在这里感谢李同学在编写gx_enum时提供的帮助
//---------------TransportLayer Section-------------------------------
GX_INT_PAYLOAD_SIZE =( 2000 | GX_FEATURE_TYPE::GX_FEATURE_INT as u32| GX_FEATURE_LEVEL::GX_FEATURE_LEVEL_REMOTE_DEV as u32)as isize, //< Provides the number of bytes transferred for each image or chunk on the stream channel.
GX_BOOL_GEV_CURRENT_IPCONFIGURATION_LLA =( 2001 | GX_FEATURE_TYPE::GX_FEATURE_BOOL as u32| GX_FEATURE_LEVEL::GX_FEATURE_LEVEL_REMOTE_DEV as u32)as isize, //< Controls whether the Link Local Address IP configuration scheme is activated on the given logical link.
GX_BOOL_GEV_CURRENT_IPCONFIGURATION_DHCP =( 2002 | GX_FEATURE_TYPE::GX_FEATURE_BOOL as u32| GX_FEATURE_LEVEL::GX_FEATURE_LEVEL_REMOTE_DEV as u32)as isize, //< Controls whether the DHCP IP configuration scheme is activated on the given logical link.
GX_BOOL_GEV_CURRENT_IPCONFIGURATION_PERSISTENTIP =( 2003 | GX_FEATURE_TYPE::GX_FEATURE_BOOL as u32| GX_FEATURE_LEVEL::GX_FEATURE_LEVEL_REMOTE_DEV as u32)as isize, //< Controls whether the PersistentIP configuration scheme is activated on the given logical link.
GX_INT_ESTIMATED_BANDWIDTH =( 2004 | GX_FEATURE_TYPE::GX_FEATURE_INT as u32| GX_FEATURE_LEVEL::GX_FEATURE_LEVEL_REMOTE_DEV as u32)as isize, //< EstimatedBandwidth, Unit: Bps(Bytes per second)
GX_INT_GEV_PACKETDELAY =( 2007 | GX_FEATURE_TYPE::GX_FEATURE_INT as u32| GX_FEATURE_LEVEL::GX_FEATURE_LEVEL_REMOTE_DEV as u32)as isize, //< Controls the delay (in timestamp counter unit) to insert between each packet for this stream channel.
GX_INT_GEV_LINK_SPEED =( 2008 | GX_FEATURE_TYPE::GX_FEATURE_INT as u32| GX_FEATURE_LEVEL::GX_FEATURE_LEVEL_REMOTE_DEV as u32)as isize, //< It indicates the connection speed in Mbps for the selected network interface.
上面是需要的格式类型，有2个要点
1. 把后面的///< 改成//<
2. 两个as u32 ，一个大括号包括全部，然后最外面是as isize
3. 给中间的那个加上前缀GX_FEATURE_TYPE::或者GX_FEATURE_LEVEL::
现在需要处理的在下面
大概是这样的，等有时间我们来一起来调吧
// DigitalIO 4000
// AnalogControl 5000
// CounterAndTimer 6000
// UserSetControl 7000
// Event 8000
// LUT 9000
// ChunkData 10000
// Color Transformation 11000
// CounterAndTimerControl 12000
// RemoveParameterLimitControl 13000
// HDRControl 14000
// MultiGrayControl 15000
// ImageQualityControl 16000
// GyroControl 17000
// FrameBufferControl 18000
// SerialPortControl 19000
// EnoderControl 22000
//----------------AnalogControls Section----------------------------
GX_ENUM_GAIN_AUTO = 5000 | GX_FEATURE_ENUM | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Sets the automatic gain control (AGC) mode.
GX_ENUM_GAIN_SELECTOR = 5001 | GX_FEATURE_ENUM | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Selects which Gain is controlled by the various Gain features.
GX_ENUM_BLACKLEVEL_AUTO = 5003 | GX_FEATURE_ENUM | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Controls the mode for automatic black level adjustment.
GX_ENUM_BLACKLEVEL_SELECTOR = 5004 | GX_FEATURE_ENUM | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Selects which Black Level is controlled by the various Black Level features.
GX_FLOAT_BALANCE_RATIO = 5008 | GX_FEATURE_FLOAT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Controls ratio of the selected color component to a reference color component.
GX_ENUM_COLOR_CORRECT = 5009 | GX_FEATURE_ENUM | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Color correction, see also GX_COLOR_CORRECT_ENTRY
GX_ENUM_DEAD_PIXEL_CORRECT = 5010 | GX_FEATURE_ENUM | GX_FEATURE_LEVEL_REMOTE_DEV, ///< The dead pixel correct function can eliminate dead pixels in the image, see also GX_DEAD_PIXEL_CORRECT_ENTRY
GX_FLOAT_GAIN = 5011 | GX_FEATURE_FLOAT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< The value is an float value that sets the selected gain control in units specific to the camera.
GX_FLOAT_BLACKLEVEL = 5012 | GX_FEATURE_FLOAT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Controls the analog black level as an absolute physical value.
