submission queue entries.
    #[inline]
    fn sq_need_wakeup(&self) -> bool {
        unsafe {
            (*self.sq_flags).load(atomic::Ordering::Relaxed) & sys::IORING_SQ_NEED_WAKEUP != 0
        }
    }

    /// CQ ring is overflown
    fn sq_cq_overflow(&self) -> bool {
        unsafe {
            (*self.sq_flags).load(atomic::Ordering::Relaxed) & sys::IORING_SQ_CQ_OVERFLOW != 0
        }
    }

    /// Initiate and/or complete asynchronous I/O. This is a low-level wrapper around
    /// `io_uring_enter` - see `man io_uring_enter` (or [its online
    /// version](https://manpages.debian.org/unstable/liburing-dev/io_uring_enter.2.en.html) for
    /// more details.
    ///
    /// You will probably want to use a more high-level API such as
    /// [`submit`](Self::submit) or [`submit_and_wait`](Self::submit_and_wait).
    ///
    /// # Safety
    ///
    /// This provides a raw interface so developer must ensure that parameters are correct.
    pub unsafe fn enter<T: Sized>(
        &self,
        to_submit: u32,
        min_complete: u32,
        flag: u32,
        arg: Option<&T>,
    ) -> io::Result<usize> {
        let arg = arg
            .map(|arg| cast_ptr(arg).cast())
            .unwrap_or_else(ptr::null);
        let size = mem::size_of::<T>();
        sys::io_uring_enter(
            self.fd.as_raw_fd(),
            to_submit,
            min_complete,
            flag,
            arg,
            size,
        )
        .map(|res| res as _)
    }

    /// Submit all queued submission queue events to the kernel.
    #[inline]
    pub fn submit(&self) -> io::Result<usize> {
        self.submit_and_wait(0)
    }

    /// Submit all queued submission queue events to the kernel and wait for at least `want`
    /// completion events to complete.
    pub fn submit_and_wait(&self, want: usize) -> io::Result<usize> {
        let len = self.sq_len();
        let mut flags = EnterFlags::empty();

        // This logic suffers from the fact the sq_cq_overflow and sq_need_wakeup
        // each cause an atomic load of the same variable, self.sq_flags.
        // In the hottest paths, when a server is running with sqpoll,
        // this is going to be hit twice, when once would be sufficient.
        // However, consider that the `SeqCst` barrier required for interpreting
        // the IORING_ENTER_SQ_WAKEUP bit is required in all paths where sqpoll
        // is setup when consolidating the reads.

        let sq_cq_overflow = self.sq_cq_overflow();

        // When IORING_FEAT_NODROP is enabled and CQ overflows, the kernel buffers
        // completion events internally but doesn't automatically flush them when
        // CQ space becomes available. We must explicitly call io_uring_enter()
        // to flush these buffered events, even with SQPOLL enabled.
        //
        // Without this, completions remain stuck in kernel's internal buffer
        // after draining CQ, causing missing completion notifications.
        let need_syscall_for_overflow = sq_cq_overflow && self.params.is_feature_nodrop();

        if want > 0 || self.params.is_setup_iopoll() || sq_cq_overflow {
            flags.insert(EnterFlags::GETEVENTS);
        }

        if self.params.is_setup_sqpoll() {
            // See discussion in [`SubmissionQueue::need_wakeup`].
            atomic::fence(atomic::Ordering::SeqCst);
            if self.sq_need_wakeup() {
                flags.insert(EnterFlags::SQ_WAKEUP);
            } else if want == 0 && !need_syscall_for_overflow {
                // The kernel thread is polling and hasn't fallen asleep, so we don't need to tell
                // it to process events or wake it up

                // However, if the CQ ring is overflown, we need to tell the kernel to process events
                // by calling io_uring_enter with the IORING_ENTER_GETEVENTS flag.
                return Ok(len);
            }
        }

        unsafe { self.enter::<libc::sigset_t>(len as _, want as _, flags.bits(), None) }
    }

