# How the Pi gets onto the network, in netplan's version 2 format. Raspberry Pi
# OS hands this to NetworkManager.
#
# Yours to edit, before the first boot, on the `bootfs` partition of the flashed
# card. Wired with DHCP needs no change. gled.local works on any of these
# networks: mDNS is link-local and does not care about the subnet.
version: 2
ethernets:
eth0:
dhcp4: true
# Do not hold the boot up when no cable is plugged in.
optional: true
# Art-Net installations often run on an isolated 2.x.x.x or 10.x.x.x
# network without a DHCP server. Replace `dhcp4: true` with a fixed
# address and no gateway, for example:
# dhcp4: false
# addresses: [2.0.0.10/8]
# wifis:
# wlan0:
# dhcp4: true
# optional: true
# # Two-letter country code. Without it the radio stays on the smallest
# # set of channels and may not see your network at all.
# regulatory-domain: DE
# access-points:
# "your-network":
# password: "your-password"