GX_BOOL_GAMMA_ENABLE = 5013 | GX_FEATURE_BOOL | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Enable bit of Gamma
GX_ENUM_GAMMA_MODE = 5014 | GX_FEATURE_ENUM | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Gamma select, see also GX_GAMMA_MODE_ENTRY
GX_FLOAT_GAMMA = 5015 | GX_FEATURE_FLOAT| GX_FEATURE_LEVEL_REMOTE_DEV, ///< Gamma
GX_INT_DIGITAL_SHIFT = 5016 | GX_FEATURE_INT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< bit select
GX_ENUM_LIGHT_SOURCE_PRESET = 5017 | GX_FEATURE_ENUM | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Ambient Light Presets, refer to GX_LIGHT_SOURCE_PRESET_ENTRY
GX_BOOL_BLACKLEVEL_CALIB_STATUS = 5018 | GX_FEATURE_BOOL | GX_FEATURE_LEVEL_REMOTE_DEV, ///< BlackLevelCalibStatus
GX_INT_BLACKLEVEL_CALIB_VALUE = 5019 | GX_FEATURE_INT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< BlackLevelCalibValue
//---------------CustomFeature Section-------------------------
GX_INT_ADC_LEVEL = 6000 | GX_FEATURE_INT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< When the pixel size is not 8bits, this function can be used to choose 8bits form 10bits or 12bit for show image.
GX_INT_H_BLANKING = 6001 | GX_FEATURE_INT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Horizontal blanking
GX_INT_V_BLANKING = 6002 | GX_FEATURE_INT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Vertical blanking
GX_STRING_USER_PASSWORD = 6003 | GX_FEATURE_STRING | GX_FEATURE_LEVEL_REMOTE_DEV, ///< user password
GX_STRING_VERIFY_PASSWORD = 6004 | GX_FEATURE_STRING | GX_FEATURE_LEVEL_REMOTE_DEV, ///< verify password
GX_BUFFER_USER_DATA = 6005 | GX_FEATURE_BUFFER | GX_FEATURE_LEVEL_REMOTE_DEV, ///< user data
GX_INT_GRAY_VALUE = 6006 | GX_FEATURE_INT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< ExpectedGrayValue_InqIsImplemented
GX_INT_AAROI_OFFSETY = 6009 | GX_FEATURE_INT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< This value sets the Y offset (top offset) for the rect of interest for 2A, i.e., the distance in pixels between the top of the image area and the top of the AAROI.
GX_INT_AAROI_WIDTH = 6010 | GX_FEATURE_INT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< This value sets the width of the rect of interest in pixels for 2A.
GX_INT_AAROI_HEIGHT = 6011 | GX_FEATURE_INT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< This value sets the height of the rect of interest in pixels for 2A.
GX_FLOAT_AUTO_GAIN_MIN = 6012 | GX_FEATURE_FLOAT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Setting up automatic gain range of minimum. When the gain is set to auto mode, this function works.
GX_FLOAT_AUTO_GAIN_MAX = 6013 | GX_FEATURE_FLOAT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Setting up automatic gain range of maximum. When the gain is set to auto mode, this function works.
GX_FLOAT_AUTO_EXPOSURE_TIME_MIN = 6014 | GX_FEATURE_FLOAT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Setting up automatic shutter range of minimum. When the shutter is set to auto mode, this function works.
GX_FLOAT_AUTO_EXPOSURE_TIME_MAX = 6015 | GX_FEATURE_FLOAT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Setting up automatic shutter range of maximum. When the shutter is set to auto mode, this function works.
GX_BUFFER_FRAME_INFORMATION = 6016 | GX_FEATURE_BUFFER | GX_FEATURE_LEVEL_REMOTE_DEV, ///< FrameInformation
GX_INT_CONTRAST_PARAM = 6017 | GX_FEATURE_INT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Contrast parameter
GX_FLOAT_GAMMA_PARAM = 6018 | GX_FEATURE_FLOAT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Gamma parameter
GX_INT_COLOR_CORRECTION_PARAM = 6019 | GX_FEATURE_INT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Color correction coefficient
GX_ENUM_IMAGE_GRAY_RAISE_SWITCH = 6020 | GX_FEATURE_ENUM | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Control ImageGrayRaise is valid, see also GX_IMAGE_GRAY_RAISE_SWITCH_ENTRY
GX_ENUM_AWB_LAMP_HOUSE = 6021 | GX_FEATURE_ENUM | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Refers to the AWB working environment, see also GX_AWB_LAMP_HOUSE_ENTRY
GX_INT_AWBROI_OFFSETX = 6022 | GX_FEATURE_INT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< This value sets the X offset (left offset) for the rect of interest in pixels for Auto WhiteBalance
GX_INT_AWBROI_OFFSETY = 6023 | GX_FEATURE_INT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< This value sets the Y offset (top offset) for the rect of interest for Auto WhiteBalance
GX_INT_AWBROI_WIDTH = 6024 | GX_FEATURE_INT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< This value sets the width of the rect of interest in pixels for Auto WhiteBalance
GX_INT_AWBROI_HEIGHT = 6025 | GX_FEATURE_INT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< This value sets the height of the rect of interest in pixels for Auto WhiteBalance
GX_ENUM_SHARPNESS_MODE = 6026 | GX_FEATURE_ENUM | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Sharpening mode, see also GX_SHARPNESS_MODE_ENTRY