    /// Submit all queued submission queue events to the kernel and wait for at least `want`
    /// completion events to complete with additional options
    ///
    /// You can specify a set of signals to mask and a timeout for operation, see
    /// [`SubmitArgs`](types::SubmitArgs) for more details
    pub fn submit_with_args(
        &self,
        want: usize,
        args: &types::SubmitArgs<'_, '_>,
    ) -> io::Result<usize> {
        let len = self.sq_len();
        let mut flags = EnterFlags::EXT_ARG;

        let sq_cq_overflow = self.sq_cq_overflow();
        let need_syscall = sq_cq_overflow & self.params.is_feature_nodrop();

        if want > 0 || self.params.is_setup_iopoll() || sq_cq_overflow {
            flags.insert(EnterFlags::GETEVENTS);
        }

        if self.params.is_setup_sqpoll() {
            // See discussion in [`SubmissionQueue::need_wakeup`].
            atomic::fence(atomic::Ordering::SeqCst);
            if self.sq_need_wakeup() {
                flags.insert(EnterFlags::SQ_WAKEUP);
            } else if want == 0 && !need_syscall {
                // The kernel thread is polling and hasn't fallen asleep, so we don't need to tell
                // it to process events or wake it up
                return Ok(len);
            }
        }

        unsafe { self.enter(len as _, want as _, flags.bits(), Some(args)) }
    }

    /// Wait for the submission queue to have free entries.
    pub fn squeue_wait(&self) -> io::Result<usize> {
        unsafe { self.enter::<libc::sigset_t>(0, 0, EnterFlags::SQ_WAIT.bits(), None) }
    }

    /// Register in-memory fixed buffers for I/O with the kernel. You can use these buffers with the
    /// [`ReadFixed`](crate::opcode::ReadFixed) and [`WriteFixed`](crate::opcode::WriteFixed)
    /// operations.
    ///
    /// # Safety
    ///
    /// Developers must ensure that the `iov_base` and `iov_len` values are valid and will
    /// be valid until buffers are unregistered or the ring destroyed, otherwise undefined
    /// behaviour may occur.
    pub unsafe fn register_buffers(&self, bufs: &[libc::iovec]) -> io::Result<()> {
        execute(
            self.fd.as_raw_fd(),
            sys::IORING_REGISTER_BUFFERS,
            bufs.as_ptr().cast(),
            bufs.len() as _,
        )
        .map(drop)
    }

    /// Update a range of fixed buffers starting at `offset`.
    ///
    /// This is required to use buffers registered using
    /// [`register_buffers_sparse`](Self::register_buffers_sparse),
    /// although it can be also be used with [`register_buffers`](Self::register_buffers).
    ///
    /// See [`register_buffers2`](Self::register_buffers2)
    /// for more information about resource tagging.
    ///
    /// Available since Linux 5.13.
    ///
    /// # Safety
    ///
    /// Developers must ensure that the `iov_base` and `iov_len` values are valid and will
    /// be valid until buffers are unregistered or the ring destroyed, otherwise undefined
    /// behaviour may occur.
    pub unsafe fn register_buffers_update(
        &self,
        offset: u32,
        bufs: &[libc::iovec],
        tags: Option<&[u64]>,
    ) -> io::Result<()> {
        let nr = tags
            .as_ref()
            .map_or(bufs.len(), |tags| bufs.len().min(tags.len()));

        let rr = sys::io_uring_rsrc_update2 {
            nr: nr as _,
            data: bufs.as_ptr() as _,
            tags: tags.map(|tags| tags.as_ptr() as _).unwrap_or(0),
            offset,
            ..Default::default()
        };

        execute(
            self.fd.as_raw_fd(),
            sys::IORING_REGISTER_BUFFERS_UPDATE,
            cast_ptr::<sys::io_uring_rsrc_update2>(&rr).cast(),
            std::mem::size_of::<sys::io_uring_rsrc_update2>() as _,
        )
        .map(drop)
    }

