high-roller 0.2.0

use arraydeque::ArrayDeque;

/// A rolling accumulator that tracks the largest value
/// in a fixed size window.
///
/// - Push is O(1)
/// - Get max is O(1)
/// - There are no heap allocations.
///
/// Like [`std::collections::BinaryHeap`], `RollingMax` exposes
/// a "maximum only" API. The minimum can be found by using
/// [`core::cmp::Reverse`].
///
/// ```
/// use core::cmp::Reverse;
/// use high_roller::rolling_max::RollingMax;
///
/// type RollingMin<T, const WINDOW: usize> = RollingMax<Reverse<T>, WINDOW>;
/// ```
///
/// The example below shows how this might be used to publish
/// telemetry for the highest latency event among the most
/// recent 100 samples.
///
/// ```
/// use high_roller::rolling_max::RollingMax;
/// use rand::Rng;
///
/// // Assume this is unbounded in reality.
/// let events = (0..1000).map(|_| network_latency_us());
///
/// let mut window: RollingMax<u32, 100> = RollingMax::new();
/// for latency in events {
///     window.push(latency);
///     window.max().copied().map(emit_network_telemetry);
/// }
///
/// fn network_latency_us() -> u32 {
///     rand::rng().next_u32()
/// }
///
/// fn emit_network_telemetry(max_latency_us: u32) {
///     core::hint::black_box(max_latency_us);
/// }
///
/// ```
///
/// # Design
///
/// The algorithm for this is well-known but not formalized
/// anywhere I found easily accessible. The constraint of
/// accumulating values internally is also a slight divergence
/// from how this problem is typically presented. While RollingMax
/// was motivated by a genuine need in production code, I also
/// verified it against LeetCode 239, which exercises the same
/// use case.
#[derive(Debug, Default)]
pub struct RollingMax<T, const WINDOW: usize> {
    deq: ArrayDeque<T, WINDOW>,
    ct: usize,
    // PERF: Expiration could wrap to the window size. In that
    // case rarely if ever will an expiration exceed u16::MAX.
    // This incentivizes compressing expirations into a smaller
    // type than usize. Worth investigating.
    expires: ArrayDeque<usize, WINDOW>,
}

impl<T, const W: usize> RollingMax<T, W>
where
    T: PartialOrd,
{
    /// Constructs a new empty [`RollingMax`].
    ///
    /// This type is stored entirely on the stack, so be aware of
    /// window size. Boxing might be a good idea. Doing so yourself
    /// enables cache-friendlier patterns than if each RollingMax
    /// were unconditionally allocated on the heap.
    ///
    /// ```
    /// use core::cmp::Reverse;
    /// use high_roller::rolling_max::RollingMax;
    ///
    /// const WINDOW: usize = 6000;
    ///
    /// #[derive(Default)]
    /// struct MyTelemetry {
    ///     max_latency: RollingMax<u32, WINDOW>,
    ///     min_latency: RollingMax<Reverse<u32>, WINDOW>,
    ///     largest_batch: RollingMax<usize, WINDOW>
    /// }
    ///
    /// // `MyTelemetry` is too big to live on the stack. But keeping
    /// // everything in one allocation may yield friendlier cache
    /// // access patterns.
    /// let _telemetry = Box::new(MyTelemetry::default());
    ///
    /// ```
    #[must_use]
    pub const fn new() -> Self {
        Self {
            deq: ArrayDeque::new(),
            expires: ArrayDeque::new(),
            ct: 0,
        }
    }

    // TODO: docs
    //
    // Clippy allow:
    //
    // Expect is used in this function to guarantee invariants.
    // See the note within the function.
    //
    // It should never panic in user code. So exposing or documenting
    // the failure case makes the API unnecessarily leaky.
    #[allow(clippy::expect_used)]
    #[allow(clippy::missing_panics_doc)]
    pub fn push(&mut self, entry: T) {
        self.ct = self.ct.wrapping_add(1);

        while self
            .expires
            .front()
            .is_some_and(|&exp| self.ct.wrapping_sub(exp) <= W)
        {
            self.deq.pop_front();
            self.expires.pop_front();
        }

        while self.deq.back().is_some_and(|tail| tail <= &entry) {
            self.deq.pop_back();
            self.expires.pop_back();
        }