GX_FLOAT_SHARPNESS = 6027 | GX_FEATURE_FLOAT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Sharpness
GX_ENUM_USER_DATA_FILED_SELECTOR = 6028 | GX_FEATURE_ENUM | GX_FEATURE_LEVEL_REMOTE_DEV, ///< User selects Flash data area refer to GX_USER_DATA_FILED_SELECTOR_ENTRY
GX_BUFFER_USER_DATA_FILED_VALUE = 6029 | GX_FEATURE_BUFFER | GX_FEATURE_LEVEL_REMOTE_DEV, ///< User Area Content
GX_ENUM_FLAT_FIELD_CORRECTION = 6030 | GX_FEATURE_ENUM | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Flat field correction switch, refer to GX_FLAT_FIELD_CORRECTION_ENTRY
GX_ENUM_NOISE_REDUCTION_MODE = 6031 | GX_FEATURE_ENUM | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Noise reduction switch, refer to GX_NOISE_REDUCTION_MODE_ENTRY
GX_FLOAT_NOISE_REDUCTION = 6032 | GX_FEATURE_FLOAT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Noise reduction
GX_BUFFER_FFCLOAD = 6033 | GX_FEATURE_BUFFER | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Obtain flat field correction parameters
GX_BUFFER_FFCSAVE = 6034 | GX_FEATURE_BUFFER | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Set flat field correction parameters
GX_ENUM_STATIC_DEFECT_CORRECTION = 6035 | GX_FEATURE_ENUM | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Static bad point correction refer to GX_ENUM_STATIC_DEFECT_CORRECTION_ENTRY
GX_ENUM_2D_NOISE_REDUCTION_MODE = 6036 | GX_FEATURE_ENUM | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Refer to GX_2D_NOISE_REDUCTION_MODE_ENTRY
GX_ENUM_3D_NOISE_REDUCTION_MODE = 6037 | GX_FEATURE_ENUM | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Refer to GX_3D_NOISE_REDUCTION_MODE_ENTRY
GX_COMMAND_CLOSE_ISP = 6038 | GX_FEATURE_COMMAND | GX_FEATURE_LEVEL_REMOTE_DEV,///< Close ISP
GX_BUFFER_STATIC_DEFECT_CORRECTION_VALUE_ALL = 6039 | GX_FEATURE_BUFFER | GX_FEATURE_LEVEL_REMOTE_DEV, ///< static defect conrrection value Refer to GX_BUFFER_FFCSAVE
GX_BUFFER_STATIC_DEFECT_CORRECTION_FLASH_VALUE = 6040 | GX_FEATURE_BUFFER | GX_FEATURE_LEVEL_REMOTE_DEV, ///<static defect conrrection flash value Refer to GX_BUFFER_FFCSAVE
GX_INT_STATIC_DEFECT_CORRECTION_FINISH = 6041 | GX_FEATURE_INT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< static defect conrrection finish Refer to GX_INT_AWBROI_HEIGHT
GX_BUFFER_STATIC_DEFECT_CORRECTION_INFO = 6042 | GX_FEATURE_BUFFER | GX_FEATURE_LEVEL_REMOTE_DEV, ///< static defect conrrection Info Refer to GX_BUFFER_FFCSAVE
GX_COMMAND_STRIP_CALIBRATION_START = 6043 | GX_FEATURE_COMMAND | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Starts the strip calibration
GX_COMMAND_STRIP_CALIBRATION_STOP = 6044 | GX_FEATURE_COMMAND | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Ready to stop the strip calibration
//---------------UserSetControl Section-------------------------
GX_ENUM_USER_SET_SELECTOR = 7000 | GX_FEATURE_ENUM | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Selects the feature User Set to load, save or configure.
GX_COMMAND_USER_SET_LOAD = 7001 | GX_FEATURE_COMMAND | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Loads the User Set specified by UserSetSelector to the device and makes it active.
GX_COMMAND_USER_SET_SAVE = 7002 | GX_FEATURE_COMMAND | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Save the User Set specified by UserSetSelector to the non-volatile memory of the device.
GX_ENUM_USER_SET_DEFAULT = 7003 | GX_FEATURE_ENUM | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Selects the feature User Set to load and make active by default when the device is reset.
//---------------Event Section-------------------------
GX_ENUM_EVENT_SELECTOR = 8000 | GX_FEATURE_ENUM | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Selects which Event to signal to the host application.
GX_ENUM_EVENT_NOTIFICATION = 8001 | GX_FEATURE_ENUM | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Activate or deactivate the notification to the host application of the occurrence of the selected Event.
GX_INT_EVENT_EXPOSUREEND = 8002 | GX_FEATURE_INT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Returns the unique identifier of the ExposureEnd type of Event.
GX_INT_EVENT_EXPOSUREEND_TIMESTAMP = 8003 | GX_FEATURE_INT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Returns the Timestamp of the ExposureEnd Event.
GX_INT_EVENT_EXPOSUREEND_FRAMEID = 8004 | GX_FEATURE_INT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Returns the unique Identifier of the Frame (or image) that generated the ExposureEnd Event.
GX_INT_EVENT_BLOCK_DISCARD = 8005 | GX_FEATURE_INT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< This enumeration value indicates the BlockDiscard event ID.
GX_INT_EVENT_BLOCK_DISCARD_TIMESTAMP = 8006 | GX_FEATURE_INT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Indicates the time stamp for the BlockDiscard event
GX_INT_EVENT_OVERRUN = 8007 | GX_FEATURE_INT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< This enumeration value indicates the EventOverrun event ID.
