#[repr(C)]
#[doc = "Register block"]
pub struct RegisterBlock {
ctl0: Ctl0,
_reserved1: [u8; 0x04],
smcfg: Smcfg,
dmainten: Dmainten,
intf: Intf,
swevg: Swevg,
_reserved_5_chctl0: [u8; 0x04],
_reserved6: [u8; 0x04],
chctl2: Chctl2,
cnt: Cnt,
psc: Psc,
car: Car,
_reserved10: [u8; 0x04],
ch0cv: Ch0cv,
ch1cv: Ch1cv,
_reserved12: [u8; 0xc0],
cfg: Cfg,
}
impl RegisterBlock {
#[doc = "0x00 - control register 0"]
#[inline(always)]
pub const fn ctl0(&self) -> &Ctl0 {
&self.ctl0
}
#[doc = "0x08 - slave mode configuration register"]
#[inline(always)]
pub const fn smcfg(&self) -> &Smcfg {
&self.smcfg
}
#[doc = "0x0c - DMA and interrupt enable register"]
#[inline(always)]
pub const fn dmainten(&self) -> &Dmainten {
&self.dmainten
}
#[doc = "0x10 - interrupt flag register"]
#[inline(always)]
pub const fn intf(&self) -> &Intf {
&self.intf
}
#[doc = "0x14 - event generation register"]
#[inline(always)]
pub const fn swevg(&self) -> &Swevg {
&self.swevg
}
#[doc = "0x18 - Channel control register 0 (input mode)"]
#[inline(always)]
pub const fn chctl0_input(&self) -> &Chctl0Input {
unsafe { &*(self as *const Self).cast::<u8>().add(24).cast() }
}
#[doc = "0x18 - Channel control register 0 (output mode)"]
#[inline(always)]
pub const fn chctl0_output(&self) -> &Chctl0Output {
unsafe { &*(self as *const Self).cast::<u8>().add(24).cast() }
}
#[doc = "0x20 - Channel control register 2"]
#[inline(always)]
pub const fn chctl2(&self) -> &Chctl2 {
&self.chctl2
}
#[doc = "0x24 - Counter register"]
#[inline(always)]
pub const fn cnt(&self) -> &Cnt {
&self.cnt
}
#[doc = "0x28 - Prescaler register"]
#[inline(always)]
pub const fn psc(&self) -> &Psc {
&self.psc
}
#[doc = "0x2c - Counter auto reload register"]
#[inline(always)]
pub const fn car(&self) -> &Car {
&self.car
}
#[doc = "0x34 - Channel 0 capture/compare value register"]
#[inline(always)]
pub const fn ch0cv(&self) -> &Ch0cv {
&self.ch0cv
}
#[doc = "0x38 - Channel 1 capture/compare value register"]
#[inline(always)]
pub const fn ch1cv(&self) -> &Ch1cv {
&self.ch1cv
}
#[doc = "0xfc - configuration register"]
#[inline(always)]
pub const fn cfg(&self) -> &Cfg {
&self.cfg
}
}
#[doc = "CTL0 (rw) register accessor: control register 0\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`ctl0::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`ctl0::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ctl0`]
module"]
#[doc(alias = "CTL0")]
pub type Ctl0 = crate::Reg<ctl0::Ctl0Spec>;
#[doc = "control register 0"]
pub mod ctl0;
#[doc = "SMCFG (rw) register accessor: slave mode configuration register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`smcfg::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`smcfg::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@smcfg`]
module"]
#[doc(alias = "SMCFG")]
pub type Smcfg = crate::Reg<smcfg::SmcfgSpec>;
#[doc = "slave mode configuration register"]
pub mod smcfg;
#[doc = "DMAINTEN (rw) register accessor: DMA and interrupt enable register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`dmainten::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`dmainten::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@dmainten`]
module"]
#[doc(alias = "DMAINTEN")]
pub type Dmainten = crate::Reg<dmainten::DmaintenSpec>;
#[doc = "DMA and interrupt enable register"]
pub mod dmainten;
#[doc = "INTF (rw) register accessor: interrupt flag register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`intf::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`intf::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@intf`]
module"]
#[doc(alias = "INTF")]
pub type Intf = crate::Reg<intf::IntfSpec>;
#[doc = "interrupt flag register"]
pub mod intf;
#[doc = "SWEVG (w) register accessor: event generation register\n\nYou can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`swevg::W`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@swevg`]
module"]
#[doc(alias = "SWEVG")]
pub type Swevg = crate::Reg<swevg::SwevgSpec>;
#[doc = "event generation register"]
pub mod swevg;
#[doc = "CHCTL0_Output (rw) register accessor: Channel control register 0 (output mode)\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`chctl0_output::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`chctl0_output::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@chctl0_output`]
module"]
#[doc(alias = "CHCTL0_Output")]
pub type Chctl0Output = crate::Reg<chctl0_output::Chctl0OutputSpec>;
#[doc = "Channel control register 0 (output mode)"]
pub mod chctl0_output;
#[doc = "CHCTL0_Input (rw) register accessor: Channel control register 0 (input mode)\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`chctl0_input::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`chctl0_input::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@chctl0_input`]
module"]
#[doc(alias = "CHCTL0_Input")]
pub type Chctl0Input = crate::Reg<chctl0_input::Chctl0InputSpec>;
#[doc = "Channel control register 0 (input mode)"]
pub mod chctl0_input;
#[doc = "CHCTL2 (rw) register accessor: Channel control register 2\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`chctl2::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`chctl2::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@chctl2`]
module"]
#[doc(alias = "CHCTL2")]
pub type Chctl2 = crate::Reg<chctl2::Chctl2Spec>;
#[doc = "Channel control register 2"]
pub mod chctl2;
#[doc = "CNT (rw) register accessor: Counter register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cnt::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`cnt::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cnt`]
module"]
#[doc(alias = "CNT")]
pub type Cnt = crate::Reg<cnt::CntSpec>;
#[doc = "Counter register"]
pub mod cnt;
#[doc = "PSC (rw) register accessor: Prescaler register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`psc::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`psc::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@psc`]
module"]
#[doc(alias = "PSC")]
pub type Psc = crate::Reg<psc::PscSpec>;
#[doc = "Prescaler register"]
pub mod psc;
#[doc = "CAR (rw) register accessor: Counter auto reload register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`car::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`car::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@car`]
module"]
#[doc(alias = "CAR")]
pub type Car = crate::Reg<car::CarSpec>;
#[doc = "Counter auto reload register"]
pub mod car;
#[doc = "CH0CV (rw) register accessor: Channel 0 capture/compare value register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`ch0cv::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`ch0cv::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ch0cv`]
module"]
#[doc(alias = "CH0CV")]
pub type Ch0cv = crate::Reg<ch0cv::Ch0cvSpec>;
#[doc = "Channel 0 capture/compare value register"]
pub mod ch0cv;
#[doc = "CH1CV (rw) register accessor: Channel 1 capture/compare value register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`ch1cv::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`ch1cv::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ch1cv`]
module"]
#[doc(alias = "CH1CV")]
pub type Ch1cv = crate::Reg<ch1cv::Ch1cvSpec>;
#[doc = "Channel 1 capture/compare value register"]
pub mod ch1cv;
#[doc = "CFG (rw) register accessor: configuration register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cfg::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`cfg::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
#[doc(alias = "CFG")]
pub type Cfg = crate::Reg<cfg::CfgSpec>;
#[doc = "configuration register"]
pub mod cfg;