ic_ec/

ed25519.rs

//! RFC 8032 Ed25519 signatures.
//!
//! Points use extended twisted Edwards coordinates `(X : Y : Z : T)` with
//! `a = -1`. Because `d` is a non-square in GF(2^255-19), the
//! `add-2008-hwcd-3` formula is *complete*: it is correct for every input pair,
//! including doubling and the identity. That is what lets scalar multiplication
//! be a single branch-free loop with no exceptional cases to special-case, and
//! no timing signal from the shape of the scalar.

use crate::field::Fe;
use crate::scalar;
use ic_core::ct::Choice;

// The precomputed basepoint table. See the module for why it is `std` only.
mod basepoint_table;
use ic_core::traits::{Algorithm, Digest, SelfTest, SignatureScheme};
use ic_core::{ensure, Result, Zeroize};
use ic_hash::Sha512;

/// The compressed encoding of the Ed25519 base point.
const BASEPOINT_COMPRESSED: [u8; 32] = [
    0x58, 0x66, 0x66, 0x66, 0x66, 0x66, 0x66, 0x66, 0x66, 0x66, 0x66, 0x66, 0x66, 0x66, 0x66, 0x66,
    0x66, 0x66, 0x66, 0x66, 0x66, 0x66, 0x66, 0x66, 0x66, 0x66, 0x66, 0x66, 0x66, 0x66, 0x66, 0x66,
];

/// The curve constant `d = -121665/121666`, as 51-bit limbs.
const D: Fe = Fe([
    929_955_233_495_203,
    466_365_720_129_213,
    1_662_059_464_998_953,
    2_033_849_074_728_123,
    1_442_794_654_840_575,
]);

/// `2*d`, used directly by the addition formula.
const D2: Fe = Fe([
    1_859_910_466_990_425,
    932_731_440_258_426,
    1_072_319_116_312_658,
    1_815_898_335_770_999,
    633_789_495_995_903,
]);

/// A square root of -1 in GF(2^255-19), needed for point decompression.
const SQRT_M1: Fe = Fe([
    1_718_705_420_411_056,
    234_908_883_556_509,
    2_233_514_472_574_048,
    2_117_202_627_021_982,
    765_476_049_583_133,
]);

/// A point in extended twisted Edwards coordinates.
#[derive(Clone, Copy, Debug)]
pub struct Point {
    x: Fe,
    y: Fe,
    z: Fe,
    t: Fe,
}

/// A point part-way through a group operation: `(X : Y : Z : T)` standing for
/// the affine point `(X/Z, Y/T)`.
///
/// Both the doubling and the addition formulas naturally produce this form --
/// it is what they compute before the four multiplications that put the result
/// back into extended coordinates. Keeping it is what makes a chain of
/// doublings cheaper: a doubling reads only `X`, `Y` and `Z`, so on the way to
/// another doubling the `T` those four multiplications would produce is never
/// read, and three of them suffice instead of four.
#[derive(Clone, Copy)]
pub(crate) struct Completed {
    x: Fe,
    y: Fe,
    z: Fe,
    t: Fe,
}

/// `(X : Y : Z)`, standing for `(X/Z, Y/Z)`. No `T`.
///
/// What a doubling needs and all it needs.
#[derive(Clone, Copy)]
pub(crate) struct Projective {
    x: Fe,
    y: Fe,
    z: Fe,
}

/// A point rearranged for addition: `(Y+X, Y-X, Z, 2d·T)`.
///
/// The addition formula wants those four quantities and nothing else, so a
/// point that will be added many times -- every entry of every table here --
/// stores them instead of `(X, Y, Z, T)`. That turns an addition from nine
/// multiplications into four: the two sums and differences are already formed,
/// and `2d·T` has already been scaled.
#[derive(Clone, Copy)]
pub(crate) struct Niels {
    ypx: Fe,
    ymx: Fe,
    z: Fe,
    t2d: Fe,
}

/// A point with `Z = 1`, rearranged for addition: `(y+x, y-x, 2d·x·y)`.
///
/// [`Niels`] without the `Z`, which removes the one multiplication that used
/// it. Worth the field inversion it costs to build, for a table entry that
/// will be added sixty-four times per signature and never changes.
#[derive(Clone, Copy)]
pub(crate) struct AffineNiels {
    ypx: Fe,
    ymx: Fe,
    t2d: Fe,
}

impl AffineNiels {
    /// The neutral element: `x = 0`, `y = 1`.
    pub(crate) const IDENTITY: AffineNiels = AffineNiels {
        ypx: Fe::ONE,
        ymx: Fe::ONE,
        t2d: Fe::ZERO,
    };

    /// Negation swaps the sums and differences and negates `2d·x·y`, which is
    /// what `-(x, y) = (-x, y)` comes to in this form.
    pub(crate) fn conditional_negate(&mut self, choice: Choice) {
        let swapped_p = self.ymx;
        let swapped_m = self.ypx;
        let nt = self.t2d.neg();
        Fe::cmov(&mut self.ypx, &swapped_p, choice);
        Fe::cmov(&mut self.ymx, &swapped_m, choice);
        Fe::cmov(&mut self.t2d, &nt, choice);
    }

    pub(crate) fn cmov(&mut self, other: &AffineNiels, choice: Choice) {
        Fe::cmov(&mut self.ypx, &other.ypx, choice);
        Fe::cmov(&mut self.ymx, &other.ymx, choice);
        Fe::cmov(&mut self.t2d, &other.t2d, choice);
    }
}

impl Completed {
    /// Drop to `(X : Y : Z)`, which is three multiplications.
    fn to_projective(self) -> Projective {
        Projective {
            x: self.x.mul(&self.t),
            y: self.y.mul(&self.z),
            z: self.z.mul(&self.t),
        }
    }

    /// Back to extended coordinates, which is four.
    ///
    /// Only needed before an addition, since that is the only operation that
    /// reads `T`.
    fn to_extended(self) -> Point {
        Point {
            x: self.x.mul(&self.t),
            y: self.y.mul(&self.z),
            z: self.z.mul(&self.t),
            t: self.x.mul(&self.y),
        }
    }
}

impl Projective {
    /// Recover extended coordinates from projective ones.
    ///
    /// `(X : Y : Z)` stands for `(X/Z, Y/Z)`, and extended coordinates want
    /// `T` with `X*Y = T*Z`, so `T = X*Y/Z`. Only needed once, at the end.
    fn to_extended_from_projective(self) -> Point {
        // Four multiplications, not an inversion. `(X : Y : Z)` stands for
        // `(X/Z, Y/Z)`, and extended coordinates want `T` with `X*Y = T*Z`;
        // scaling every coordinate by `Z` gives `(XZ : YZ : Z^2 : XY)`, which
        // satisfies that directly. Dividing through by `Z` instead would be an
        // exponentiation -- about two hundred and fifty squarings -- to reach
        // the same point in a representation nothing here needs.
        Point {
            x: self.x.mul(&self.z),
            y: self.y.mul(&self.z),
            z: self.z.square(),
            t: self.x.mul(&self.y),
        }
    }

    /// Double and stay projective, without writing the completed form out.
    ///
    /// The same arithmetic as `double()` followed by
    /// [`Completed::to_projective`], with the intermediate kept in locals. A
    /// `Completed` is four field elements, 160 bytes, and in a chain of
    /// doublings it exists only to be consumed by the very next statement;
    /// spilling and reloading it is pure traffic. This is the path taken at
    /// every position where the recoding has nothing to add, which is most of
    /// them.
    fn double_projective(self) -> Projective {
        let xx = self.x.square();
        let yy = self.y.square();
        let zz2 = {
            let t = self.z.square();
            t.add(&t)
        };
        let xy_sq = self.x.add(&self.y).square();
        let yy_plus_xx = yy.add(&xx);
        let yy_minus_xx = yy.sub(&xx);

        let cx = xy_sq.sub(&yy_plus_xx);
        let cy = yy_plus_xx;
        let cz = yy_minus_xx;
        let ct = zz2.sub(&yy_minus_xx);