        // The first loop pops any entry whose expiration equals
        // or exceeds W. So every entry in the queue has a nonzero
        // expiration less than W. The queue has capacity W. So the
        // queue is guaranteed to have at least one spot available.
        // The calls to `expect` below check this invariant.
        self.deq
            .push_back(entry)
            .expect("expirations guarantee queue is never full at this point");
        self.expires
            .push_back(self.ct.wrapping_add(W))
            .expect("expirations guarantee queue is never full at this point");
    }

    // TODO: docs
    #[must_use]
    pub fn max(&self) -> Option<&T> {
        self.deq.front()
    }
}

#[cfg(test)]
pub mod for_tests {
    use arraydeque::{ArrayDeque, Wrapping};

    /// The simple and easy implementation of RollingMax.
    /// Useful for verifying correctness and performance
    /// characteristics. This crate's `RollingMax` is totally
    /// useless if this meets your needs.
    #[derive(Default)]
    pub struct NaiveRollingMax<T, const W: usize> {
        deq: ArrayDeque<T, W, Wrapping>,
    }

    impl<T, const W: usize> NaiveRollingMax<T, W>
    where
        T: Ord,
    {
        #[must_use]
        pub const fn new() -> Self {
            Self {
                deq: ArrayDeque::new(),
            }
        }

        pub fn push(&mut self, entry: T) {
            self.deq.push_back(entry);
        }

        pub fn max(&self) -> Option<&T> {
            self.deq.iter().max()
        }
    }
}

#[cfg(test)]
#[allow(clippy::unwrap_used)]
mod tests {
    use super::*;
    use crate::{decimal::D4, rolling_max::for_tests::NaiveRollingMax};

    use core::fmt::Debug;
    use rand::{distr::Uniform, rngs::SmallRng, RngExt, SeedableRng};

    /// Smoke test for RollingMax correctness.
    ///
    /// Accumulates a representative RollingMax and NaiveRollingMax
    /// to verify their outputs are identical.
    #[test]
    fn rng_with_naive() {
        const QLEN: usize = 1000;
        const STREAM_LEN: usize = 100_000;

        let sample =
            SmallRng::seed_from_u64(75).sample_iter(Uniform::new(-65.535, 65.535).unwrap());
        let mut roller = RollingMax::<D4, QLEN>::new();
        let mut naive = NaiveRollingMax::<D4, QLEN>::new();

        for val in sample.take(STREAM_LEN) {
            let d4 = D4::cast(val);
            roller.push(d4);
            naive.push(d4);
            assert_eq!(roller.max(), naive.max());
        }
    }

    /// Verifies the zero-state guarantee: max must be None before any push.
    #[test]
    fn max_on_empty_is_none() {
        let rm: RollingMax<i32, 3> = RollingMax::new();
        assert_eq!(rm.max(), None);
    }

    /// A single push must always yield Some, regardless of window size.
    #[test]
    fn single_push_yields_some() {
        let mut rm: RollingMax<i32, 5> = RollingMax::new();
        rm.push(42);
        assert_eq!(rm.max(), Some(&42));
    }

    /// Window=1: every element is its own maximum; exercises the path where
    /// the entire deque is evicted on every push.
    #[test]
    fn window_of_one() {
        expect_max::<i32, 1>([3, 1, 4, 1, 5].into_iter().zip([3, 1, 4, 1, 5]));
    }

    /// Window larger than the entire input: tracker never evicts, so the
    /// running max is monotonically non-decreasing.
    #[test]
    fn window_larger_than_input() {
        expect_max::<i32, 10>([2, 4, 1].into_iter().zip([2, 4, 4]));
    }

    /// Window exactly equal to input length: global max emerges only after
    /// the last push.
    #[test]
    fn window_equals_input_length() {
        expect_max::<i32, 5>([1, 3, 2, 5, 4].into_iter().zip([1, 3, 3, 5, 5]));
    }