GX_INT_EVENT_OVERRUN_TIMESTAMP = 8008 | GX_FEATURE_INT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Indicates the time stamp of the EventOverrun event
GX_INT_EVENT_FRAMESTART_OVERTRIGGER = 8009 | GX_FEATURE_INT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< This enumeration value indicates the FrameStartOverTrigger event ID.
GX_INT_EVENT_FRAMESTART_OVERTRIGGER_TIMESTAMP = 8010 | GX_FEATURE_INT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Indicates the time stamp of the FrameStartOverTrigger event
GX_INT_EVENT_BLOCK_NOT_EMPTY = 8011 | GX_FEATURE_INT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< This enumeration value indicates the BlockNotEmpty event.
GX_INT_EVENT_BLOCK_NOT_EMPTY_TIMESTAMP = 8012 | GX_FEATURE_INT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Indicates the time stamp of the BlockNotEmpty event
GX_INT_EVENT_INTERNAL_ERROR = 8013 | GX_FEATURE_INT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< This enumeration value indicates the InternalError event.
GX_INT_EVENT_INTERNAL_ERROR_TIMESTAMP = 8014 | GX_FEATURE_INT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Indicates the time stamp of the InternalError event
GX_INT_EVENT_FRAMEBURSTSTART_OVERTRIGGER = 8015 | GX_FEATURE_INT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Multi frame trigger mask event ID
GX_INT_EVENT_FRAMEBURSTSTART_OVERTRIGGER_FRAMEID = 8016 | GX_FEATURE_INT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Multi frame trigger mask event frame ID
GX_INT_EVENT_FRAMEBURSTSTART_OVERTRIGGER_TIMESTAMP = 8017 | GX_FEATURE_INT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Multi frame trigger mask event timestamp
GX_INT_EVENT_FRAMESTART_WAIT = 8018 | GX_FEATURE_INT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Frame Wait Event ID
GX_INT_EVENT_FRAMESTART_WAIT_TIMESTAMP = 8019 | GX_FEATURE_INT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Frame Wait Event Timestamp
GX_INT_EVENT_FRAMEBURSTSTART_WAIT = 8020 | GX_FEATURE_INT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Multi frame waiting event ID
GX_INT_EVENT_FRAMEBURSTSTART_WAIT_TIMESTAMP = 8021 | GX_FEATURE_INT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Multi frame waiting event timestamp
GX_INT_EVENT_BLOCK_DISCARD_FRAMEID = 8022 | GX_FEATURE_INT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Block Loss Event Frame ID
GX_INT_EVENT_FRAMESTART_OVERTRIGGER_FRAMEID = 8023 | GX_FEATURE_INT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Trigger signal masked event frame ID
GX_INT_EVENT_BLOCK_NOT_EMPTY_FRAMEID = 8024 | GX_FEATURE_INT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< The frame memory is not empty Event frame ID
GX_INT_EVENT_FRAMESTART_WAIT_FRAMEID = 8025 | GX_FEATURE_INT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Frame Wait Event Frame ID
GX_INT_EVENT_FRAMEBURSTSTART_WAIT_FRAMEID = 8026 | GX_FEATURE_INT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Multi frame waiting event frame ID
GX_ENUM_EVENT_SIMPLE_MODE = 8027 | GX_FEATURE_ENUM | GX_FEATURE_LEVEL_REMOTE_DEV, ///< event block ID enable,refer to GX_EVENT_SIMPLE_MODE_ENTRY
//---------------LUT Section-------------------------
GX_ENUM_LUT_SELECTOR = 9000 | GX_FEATURE_ENUM | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Selects which LUT to control.
GX_BUFFER_LUT_VALUEALL = 9001 | GX_FEATURE_BUFFER | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Accesses all the LUT coefficients in a single access without using individual LUTIndex.
GX_BOOL_LUT_ENABLE = 9002 | GX_FEATURE_BOOL | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Activates the selected LUT.
GX_INT_LUT_INDEX = 9003 | GX_FEATURE_INT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Control the index (offset) of the coefficient to access in the selected LUT.
GX_INT_LUT_VALUE = 9004 | GX_FEATURE_INT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Returns the Value at entry LUTIndex of the LUT selected by LUTSelector.
//---------------ChunkData Section-------------------------
GX_BOOL_CHUNKMODE_ACTIVE = 10001 | GX_FEATURE_BOOL | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Activates the inclusion of Chunk data in the payload of the image.
GX_ENUM_CHUNK_SELECTOR = 10002 | GX_FEATURE_ENUM | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Selects which Chunk to enable or control.
GX_BOOL_CHUNK_ENABLE = 10003 | GX_FEATURE_BOOL | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Enables the inclusion of the selected Chunk data in the payload of the image.
//---------------Color Transformation Control-------------------------
GX_ENUM_COLOR_TRANSFORMATION_MODE = 11000 | GX_FEATURE_ENUM | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Color conversion selection, see also GX_COLOR_TRANSFORMATION_MODE_ENTRY
GX_BOOL_COLOR_TRANSFORMATION_ENABLE = 11001 | GX_FEATURE_BOOL | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Activates the selected Color Transformation module.
GX_ENUM_COLOR_TRANSFORMATION_VALUE_SELECTOR = 11002 | GX_FEATURE_ENUM | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Selects the Gain factor or Offset of the Transformation matrix to access in the selected Color Transformation module.