        Projective {
            x: cx.mul(&ct),
            y: cy.mul(&cz),
            z: cz.mul(&ct),
        }
    }

    /// `dbl-2008-hwcd` for `a = -1`, stopping at the completed form.
    ///
    /// Four squarings and no multiplications at all: every multiplication in a
    /// doubling belongs to the conversion out of the completed form, which is
    /// why it is worth not doing that conversion in full.
    fn double(&self) -> Completed {
        let xx = self.x.square();
        let yy = self.y.square();
        let zz2 = {
            let t = self.z.square();
            t.add(&t)
        };
        let xy_sq = self.x.add(&self.y).square();
        let yy_plus_xx = yy.add(&xx);
        let yy_minus_xx = yy.sub(&xx);
        Completed {
            x: xy_sq.sub(&yy_plus_xx),
            y: yy_plus_xx,
            z: yy_minus_xx,
            t: zz2.sub(&yy_minus_xx),
        }
    }
}

impl Point {
    /// The neutral element `(0, 1)`.
    pub const IDENTITY: Point = Point {
        x: Fe::ZERO,
        y: Fe::ONE,
        z: Fe::ONE,
        t: Fe::ZERO,
    };

    /// The complete `add-2008-hwcd-3` group law for `a = -1`.
    pub fn add(&self, other: &Point) -> Point {
        let a = self.y.sub(&self.x).mul(&other.y.sub(&other.x));
        let b = self.y.add(&self.x).mul(&other.y.add(&other.x));
        let c = self.t.mul(&D2).mul(&other.t);
        let d = self.z.mul(&other.z);
        let d = d.add(&d);

        let e = b.sub(&a);
        let f = d.sub(&c);
        let g = d.add(&c);
        let h = b.add(&a);

        Point {
            x: e.mul(&f),
            y: g.mul(&h),
            t: e.mul(&h),
            z: f.mul(&g),
        }
    }

    /// Point doubling, `dbl-2008-hwcd` for `a = -1`.
    ///
    /// Adding a point to itself works and was what this did, but the general
    /// addition costs nine multiplications and needs both operands' `T`. The
    /// dedicated formula is four multiplications and four squarings, and does
    /// not read `T` at all -- doubling is a function of `X`, `Y` and `Z` alone.
    ///
    /// Worth the separate formula because scalar multiplication is doublings
    /// almost entirely: the non-adjacent form leaves about forty additions
    /// against two hundred and fifty-six doublings.
    pub fn double(&self) -> Point {
        let aa = self.x.square();
        let bb = self.y.square();
        let c = self.z.square();
        let c = c.add(&c);
        // a = -1, so D = a*A = -A.
        let d = aa.neg();
        // E = (X+Y)^2 - A - B, which is 2*X*Y without a multiplication.
        let xy = self.x.add(&self.y);
        let e = xy.square().sub(&aa).sub(&bb);
        let g = d.add(&bb);
        let f = g.sub(&c);
        let h = d.sub(&bb);

        Point {
            x: e.mul(&f),
            y: g.mul(&h),
            t: e.mul(&h),
            z: f.mul(&g),
        }
    }

    /// Drop `T`, which a doubling does not read.
    fn to_projective(self) -> Projective {
        Projective {
            x: self.x,
            y: self.y,
            z: self.z,
        }
    }

    /// Rearrange for repeated addition. See [`Niels`].
    fn to_niels(self) -> Niels {
        Niels {
            ypx: self.y.add(&self.x),
            ymx: self.y.sub(&self.x),
            z: self.z,
            t2d: self.t.mul(&D2),
        }
    }

    /// `self + other`, in four multiplications, stopping at the completed form.
    ///
    /// The same `add-2008-hwcd-3` group law [`Point::add`] uses. It costs four
    /// rather than nine because `other` arrives with its sums, differences and
    /// `2d·T` already formed, and because the result is left completed rather
    /// than converted back.
    fn add_niels(&self, other: &Niels) -> Completed {
        let pp = self.y.add(&self.x).mul(&other.ypx);
        let mm = self.y.sub(&self.x).mul(&other.ymx);
        let tt2d = self.t.mul(&other.t2d);
        let zz = self.z.mul(&other.z);
        let zz2 = zz.add(&zz);
        Completed {
            x: pp.sub(&mm),
            y: pp.add(&mm),
            z: zz2.add(&tt2d),
            t: zz2.sub(&tt2d),
        }
    }

    /// `self - other`.
    ///
    /// Negating a Niels point swaps its sums and differences and negates
    /// `2d·T`, which is cheaper than negating the point it came from and
    /// rebuilding it.
    fn sub_niels(&self, other: &Niels) -> Completed {
        let pp = self.y.add(&self.x).mul(&other.ymx);
        let mm = self.y.sub(&self.x).mul(&other.ypx);
        let tt2d = self.t.mul(&other.t2d);
        let zz = self.z.mul(&other.z);
        let zz2 = zz.add(&zz);
        Completed {
            x: pp.sub(&mm),
            y: pp.add(&mm),
            z: zz2.sub(&tt2d),
            t: zz2.add(&tt2d),
        }
    }

    /// Rearrange for repeated addition, with `Z` divided out. See
    /// [`AffineNiels`].
    ///
    /// Costs a field inversion, which is why it is done when a table is built
    /// and never on a hot path.
    pub(crate) fn to_affine_niels(self) -> AffineNiels {
        let z_inv = self.z.invert();
        let x = self.x.mul(&z_inv);
        let y = self.y.mul(&z_inv);
        AffineNiels {
            ypx: y.add(&x),
            ymx: y.sub(&x),
            t2d: x.mul(&y).mul(&D2),
        }
    }

    /// `self + other`, in three multiplications.
    ///
    /// One fewer than [`Point::add_niels`]: `other` has `Z = 1`, so the
    /// product of the two `Z`s is just this one's, doubled.
    pub(crate) fn add_affine_niels(&self, other: &AffineNiels) -> Completed {
        let pp = self.y.add(&self.x).mul(&other.ypx);
        let mm = self.y.sub(&self.x).mul(&other.ymx);
        let tt2d = self.t.mul(&other.t2d);
        let zz2 = self.z.add(&self.z);
        Completed {
            x: pp.sub(&mm),
            y: pp.add(&mm),
            z: zz2.add(&tt2d),
            t: zz2.sub(&tt2d),
        }
    }

    /// `self - other`, for an affine Niels point.
    ///
    /// Negating one of these swaps its sums and differences and negates
    /// `2d·x·y`, so the subtraction is the addition with two operands
    /// exchanged and one sign flipped. Doing it here rather than by negating a
    /// copy of the table entry avoids copying it at all -- an entry is three
    /// field elements, and the variable-time path has no reason to touch it
    /// with conditional moves.
    pub(crate) fn sub_affine_niels(&self, other: &AffineNiels) -> Completed {
        let pp = self.y.add(&self.x).mul(&other.ymx);
        let mm = self.y.sub(&self.x).mul(&other.ypx);
        let tt2d = self.t.mul(&other.t2d);
        let zz2 = self.z.add(&self.z);
        Completed {
            x: pp.sub(&mm),
            y: pp.add(&mm),
            z: zz2.sub(&tt2d),
            t: zz2.add(&tt2d),
        }
    }

    /// Constant-time conditional move.
    fn cmov(&mut self, other: &Point, choice: Choice) {
        Fe::cmov(&mut self.x, &other.x, choice);
        Fe::cmov(&mut self.y, &other.y, choice);
        Fe::cmov(&mut self.z, &other.z, choice);
        Fe::cmov(&mut self.t, &other.t, choice);
    }

    /// Scalar multiplication, constant-time in the scalar.
    ///
    /// Every iteration performs a doubling *and* an addition, selecting between
    /// the two results with a conditional move, so the instruction trace is
    /// identical for every scalar.
    pub fn mul_scalar(&self, s: &[u8; 32]) -> Point {
        let mut acc = Point::IDENTITY;
        for i in (0..256).rev() {
            acc = acc.double();
            let sum = acc.add(self);
            let bit = Choice::from_u8((s[i / 8] >> (i % 8)) & 1);
            acc.cmov(&sum, bit);
        }
        acc
    }