    /// Core sliding-window case; this exact sequence caught the off-by-one
    /// expiry bug where element `3` incorrectly survived into window [1,2,0].
    #[test]
    fn sliding_window_canonical() {
        expect_max::<i32, 3>([1, 3, 1, 2, 0, 5].into_iter().zip([1, 3, 3, 3, 2, 5]));
    }

    /// Strictly increasing input: the monotone invariant discards every
    /// predecessor, so the deque always holds exactly one element.
    #[test]
    fn strictly_increasing() {
        expect_max::<i32, 3>([1, 2, 3, 4, 5].into_iter().zip([1, 2, 3, 4, 5]));
    }

    /// Strictly decreasing input: the oldest value leads the deque and must
    /// survive until it expires, then yield to the next oldest.
    #[test]
    fn strictly_decreasing() {
        expect_max::<i32, 3>([5, 4, 3, 2, 1].into_iter().zip([5, 5, 5, 4, 3]));
    }

    /// All-equal input: equal elements are pruned from the back (`<=`), so
    /// the deque stays bounded and does not grow without limit.
    #[test]
    fn all_equal() {
        expect_max::<i32, 3>([7i32; 6].into_iter().zip([7; 6]));
    }

    /// Negative values: ensures no implicit assumption about sign or zero.
    #[test]
    fn negative_values() {
        expect_max::<i32, 2>([-3, -1, -4, -1, -5].into_iter().zip([-3, -1, -1, -1, -1]));
    }

    /// Float input: exercises the PartialOrd bound on a non-Ord type.
    #[test]
    fn float_values() {
        expect_max::<f32, 2>(
            [1.0, 3.0, 2.0, 5.0, 4.0]
                .into_iter()
                .zip([1.0, 3.0, 3.0, 5.0, 5.0]),
        );
    }

    /// The maximum must survive exactly `cap` pushes and be gone on the next;
    /// guards against off-by-one errors at the expiry boundary.
    #[test]
    fn max_expires_at_exact_boundary() {
        let mut rm = RollingMax::<i32, 3>::new();
        rm.push(99);
        rm.push(1);
        rm.push(1);
        assert_eq!(rm.max(), Some(&99)); // 99 still in [99, 1, 1]
        rm.push(1);
        assert_eq!(rm.max(), Some(&1)); // 99 evicted; window is now [1, 1, 1]
    }

    /// Exercises the `usize` counter wrap-around: pre-seeds `ct` so that
    /// expiry values cross the `usize::MAX → 0` boundary, verifying that the
    /// wrapping arithmetic correctly evicts and retains elements.
    #[test]
    fn expiry_counter_wrapping() {
        let mut rm: RollingMax<i32, 3> = RollingMax {
            deq: ArrayDeque::new(),
            expires: ArrayDeque::new(),
            ct: usize::MAX - 3,
        };

        rm.push(10); // ct = usize::MAX-2, exp = 0  (wraps)
        rm.push(5); // ct = usize::MAX-1, exp = 1  (wraps)
        rm.push(8); // ct = usize::MAX,   exp = 2  (wraps)
        assert_eq!(rm.max(), Some(&10)); // window = [10, 5, 8]

        rm.push(6); // ct = 0 (wrap). exp=0 matches ct → evicts 10. window=[5,8,6]
        assert_eq!(rm.max(), Some(&8));

        rm.push(7); // ct = 1. No expiry yet. Monotone pops 6. window=[8,6,7]
        assert_eq!(rm.max(), Some(&8));

        rm.push(9); // ct = 2. exp=2 matches ct → evicts 8. Monotone pops 7. window=[6,7,9]
        assert_eq!(rm.max(), Some(&9));
    }

    /// Feeds inputs from an `(input, expected)` iterator into
    /// a RollingMax. Compares each max to `expected` and panics
    /// if they're not equal.
    #[allow(clippy::unwrap_used)]
    fn expect_max<T, const WINDOW: usize>(input_and_expected: impl Iterator<Item = (T, T)>)
    where
        T: PartialOrd + Copy + Debug + PartialEq,
    {
        let mut rm: RollingMax<T, WINDOW> = RollingMax::new();
        for (input, expected) in input_and_expected {
            rm.push(input);
            assert_eq!(*rm.max().unwrap(), expected);
        }
    }
}