GX_FLOAT_COLOR_TRANSFORMATION_VALUE = 11003 | GX_FEATURE_FLOAT| GX_FEATURE_LEVEL_REMOTE_DEV, ///< Represents the value of the selected Gain factor or Offset inside the Transformation matrix.
GX_ENUM_SATURATION_MODE = 11004 | GX_FEATURE_ENUM | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Saturation Mode refer to GX_ENUM_SATURATION_MODE_ENTRY
GX_INT_SATURATION = 11005 | GX_FEATURE_INT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Saturation
//---------------CounterAndTimerControl Section-------------------------
GX_ENUM_TIMER_SELECTOR = 12000 | GX_FEATURE_ENUM | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Selects which Counter to configure, Refer to GX_TIMER_SELECTOR_ENTRY
GX_FLOAT_TIMER_DURATION = 12001 | GX_FEATURE_FLOAT| GX_FEATURE_LEVEL_REMOTE_DEV, ///< Sets the duration (in microseconds) of the Timer pulse.
GX_FLOAT_TIMER_DELAY = 12002 | GX_FEATURE_FLOAT| GX_FEATURE_LEVEL_REMOTE_DEV, ///< Sets the duration (in microseconds) of the delay to apply at the reception of a trigger before starting the Timer.
GX_ENUM_TIMER_TRIGGER_SOURCE = 12003 | GX_FEATURE_ENUM | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Selects the source of the trigger to start the Timer, Refer to GX_TIMER_TRIGGER_SOURCE_ENTRY
GX_ENUM_COUNTER_SELECTOR = 12004 | GX_FEATURE_ENUM | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Selects which Counter to configure, Refer to GX_COUNTER_SELECTOR_ENTRY
GX_ENUM_COUNTER_EVENT_SOURCE = 12005 | GX_FEATURE_ENUM | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Select the events that will be the source to increment the Counter, Refer to GX_COUNTER_EVENT_SOURCE_ENTRY
GX_ENUM_COUNTER_RESET_SOURCE = 12006 | GX_FEATURE_ENUM | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Selects the signals that will be the source to reset the Counter, Refer to GX_COUNTER_RESET_SOURCE_ENTRY
GX_ENUM_COUNTER_RESET_ACTIVATION = 12007 | GX_FEATURE_ENUM | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Selects the Activation mode of the Counter Reset Source signal, Refer to GX_COUNTER_RESET_ACTIVATION_ENTRY
GX_COMMAND_COUNTER_RESET = 12008 | GX_FEATURE_COMMAND | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Does a software reset of the selected Counter and starts it.
GX_ENUM_COUNTER_TRIGGER_SOURCE = 12009 | GX_FEATURE_ENUM | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Counter trigger source refer to GX_COUNTER_TRIGGER_SOURCE_ENTRY
GX_INT_COUNTER_DURATION = 12010 | GX_FEATURE_INT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Counter Duration
GX_ENUM_TIMER_TRIGGER_ACTIVATION = 12011 | GX_FEATURE_ENUM | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Timer Trigger Activation see also GX_TIMER_TRIGGER_ACTIVATION_ENTRY
//---------------RemoveParameterLimitControl Section-------------------------
GX_ENUM_REMOVE_PARAMETER_LIMIT = 13000 | GX_FEATURE_ENUM | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Cancel parameter range restriction, refer to GX_REMOVE_PARAMETER_LIMIT_ENTRY
//---------------HDRControl Section-------------------------
GX_ENUM_HDR_MODE = 14000 | GX_FEATURE_ENUM | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Refer to GX_HDR_MODE_ENTRY
GX_INT_HDR_TARGET_LONG_VALUE = 14001 | GX_FEATURE_INT | GX_FEATURE_LEVEL_REMOTE_DEV, ///<
GX_INT_HDR_TARGET_SHORT_VALUE = 14002 | GX_FEATURE_INT | GX_FEATURE_LEVEL_REMOTE_DEV, ///<
GX_INT_HDR_TARGET_MAIN_VALUE = 14003 | GX_FEATURE_INT | GX_FEATURE_LEVEL_REMOTE_DEV, ///<
//---------------MultiGrayControl Section-------------------------
GX_ENUM_MGC_MODE = 15001 | GX_FEATURE_ENUM | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Refer to GX_MGC_MODE_ENTRY
GX_INT_MGC_SELECTOR = 15002 | GX_FEATURE_INT | GX_FEATURE_LEVEL_REMOTE_DEV, ///<
GX_FLOAT_MGC_EXPOSURE_TIME = 15003 | GX_FEATURE_FLOAT | GX_FEATURE_LEVEL_REMOTE_DEV, ///<
GX_FLOAT_MGC_GAIN = 15004 | GX_FEATURE_FLOAT | GX_FEATURE_LEVEL_REMOTE_DEV, ///<
//---------------ImageQualityControl Section-------------------------