    /// Negate: `-(x, y, z, t)` is `(-x, y, z, -t)`.
    fn negate(&self) -> Point {
        Point {
            x: self.x.neg(),
            y: self.y,
            z: self.z,
            t: self.t.neg(),
        }
    }

    /// Scalar multiplication that is **not** constant time.
    ///
    /// # When this is allowed
    ///
    /// Only on values an attacker already has. Verification is the case: the
    /// signature, the public key and the message are all public, so there is no
    /// secret whose timing could leak, and the constant-time ladder buys
    /// nothing there but work. Signing must never call this -- the scalar is
    /// derived from the seed.
    ///
    /// # What it does instead
    ///
    /// A width-5 non-adjacent form. Recoding the scalar into signed odd digits
    /// leaves roughly one position in six non-zero, so the additions drop from
    /// one per bit to about forty in total; the doublings remain, because an
    /// arbitrary point has no precomputed table to take them away. Only odd
    /// multiples are stored, eight of them, since a negative digit negates on
    /// the way out.
    ///
    /// The saving is real but bounded: the doublings dominate and they cannot
    /// be avoided here. The basepoint half of verification is the one that got
    /// a table.
    pub fn mul_scalar_vartime(&self, scalar: &[u8; 32]) -> Point {
        // 1P, 3P, 5P .. 15P.
        let twice = self.double();
        let mut odd = [*self; 8];
        for i in 1..8 {
            odd[i] = odd[i - 1].add(&twice);
        }

        let naf = wnaf5(scalar);
        let mut acc = Point::IDENTITY;
        for digit in naf.iter().rev() {
            acc = acc.double();
            if *digit != 0 {
                // digit is odd and in [-15, 15]; |digit|/2 indexes the table.
                let entry = &odd[(digit.unsigned_abs() as usize) / 2];
                acc = if *digit > 0 {
                    acc.add(entry)
                } else {
                    acc.add(&entry.negate())
                };
            }
        }
        acc
    }

    /// Whether two points are the same, without leaving projective space.
    ///
    /// `(X : Y : Z)` stands for the affine point `(X/Z, Y/Z)`, so two are equal
    /// exactly when `X1*Z2 == X2*Z1` and `Y1*Z2 == Y2*Z1`. That is four
    /// multiplications.
    ///
    /// The obvious alternative is to compress both and compare the bytes, and
    /// that is what verification used to do -- but compression divides by `Z`,
    /// and a division here is an exponentiation: roughly two hundred and fifty
    /// squarings each, five hundred to answer a question four multiplications
    /// settle.
    ///
    /// `to_bytes` is used only to canonicalise the two sides before comparing,
    /// which costs a carry chain and no inversion.
    fn eq_projective(&self, other: &Point) -> bool {
        self.x.mul(&other.z).to_bytes() == other.x.mul(&self.z).to_bytes()
            && self.y.mul(&other.z).to_bytes() == other.y.mul(&self.z).to_bytes()
    }

    /// Compress to the 32-byte RFC 8032 encoding.
    pub fn compress(&self) -> [u8; 32] {
        let z_inv = self.z.invert();
        let x = self.x.mul(&z_inv);
        let y = self.y.mul(&z_inv);
        let mut out = y.to_bytes();
        // The sign of x rides in the top bit.
        out[31] |= x.is_negative().unwrap_u8() << 7;
        out
    }

    /// Decompress a 32-byte encoding, rejecting non-curve points.
    pub fn decompress(bytes: &[u8; 32]) -> Option<Point> {
        let sign = Choice::from_u8(bytes[31] >> 7);
        let mut y_bytes = *bytes;
        y_bytes[31] &= 0x7f;
        let y = Fe::from_bytes(&y_bytes);

        // Solve x^2 = (y^2 - 1) / (d*y^2 + 1).
        let y2 = y.square();
        let u = y2.sub(&Fe::ONE);
        let v = y2.mul(&D).add(&Fe::ONE);

        // x = u*v^3 * (u*v^7)^((p-5)/8)
        let v3 = v.square().mul(&v);
        let v7 = v3.square().mul(&v);
        let mut x = u.mul(&v3).mul(&u.mul(&v7).pow22523());

        let check = v.mul(&x.square());
        let correct = check.ct_eq(&u);
        let flipped = check.ct_eq(&u.neg());
        if !bool::from(correct.or(flipped)) {
            // No square root exists: the encoding is not a curve point.
            return None;
        }
        // When only the flipped case matched, multiply by sqrt(-1).
        let alt = x.mul(&SQRT_M1);
        Fe::cmov(&mut x, &alt, flipped.and(correct.not()));

        // x = 0 with a set sign bit is the one non-canonical encoding.
        if bool::from(x.is_zero()) && bool::from(sign) {
            return None;
        }
        // Match the requested sign.
        let neg = x.neg();
        let wrong_sign = Choice::from_u8(x.is_negative().unwrap_u8() ^ sign.unwrap_u8());
        Fe::cmov(&mut x, &neg, wrong_sign);

        Some(Point {
            x,
            y,
            z: Fe::ONE,
            t: x.mul(&y),
        })
    }
}

/// The Ed25519 base point.
/// `scalar * B`, through the precomputed table where there is one.
///
/// Every basepoint multiplication in this module goes through here rather than
/// calling `mul_scalar` on the basepoint directly, so the two paths cannot
/// drift apart and a caller cannot accidentally take the slow one.
fn mul_basepoint(scalar: &[u8; 32]) -> Point {
    #[cfg(feature = "std")]
    {
        basepoint_table::table().mul(scalar)
    }
    #[cfg(not(feature = "std"))]
    {
        basepoint().mul_scalar(scalar)
    }
}

/// `[k]A + [s]B`, in one pass, variable time in both scalars.
///
/// Verification needs two scalar multiplications and then compares the
/// results. Done separately that is two independent runs of doublings -- and
/// the doublings are the whole cost, some two hundred and fifty-five of them
/// against forty-odd additions. Run together they are shared: one chain of
/// doublings, with each scalar contributing an addition at the positions where
/// its own recoding is non-zero.
///
/// The basepoint half also stops paying for constant time here. `mul_basepoint`
/// selects a table entry by reading all eight and moving conditionally, because
/// a signing scalar is secret. Nothing in a verification is: the signature, the
/// public key and the message are all in the clear, so the table is indexed
/// directly and the window widened to eight, which is a table built once and
/// about a third as many additions.
///
/// Both properties are why this is not the function signing calls.
/// [`double_scalar_mul_vartime`], reachable from the benchmark.
///
/// The benchmark lives outside this workspace and cannot see private items,
/// and comparing whole signatures cannot separate "our field arithmetic is
/// slower" from "our scalar multiplication does more work". This is how that
/// question gets answered rather than guessed at.
#[cfg(feature = "std")]
#[doc(hidden)]
pub fn double_scalar_mul_vartime_for_bench(a: &Point, k: &[u8; 32], s: &[u8; 32]) -> Point {
    double_scalar_mul_vartime(a, k, s)
}

#[cfg(feature = "std")]
fn double_scalar_mul_vartime(a: &Point, k: &[u8; 32], s: &[u8; 32]) -> Point {
    // 1A, 3A, 5A .. 15A, in Niels form, built for this call.
    let twice = a.double();
    let mut odd = [*a; 8];
    for i in 1..8 {
        odd[i] = odd[i - 1].add(&twice);
    }
    let odd_a: [Niels; 8] = core::array::from_fn(|i| odd[i].to_niels());
    let odd_b = basepoint_table::odd_multiples();

    let naf_a = wnaf(k, 5);
    let naf_b = wnaf(s, 8);

    // Start at the highest position either recoding reaches, so the leading
    // doublings of the identity are skipped.
    let mut i = 257;
    while i > 0 && naf_a[i] == 0 && naf_b[i] == 0 {
        i -= 1;
    }

