Struct gpu_alloc::UsageFlags [−][src]
pub struct UsageFlags { /* fields omitted */ }
Memory usage type. Bits set define intended usage for requested memory.
Implementations
impl UsageFlags
[src]
impl UsageFlags
[src]pub const FAST_DEVICE_ACCESS: UsageFlags
[src]
Hints for allocator to find memory with faster device access.
If no flags is specified than FAST_DEVICE_ACCESS
is implied.
pub const HOST_ACCESS: UsageFlags
[src]
Memory will be accessed from host. This flags guarantees that host memory operations will be available. Otherwise implementation is encouraged to use non-host-accessible memory.
pub const DOWNLOAD: UsageFlags
[src]
Hints allocator that memory will be used for data downloading.
Allocator will strongly prefer host-cached memory.
Implies HOST_ACCESS
flag.
pub const UPLOAD: UsageFlags
[src]
Hints allocator that memory will be used for data uploading.
If DOWNLOAD
flag is not set then allocator will assume that
host will access memory in write-only manner and may
pick not host-cached.
Implies HOST_ACCESS
flag.
pub const TRANSIENT: UsageFlags
[src]
Hints allocator that memory will be used for short duration allowing to use faster algorithm with less memory overhead. If use holds returned memory block for too long then effective memory overhead increases instead. Best use case is for staging buffer for single batch of operations.
pub const DEVICE_ADDRESS: UsageFlags
[src]
Requests memory that can be addressed with u64
.
Allows fetching device address for resources bound to that memory.
pub const fn empty() -> UsageFlags
[src]
Returns an empty set of flags
pub const fn all() -> UsageFlags
[src]
Returns the set containing all flags.
pub const fn bits(&self) -> u8
[src]
Returns the raw value of the flags currently stored.
pub fn from_bits(bits: u8) -> Option<UsageFlags>
[src]
Convert from underlying bit representation, unless that representation contains bits that do not correspond to a flag.
pub const fn from_bits_truncate(bits: u8) -> UsageFlags
[src]
Convert from underlying bit representation, dropping any bits that do not correspond to flags.
pub const unsafe fn from_bits_unchecked(bits: u8) -> UsageFlags
[src]
Convert from underlying bit representation, preserving all bits (even those not corresponding to a defined flag).
pub const fn is_empty(&self) -> bool
[src]
Returns true
if no flags are currently stored.
pub const fn is_all(&self) -> bool
[src]
Returns true
if all flags are currently set.
pub const fn intersects(&self, other: UsageFlags) -> bool
[src]
Returns true
if there are flags common to both self
and other
.
pub const fn contains(&self, other: UsageFlags) -> bool
[src]
Returns true
all of the flags in other
are contained within self
.
pub fn insert(&mut self, other: UsageFlags)
[src]
Inserts the specified flags in-place.
pub fn remove(&mut self, other: UsageFlags)
[src]
Removes the specified flags in-place.
pub fn toggle(&mut self, other: UsageFlags)
[src]
Toggles the specified flags in-place.
pub fn set(&mut self, other: UsageFlags, value: bool)
[src]
Inserts or removes the specified flags depending on the passed value.
Trait Implementations
impl BitAnd<UsageFlags> for UsageFlags
[src]
impl BitAnd<UsageFlags> for UsageFlags
[src]type Output = UsageFlags
The resulting type after applying the &
operator.
fn bitand(self, other: UsageFlags) -> UsageFlags
[src]
Returns the intersection between the two sets of flags.
impl BitAndAssign<UsageFlags> for UsageFlags
[src]
impl BitAndAssign<UsageFlags> for UsageFlags
[src]fn bitand_assign(&mut self, other: UsageFlags)
[src]
Disables all flags disabled in the set.
impl BitOr<UsageFlags> for UsageFlags
[src]
impl BitOr<UsageFlags> for UsageFlags
[src]type Output = UsageFlags
The resulting type after applying the |
operator.
