futures-timer 1.0.3

Timeouts and intervals for futures.
Documentation
use core::cell::UnsafeCell;
use core::fmt;
use core::sync::atomic::AtomicUsize;
use core::sync::atomic::Ordering::{AcqRel, Acquire, Release};
use core::task::Waker;

/// A synchronization primitive for task wakeup.
///
/// Sometimes the task interested in a given event will change over time.
/// An `AtomicWaker` can coordinate concurrent notifications with the consumer
/// potentially "updating" the underlying task to wake up. This is useful in
/// scenarios where a computation completes in another thread and wants to
/// notify the consumer, but the consumer is in the process of being migrated to
/// a new logical task.
///
/// Consumers should call `register` before checking the result of a computation
/// and producers should call `wake` after producing the computation (this
/// differs from the usual `thread::park` pattern). It is also permitted for
/// `wake` to be called **before** `register`. This results in a no-op.
///
/// A single `AtomicWaker` may be reused for any number of calls to `register` or
/// `wake`.
///
/// `AtomicWaker` does not provide any memory ordering guarantees, as such the
/// user should use caution and use other synchronization primitives to guard
/// the result of the underlying computation.
pub struct AtomicWaker {
    state: AtomicUsize,
    waker: UnsafeCell<Option<Waker>>,
}

/// Idle state
const WAITING: usize = 0;

/// A new waker value is being registered with the `AtomicWaker` cell.
const REGISTERING: usize = 0b01;

/// The waker currently registered with the `AtomicWaker` cell is being woken.
const WAKING: usize = 0b10;

impl AtomicWaker {
    /// Create an `AtomicWaker`.
    pub fn new() -> AtomicWaker {
        // Make sure that task is Sync
        trait AssertSync: Sync {}
        impl AssertSync for Waker {}

        AtomicWaker {
            state: AtomicUsize::new(WAITING),
            waker: UnsafeCell::new(None),
        }
    }

    /// Registers the waker to be notified on calls to `wake`.
    ///
    /// The new task will take place of any previous tasks that were registered
    /// by previous calls to `register`. Any calls to `wake` that happen after
    /// a call to `register` (as defined by the memory ordering rules), will
    /// notify the `register` caller's task and deregister the waker from future
    /// notifications. Because of this, callers should ensure `register` gets
    /// invoked with a new `Waker` **each** time they require a wakeup.
    ///
    /// It is safe to call `register` with multiple other threads concurrently
    /// calling `wake`. This will result in the `register` caller's current
    /// task being notified once.
    ///
    /// This function is safe to call concurrently, but this is generally a bad
    /// idea. Concurrent calls to `register` will attempt to register different
    /// tasks to be notified. One of the callers will win and have its task set,
    /// but there is no guarantee as to which caller will succeed.
    ///
    /// # Examples
    ///
    /// Here is how `register` is used when implementing a flag.
    ///
    /// ```
    /// use futures::future::Future;
    /// use futures::task::{Context, Poll, AtomicWaker};
    /// use std::sync::atomic::AtomicBool;
    /// use std::sync::atomic::Ordering::SeqCst;
    /// use std::pin::Pin;
    ///
    /// struct Flag {
    ///     waker: AtomicWaker,
    ///     set: AtomicBool,
    /// }
    ///
    /// impl Future for Flag {
    ///     type Output = ();
    ///
    ///     fn poll(self: Pin<&mut Self>, cx: &mut Context<'_>) -> Poll<()> {
    ///         // Register **before** checking `set` to avoid a race condition
    ///         // that would result in lost notifications.
    ///         self.waker.register(cx.waker());
    ///
    ///         if self.set.load(SeqCst) {
    ///             Poll::Ready(())
    ///         } else {
    ///             Poll::Pending
    ///         }
    ///     }
    /// }
    /// ```
    pub fn register(&self, waker: &Waker) {
        match self.state.compare_and_swap(WAITING, REGISTERING, Acquire) {
            WAITING => {
                unsafe {
                    // Locked acquired, update the waker cell
                    *self.waker.get() = Some(waker.clone());

                    // Release the lock. If the state transitioned to include
                    // the `WAKING` bit, this means that a wake has been
                    // called concurrently, so we have to remove the waker and
                    // wake it.`
                    //
                    // Start by assuming that the state is `REGISTERING` as this
                    // is what we jut set it to.
                    let res = self
                        .state
                        .compare_exchange(REGISTERING, WAITING, AcqRel, Acquire);

                    match res {
                        Ok(_) => {}
                        Err(actual) => {
                            // This branch can only be reached if a
                            // concurrent thread called `wake`. In this
                            // case, `actual` **must** be `REGISTERING |
                            // `WAKING`.
                            debug_assert_eq!(actual, REGISTERING | WAKING);

                            // Take the waker to wake once the atomic operation has
                            // completed.
                            let waker = (*self.waker.get()).take().unwrap();

                            // Just swap, because no one could change state while state == `REGISTERING` | `WAKING`.
                            self.state.swap(WAITING, AcqRel);

                            // The atomic swap was complete, now
                            // wake the task and return.
                            waker.wake();
                        }
                    }
                }
            }
            WAKING => {
                // Currently in the process of waking the task, i.e.,
                // `wake` is currently being called on the old task handle.
                // So, we call wake on the new waker
                waker.wake_by_ref();
            }
            state => {
                // In this case, a concurrent thread is holding the
                // "registering" lock. This probably indicates a bug in the
                // caller's code as racing to call `register` doesn't make much
                // sense.
                //
                // We just want to maintain memory safety. It is ok to drop the
                // call to `register`.
                debug_assert!(state == REGISTERING || state == REGISTERING | WAKING);
            }
        }
    }

    /// Calls `wake` on the last `Waker` passed to `register`.
    ///
    /// If `register` has not been called yet, then this does nothing.
    pub fn wake(&self) {
        if let Some(waker) = self.take() {
            waker.wake();
        }
    }

    /// Returns the last `Waker` passed to `register`, so that the user can wake it.
    ///
    ///
    /// Sometimes, just waking the AtomicWaker is not fine grained enough. This allows the user
    /// to take the waker and then wake it separately, rather than performing both steps in one
    /// atomic action.
    ///
    /// If a waker has not been registered, this returns `None`.
    pub fn take(&self) -> Option<Waker> {
        // AcqRel ordering is used in order to acquire the value of the `task`
        // cell as well as to establish a `release` ordering with whatever
        // memory the `AtomicWaker` is associated with.
        match self.state.fetch_or(WAKING, AcqRel) {
            WAITING => {
                // The waking lock has been acquired.
                let waker = unsafe { (*self.waker.get()).take() };

                // Release the lock
                self.state.fetch_and(!WAKING, Release);

                waker
            }
            state => {
                // There is a concurrent thread currently updating the
                // associated task.
                //
                // Nothing more to do as the `WAKING` bit has been set. It
                // doesn't matter if there are concurrent registering threads or
                // not.
                //
                debug_assert!(
                    state == REGISTERING || state == REGISTERING | WAKING || state == WAKING
                );
                None
            }
        }
    }
}

impl Default for AtomicWaker {
    fn default() -> Self {
        AtomicWaker::new()
    }
}

impl fmt::Debug for AtomicWaker {
    fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
        write!(f, "AtomicWaker")
    }
}

unsafe impl Send for AtomicWaker {}
unsafe impl Sync for AtomicWaker {}