generic-array 1.0.0

//! Useful traits for manipulating sequences of data stored in `GenericArray`s

use super::*;
use core::mem::MaybeUninit;
use core::ops::{Add, Sub};
use core::ptr;
use typenum::operator_aliases::*;

/// Defines some sequence with an associated length and iteration capabilities.
///
/// This is useful for passing N-length generic arrays as generics.
///
/// # Safety
/// Care must be taken when implementing such that methods are safe.
///
/// Lengths must match, and element drop on panic must be handled.
pub unsafe trait GenericSequence<T>: Sized + IntoIterator {
    /// `GenericArray` associated length
    type Length: ArrayLength;

    /// Owned sequence type used in conjuction with reference implementations of `GenericSequence`
    type Sequence: GenericSequence<T, Length = Self::Length> + FromIterator<T>;

    /// Initializes a new sequence instance using the given function.
    ///
    /// If the generator function panics while initializing the sequence,
    /// any already initialized elements will be dropped.
    fn generate<F>(f: F) -> Self::Sequence
    where
        F: FnMut(usize) -> T;

    /// Treats `self` as the right-hand operand in a zip operation
    ///
    /// This is optimized for stack-allocated `GenericArray`s
    #[cfg_attr(not(feature = "internals"), doc(hidden))]
    #[inline(always)]
    fn inverted_zip<B, U, F>(
        self,
        lhs: GenericArray<B, Self::Length>,
        mut f: F,
    ) -> MappedSequence<GenericArray<B, Self::Length>, B, U>
    where
        GenericArray<B, Self::Length>:
            GenericSequence<B, Length = Self::Length> + MappedGenericSequence<B, U>,
        Self: MappedGenericSequence<T, U>,
        F: FnMut(B, Self::Item) -> U,
    {
        unsafe {
            let mut left = ArrayConsumer::new(lhs);

            let (left_array_iter, left_position) = left.iter_position();

            FromIterator::from_iter(left_array_iter.zip(self).map(|(l, right_value)| {
                let left_value = ptr::read(l);

                *left_position += 1;

                f(left_value, right_value)
            }))
        }
    }

    /// Treats `self` as the right-hand operand in a zip operation
    #[cfg_attr(not(feature = "internals"), doc(hidden))]
    #[inline(always)]
    fn inverted_zip2<B, Lhs, U, F>(self, lhs: Lhs, mut f: F) -> MappedSequence<Lhs, B, U>
    where
        Lhs: GenericSequence<B, Length = Self::Length> + MappedGenericSequence<B, U>,
        Self: MappedGenericSequence<T, U>,
        F: FnMut(Lhs::Item, Self::Item) -> U,
    {
        FromIterator::from_iter(lhs.into_iter().zip(self).map(|(l, r)| f(l, r)))
    }
}

/// Accessor for `GenericSequence` item type, which is really `IntoIterator::Item`
///
/// For deeply nested generic mapped sequence types, like shown in `tests/generics.rs`,
/// this can be useful for keeping things organized.
pub type SequenceItem<T> = <T as IntoIterator>::Item;

unsafe impl<'a, T: 'a, S: GenericSequence<T>> GenericSequence<T> for &'a S
where
    &'a S: IntoIterator,
{
    type Length = S::Length;
    type Sequence = S::Sequence;

    #[inline(always)]
    fn generate<F>(f: F) -> Self::Sequence
    where
        F: FnMut(usize) -> T,
    {
        S::generate(f)
    }
}

unsafe impl<'a, T: 'a, S: GenericSequence<T>> GenericSequence<T> for &'a mut S
where
    &'a mut S: IntoIterator,
{
    type Length = S::Length;
    type Sequence = S::Sequence;

    #[inline(always)]
    fn generate<F>(f: F) -> Self::Sequence
    where
        F: FnMut(usize) -> T,
    {
        S::generate(f)
    }
}

/// Defines any `GenericSequence` which can be lengthened or extended by appending
/// or prepending an element to it.
///
/// Any lengthened sequence can be shortened back to the original using `pop_front` or `pop_back`
///
/// # Safety
/// While the [`append`](Lengthen::append) and [`prepend`](Lengthen::prepend)
/// methods are marked safe, care must be taken when implementing them.
pub unsafe trait Lengthen<T>: Sized + GenericSequence<T> {
    /// `GenericSequence` that has one more element than `Self`
    type Longer: Shorten<T, Shorter = Self>;