    // The accumulator is carried in whichever form the next step wants: a
    // doubling reads only X, Y and Z, and an addition is the only thing that
    // reads T. So a position with no addition pays three multiplications to
    // come out of the completed form instead of four.
    let mut acc = Point::IDENTITY.to_projective();
    loop {
        // Nothing to add here, which is the common case: double straight back
        // to projective without materialising the completed form.
        if naf_a[i] == 0 && naf_b[i] == 0 {
            acc = acc.double_projective();
            if i == 0 {
                return acc.to_extended_from_projective();
            }
            i -= 1;
            continue;
        }
        let mut t = acc.double();
        if naf_a[i] != 0 {
            let e = t.to_extended();
            let n = &odd_a[(naf_a[i].unsigned_abs() as usize) / 2];
            t = if naf_a[i] > 0 {
                e.add_niels(n)
            } else {
                e.sub_niels(n)
            };
        }
        if naf_b[i] != 0 {
            let e = t.to_extended();
            let n = &odd_b[(naf_b[i].unsigned_abs() as usize) / 2];
            t = if naf_b[i] > 0 {
                e.add_affine_niels(n)
            } else {
                e.sub_affine_niels(n)
            };
        }
        if i == 0 {
            return t.to_extended();
        }
        acc = t.to_projective();
        i -= 1;
    }
}

/// [`mul_basepoint`], reachable from the benchmark. See
/// [`double_scalar_mul_vartime_for_bench`].
#[doc(hidden)]
pub fn mul_basepoint_for_bench(scalar: &[u8; 32]) -> Point {
    mul_basepoint(scalar)
}

fn basepoint() -> Point {
    // The encoding is a compile-time constant and is known to be valid, so the
    // decompression cannot fail.
    Point::decompress(&BASEPOINT_COMPRESSED).unwrap_or(Point::IDENTITY)
}

/// RFC 8032 Ed25519 (PureEdDSA over Curve25519 with SHA-512).
pub struct Ed25519;

impl Algorithm for Ed25519 {
    const ID: &'static str = "ed25519";
    const NAME: &'static str = "Ed25519";
}

/// Expand a 32-byte seed into the clamped scalar and the nonce prefix.
fn expand_seed(seed: &[u8]) -> ([u8; 32], [u8; 32]) {
    let h = Sha512::digest(seed);
    let mut a = [0u8; 32];
    let mut prefix = [0u8; 32];
    a.copy_from_slice(&h.as_ref()[..32]);
    prefix.copy_from_slice(&h.as_ref()[32..]);
    a[0] &= 248;
    a[31] &= 127;
    a[31] |= 64;
    (a, prefix)
}

/// Width-5 non-adjacent form of a 256-bit scalar.
///
/// Each non-zero digit is odd and lies in `[-15, 15]`, and no two non-zero
/// digits are adjacent, which is what keeps the density near one in six. The
/// array has room to run past the top of the scalar.
///
/// Variable time by construction: the loop length and the digit pattern depend
/// on the scalar. See [`Point::mul_scalar_vartime`] for when that is allowed.
fn wnaf5(scalar: &[u8; 32]) -> [i8; 258] {
    wnaf(scalar, 5)
}

/// Width-`w` non-adjacent form of a 256-bit scalar.
///
/// Each non-zero digit is odd and lies in `[-(2^(w-1) - 1), 2^(w-1) - 1]`, and
/// no two non-zero digits are within `w` places of each other, which puts the
/// density near `1/(w+1)`. A wider window means fewer additions and a bigger
/// table: width 5 for an arbitrary point, whose table has to be built on the
/// spot, and width 8 for the basepoint, whose table is built once.
///
/// `w` must be at most 8, so that every digit fits an `i8`.
fn wnaf(scalar: &[u8; 32], w: u32) -> [i8; 258] {
    debug_assert!((2..=8).contains(&w), "window width out of range");
    let half = 1i64 << (w - 1);
    let full = 1i64 << w;
    let mask = (full - 1) as u64;

    let mut naf = [0i8; 258];
    // Five limbs for a four-limb scalar. A negative digit adds to `k`, and for
    // a scalar near 2^256 that carries out of the top: on four limbs it wraps
    // to zero, the loop stops early, and the representation is silently short.
    // The scalars that reach this are reduced modulo the group order and could
    // not trigger it -- which is exactly the assumption that was wrong for the
    // NIST recoding, so the room is given rather than argued for.
    let mut k = [0u64; 5];
    for (i, limb) in k.iter_mut().take(4).enumerate() {
        let mut b = [0u8; 8];
        b.copy_from_slice(&scalar[i * 8..i * 8 + 8]);
        *limb = u64::from_le_bytes(b);
    }

    let mut i = 0;
    while k.iter().any(|&x| x != 0) {
        if k[0] & 1 == 1 {
            let mut d = (k[0] & mask) as i64;
            if d >= half {
                d -= full;
            }
            naf[i] = d as i8;
            if d > 0 {
                sub_u64(&mut k, d as u64);
            } else {
                add_u64(&mut k, d.unsigned_abs());
            }
        }
        shr1(&mut k);
        i += 1;
    }
    naf
}

/// `k -= v`, for `v` small enough not to borrow past the top.
fn sub_u64(k: &mut [u64; 5], v: u64) {
    let (d, mut borrow) = k[0].overflowing_sub(v);
    k[0] = d;
    for limb in k.iter_mut().skip(1) {
        if !borrow {
            break;
        }
        let (d, b) = limb.overflowing_sub(1);
        *limb = d;
        borrow = b;
    }
}

/// `k += v`, for `v` small enough not to carry past the top.
fn add_u64(k: &mut [u64; 5], v: u64) {
    let (d, mut carry) = k[0].overflowing_add(v);
    k[0] = d;
    for limb in k.iter_mut().skip(1) {
        if !carry {
            break;
        }
        let (d, c) = limb.overflowing_add(1);
        *limb = d;
        carry = c;
    }
}

/// `k >>= 1`.
fn shr1(k: &mut [u64; 5]) {
    for i in 0..4 {
        k[i] = (k[i] >> 1) | (k[i + 1] << 63);
    }
    k[4] >>= 1;
}

/// `SHA-512(parts...)` reduced modulo the group order.
fn hash_to_scalar(parts: &[&[u8]]) -> [u8; 32] {
    let mut h = Sha512::new();
    for p in parts {
        h.update(p);
    }
    let digest = h.finalize();
    let mut wide = [0u8; 64];
    wide.copy_from_slice(digest.as_ref());
    scalar::reduce_wide(&wide)
}

/// A signing key with its public key already derived.
///
/// # Why this exists
///
/// RFC 8032 signing needs the public key: it goes into the hash that produces
/// `k`. [`Ed25519::sign`] takes only the 32-byte seed, so it has to derive the
/// public key on every call -- a second basepoint multiplication, and with the
/// table in place that is most of what a signature now costs.
///
/// A key that is used more than once should derive it once. That is what a TLS
/// server does with a certificate key, and what dalek's `SigningKey` does,
/// which is why comparing `Ed25519::sign` against it was comparing two
/// different amounts of work.
///
/// The trait method still exists and still takes a seed. This changes nothing
/// for a caller signing once; it halves the cost for a caller signing twice.
pub struct Ed25519Key {
    /// The clamped scalar from the seed's hash.
    scalar: [u8; 32],
    /// The second half of that hash, which seeds the deterministic nonce.
    prefix: [u8; 32],
    /// `scalar * B`, compressed. Derived once, here.
    public: [u8; 32],
}

impl Drop for Ed25519Key {
    fn drop(&mut self) {
        self.scalar.zeroize();
        self.prefix.zeroize();
        // `public` is public, and is left alone.
    }
}

impl Ed25519Key {
    /// Expand a 32-byte seed and derive its public key.
    pub fn from_seed(seed: &[u8]) -> Result<Self> {
        ensure!(seed.len() == 32, InvalidLength, "ed25519 seed");
        let (scalar, prefix) = expand_seed(seed);
        let public = mul_basepoint(&scalar).compress();
        Ok(Self {
            scalar,
            prefix,
            public,
        })
    }