fn bitor(self, other: UsageFlags) -> UsageFlags
[src]
Returns the union of the two sets of flags.
impl BitOrAssign<UsageFlags> for UsageFlags
[src]
impl BitOrAssign<UsageFlags> for UsageFlags
[src]fn bitor_assign(&mut self, other: UsageFlags)
[src]
Adds the set of flags.
impl BitXor<UsageFlags> for UsageFlags
[src]
impl BitXor<UsageFlags> for UsageFlags
[src]type Output = UsageFlags
The resulting type after applying the ^
operator.
fn bitxor(self, other: UsageFlags) -> UsageFlags
[src]
Returns the left flags, but with all the right flags toggled.
impl BitXorAssign<UsageFlags> for UsageFlags
[src]
impl BitXorAssign<UsageFlags> for UsageFlags
[src]fn bitxor_assign(&mut self, other: UsageFlags)
[src]
Toggles the set of flags.
impl Clone for UsageFlags
[src]
impl Clone for UsageFlags
[src]fn clone(&self) -> UsageFlags
[src]
pub fn clone_from(&mut self, source: &Self)
1.0.0[src]
impl Copy for UsageFlags
[src]
impl Copy for UsageFlags
[src]impl Eq for UsageFlags
[src]
impl Eq for UsageFlags
[src]impl Extend<UsageFlags> for UsageFlags
[src]
impl Extend<UsageFlags> for UsageFlags
[src]fn extend<T: IntoIterator<Item = UsageFlags>>(&mut self, iterator: T)
[src]
pub fn extend_one(&mut self, item: A)
[src]
pub fn extend_reserve(&mut self, additional: usize)
[src]
impl FromIterator<UsageFlags> for UsageFlags
[src]
impl FromIterator<UsageFlags> for UsageFlags
[src]fn from_iter<T: IntoIterator<Item = UsageFlags>>(iterator: T) -> UsageFlags
[src]
impl Hash for UsageFlags
[src]
impl Hash for UsageFlags
[src]impl Not for UsageFlags
[src]
impl Not for UsageFlags
[src]type Output = UsageFlags
The resulting type after applying the !
operator.
fn not(self) -> UsageFlags
[src]
Returns the complement of this set of flags.
impl Ord for UsageFlags
[src]
impl Ord for UsageFlags
[src]impl PartialEq<UsageFlags> for UsageFlags
[src]
impl PartialEq<UsageFlags> for UsageFlags
[src]fn eq(&self, other: &UsageFlags) -> bool
[src]
fn ne(&self, other: &UsageFlags) -> bool
[src]
impl PartialOrd<UsageFlags> for UsageFlags
[src]
impl PartialOrd<UsageFlags> for UsageFlags
[src]impl StructuralEq for UsageFlags
[src]
impl StructuralEq for UsageFlags
[src]impl StructuralPartialEq for UsageFlags
[src]
impl StructuralPartialEq for UsageFlags
[src]impl Sub<UsageFlags> for UsageFlags
[src]
impl Sub<UsageFlags> for UsageFlags
[src]type Output = UsageFlags
The resulting type after applying the -
operator.
fn sub(self, other: UsageFlags) -> UsageFlags
[src]
Returns the set difference of the two sets of flags.
impl SubAssign<UsageFlags> for UsageFlags
[src]
impl SubAssign<UsageFlags> for UsageFlags
[src]fn sub_assign(&mut self, other: UsageFlags)
[src]
Disables all flags enabled in the set.
Auto Trait Implementations
impl RefUnwindSafe for UsageFlags
impl RefUnwindSafe for UsageFlags
impl Send for UsageFlags
impl Send for UsageFlags
impl Sync for UsageFlags
impl Sync for UsageFlags
impl Unpin for UsageFlags
impl Unpin for UsageFlags
impl UnwindSafe for UsageFlags
impl UnwindSafe for UsageFlags