Struct graph_csr::GraphIterator

source · [−]
pub struct GraphIterator<'a, N> { /* private fields */ }
Expand description

Iterates over a Graph struct and yields the outgoing edge lists of type &[N] for each node.

Trait Implementations

The type of the elements being iterated over.

Advances the iterator and returns the next value. Read more

🔬This is a nightly-only experimental API. (iter_next_chunk)

Advances the iterator and returns an array containing the next N values. Read more

Returns the bounds on the remaining length of the iterator. Read more

Consumes the iterator, counting the number of iterations and returning it. Read more

Consumes the iterator, returning the last element. Read more

🔬This is a nightly-only experimental API. (iter_advance_by)

Advances the iterator by n elements. Read more

Returns the nth element of the iterator. Read more

Creates an iterator starting at the same point, but stepping by the given amount at each iteration. Read more

Takes two iterators and creates a new iterator over both in sequence. Read more

‘Zips up’ two iterators into a single iterator of pairs. Read more

🔬This is a nightly-only experimental API. (iter_intersperse)

Creates a new iterator which places an item generated by separator between adjacent items of the original iterator. Read more

Takes a closure and creates an iterator which calls that closure on each element. Read more

Calls a closure on each element of an iterator. Read more

Creates an iterator which uses a closure to determine if an element should be yielded. Read more

Creates an iterator that both filters and maps. Read more

Creates an iterator which gives the current iteration count as well as the next value. Read more

Creates an iterator which can use the peek and peek_mut methods to look at the next element of the iterator without consuming it. See their documentation for more information. Read more

Creates an iterator that skips elements based on a predicate. Read more

Creates an iterator that yields elements based on a predicate. Read more

Creates an iterator that both yields elements based on a predicate and maps. Read more

Creates an iterator that skips the first n elements. Read more

Creates an iterator that yields the first n elements, or fewer if the underlying iterator ends sooner. Read more

An iterator adapter similar to fold that holds internal state and produces a new iterator. Read more

Creates an iterator that works like map, but flattens nested structure. Read more

Creates an iterator which ends after the first None. Read more

Does something with each element of an iterator, passing the value on. Read more

Borrows an iterator, rather than consuming it. Read more

Transforms an iterator into a collection. Read more

🔬This is a nightly-only experimental API. (iter_collect_into)

Collects all the items from an iterator into a collection. Read more

Consumes an iterator, creating two collections from it. Read more

🔬This is a nightly-only experimental API. (iter_is_partitioned)

Checks if the elements of this iterator are partitioned according to the given predicate, such that all those that return true precede all those that return false. Read more

An iterator method that applies a function as long as it returns successfully, producing a single, final value. Read more

An iterator method that applies a fallible function to each item in the iterator, stopping at the first error and returning that error. Read more

Folds every element into an accumulator by applying an operation, returning the final result. Read more

Reduces the elements to a single one, by repeatedly applying a reducing operation. Read more

🔬This is a nightly-only experimental API. (iterator_try_reduce)

Reduces the elements to a single one by repeatedly applying a reducing operation. If the closure returns a failure, the failure is propagated back to the caller immediately. Read more

Tests if every element of the iterator matches a predicate. Read more

Tests if any element of the iterator matches a predicate. Read more

Searches for an element of an iterator that satisfies a predicate. Read more

Applies function to the elements of iterator and returns the first non-none result. Read more

🔬This is a nightly-only experimental API. (try_find)

Applies function to the elements of iterator and returns the first true result or the first error. Read more

Searches for an element in an iterator, returning its index. Read more

Returns the element that gives the maximum value from the specified function. Read more

Returns the element that gives the maximum value with respect to the specified comparison function. Read more

Returns the element that gives the minimum value from the specified function. Read more

Returns the element that gives the minimum value with respect to the specified comparison function. Read more