    /// Returns a new array with the given element appended to the end of it.
    ///
    /// Example:
    ///
    /// ```rust
    /// # use generic_array::{arr, sequence::Lengthen};
    ///
    /// let a = arr![1, 2, 3];
    ///
    /// let b = a.append(4);
    ///
    /// assert_eq!(b, arr![1, 2, 3, 4]);
    /// ```
    fn append(self, last: T) -> Self::Longer;

    /// Returns a new array with the given element prepended to the front of it.
    ///
    /// Example:
    ///
    /// ```rust
    /// # use generic_array::{arr, sequence::Lengthen};
    ///
    /// let a = arr![1, 2, 3];
    ///
    /// let b = a.prepend(4);
    ///
    /// assert_eq!(b, arr![4, 1, 2, 3]);
    /// ```
    fn prepend(self, first: T) -> Self::Longer;
}

/// Defines a `GenericSequence` which can be shortened by removing the first or last element from it.
///
/// Additionally, any shortened sequence can be lengthened by
/// appending or prepending an element to it.
///
/// # Safety
/// While the [`pop_back`](Shorten::pop_back) and [`pop_front`](Shorten::pop_front)
/// methods are marked safe, care must be taken when implementing them.
pub unsafe trait Shorten<T>: Sized + GenericSequence<T> {
    /// `GenericSequence` that has one less element than `Self`
    type Shorter: Lengthen<T, Longer = Self>;

    /// Returns a new array without the last element, and the last element.
    ///
    /// Example:
    ///
    /// ```rust
    /// # use generic_array::{arr, sequence::Shorten};
    ///
    /// let a = arr![1, 2, 3, 4];
    ///
    /// let (init, last) = a.pop_back();
    ///
    /// assert_eq!(init, arr![1, 2, 3]);
    /// assert_eq!(last, 4);
    /// ```
    fn pop_back(self) -> (Self::Shorter, T);

    /// Returns a new array without the first element, and the first element.
    /// Example:
    ///
    /// ```rust
    /// # use generic_array::{arr, sequence::Shorten};
    ///
    /// let a = arr![1, 2, 3, 4];
    ///
    /// let (head, tail) = a.pop_front();
    ///
    /// assert_eq!(head, 1);
    /// assert_eq!(tail, arr![2, 3, 4]);
    /// ```
    fn pop_front(self) -> (T, Self::Shorter);
}

unsafe impl<T, N: ArrayLength> Lengthen<T> for GenericArray<T, N>
where
    N: Add<B1>,
    Add1<N>: ArrayLength,
    Add1<N>: Sub<B1, Output = N>,
    Sub1<Add1<N>>: ArrayLength,
{
    type Longer = GenericArray<T, Add1<N>>;

    #[inline]
    fn append(self, last: T) -> Self::Longer {
        let mut longer: MaybeUninit<Self::Longer> = MaybeUninit::uninit();

        // Note this is *mut Self, so add(1) increments by the whole array
        let out_ptr = longer.as_mut_ptr() as *mut Self;

        unsafe {
            // write self first
            ptr::write(out_ptr, self);
            // increment past self, then write the last
            ptr::write(out_ptr.add(1) as *mut T, last);

            longer.assume_init()
        }
    }

    #[inline]
    fn prepend(self, first: T) -> Self::Longer {
        let mut longer: MaybeUninit<Self::Longer> = MaybeUninit::uninit();

        // Note this is *mut T, so add(1) increments by a single T
        let out_ptr = longer.as_mut_ptr() as *mut T;

        unsafe {
            // write the first at the start
            ptr::write(out_ptr, first);
            // increment past the first, then write self
            ptr::write(out_ptr.add(1) as *mut Self, self);

            longer.assume_init()
        }
    }
}

unsafe impl<T, N: ArrayLength> Shorten<T> for GenericArray<T, N>
where
    N: Sub<B1>,
    Sub1<N>: ArrayLength,
    Sub1<N>: Add<B1, Output = N>,
    Add1<Sub1<N>>: ArrayLength,
{
    type Shorter = GenericArray<T, Sub1<N>>;

    #[inline]
    fn pop_back(self) -> (Self::Shorter, T) {
        let whole = ManuallyDrop::new(self);

        unsafe {
            let init = ptr::read(whole.as_ptr() as _);
            let last = ptr::read(whole.as_ptr().add(Sub1::<N>::USIZE) as _);