    /// The public key, already derived.
    pub fn public_key(&self) -> &[u8; 32] {
        &self.public
    }

    /// Sign `message`, performing one basepoint multiplication rather than two.
    pub fn sign(&self, message: &[u8], signature: &mut [u8]) -> Result<()> {
        ensure!(
            signature.len() == 64,
            InvalidLength,
            "ed25519 signature buffer"
        );

        // r = H(prefix || M), deterministic -- Ed25519 needs no RNG at signing
        // time, which removes an entire class of nonce-reuse failures.
        let mut r = hash_to_scalar(&[&self.prefix, message]);
        let big_r = mul_basepoint(&r).compress();

        let k = hash_to_scalar(&[&big_r, &self.public, message]);
        let s = scalar::mul_add(&k, &self.scalar, &r);

        signature[..32].copy_from_slice(&big_r);
        signature[32..].copy_from_slice(&s);
        r.zeroize();
        Ok(())
    }
}

impl SignatureScheme for Ed25519 {
    const PRIVATE_KEY_LEN: usize = 32;
    const PUBLIC_KEY_LEN: usize = 32;
    const SIGNATURE_LEN: usize = 64;

    fn public_key(private_key: &[u8], out: &mut [u8]) -> Result<()> {
        ensure!(private_key.len() == 32, InvalidLength, "ed25519 seed");
        ensure!(out.len() == 32, InvalidLength, "ed25519 public key buffer");
        let (mut a, mut prefix) = expand_seed(private_key);
        out.copy_from_slice(&mul_basepoint(&a).compress());
        a.zeroize();
        prefix.zeroize();
        Ok(())
    }

    fn sign(private_key: &[u8], message: &[u8], signature: &mut [u8]) -> Result<()> {
        ensure!(private_key.len() == 32, InvalidLength, "ed25519 seed");
        ensure!(
            signature.len() == 64,
            InvalidLength,
            "ed25519 signature buffer"
        );

        // One shot: expand, derive the public key, sign, discard. A caller
        // signing more than once should hold an `Ed25519Key` instead and pay
        // the derivation once.
        Ed25519Key::from_seed(private_key)?.sign(message, signature)
    }

    fn verify(public_key: &[u8], message: &[u8], signature: &[u8]) -> Result<()> {
        // One shot: recover the point, verify, discard. A caller verifying
        // more than once against the same key should hold an
        // `Ed25519VerifyKey` and pay the decompression once.
        Ed25519VerifyKey::from_bytes(public_key)?.verify(message, signature)
    }
}

/// A public key with its point already recovered.
///
/// Verification needs the public key as a curve point, and decompressing one
/// is a field exponentiation -- about two microseconds, against the twenty a
/// verification takes. A key used more than once should not pay that more than
/// once, which is the same reason [`Ed25519Key`] exists on the signing side.
///
/// The point is stored negated, because the equation verification checks is
/// `[S]B + [k](-A) == R`, so that is the form every signature wants.
///
/// [`Ed25519::verify`] builds one of these and throws it away, which is the
/// right thing for a caller with one signature and the wrong thing for a
/// caller with many.
pub struct Ed25519VerifyKey {
    /// The compressed encoding, which the challenge hash needs verbatim.
    compressed: [u8; 32],
    /// `-A`, decompressed once.
    neg_a: Point,
}

impl Ed25519VerifyKey {
    /// Decompress `public_key`, rejecting anything not on the curve.
    pub fn from_bytes(public_key: &[u8]) -> Result<Self> {
        ensure!(public_key.len() == 32, InvalidLength, "ed25519 public key");
        let mut compressed = [0u8; 32];
        compressed.copy_from_slice(public_key);
        let a = Point::decompress(&compressed).ok_or(ic_core::err!(
            MalformedEncoding,
            "ed25519 public key is not on the curve"
        ))?;
        Ok(Self {
            compressed,
            neg_a: a.negate(),
        })
    }

    /// The key as it was given.
    pub fn as_bytes(&self) -> &[u8; 32] {
        &self.compressed
    }

    /// Verify `signature` over `message`.
    pub fn verify(&self, message: &[u8], signature: &[u8]) -> Result<()> {
        ensure!(signature.len() == 64, InvalidLength, "ed25519 signature");

        let mut big_r = [0u8; 32];
        big_r.copy_from_slice(&signature[..32]);
        let mut s = [0u8; 32];
        s.copy_from_slice(&signature[32..]);

        // RFC 8032 section 5.1.7: reject a non-canonical S. Without this check
        // the signature is malleable, and any system that treats a signature
        // as a unique identifier becomes attackable.
        ensure!(
            scalar::is_canonical(&s),
            MalformedEncoding,
            "ed25519 signature S is not reduced"
        );

        let r_point = Point::decompress(&big_r).ok_or(ic_core::err!(
            MalformedEncoding,
            "ed25519 signature R is not on the curve"
        ))?;

        let k = hash_to_scalar(&[&big_r, &self.compressed, message]);

        // [S]B + [k](-A) == R, in one interleaved pass sharing a single chain
        // of doublings. Everything here is public, so neither multiplication
        // is constant time.
        #[cfg(feature = "std")]
        let lhs = double_scalar_mul_vartime(&self.neg_a, &k, &s);
        #[cfg(not(feature = "std"))]
        let lhs = mul_basepoint(&s).add(&self.neg_a.mul_scalar_vartime(&k));

        if lhs.eq_projective(&r_point) {
            Ok(())
        } else {
            Err(ic_core::err!(AuthenticationFailed, "ed25519"))
        }
    }
}

impl SelfTest for Ed25519 {
    fn self_test() -> Result<()> {
        // RFC 8032 §7.1 test vector 1: the empty message.
        let mut seed = [0u8; 32];
        ic_core::codec::hex_decode(
            b"9d61b19deffd5a60ba844af492ec2cc44449c5697b326919703bac031cae7f60",
            &mut seed,
        )?;
        let mut want_pk = [0u8; 32];
        ic_core::codec::hex_decode(
            b"d75a980182b10ab7d54bfed3c964073a0ee172f3daa62325af021a68f707511a",
            &mut want_pk,
        )?;
        let mut want_sig = [0u8; 64];
        ic_core::codec::hex_decode(
            b"e5564300c360ac729086e2cc806e828a84877f1eb8e5d974d873e065224901555fb8821590a33bacc61e39701cf9b46bd25bf5f0595bbe24655141438e7a100b",
            &mut want_sig,
        )?;

        let mut pk = [0u8; 32];
        <Self as SignatureScheme>::public_key(&seed, &mut pk)?;
        ensure!(
            ic_core::ct::verify(&want_pk, &pk),
            SelfTestFailed,
            "ed25519"
        );

        let mut sig = [0u8; 64];
        <Self as SignatureScheme>::sign(&seed, b"", &mut sig)?;
        ensure!(
            ic_core::ct::verify(&want_sig, &sig),
            SelfTestFailed,
            "ed25519"
        );

        <Self as SignatureScheme>::verify(&pk, b"", &sig)?;

        // A corrupted signature must be rejected.
        sig[0] ^= 1;
        ensure!(
            <Self as SignatureScheme>::verify(&pk, b"", &sig).is_err(),
            SelfTestFailed,
            "ed25519"
        );
        Ok(())
    }
}

#[cfg(test)]
mod tests {
    use super::*;
    use ic_core::codec::{hex, unhex};

    #[test]
    fn curve_constants_are_correct() {
        // d = -121665 / 121666
        let d = Fe::from_u64(121_665)
            .neg()
            .mul(&Fe::from_u64(121_666).invert());
        assert_eq!(hex(&D.to_bytes()), hex(&d.to_bytes()), "d");
        assert_eq!(hex(&D2.to_bytes()), hex(&d.add(&d).to_bytes()), "2d");
        // sqrt(-1) squares to -1.
        assert_eq!(
            hex(&SQRT_M1.square().to_bytes()),
            hex(&Fe::ONE.neg().to_bytes()),
            "sqrt(-1)"
        );
    }