GX_BUFFER_STRIPED_CALIBRATION_INFO = 16001 | GX_FEATURE_BUFFER | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Fringe calibration information Refer to GX_BUFFER_STATIC_DEFECT_CORRECTION_INFO
GX_FLOAT_CONTRAST = 16002 | GX_FEATURE_FLOAT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Contrast
//---------------GyroControl Section-------------------------
GX_BUFFER_IMU_DATA = 17001 | GX_FEATURE_BUFFER | GX_FEATURE_LEVEL_REMOTE_DEV, ///< IMU data
GX_ENUM_IMU_CONFIG_ACC_RANGE = 17002 | GX_FEATURE_ENUM | GX_FEATURE_LEVEL_REMOTE_DEV, ///< IMU config acc range, refer to GX_IMU_CONFIG_ACC_RANGE_ENTRY
GX_ENUM_IMU_CONFIG_ACC_ODR_LOW_PASS_FILTER_SWITCH = 17003 | GX_FEATURE_ENUM | GX_FEATURE_LEVEL_REMOTE_DEV, ///< IMU config acc odr low pass filter switch, refer to GX_IMU_CONFIG_ACC_ODR_LOW_PASS_FILTER_SWITCH_ENTRY
GX_ENUM_IMU_CONFIG_ACC_ODR = 17004 | GX_FEATURE_ENUM | GX_FEATURE_LEVEL_REMOTE_DEV, ///< IMU config acc odr, refer to GX_IMU_CONFIG_ACC_ODR_ENTRY
GX_ENUM_IMU_CONFIG_ACC_ODR_LOW_PASS_FILTER_FREQUENCY = 17005 | GX_FEATURE_ENUM | GX_FEATURE_LEVEL_REMOTE_DEV, ///< imu config acc odr low pass filter frequency, refer to GX_IMU_CONFIG_ACC_ODR_LOW_PASS_FILTER_FREQUENCY_ENTRY
GX_ENUM_IMU_CONFIG_GYRO_XRANGE = 17006 | GX_FEATURE_ENUM | GX_FEATURE_LEVEL_REMOTE_DEV, ///< imu config gyro Xrange, refer to GX_IMU_CONFIG_GYRO_RANGE_ENTRY
GX_ENUM_IMU_CONFIG_GYRO_YRANGE = 17007 | GX_FEATURE_ENUM | GX_FEATURE_LEVEL_REMOTE_DEV, ///< imu config gyro Yrange, refer to GX_IMU_CONFIG_GYRO_RANGE_ENTRY
GX_ENUM_IMU_CONFIG_GYRO_ZRANGE = 17008 | GX_FEATURE_ENUM | GX_FEATURE_LEVEL_REMOTE_DEV, ///< imu config gyro Zrange, refer to GX_IMU_CONFIG_GYRO_RANGE_ENTRY
GX_ENUM_IMU_CONFIG_GYRO_ODR_LOW_PASS_FILTER_SWITCH = 17009 | GX_FEATURE_ENUM | GX_FEATURE_LEVEL_REMOTE_DEV, ///< imu config gyro odr low pass filter switch, refer to GX_IMU_CONFIG_GYRO_ODR_LOW_PASS_FILTER_SWITCH_ENTRY
GX_ENUM_IMU_CONFIG_GYRO_ODR = 17010 | GX_FEATURE_ENUM | GX_FEATURE_LEVEL_REMOTE_DEV, ///< imu config gyro odr, refer to GX_IMU_CONFIG_GYRO_ODR_ENTRY
GX_ENUM_IMU_CONFIG_GYRO_ODR_LOW_PASS_FILTER_FREQUENCY = 17011 | GX_FEATURE_ENUM | GX_FEATURE_LEVEL_REMOTE_DEV, ///< imu config gyro odr low pass filter frequency, refer to GX_IMU_CONFIG_GYRO_ODR_LOW_PASS_FILTER_FREQUENCY_ENTRY
GX_FLOAT_IMU_ROOM_TEMPERATURE = 17012 | GX_FEATURE_FLOAT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< imu room temperature
GX_ENUM_IMU_TEMPERATURE_ODR = 17013 | GX_FEATURE_ENUM | GX_FEATURE_LEVEL_REMOTE_DEV, ///< imu temperature odr, refer to GX_IMU_TEMPERATURE_ODR_ENTRY
//---------------FrameBufferControl Section-------------------------
GX_INT_FRAME_BUFFER_COUNT = 18001 | GX_FEATURE_INT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Frame memory depth
GX_COMMAND_FRAME_BUFFER_FLUSH = 18002 | GX_FEATURE_COMMAND | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Empty the frame save
//----------------SerialPortControl Section----------------------------------
GX_ENUM_SERIALPORT_SELECTOR = 19001 | GX_FEATURE_ENUM | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Serial port selection
GX_ENUM_SERIALPORT_SOURCE = 19002 | GX_FEATURE_ENUM | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Serial port input source
GX_ENUM_SERIALPORT_BAUDRATE = 19003 | GX_FEATURE_ENUM | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Serial baud rate
GX_INT_SERIALPORT_DATA_BITS = 19004 | GX_FEATURE_INT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Serial port data bit
GX_ENUM_SERIALPORT_STOP_BITS = 19005 | GX_FEATURE_ENUM | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Serial port stop bit
GX_ENUM_SERIALPORT_PARITY = 19006 | GX_FEATURE_ENUM | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Serial port parity
GX_INT_TRANSMIT_QUEUE_MAX_CHARACTER_COUNT = 19007 | GX_FEATURE_INT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Maximum number of characters in transmission queue