    /// Variant of [`register_buffers`](Self::register_buffers)
    /// with resource tagging.
    ///
    /// `tags` should be the same length as `bufs` and contain the
    /// tag value corresponding to the buffer at the same index.
    ///
    /// If a tag is zero, then tagging for this particular resource
    /// (a buffer in this case) is disabled. Otherwise, after the
    /// resource had been unregistered and it's not used anymore,
    /// a CQE will be posted with `user_data` set to the specified
    /// tag and all other fields zeroed.
    ///
    /// Available since Linux 5.13.
    ///
    /// # Safety
    ///
    /// Developers must ensure that the `iov_base` and `iov_len` values are valid and will
    /// be valid until buffers are unregistered or the ring destroyed, otherwise undefined
    /// behaviour may occur.
    pub unsafe fn register_buffers2(&self, bufs: &[libc::iovec], tags: &[u64]) -> io::Result<()> {
        let rr = sys::io_uring_rsrc_register {
            nr: bufs.len().min(tags.len()) as _,
            data: bufs.as_ptr() as _,
            tags: tags.as_ptr() as _,
            ..Default::default()
        };
        execute(
            self.fd.as_raw_fd(),
            sys::IORING_REGISTER_BUFFERS2,
            cast_ptr::<sys::io_uring_rsrc_register>(&rr).cast(),
            std::mem::size_of::<sys::io_uring_rsrc_register>() as _,
        )
        .map(drop)
    }

    /// Registers an empty table of nr fixed buffers buffers.
    ///
    /// These must be updated before use, using eg.
    /// [`register_buffers_update`](Self::register_buffers_update).
    ///
    /// See [`register_buffers`](Self::register_buffers)
    /// for more information about fixed buffers.
    ///
    /// Available since Linux 5.13.
    pub fn register_buffers_sparse(&self, nr: u32) -> io::Result<()> {
        let rr = sys::io_uring_rsrc_register {
            nr,
            flags: sys::IORING_RSRC_REGISTER_SPARSE,
            ..Default::default()
        };
        execute(
            self.fd.as_raw_fd(),
            sys::IORING_REGISTER_BUFFERS2,
            cast_ptr::<sys::io_uring_rsrc_register>(&rr).cast(),
            std::mem::size_of::<sys::io_uring_rsrc_register>() as _,
        )
        .map(drop)
    }

    /// Registers an empty file table of nr_files number of file descriptors. The sparse variant is
    /// available in kernels 5.19 and later.
    ///
    /// Registering a file table is a prerequisite for using any request that
    /// uses direct descriptors.
    pub fn register_files_sparse(&self, nr: u32) -> io::Result<()> {
        let rr = sys::io_uring_rsrc_register {
            nr,
            flags: sys::IORING_RSRC_REGISTER_SPARSE,
            resv2: 0,
            data: 0,
            tags: 0,
        };
        execute(
            self.fd.as_raw_fd(),
            sys::IORING_REGISTER_FILES2,
            cast_ptr::<sys::io_uring_rsrc_register>(&rr).cast(),
            mem::size_of::<sys::io_uring_rsrc_register>() as _,
        )
        .map(drop)
    }

    /// Register files for I/O. You can use the registered files with
    /// [`Fixed`](crate::types::Fixed).
    ///
    /// Each fd may be -1, in which case it is considered "sparse", and can be filled in later with
    /// [`register_files_update`](Self::register_files_update).
    ///
    /// Note that this will wait for the ring to idle; it will only return once all active requests
    /// are complete. Use [`register_files_update`](Self::register_files_update) to avoid this.
    pub fn register_files(&self, fds: &[RawFd]) -> io::Result<()> {
        execute(
            self.fd.as_raw_fd(),
            sys::IORING_REGISTER_FILES,
            fds.as_ptr().cast(),
            fds.len() as _,
        )
        .map(drop)
    }

    /// This operation replaces existing files in the registered file set with new ones,
    /// either turning a sparse entry (one where fd is equal to -1) into a real one, removing an existing entry (new one is set to -1),
    /// or replacing an existing entry with a new existing entry. The `offset` parameter specifies
    /// the offset into the list of registered files at which to start updating files.
    ///
    /// You can also perform this asynchronously with the
    /// [`FilesUpdate`](crate::opcode::FilesUpdate) opcode.
    pub fn register_files_update(&self, offset: u32, fds: &[RawFd]) -> io::Result<usize> {
        let fu = sys::io_uring_files_update {
            offset,
            resv: 0,
            fds: fds.as_ptr() as _,
        };
        let ret = execute(
            self.fd.as_raw_fd(),
            sys::IORING_REGISTER_FILES_UPDATE,
            cast_ptr::<sys::io_uring_files_update>(&fu).cast(),
            fds.len() as _,
        )?;
        Ok(ret as _)
    }