Converts an iterator of pairs into a pair of containers. Read more

Creates an iterator which copies all of its elements. Read more

Creates an iterator which clones all of its elements. Read more

🔬This is a nightly-only experimental API. (iter_array_chunks)

Returns an iterator over N elements of the iterator at a time. Read more

Sums the elements of an iterator. Read more

Iterates over the entire iterator, multiplying all the elements Read more

🔬This is a nightly-only experimental API. (iter_order_by)

Lexicographically compares the elements of this Iterator with those of another with respect to the specified comparison function. Read more

Lexicographically compares the elements of this Iterator with those of another. Read more

🔬This is a nightly-only experimental API. (iter_order_by)

Lexicographically compares the elements of this Iterator with those of another with respect to the specified comparison function. Read more

Determines if the elements of this Iterator are equal to those of another. Read more

🔬This is a nightly-only experimental API. (iter_order_by)

Determines if the elements of this Iterator are equal to those of another with respect to the specified equality function. Read more

Determines if the elements of this Iterator are unequal to those of another. Read more

Determines if the elements of this Iterator are lexicographically less than those of another. Read more

Determines if the elements of this Iterator are lexicographically less or equal to those of another. Read more

Determines if the elements of this Iterator are lexicographically greater than those of another. Read more

Determines if the elements of this Iterator are lexicographically greater than or equal to those of another. Read more

🔬This is a nightly-only experimental API. (is_sorted)

Checks if the elements of this iterator are sorted using the given comparator function. Read more

🔬This is a nightly-only experimental API. (is_sorted)

Checks if the elements of this iterator are sorted using the given key extraction function. Read more

The type of item that this parallel iterator produces. For example, if you use the for_each method, this is the type of item that your closure will be invoked with. Read more

Internal method used to define the behavior of this parallel iterator. You should not need to call this directly. Read more

Executes OP on each item produced by the iterator, in parallel. Read more

Executes OP on the given init value with each item produced by the iterator, in parallel. Read more

Executes OP on a value returned by init with each item produced by the iterator, in parallel. Read more

Executes a fallible OP on each item produced by the iterator, in parallel. Read more

Executes a fallible OP on the given init value with each item produced by the iterator, in parallel. Read more

Executes a fallible OP on a value returned by init with each item produced by the iterator, in parallel. Read more

Counts the number of items in this parallel iterator. Read more

Applies map_op to each item of this iterator, producing a new iterator with the results. Read more

Applies map_op to the given init value with each item of this iterator, producing a new iterator with the results. Read more

Applies map_op to a value returned by init with each item of this iterator, producing a new iterator with the results. Read more

Creates an iterator which clones all of its elements. This may be useful when you have an iterator over &T, but you need T, and that type implements Clone. See also copied(). Read more

Creates an iterator which copies all of its elements. This may be useful when you have an iterator over &T, but you need T, and that type implements Copy. See also cloned(). Read more

Applies inspect_op to a reference to each item of this iterator, producing a new iterator passing through the original items. This is often useful for debugging to see what’s happening in iterator stages. Read more

Mutates each item of this iterator before yielding it. Read more

Applies filter_op to each item of this iterator, producing a new iterator with only the items that gave true results. Read more

Applies filter_op to each item of this iterator to get an Option, producing a new iterator with only the items from Some results. Read more

Applies map_op to each item of this iterator to get nested parallel iterators, producing a new parallel iterator that flattens these back into one. Read more

Applies map_op to each item of this iterator to get nested serial iterators, producing a new parallel iterator that flattens these back into one. Read more

Reduces the items in the iterator into one item using op. The argument identity should be a closure that can produce “identity” value which may be inserted into the sequence as needed to create opportunities for parallel execution. So, for example, if you are doing a summation, then identity() ought to produce something that represents the zero for your type (but consider just calling sum() in that case). Read more

Reduces the items in the iterator into one item using op. If the iterator is empty, None is returned; otherwise, Some is returned. Read more