GX_INT_TRANSMIT_QUEUE_CURRENT_CHARACTER_COUNT = 19008 | GX_FEATURE_INT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Current number of characters in the transmission queue
GX_INT_RECEIVE_QUEUE_MAX_CHARACTER_COUNT = 19009 | GX_FEATURE_INT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Maximum number of characters in receive queue
GX_INT_RECEIVE_QUEUE_CURRENT_CHARACTER_COUNT = 19010 | GX_FEATURE_INT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Current number of characters in the receive queue
GX_INT_RECEIVE_FRAMING_ERROR_COUNT = 19011 | GX_FEATURE_INT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Received frame error count
GX_INT_RECEIVE_PARITY_ERROR_COUNT = 19012 | GX_FEATURE_INT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Receive parity error count
GX_COMMAND_RECEIVE_QUEUE_CLEAR = 19013 | GX_FEATURE_COMMAND | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Queue Clear
GX_BUFFER_SERIALPORT_DATA = 19014 | GX_FEATURE_BUFFER | GX_FEATURE_LEVEL_REMOTE_DEV, ///< serial data
GX_INT_SERIALPORT_DATA_LENGTH = 19015 | GX_FEATURE_INT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Serial port data length
//--------------EnoderControl Section-------------------------
GX_ENUM_ENCODER_SELECTOR = 22001 | GX_FEATURE_ENUM | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Encoder selector
GX_ENUM_ENCODER_DIRECTION = 22002 | GX_FEATURE_ENUM | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Encoder direction
GX_INT_ENCODER_VALUE = 22003 | GX_FEATURE_INT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Decoder value
GX_ENUM_ENCODER_SOURCEA = 22004 | GX_FEATURE_ENUM | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Encoder phase A input
GX_ENUM_ENCODER_SOURCEB = 22005 | GX_FEATURE_ENUM | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Encoder phase B input
GX_ENUM_ENCODER_MODE = 22006 | GX_FEATURE_ENUM | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Encoder Mode
//////////////////////////////////////////////////////////////////////////
/// Local device layer(Device Feature)
//////////////////////////////////////////////////////////////////////////
GX_DEV_INT_COMMAND_TIMEOUT = 0 | GX_FEATURE_INT | GX_FEATURE_LEVEL_DEV, ///< Indicates the current command timeout of the specific Link.
GX_DEV_INT_COMMAND_RETRY_COUNT = 1 | GX_FEATURE_INT | GX_FEATURE_LEVEL_DEV, ///< Command retry times
//////////////////////////////////////////////////////////////////////////
/// Flow layer(DataStream Feature)
//////////////////////////////////////////////////////////////////////////
GX_DS_INT_ANNOUNCED_BUFFER_COUNT = 0 | GX_FEATURE_INT | GX_FEATURE_LEVEL_DS, ///< Number of Buffers declared
GX_DS_INT_DELIVERED_FRAME_COUNT = 1 | GX_FEATURE_INT | GX_FEATURE_LEVEL_DS, ///< Number of received frames (including residual frames)
GX_DS_INT_LOST_FRAME_COUNT = 2 | GX_FEATURE_INT | GX_FEATURE_LEVEL_DS, ///< Number of frames lost due to insufficient buffers
GX_DS_INT_INCOMPLETE_FRAME_COUNT = 3 | GX_FEATURE_INT | GX_FEATURE_LEVEL_DS, ///< Number of residual frames received
GX_DS_INT_DELIVERED_PACKET_COUNT = 4 | GX_FEATURE_INT | GX_FEATURE_LEVEL_DS, ///< Number of packets received
GX_DS_INT_RESEND_PACKET_COUNT = 5 | GX_FEATURE_INT | GX_FEATURE_LEVEL_DS, ///< Number of retransmission packets
GX_DS_INT_RESCUED_PACKED_COUNT = 6 | GX_FEATURE_INT | GX_FEATURE_LEVEL_DS, ///< Number of successful retransmitted packets
GX_DS_INT_RESEND_COMMAND_COUNT = 7 | GX_FEATURE_INT | GX_FEATURE_LEVEL_DS, ///< Repeat command times
GX_DS_INT_UNEXPECTED_PACKED_COUNT = 8 | GX_FEATURE_INT | GX_FEATURE_LEVEL_DS, ///< Exception packet number
GX_DS_INT_MAX_PACKET_COUNT_IN_ONE_BLOCK = 9 | GX_FEATURE_INT | GX_FEATURE_LEVEL_DS, ///< Maximum number of retransmissions of data blocks
GX_DS_INT_MAX_PACKET_COUNT_IN_ONE_COMMAND = 10 | GX_FEATURE_INT | GX_FEATURE_LEVEL_DS, ///< Maximum number of packets contained in a retransmit command
GX_DS_INT_RESEND_TIMEOUT = 11 | GX_FEATURE_INT | GX_FEATURE_LEVEL_DS, ///< Retransmission timeout time