    /// Register an eventfd created by [`eventfd`](libc::eventfd) with the io_uring instance.
    pub fn register_eventfd(&self, eventfd: RawFd) -> io::Result<()> {
        execute(
            self.fd.as_raw_fd(),
            sys::IORING_REGISTER_EVENTFD,
            cast_ptr::<RawFd>(&eventfd).cast(),
            1,
        )
        .map(drop)
    }

    /// This works just like [`register_eventfd`](Self::register_eventfd), except notifications are
    /// only posted for events that complete in an async manner, so requests that complete
    /// immediately will not cause a notification.
    pub fn register_eventfd_async(&self, eventfd: RawFd) -> io::Result<()> {
        execute(
            self.fd.as_raw_fd(),
            sys::IORING_REGISTER_EVENTFD_ASYNC,
            cast_ptr::<RawFd>(&eventfd).cast(),
            1,
        )
        .map(drop)
    }

    /// Fill in the given [`Probe`] with information about the opcodes supported by io_uring on the
    /// running kernel.
    ///
    /// # Examples
    ///
    // This is marked no_run as it is only available from Linux 5.6+, however the latest Ubuntu (on
    // which CI runs) only has Linux 5.4.
    /// ```no_run
    /// # fn main() -> Result<(), Box<dyn std::error::Error>> {
    /// let io_uring = io_uring::IoUring::new(1)?;
    /// let mut probe = io_uring::Probe::new();
    /// io_uring.submitter().register_probe(&mut probe)?;
    ///
    /// if probe.is_supported(io_uring::opcode::Read::CODE) {
    ///     println!("Reading is supported!");
    /// }
    /// # Ok(())
    /// # }
    /// ```
    pub fn register_probe(&self, probe: &mut Probe) -> io::Result<()> {
        execute(
            self.fd.as_raw_fd(),
            sys::IORING_REGISTER_PROBE,
            probe.as_mut_ptr() as *const _,
            Probe::COUNT as _,
        )
        .map(drop)
    }

    /// Register credentials of the running application with io_uring, and get an id associated with
    /// these credentials. This ID can then be [passed](crate::squeue::Entry::personality) into
    /// submission queue entries to issue the request with this process' credentials.
    ///
    /// By default, if [`Parameters::is_feature_cur_personality`] is set then requests will use the
    /// credentials of the task that called [`Submitter::enter`], otherwise they will use the
    /// credentials of the task that originally registered the io_uring.
    ///
    /// [`Parameters::is_feature_cur_personality`]: crate::Parameters::is_feature_cur_personality
    pub fn register_personality(&self) -> io::Result<u16> {
        let id = execute(
            self.fd.as_raw_fd(),
            sys::IORING_REGISTER_PERSONALITY,
            ptr::null(),
            0,
        )?;
        Ok(id as u16)
    }

    /// Unregister all previously registered buffers.
    ///
    /// You do not need to explicitly call this before dropping the [`IoUring`](crate::IoUring), as
    /// it will be cleaned up by the kernel automatically.
    ///
    /// Available since Linux 5.1.
    pub fn unregister_buffers(&self) -> io::Result<()> {
        execute(
            self.fd.as_raw_fd(),
            sys::IORING_UNREGISTER_BUFFERS,
            ptr::null(),
            0,
        )
        .map(drop)
    }

    /// Unregister all previously registered files.
    ///
    /// You do not need to explicitly call this before dropping the [`IoUring`](crate::IoUring), as
    /// it will be cleaned up by the kernel automatically.
    pub fn unregister_files(&self) -> io::Result<()> {
        execute(
            self.fd.as_raw_fd(),
            sys::IORING_UNREGISTER_FILES,
            ptr::null(),
            0,
        )
        .map(drop)
    }

    /// Unregister an eventfd file descriptor to stop notifications.
    pub fn unregister_eventfd(&self) -> io::Result<()> {
        execute(
            self.fd.as_raw_fd(),
            sys::IORING_UNREGISTER_EVENTFD,
            ptr::null(),
            0,
        )
        .map(drop)
    }