Parallel fold is similar to sequential fold except that the sequence of items may be subdivided before it is folded. Consider a list of numbers like 22 3 77 89 46. If you used sequential fold to add them (fold(0, |a,b| a+b), you would wind up first adding 0 + 22, then 22 + 3, then 25 + 77, and so forth. The parallel fold works similarly except that it first breaks up your list into sublists, and hence instead of yielding up a single sum at the end, it yields up multiple sums. The number of results is nondeterministic, as is the point where the breaks occur. Read more

Applies fold_op to the given init value with each item of this iterator, finally producing the value for further use. Read more

Performs a fallible parallel fold. Read more

Performs a fallible parallel fold with a cloneable init value. Read more

Sums up the items in the iterator. Read more

Multiplies all the items in the iterator. Read more

Computes the minimum of all the items in the iterator with respect to the given comparison function. If the iterator is empty, None is returned; otherwise, Some(min) is returned. Read more

Computes the item that yields the minimum value for the given function. If the iterator is empty, None is returned; otherwise, Some(item) is returned. Read more

Computes the maximum of all the items in the iterator with respect to the given comparison function. If the iterator is empty, None is returned; otherwise, Some(min) is returned. Read more

Computes the item that yields the maximum value for the given function. If the iterator is empty, None is returned; otherwise, Some(item) is returned. Read more

Takes two iterators and creates a new iterator over both. Read more

Searches for some item in the parallel iterator that matches the given predicate and returns it. This operation is similar to find on sequential iterators but the item returned may not be the first one in the parallel sequence which matches, since we search the entire sequence in parallel. Read more

Searches for the sequentially first item in the parallel iterator that matches the given predicate and returns it. Read more

Searches for the sequentially last item in the parallel iterator that matches the given predicate and returns it. Read more

Applies the given predicate to the items in the parallel iterator and returns any non-None result of the map operation. Read more

Applies the given predicate to the items in the parallel iterator and returns the sequentially first non-None result of the map operation. Read more

Applies the given predicate to the items in the parallel iterator and returns the sequentially last non-None result of the map operation. Read more

Searches for some item in the parallel iterator that matches the given predicate, and if so returns true. Once a match is found, we’ll attempt to stop process the rest of the items. Proving that there’s no match, returning false, does require visiting every item. Read more

Tests that every item in the parallel iterator matches the given predicate, and if so returns true. If a counter-example is found, we’ll attempt to stop processing more items, then return false. Read more

Creates an iterator over the Some items of this iterator, halting as soon as any None is found. Read more

Wraps an iterator with a fuse in case of panics, to halt all threads as soon as possible. Read more

Creates a fresh collection containing all the elements produced by this parallel iterator. Read more

Unzips the items of a parallel iterator into a pair of arbitrary ParallelExtend containers. Read more

Partitions the items of a parallel iterator into a pair of arbitrary ParallelExtend containers. Items for which the predicate returns true go into the first container, and the rest go into the second. Read more

Partitions and maps the items of a parallel iterator into a pair of arbitrary ParallelExtend containers. Either::Left items go into the first container, and Either::Right items go into the second. Read more

Internal method used to define the behavior of this parallel iterator. You should not need to call this directly. Read more

Auto Trait Implementations

Blanket Implementations

Gets the TypeId of self. Read more

Immutably borrows from an owned value. Read more

Mutably borrows from an owned value. Read more

Returns the argument unchanged.

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

The type of the elements being iterated over.

Which kind of iterator are we turning this into?

Creates an iterator from a value. Read more

The parallel iterator type that will be created.

The type of item that the parallel iterator will produce.

Converts self into a parallel iterator. Read more

The alignment of pointer.

The type for initializers.

Initializes a with the given initializer. Read more

Dereferences the given pointer. Read more

Mutably dereferences the given pointer. Read more

Drops the object pointed to by the given pointer. Read more

The type returned in the event of a conversion error.

Performs the conversion.

The type returned in the event of a conversion error.

Performs the conversion.