    #[test]
    fn basepoint_has_the_expected_coordinates() {
        let b = basepoint();
        // y = 4/5
        let expected_y = Fe::from_u64(4).mul(&Fe::from_u64(5).invert());
        let z_inv = b.z.invert();
        assert_eq!(
            hex(&b.y.mul(&z_inv).to_bytes()),
            hex(&expected_y.to_bytes())
        );
        assert_eq!(hex(&b.compress()), hex(&BASEPOINT_COMPRESSED));
    }

    /// The dedicated doubling must agree with adding a point to itself.
    ///
    /// `add` is what RFC 8032's vectors validate, so it is the oracle here.
    /// The two formulas are different enough -- one reads `T`, the other does
    /// not -- that agreeing on the basepoint alone would not be convincing, so
    /// this walks a chain of multiples and doubles each one.
    #[test]
    fn doubling_agrees_with_adding_a_point_to_itself() {
        let mut p = basepoint();
        let mut checked = 0;
        for _ in 0..16 {
            assert_eq!(
                p.double().compress(),
                p.add(&p).compress(),
                "dedicated doubling and self-addition differ"
            );
            p = p.add(&basepoint());
            checked += 1;
        }
        assert_eq!(checked, 16, "the comparison did not run");

        // The identity doubles to itself, which the formula has to get right
        // without a special case.
        assert_eq!(
            Point::IDENTITY.double().compress(),
            Point::IDENTITY.compress()
        );
    }

    /// Projective equality must agree with comparing compressed encodings.
    ///
    /// The two answer the same question by different routes -- one divides by
    /// Z, the other cross-multiplies -- so agreement is the argument. It has to
    /// hold for equal points given *different* representatives, which is the
    /// case the whole optimisation rests on, so the test scales one side by a
    /// factor and checks it still compares equal.
    #[test]
    fn projective_equality_agrees_with_compressed_equality() {
        let b = basepoint();
        let mut points = std::vec![Point::IDENTITY, b];
        let mut p = b;
        for _ in 0..6 {
            p = p.double();
            points.push(p);
        }

        let mut checked = 0;
        for (i, a) in points.iter().enumerate() {
            for (j, c) in points.iter().enumerate() {
                let projective = a.eq_projective(c);
                let compressed = a.compress() == c.compress();
                assert_eq!(
                    projective, compressed,
                    "projective and compressed equality differ for {i} vs {j}"
                );
                checked += 1;
            }
        }
        assert_eq!(checked, 64, "the comparison did not run");

        // The case that matters: the same point with a different Z. Adding the
        // identity re-scales the representation without moving the point.
        let scaled = b.add(&Point::IDENTITY);
        assert!(b.eq_projective(&scaled), "equal points with different Z");
        assert_eq!(b.compress(), scaled.compress());
    }

    #[test]
    fn group_law_is_consistent() {
        let b = basepoint();
        // P + 0 == P
        assert_eq!(hex(&b.add(&Point::IDENTITY).compress()), hex(&b.compress()));
        // 2P via doubling equals 2P via scalar multiplication.
        let mut two = [0u8; 32];
        two[0] = 2;
        assert_eq!(
            hex(&b.double().compress()),
            hex(&b.mul_scalar(&two).compress())
        );
        // (P + P) + P == 3P
        let mut three = [0u8; 32];
        three[0] = 3;
        assert_eq!(
            hex(&b.double().add(&b).compress()),
            hex(&b.mul_scalar(&three).compress())
        );
    }

    #[test]
    fn order_of_the_basepoint_is_l() {
        // [L]B must be the identity.
        assert_eq!(
            hex(&basepoint().mul_scalar(&scalar::L).compress()),
            hex(&Point::IDENTITY.compress())
        );
    }

    #[test]
    fn compression_roundtrips() {
        let b = basepoint();
        for k in [1u8, 2, 3, 47, 200] {
            let mut s = [0u8; 32];
            s[0] = k;
            let p = b.mul_scalar(&s);
            let c = p.compress();
            let d = Point::decompress(&c).expect("valid point");
            assert_eq!(hex(&d.compress()), hex(&c), "k = {k}");
        }
    }

    #[test]
    fn decompression_rejects_non_curve_points() {
        // A y value with no corresponding x.
        let mut bad = [0u8; 32];
        bad[0] = 2;
        assert!(Point::decompress(&bad).is_none());
    }

    /// RFC 8032 §7.1 test vectors.
    #[test]
    fn rfc8032_vectors() {
        let cases: [(&str, &str, &str, &str); 3] = [
            (
                "9d61b19deffd5a60ba844af492ec2cc44449c5697b326919703bac031cae7f60",
                "d75a980182b10ab7d54bfed3c964073a0ee172f3daa62325af021a68f707511a",
                "",
                "e5564300c360ac729086e2cc806e828a84877f1eb8e5d974d873e065224901555fb8821590a33bacc61e39701cf9b46bd25bf5f0595bbe24655141438e7a100b",
            ),
            (
                "4ccd089b28ff96da9db6c346ec114e0f5b8a319f35aba624da8cf6ed4fb8a6fb",
                "3d4017c3e843895a92b70aa74d1b7ebc9c982ccf2ec4968cc0cd55f12af4660c",
                "72",
                "92a009a9f0d4cab8720e820b5f642540a2b27b5416503f8fb3762223ebdb69da085ac1e43e15996e458f3613d0f11d8c387b2eaeb4302aeeb00d291612bb0c00",
            ),
            (
                "c5aa8df43f9f837bedb7442f31dcb7b166d38535076f094b85ce3a2e0b4458f7",
                "fc51cd8e6218a1a38da47ed00230f0580816ed13ba3303ac5deb911548908025",
                "af82",
                "6291d657deec24024827e69c3abe01a30ce548a284743a445e3680d7db5ac3ac18ff9b538d16f290ae67f760984dc6594a7c15e9716ed28dc027beceea1ec40a",
            ),
        ];

        for (seed_hex, pk_hex, msg_hex, sig_hex) in cases {
            let seed = unhex(seed_hex).unwrap();
            let msg = unhex(msg_hex).unwrap();

            let mut pk = [0u8; 32];
            Ed25519::public_key(&seed, &mut pk).unwrap();
            assert_eq!(hex(&pk), pk_hex, "public key for {seed_hex}");

            let mut sig = [0u8; 64];
            Ed25519::sign(&seed, &msg, &mut sig).unwrap();
            assert_eq!(hex(&sig), sig_hex, "signature for {seed_hex}");

            Ed25519::verify(&pk, &msg, &sig).unwrap();
        }
    }

    #[test]
    fn verification_rejects_tampering() {
        let seed = [0x42u8; 32];
        let mut pk = [0u8; 32];
        Ed25519::public_key(&seed, &mut pk).unwrap();
        let mut sig = [0u8; 64];
        Ed25519::sign(&seed, b"authentic", &mut sig).unwrap();
        Ed25519::verify(&pk, b"authentic", &sig).unwrap();

        // Wrong message.
        assert!(Ed25519::verify(&pk, b"forged", &sig).is_err());
        // Corrupted R.
        let mut bad = sig;
        bad[0] ^= 1;
        assert!(Ed25519::verify(&pk, b"authentic", &bad).is_err());
        // Corrupted S.
        let mut bad = sig;
        bad[40] ^= 1;
        assert!(Ed25519::verify(&pk, b"authentic", &bad).is_err());
        // Wrong public key.
        let mut other_pk = [0u8; 32];
        Ed25519::public_key(&[0x43u8; 32], &mut other_pk).unwrap();
        assert!(Ed25519::verify(&other_pk, b"authentic", &sig).is_err());
    }

    /// A signature with `S >= L` must be rejected even though it would
    /// otherwise verify; this is the malleability check.
    #[test]
    fn rejects_non_canonical_s() {
        let seed = [0x42u8; 32];
        let mut pk = [0u8; 32];
        Ed25519::public_key(&seed, &mut pk).unwrap();
        let mut sig = [0u8; 64];
        Ed25519::sign(&seed, b"msg", &mut sig).unwrap();