    /// Unregister a previously registered personality.
    pub fn unregister_personality(&self, personality: u16) -> io::Result<()> {
        execute(
            self.fd.as_raw_fd(),
            sys::IORING_UNREGISTER_PERSONALITY,
            ptr::null(),
            personality as _,
        )
        .map(drop)
    }

    /// Permanently install a feature allowlist. Once this has been called, attempting to perform
    /// an operation not on the allowlist will fail with `-EACCES`.
    ///
    /// This can only be called once, to prevent untrusted code from removing restrictions.
    pub fn register_restrictions(&self, res: &mut [Restriction]) -> io::Result<()> {
        execute(
            self.fd.as_raw_fd(),
            sys::IORING_REGISTER_RESTRICTIONS,
            res.as_mut_ptr().cast(),
            res.len() as _,
        )
        .map(drop)
    }

    /// Enable the rings of the io_uring instance if they have been disabled with
    /// [`setup_r_disabled`](crate::Builder::setup_r_disabled).
    pub fn register_enable_rings(&self) -> io::Result<()> {
        execute(
            self.fd.as_raw_fd(),
            sys::IORING_REGISTER_ENABLE_RINGS,
            ptr::null(),
            0,
        )
        .map(drop)
    }

    /// Tell io_uring on what CPUs the async workers can run. By default, async workers
    /// created by io_uring will inherit the CPU mask of its parent. This is usually
    /// all the CPUs in the system, unless the parent is being run with a limited set.
    pub fn register_iowq_aff(&self, cpu_set: &libc::cpu_set_t) -> io::Result<()> {
        execute(
            self.fd.as_raw_fd(),
            sys::IORING_REGISTER_IOWQ_AFF,
            cpu_set as *const _ as *const libc::c_void,
            mem::size_of::<libc::cpu_set_t>() as u32,
        )
        .map(drop)
    }

    /// Undoes a CPU mask previously set with register_iowq_aff
    pub fn unregister_iowq_aff(&self) -> io::Result<()> {
        execute(
            self.fd.as_raw_fd(),
            sys::IORING_UNREGISTER_IOWQ_AFF,
            ptr::null(),
            0,
        )
        .map(drop)
    }

    /// Get and/or set the limit for number of io_uring worker threads per NUMA
    /// node. `max[0]` holds the limit for bounded workers, which process I/O
    /// operations expected to be bound in time, that is I/O on regular files or
    /// block devices. While `max[1]` holds the limit for unbounded workers,
    /// which carry out I/O operations that can never complete, for instance I/O
    /// on sockets. Passing `0` does not change the current limit. Returns
    /// previous limits on success.
    pub fn register_iowq_max_workers(&self, max: &mut [u32; 2]) -> io::Result<()> {
        execute(
            self.fd.as_raw_fd(),
            sys::IORING_REGISTER_IOWQ_MAX_WORKERS,
            max.as_mut_ptr().cast(),
            max.len() as _,
        )
        .map(drop)
    }

    /// Register buffer ring for provided buffers.
    ///
    /// Details can be found in the io_uring_register_buf_ring.3 man page.
    ///
    /// If the register command is not supported, or the ring_entries value exceeds
    /// 32768, the InvalidInput error is returned.
    ///
    /// Available since 5.19.
    ///
    /// # Safety
    ///
    /// Developers must ensure that the `ring_addr` and its length represented by `ring_entries`
    /// are valid and will be valid until the bgid is unregistered or the ring destroyed,
    /// otherwise undefined behaviour may occur.
    #[deprecated(note = "please use `register_buf_ring_with_flags` instead")]
    pub unsafe fn register_buf_ring(
        &self,
        ring_addr: u64,
        ring_entries: u16,
        bgid: u16,
    ) -> io::Result<()> {
        self.register_buf_ring_with_flags(ring_addr, ring_entries, bgid, 0)
    }