GX_DS_INT_MAX_WAIT_PACKET_COUNT = 12 | GX_FEATURE_INT | GX_FEATURE_LEVEL_DS, ///< Maximum waiting packet number
GX_DS_ENUM_RESEND_MODE = 13 | GX_FEATURE_ENUM | GX_FEATURE_LEVEL_DS, ///< Retransmission, see also GX_DS_RESEND_MODE_ENTRY
GX_DS_INT_MISSING_BLOCKID_COUNT = 14 | GX_FEATURE_INT | GX_FEATURE_LEVEL_DS, ///< Missing number of BlockID
GX_DS_INT_BLOCK_TIMEOUT = 15 | GX_FEATURE_INT | GX_FEATURE_LEVEL_DS, ///< Data block timeout
GX_DS_INT_STREAM_TRANSFER_SIZE = 16 | GX_FEATURE_INT | GX_FEATURE_LEVEL_DS, ///< size of transfer block
GX_DS_INT_STREAM_TRANSFER_NUMBER_URB = 17 | GX_FEATURE_INT | GX_FEATURE_LEVEL_DS, ///< Number of data blocks transmitted
GX_DS_INT_PACKET_TIMEOUT = 19 | GX_FEATURE_INT | GX_FEATURE_LEVEL_DS, ///< time of package timeout
GX_DS_INT_SOCKET_BUFFER_SIZE = 20 | GX_FEATURE_INT | GX_FEATURE_LEVEL_DS, ///< Socket buffer size in kilobytes
GX_DS_ENUM_STOP_ACQUISITION_MODE = 21 | GX_FEATURE_ENUM | GX_FEATURE_LEVEL_DS, ///< stop acquisition mode
GX_DS_ENUM_STREAM_BUFFER_HANDLING_MODE = 22 | GX_FEATURE_ENUM| GX_FEATURE_LEVEL_DS, ///< Buffer processing mode, refer to GX_DS_STREAM_BUFFER_HANDLING_MODE_ENTRY
GX_DS_INT_ACQUISITION_BUFFER_CACHE_PREC = 23 | GX_FEATURE_INT | GX_FEATURE_LEVEL_DS, ///< Number of buffer caches collected
GX_DS_ENUM_MULTI_RESEND_MODE = 24 | GX_FEATURE_ENUM | GX_FEATURE_LEVEL_DS, ///< Retransmission, see also GX_DS_MULTI_RESEND_MODE_ENTRY
//////////////////////////////////////////////////////////////////////////
/// Deprecated Section
//////////////////////////////////////////////////////////////////////////
GX_STRING_DEVICE_ID = 4 | GX_FEATURE_STRING | GX_FEATURE_LEVEL_REMOTE_DEV, ///< switch to GX_STRING_DEVICE_SERIAL_NUMBER
GX_STRING_DEVICE_HARDWARE_VERSION = 5 | GX_FEATURE_STRING | GX_FEATURE_LEVEL_REMOTE_DEV, ///< Device hardware version
GX_INT_GAIN = 5002 | GX_FEATURE_INT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< switch to GX_FLOAT_GAIN
GX_INT_BLACKLEVEL = 5005 | GX_FEATURE_INT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< switch to GX_FLOAT_BLACKLEVEL
GX_FLOAT_BALANCE_RATIO_SELECTOR = 5007 | GX_FEATURE_ENUM | GX_FEATURE_LEVEL_REMOTE_DEV, ///< switch to GX_ENUM_BALANCE_RATIO_SELECTOR
GX_ENUM_AA_LIGHT_ENVIRMENT = 6007 | GX_FEATURE_ENUM | GX_FEATURE_LEVEL_REMOTE_DEV, ///< switch to GX_ENUM_AA_LIGHT_ENVIRONMENT
GX_INT_ROI_X = 6008 | GX_FEATURE_INT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< switch to GX_INT_AAROI_OFFSETX
GX_INT_ROI_Y = 6009 | GX_FEATURE_INT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< switch to GX_INT_AAROI_OFFSETY
GX_INT_ROI_WIDTH = 6010 | GX_FEATURE_INT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< switch to GX_INT_AAROI_WIDTH
GX_INT_ROI_HEIGHT = 6011 | GX_FEATURE_INT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< switch to GX_INT_AAROI_HEIGHT
GX_INT_AUTO_GAIN_VALUEMIN = 6012 | GX_FEATURE_INT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< switch to GX_FLOAT_AUTO_GAIN_MIN
GX_INT_AUTO_GAIN_VALUEMAX = 6013 | GX_FEATURE_INT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< switch to GX_FLOAT_AUTO_GAIN_MAX
GX_INT_AUTO_SHUTTER_VALUEMIN = 6014 | GX_FEATURE_INT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< switch to GX_FLOAT_AUTO_EXPOSURE_TIME_MIN
GX_INT_AUTO_SHUTTER_VALUEMAX = 6015 | GX_FEATURE_INT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< switch to GX_FLOAT_AUTO_EXPOSURE_TIME_MAX
GX_INT_CONTRASTPARAM = 6017 | GX_FEATURE_INT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< switch to GX_INT_CONTRAST_PARAM
GX_FLOAT_GAMMAPARAM = 6018 | GX_FEATURE_FLOAT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< switch to GX_FLOAT_GAMMA_PARAM
GX_INT_COLORCORRECTIONPARAM = 6019 | GX_FEATURE_INT | GX_FEATURE_LEVEL_REMOTE_DEV, ///< switch to GX_INT_COLOR_CORRECTION_PARAM
GX_DS_INT_MAX_NUM_QUEUE_BUFFER = 18 | GX_FEATURE_INT | GX_FEATURE_LEVEL_DS, ///< the max number queue buffer