        // Add L to S. The verification equation still holds mod L, so only the
        // canonicality check can catch it.
        let mut carry = 0u16;
        for i in 0..32 {
            let t = sig[32 + i] as u16 + scalar::L[i] as u16 + carry;
            sig[32 + i] = t as u8;
            carry = t >> 8;
        }
        assert!(Ed25519::verify(&pk, b"msg", &sig).is_err());
    }

    /// The cached key and the seed-only call must produce the same signature.
    ///
    /// They share a code path now, which is the point -- but that is the sort
    /// of thing a later refactor separates again, and the two would then differ
    /// only for callers who use one and verify with the other. RFC 8032's
    /// vectors exercise the trait method alone and would not notice.
    #[test]
    fn the_cached_key_signs_identically_to_the_seed() {
        let mut checked = 0;
        for seed in [[0x11u8; 32], [0x9du8; 32], [0xffu8; 32]] {
            for message in [&b""[..], &b"x"[..], &b"a longer message to sign"[..]] {
                let mut from_seed = [0u8; 64];
                Ed25519::sign(&seed, message, &mut from_seed).unwrap();

                let key = Ed25519Key::from_seed(&seed).unwrap();
                let mut from_key = [0u8; 64];
                key.sign(message, &mut from_key).unwrap();

                assert_eq!(from_seed, from_key, "the two signing paths diverged");

                // And the cached public key is the one the trait derives.
                let mut derived = [0u8; 32];
                Ed25519::public_key(&seed, &mut derived).unwrap();
                assert_eq!(&derived, key.public_key());

                // Both verify, so neither is consistently wrong.
                Ed25519::verify(&derived, message, &from_key).unwrap();
                checked += 1;
            }
        }
        assert_eq!(checked, 9, "the comparison did not run");
    }

    /// The variable-time path must agree with the constant-time one.
    ///
    /// RFC 8032's vectors reach it with a handful of scalars, which says little
    /// about a recoding whose digit pattern is different for every scalar. This
    /// drives both over scalars picked to stress the recoding: zero, one, a
    /// value that carries at every position, alternating bits, and the top of
    /// the range.
    #[test]
    fn the_vartime_multiplication_agrees_with_the_ladder() {
        let p = basepoint();

        let mut one = [0u8; 32];
        one[0] = 1;
        let mut two = [0u8; 32];
        two[0] = 2;
        let mut top = [0xffu8; 32];
        top[31] = 0x7f;

        let mut checked = 0;
        for scalar in [
            [0u8; 32],
            one,
            two,
            [0xffu8; 32],
            [0x55u8; 32],
            [0xaau8; 32],
            top,
            [0x9du8; 32],
        ] {
            let fast = p.mul_scalar_vartime(&scalar);
            let slow = p.mul_scalar(&scalar);
            assert_eq!(
                fast.compress(),
                slow.compress(),
                "vartime and ladder differ for {scalar:02x?}"
            );
            checked += 1;
        }
        assert_eq!(checked, 8, "the comparison did not run");
    }

    /// The recoding must represent the scalar, with the digits it promises.
    #[test]
    fn the_wnaf_digits_are_odd_sparse_and_faithful() {
        for scalar in [[1u8; 32], [0x9du8; 32], [0xffu8; 32], [0x55u8; 32]] {
            let naf = wnaf5(&scalar);

            let mut previous_nonzero: Option<usize> = None;
            for (i, d) in naf.iter().enumerate() {
                if *d == 0 {
                    continue;
                }
                assert!(d % 2 != 0, "digit {d} at {i} is not odd");
                assert!((-15..=15).contains(d), "digit {d} at {i} is out of range");
                if let Some(j) = previous_nonzero {
                    assert!(i - j >= 5, "digits at {j} and {i} are adjacent");
                }
                previous_nonzero = Some(i);
            }

            // And it evaluates back to the scalar, modulo a small prime that
            // has nothing to do with the curve.
            const M: u128 = 1_000_000_007;
            let mut from_digits = 0u128;
            let mut power = 1u128;
            for d in naf {
                let term = ((d as i128).rem_euclid(M as i128)) as u128;
                from_digits = (from_digits + term * power) % M;
                power = power * 2 % M;
            }
            let mut from_bytes = 0u128;
            let mut p = 1u128;
            for byte in scalar {
                from_bytes = (from_bytes + (byte as u128) * p) % M;
                p = p * 256 % M;
            }
            assert_eq!(from_digits, from_bytes, "recoding changed the value");
        }
    }

    #[test]
    fn signing_is_deterministic() {
        let seed = [0x7fu8; 32];
        let mut a = [0u8; 64];
        let mut b = [0u8; 64];
        Ed25519::sign(&seed, b"same input", &mut a).unwrap();
        Ed25519::sign(&seed, b"same input", &mut b).unwrap();
        assert_eq!(a, b);
    }

    #[test]
    fn rejects_wrong_lengths() {
        let mut out = [0u8; 32];
        assert!(Ed25519::public_key(&[0u8; 31], &mut out).is_err());
        assert!(Ed25519::sign(&[0u8; 32], b"", &mut [0u8; 63]).is_err());
        assert!(Ed25519::verify(&[0u8; 32], b"", &[0u8; 63]).is_err());
    }

    #[test]
    fn self_test_passes() {
        Ed25519::self_test().unwrap();
    }

    /// A few points on the curve, for the formula tests below.
    fn sample_points(n: usize) -> Vec<Point> {
        let mut out = Vec::new();
        let mut p = basepoint();
        for _ in 0..n {
            out.push(p);
            p = p.double().add(&basepoint());
        }
        out
    }

    /// The completed-coordinate doubling is the extended one.
    ///
    /// `Projective::double` produces four squarings and no multiplications,
    /// and the multiplications a doubling needs move into whichever conversion
    /// follows. That is only sound if the two routes agree, and the signs are
    /// where it would go wrong: the completed form this uses differs from the
    /// one the extended formula implies by a factor of -1 in two coordinates,
    /// which cancels projectively and would not cancel if one of them were
    /// dropped.
    #[test]
    fn the_completed_doubling_agrees_with_the_extended_one() {
        for p in sample_points(40) {
            let want = p.double();
            let got = p.to_projective().double().to_extended();
            assert!(got.eq_projective(&want), "doubling disagrees");
            // And through the projective form, which is the route a chain of
            // doublings actually takes.
            let chained = p.to_projective().double().to_projective().double();
            let twice = p.double().double();
            assert!(chained.to_extended().eq_projective(&twice), "two doublings");
        }
    }

    /// Niels addition is the nine-multiplication addition.
    #[test]
    fn niels_addition_agrees_with_the_general_one() {
        let pts = sample_points(20);
        for p in &pts {
            for q in &pts {
                let want = p.add(q);
                let got = p.add_niels(&q.to_niels()).to_extended();
                assert!(got.eq_projective(&want), "add_niels disagrees");

                let want_sub = p.add(&q.negate());
                let got_sub = p.sub_niels(&q.to_niels()).to_extended();
                assert!(got_sub.eq_projective(&want_sub), "sub_niels disagrees");
            }
        }
    }

    /// Affine-Niels addition is the general addition.
    ///
    /// It drops the `Z` multiply on the assumption that the stored point has
    /// `Z = 1`, which `to_affine_niels` arranges by inverting. If that
    /// inversion or the `2d·x·y` were wrong the result would still be a point
    /// on the curve, just the wrong one, so it is checked against the addition
    /// the published vectors validate.
    #[test]
    fn affine_niels_addition_agrees_with_the_general_one() {
        let pts = sample_points(20);
        for p in &pts {
            for q in &pts {
                let want = p.add(q);
                let got = p.add_affine_niels(&q.to_affine_niels()).to_extended();
                assert!(got.eq_projective(&want), "add_affine_niels disagrees");