    /// Register buffer ring for provided buffers.
    ///
    /// Details can be found in the io_uring_register_buf_ring.3 man page.
    ///
    /// If the register command is not supported, or the ring_entries value exceeds
    /// 32768, the InvalidInput error is returned.
    ///
    /// Available since 5.19.
    ///
    /// # Safety
    ///
    /// Developers must ensure that the `ring_addr` and its length represented by `ring_entries`
    /// are valid and will be valid until the bgid is unregistered or the ring destroyed,
    /// otherwise undefined behaviour may occur.
    pub unsafe fn register_buf_ring_with_flags(
        &self,
        ring_addr: u64,
        ring_entries: u16,
        bgid: u16,
        flags: u16,
    ) -> io::Result<()> {
        // The interface type for ring_entries is u32 but the same interface only allows a u16 for
        // the tail to be specified, so to try and avoid further confusion, we limit the
        // ring_entries to u16 here too. The value is actually limited to 2^15 (32768) but we can
        // let the kernel enforce that.
        let arg = sys::io_uring_buf_reg {
            ring_addr,
            ring_entries: ring_entries as _,
            bgid,
            flags,
            ..Default::default()
        };
        execute(
            self.fd.as_raw_fd(),
            sys::IORING_REGISTER_PBUF_RING,
            cast_ptr::<sys::io_uring_buf_reg>(&arg).cast(),
            1,
        )
        .map(drop)
    }

    /// Unregister a previously registered buffer ring.
    ///
    /// Available since 5.19.
    pub fn unregister_buf_ring(&self, bgid: u16) -> io::Result<()> {
        let arg = sys::io_uring_buf_reg {
            ring_addr: 0,
            ring_entries: 0,
            bgid,
            ..Default::default()
        };
        execute(
            self.fd.as_raw_fd(),
            sys::IORING_UNREGISTER_PBUF_RING,
            cast_ptr::<sys::io_uring_buf_reg>(&arg).cast(),
            1,
        )
        .map(drop)
    }

    /// Performs a synchronous cancellation request, similar to [AsyncCancel](crate::opcode::AsyncCancel),
    /// except that it completes synchronously.
    ///
    /// Cancellation can target a specific request, or all requests matching some criteria. The
    /// [`CancelBuilder`] builder supports describing the match criteria for cancellation.
    ///
    /// An optional `timeout` can be provided to specify how long to wait for matched requests to be
    /// canceled. If no timeout is provided, the default is to wait indefinitely.
    ///
    /// ### Errors
    ///
    /// If no requests are matched, returns:
    ///
    /// [io::ErrorKind::NotFound]: `No such file or directory (os error 2)`
    ///
    /// If a timeout is supplied, and the timeout elapses prior to all requests being canceled, returns:
    ///
    /// [io::ErrorKind::Uncategorized]: `Timer expired (os error 62)`
    ///
    /// ### Notes
    ///
    /// Only requests which have been submitted to the ring will be considered for cancellation. Requests
    /// which have been written to the SQ, but not submitted, will not be canceled.
    ///
    /// Available since 6.0.
    pub fn register_sync_cancel(
        &self,
        timeout: Option<Timespec>,
        builder: CancelBuilder,
    ) -> io::Result<()> {
        let timespec = timeout.map(|ts| ts.0).unwrap_or(sys::__kernel_timespec {
            tv_sec: -1,
            tv_nsec: -1,
        });
        let user_data = builder.user_data.unwrap_or(0);
        let flags = builder.flags.bits();
        let fd = builder.to_fd();

        let arg = sys::io_uring_sync_cancel_reg {
            addr: user_data,
            fd,
            flags,
            timeout: timespec,
            ..Default::default()
        };

        execute(
            self.fd.as_raw_fd(),
            sys::IORING_REGISTER_SYNC_CANCEL,
            cast_ptr::<sys::io_uring_sync_cancel_reg>(&arg).cast(),
            1,
        )
        .map(drop)
    }

    /// Register a netdev hw rx queue for zerocopy.
    ///
    /// Available since 6.15.
    pub fn register_ifq(&self, reg: &sys::io_uring_zcrx_ifq_reg) -> io::Result<()> {
        execute(
            self.fd.as_raw_fd(),
            sys::IORING_REGISTER_ZCRX_IFQ,
            cast_ptr::<sys::io_uring_zcrx_ifq_reg>(reg) as _,
            1,
        )
        .map(drop)
    }
}