            (init, last)
        }
    }

    #[inline]
    fn pop_front(self) -> (T, Self::Shorter) {
        // ensure this doesn't get dropped
        let whole = ManuallyDrop::new(self);

        unsafe {
            let head = ptr::read(whole.as_ptr() as _);
            let tail = ptr::read(whole.as_ptr().offset(1) as _);

            (head, tail)
        }
    }
}

/// Defines a `GenericSequence` that can be split into two parts at a given pivot index.
///
/// # Safety
/// While the [`split`](Split::split) method is marked safe,
/// care must be taken when implementing it.
pub unsafe trait Split<T, K: ArrayLength>: GenericSequence<T> {
    /// First part of the resulting split array
    type First: GenericSequence<T>;
    /// Second part of the resulting split array
    type Second: GenericSequence<T>;

    /// Splits an array at the given index, returning the separate parts of the array.
    fn split(self) -> (Self::First, Self::Second);
}

unsafe impl<T, N, K> Split<T, K> for GenericArray<T, N>
where
    N: ArrayLength,
    K: ArrayLength,
    N: Sub<K>,
    Diff<N, K>: ArrayLength,
{
    type First = GenericArray<T, K>;
    type Second = GenericArray<T, Diff<N, K>>;

    #[inline]
    fn split(self) -> (Self::First, Self::Second) {
        unsafe {
            // ensure this doesn't get dropped
            let whole = ManuallyDrop::new(self);

            let head = ptr::read(whole.as_ptr() as *const _);
            let tail = ptr::read(whole.as_ptr().add(K::USIZE) as *const _);

            (head, tail)
        }
    }
}

unsafe impl<'a, T, N, K> Split<T, K> for &'a GenericArray<T, N>
where
    N: ArrayLength,
    K: ArrayLength,
    N: Sub<K>,
    Diff<N, K>: ArrayLength,
{
    type First = &'a GenericArray<T, K>;
    type Second = &'a GenericArray<T, Diff<N, K>>;

    #[inline]
    fn split(self) -> (Self::First, Self::Second) {
        unsafe {
            let ptr_to_first: *const T = self.as_ptr();
            let head = &*(ptr_to_first as *const _);
            let tail = &*(ptr_to_first.add(K::USIZE) as *const _);
            (head, tail)
        }
    }
}

unsafe impl<'a, T, N, K> Split<T, K> for &'a mut GenericArray<T, N>
where
    N: ArrayLength,
    K: ArrayLength,
    N: Sub<K>,
    Diff<N, K>: ArrayLength,
{
    type First = &'a mut GenericArray<T, K>;
    type Second = &'a mut GenericArray<T, Diff<N, K>>;

    #[inline]
    fn split(self) -> (Self::First, Self::Second) {
        unsafe {
            let ptr_to_first: *mut T = self.as_mut_ptr();
            let head = &mut *(ptr_to_first as *mut _);
            let tail = &mut *(ptr_to_first.add(K::USIZE) as *mut _);
            (head, tail)
        }
    }
}

/// Defines `GenericSequence`s which can be joined together, forming a larger array.
///
/// # Safety
/// While the [`concat`](Concat::concat) method is marked safe,
/// care must be taken when implementing it.
pub unsafe trait Concat<T, M: ArrayLength>: GenericSequence<T> {
    /// Sequence to be concatenated with `self`
    type Rest: GenericSequence<T, Length = M>;

    /// Resulting sequence formed by the concatenation.
    type Output: GenericSequence<T>;

    /// Concatenate, or join, two sequences.
    fn concat(self, rest: Self::Rest) -> Self::Output;
}

unsafe impl<T, N, M> Concat<T, M> for GenericArray<T, N>
where
    N: ArrayLength + Add<M>,
    M: ArrayLength,
    Sum<N, M>: ArrayLength,
{
    type Rest = GenericArray<T, M>;
    type Output = GenericArray<T, Sum<N, M>>;

    #[inline]
    fn concat(self, rest: Self::Rest) -> Self::Output {
        let mut output: MaybeUninit<Self::Output> = MaybeUninit::uninit();

        let out_ptr = output.as_mut_ptr() as *mut Self;

        unsafe {
            // write all of self to the pointer
            ptr::write(out_ptr, self);
            // increment past self, then write the rest
            ptr::write(out_ptr.add(1) as *mut _, rest);

            output.assume_init()
        }
    }
}