                // And the negated form, which the table's sign handling uses.
                let mut n = q.to_affine_niels();
                n.conditional_negate(ic_core::ct::Choice::from_u8(1));
                let want_neg = p.add(&q.negate());
                let got_neg = p.add_affine_niels(&n).to_extended();
                assert!(got_neg.eq_projective(&want_neg), "negated form disagrees");
            }
        }
    }

    /// Where verification's time actually goes.
    ///
    /// Ignored: it is a measurement, not an assertion. Run it with
    /// `cargo test -p ic-ec --release -- --ignored --nocapture where_verify_spends`
    /// before changing anything here, because the answer decided what was
    /// worth doing and a guess would not have.
    #[test]
    #[ignore = "diagnostic, not a test"]
    fn where_verify_spends_its_time() {
        use std::time::Instant;

        let seed = [7u8; 32];
        let key = Ed25519Key::from_seed(&seed).unwrap();
        let msg = b"benchmark message";
        let mut sig = [0u8; 64];
        key.sign(msg, &mut sig).unwrap();
        let pk = *key.public_key();

        let mut big_r = [0u8; 32];
        big_r.copy_from_slice(&sig[..32]);
        let mut s_sc = [0u8; 32];
        s_sc.copy_from_slice(&sig[32..]);

        let n = 2000;
        let time = |label: &str, f: &mut dyn FnMut()| {
            let mut best = f64::INFINITY;
            for _ in 0..5 {
                let t = Instant::now();
                for _ in 0..n {
                    f();
                }
                let e = t.elapsed().as_secs_f64() / n as f64 * 1e6;
                if e < best {
                    best = e;
                }
            }
            println!("  {label:<34} {best:>9.2} us");
            best
        };

        let a_point = Point::decompress(&pk).unwrap();
        let k = hash_to_scalar(&[&big_r, &pk, msg]);

        println!(
            "
ed25519 verify, cost breakdown:"
        );
        let d = time("decompress (x2 per verify)", &mut || {
            core::hint::black_box(Point::decompress(&pk));
        });
        let h = time("hash_to_scalar", &mut || {
            core::hint::black_box(hash_to_scalar(&[&big_r, &pk, msg]));
        });
        let b = time("mul_basepoint (const time)", &mut || {
            core::hint::black_box(mul_basepoint(&s_sc));
        });
        let v = time("double_scalar_mul_vartime", &mut || {
            core::hint::black_box(double_scalar_mul_vartime(&a_point.negate(), &k, &s_sc));
        });
        time("  of which: wnaf(k,5)+wnaf(s,8)", &mut || {
            core::hint::black_box(wnaf(&k, 5));
            core::hint::black_box(wnaf(&s_sc, 8));
        });
        time("  of which: odd_a table build", &mut || {
            let twice = a_point.double();
            let mut odd = [a_point; 8];
            for i in 1..8 {
                odd[i] = odd[i - 1].add(&twice);
            }
            let t: [Niels; 8] = core::array::from_fn(|i| odd[i].to_niels());
            core::hint::black_box(t);
        });
        time("  of which: 255 doublings", &mut || {
            let mut p = a_point;
            for _ in 0..255 {
                p = p.double();
            }
            core::hint::black_box(p);
        });
        time("  of which: 79 additions", &mut || {
            let mut p = a_point;
            for _ in 0..79 {
                p = p.add(&a_point);
            }
            core::hint::black_box(p);
        });
        time("compress (one inversion)", &mut || {
            core::hint::black_box(a_point.compress());
        });
        println!(
            "  {:<34} {:>9.2} us",
            "-- accounted for",
            2.0 * d + h + b + v
        );

        // One level down: if the point ops are slow, the field ops are why.
        println!(
            "
field and point primitives, nanoseconds:"
        );
        let nn = 200_000;
        let ns = |label: &str, f: &mut dyn FnMut()| {
            let mut best = f64::INFINITY;
            for _ in 0..5 {
                let t = Instant::now();
                for _ in 0..nn {
                    f();
                }
                let e = t.elapsed().as_secs_f64() / nn as f64 * 1e9;
                if e < best {
                    best = e;
                }
            }
            println!("  {label:<34} {best:>9.2} ns");
        };
        let fx = a_point.x;
        let fy = a_point.y;
        ns("Fe::mul", &mut || {
            core::hint::black_box(core::hint::black_box(&fx).mul(core::hint::black_box(&fy)));
        });
        ns("Fe::square", &mut || {
            core::hint::black_box(core::hint::black_box(&fx).square());
        });
        ns("Fe::add", &mut || {
            core::hint::black_box(core::hint::black_box(&fx).add(core::hint::black_box(&fy)));
        });
        ns("Fe::sub", &mut || {
            core::hint::black_box(core::hint::black_box(&fx).sub(core::hint::black_box(&fy)));
        });
        ns("Fe::neg", &mut || {
            core::hint::black_box(core::hint::black_box(&fx).neg());
        });
        let proj = a_point.to_projective();
        let comp = proj.double();
        let an = a_point.to_affine_niels();
        ns("Projective::double  (4S)", &mut || {
            core::hint::black_box(core::hint::black_box(&proj).double());
        });
        ns("Projective::double_projective", &mut || {
            core::hint::black_box(core::hint::black_box(proj).double_projective());
        });
        ns("Completed::to_projective (3M)", &mut || {
            core::hint::black_box(core::hint::black_box(&comp).to_projective());
        });
        ns("Completed::to_extended (4M)", &mut || {
            core::hint::black_box(core::hint::black_box(&comp).to_extended());
        });
        ns("Point::add_affine_niels (3M)", &mut || {
            core::hint::black_box(
                core::hint::black_box(&a_point).add_affine_niels(core::hint::black_box(&an)),
            );
        });
        ns("Point::double", &mut || {
            core::hint::black_box(core::hint::black_box(&a_point).double());
        });
        ns("Point::add", &mut || {
            core::hint::black_box(
                core::hint::black_box(&a_point).add(core::hint::black_box(&a_point)),
            );
        });
    }

    /// How many point operations a verification actually performs.
    #[test]
    #[ignore = "diagnostic, not a test"]
    fn count_the_point_operations() {
        let mut doublings = 0usize;
        let mut adds_a = 0usize;
        let mut adds_b = 0usize;
        let mut state = 0x1234_5678_9abc_def0u64;
        let trials = 200;
        for _ in 0..trials {
            let mut kb = [0u8; 32];
            for c in kb.chunks_exact_mut(8) {
                state ^= state >> 12;
                state ^= state << 25;
                state ^= state >> 27;
                c.copy_from_slice(&state.wrapping_mul(0x2545_f491_4f6c_dd1d).to_le_bytes());
            }
            kb[31] &= 0x0f;
            let na = wnaf(&kb, 5);
            let nb = wnaf(&kb, 8);
            let mut i = 257;
            while i > 0 && na[i] == 0 && nb[i] == 0 {
                i -= 1;
            }
            doublings += i + 1;
            adds_a += na.iter().filter(|d| **d != 0).count();
            adds_b += nb.iter().filter(|d| **d != 0).count();
        }
        let d = doublings as f64 / trials as f64;
        let aa = adds_a as f64 / trials as f64;
        let ab = adds_b as f64 / trials as f64;
        println!(
            "
  per double-scalar multiplication, averaged over {trials} scalars:"
        );
        println!("    doublings                  {d:>8.1}");
        println!("    additions, w=5 table (A)   {aa:>8.1}");
        println!("    additions, w=8 table (B)   {ab:>8.1}");
        println!("    additions, building A      {:>8.1}", 8.0);
        println!("    ---");
        println!("    total additions            {:>8.1}", aa + ab + 8.0);
        println!(
            "    field muls, at 4M+4S per doubling and 9M per addition: {:>6.0}",
            d * 8.0 + (aa + ab + 8.0) * 9.0
        );
        println!(
            "    the same at dalek's 3M+4S and 7M:                      {:>6.0}",
            d * 7.0 + (aa + ab + 8.0) * 7.0
        );
    }
}