imxrt-ral 0.2.1-alpha

Register access layer for all NXP i.MX RT microcontrollers
Documentation
#![allow(non_snake_case, non_upper_case_globals)]
#![allow(non_camel_case_types)]
//! IOMUXC
//!
//! Used by: imxrt1011, imxrt1015

use crate::{RORegister, RWRegister};
#[cfg(not(feature = "nosync"))]
use core::marker::PhantomData;

/// GPR0 General Purpose Register
pub mod GPR0 {}

/// GPR1 General Purpose Register
pub mod GPR1 {}

/// GPR2 General Purpose Register
pub mod GPR2 {}

/// GPR3 General Purpose Register
pub mod GPR3 {

    /// Set to enable LPSR mode.
    pub mod LPSR_MODE_ENABLE {
        /// Offset (0 bits)
        pub const offset: u32 = 0;
        /// Mask (1 bit: 1 << 0)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// DCDC captured status clear
    pub mod DCDC_STATUS_CAPT_CLR {
        /// Offset (1 bits)
        pub const offset: u32 = 1;
        /// Mask (1 bit: 1 << 1)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// POR_B pad control
    pub mod POR_PULL_TYPE {
        /// Offset (2 bits)
        pub const offset: u32 = 2;
        /// Mask (2 bits: 0b11 << 2)
        pub const mask: u32 = 0b11 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// DCDC_IN low voltage detect.
    pub mod DCDC_IN_LOW_VOL {
        /// Offset (16 bits)
        pub const offset: u32 = 16;
        /// Mask (1 bit: 1 << 16)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// DCDC output over current alert
    pub mod DCDC_OVER_CUR {
        /// Offset (17 bits)
        pub const offset: u32 = 17;
        /// Mask (1 bit: 1 << 17)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// DCDC output over voltage alert
    pub mod DCDC_OVER_VOL {
        /// Offset (18 bits)
        pub const offset: u32 = 18;
        /// Mask (1 bit: 1 << 18)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// DCDC status OK
    pub mod DCDC_STS_DC_OK {
        /// Offset (19 bits)
        pub const offset: u32 = 19;
        /// Mask (1 bit: 1 << 19)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }
}
#[repr(C)]
pub struct RegisterBlock {
    /// GPR0 General Purpose Register
    pub GPR0: RORegister<u32>,

    /// GPR1 General Purpose Register
    pub GPR1: RORegister<u32>,

    /// GPR2 General Purpose Register
    pub GPR2: RORegister<u32>,

    /// GPR3 General Purpose Register
    pub GPR3: RWRegister<u32>,
}
pub struct ResetValues {
    pub GPR0: u32,
    pub GPR1: u32,
    pub GPR2: u32,
    pub GPR3: u32,
}
#[cfg(not(feature = "nosync"))]
pub struct Instance {
    pub(crate) addr: u32,
    pub(crate) _marker: PhantomData<*const RegisterBlock>,
}
#[cfg(not(feature = "nosync"))]
impl ::core::ops::Deref for Instance {
    type Target = RegisterBlock;
    #[inline(always)]
    fn deref(&self) -> &RegisterBlock {
        unsafe { &*(self.addr as *const _) }
    }
}
#[cfg(feature = "rtfm")]
unsafe impl Send for Instance {}