{
"en": {
"cmd.show_info": "Dev Container: Show Info",
"cmd.show_info_desc": "Show dev container configuration in an info panel",
"cmd.open_config": "Dev Container: Open Config",
"cmd.open_config_desc": "Open devcontainer.json in the editor",
"cmd.run_lifecycle": "Dev Container: Run Lifecycle Command",
"cmd.run_lifecycle_desc": "Pick and run a devcontainer lifecycle command",
"cmd.show_features": "Dev Container: Show Features",
"cmd.show_features_desc": "List installed dev container features",
"cmd.show_ports": "Dev Container: Show Ports",
"cmd.show_ports_desc": "Show configured port forwards",
"cmd.rebuild": "Dev Container: Rebuild",
"cmd.rebuild_desc": "Rebuild the dev container using the devcontainer CLI",
"cmd.attach": "Dev Container: Attach",
"cmd.attach_desc": "Start the dev container and route editing through it",
"cmd.detach": "Dev Container: Detach",
"cmd.detach_desc": "Stop routing through the dev container and go back to local editing",
"status.detected": "Dev Container: %{name} (%{image}) - %{features} features, %{ports} ports",
"status.no_config": "No devcontainer.json found",
"status.panel_opened": "Dev Container info panel opened",
"status.panel_closed": "Dev Container info panel closed",
"status.no_lifecycle": "No lifecycle commands defined",
"status.no_features": "No features configured",
"status.no_ports": "No ports configured",
"status.running": "Running %{name}...",
"status.running_sub": "Running %{name} (%{label})...",
"status.completed": "%{name} completed successfully",
"status.failed": "%{name} failed (exit %{code})",
"status.failed_sub": "%{name} (%{label}) failed (exit %{code})",
"status.cli_not_found": "devcontainer CLI not found. Install with: npm i -g @devcontainers/cli",
"status.copied_install": "Copied: %{cmd}",
"status.rebuilding": "Rebuilding dev container...",
"status.rebuild_done": "Dev container rebuild complete",
"status.rebuild_failed": "Rebuild failed: %{error}",
"popup.cli_title": "Dev Container CLI Not Found",
"popup.cli_message": "The devcontainer CLI is needed for rebuild. Copy the install command below, or dismiss.",
"popup.activate_open_config": "Open Config",
"popup.attach_title": "Dev Container Detected",
"popup.attach_message": "Folder contains a Dev Container configuration ('%{name}'). Reopen in container?",
"popup.attach_action_attach": "Reopen in Container",
"popup.attach_action_dismiss": "Ignore",
"prompt.run_lifecycle": "Run lifecycle command:",
"prompt.features": "Dev Container Features:",
"prompt.ports": "Forwarded Ports:",
"panel.header": "Dev Container: %{name}",
"panel.section_image": "Image",
"panel.section_build": "Build",
"panel.section_compose": "Docker Compose",
"panel.section_features": "Features",
"panel.section_ports": "Ports",
"panel.section_env": "Environment",
"panel.section_mounts": "Mounts",
"panel.section_users": "Users",
"panel.section_lifecycle": "Lifecycle Commands",
"panel.section_host_req": "Host Requirements",
"panel.footer": "Tab: cycle buttons Enter: activate Alt+r: run Alt+o: open Alt+b: rebuild q: close",
"cmd.scaffold_config": "Dev Container: Create Config",
"cmd.scaffold_config_desc": "Create a minimal .devcontainer/devcontainer.json in the workspace",
"status.scaffold_already_exists": "Dev Container config already exists",
"status.scaffold_created": "Created .devcontainer/devcontainer.json",
"status.scaffold_failed": "Failed to create Dev Container config",
"cmd.show_logs": "Dev Container: Show Logs",
"cmd.show_logs_desc": "Show the attached container's recent stdout/stderr via docker logs",
"status.logs_require_container": "Show Logs requires an attached Dev Container",
"status.logs_docker_missing": "docker CLI not found on host",
"status.logs_loading": "Loading container logs...",
"status.logs_shown": "Container logs shown",
"status.logs_empty": "(container has produced no output)",
"indicator.phase_initialize": "Initializing",
"indicator.phase_build": "Building",
"indicator.error_initialize": "initializeCommand failed",
"status.rebuild_parse_failed": "could not parse devcontainer up output",
"status.rebuild_missing_container_id": "missing containerId",
"indicator.error_restart_recovery": "attach did not complete",
"status.build_log_prepare_failed": "Could not prepare build log file",
"status.no_build_log": "No dev container build log yet",
"status.build_log_missing": "Build log file is missing or unreadable",
"status.cancel_nothing_in_flight": "No dev container attach is in progress",
"status.attach_cancelled": "Dev container attach cancelled",
"cmd.show_build_logs": "Dev Container: Show Build Logs",
"cmd.show_build_logs_desc": "Open the most recent devcontainer up build log",
"cmd.cancel_attach": "Dev Container: Cancel Startup",
"cmd.cancel_attach_desc": "Abort an in-flight dev container attach",
"popup.failed_attach_title": "Dev Container Attach Failed",
"popup.failed_attach_message": "Dev container attach failed: %{error}",
"popup.failed_attach_action_retry": "Retry",
"popup.failed_attach_action_show_logs": "Show Build Logs",
"popup.failed_attach_action_reopen_local": "Reopen Locally",
"popup.failed_attach_action_dismiss": "Dismiss (ESC)",
"cmd.show_forwarded_ports_panel": "Dev Container: Show Forwarded Ports",
"cmd.show_forwarded_ports_panel_desc": "Open a live panel tabulating configured and runtime-bound container ports",
"ports_panel.header": "Forwarded Ports",
"ports_panel.col_configured": "Configured",
"ports_panel.col_protocol": "Protocol",
"ports_panel.col_label": "Label",
"ports_panel.col_binding": "Runtime binding",
"ports_panel.no_ports": "No configured or runtime ports to show.",
"ports_panel.footer": "r: refresh q/Esc: close",
"status.ports_panel_opened": "Dev Container Ports panel opened",
"status.ports_panel_refreshed": "Dev Container Ports panel refreshed"
},
"cs": {
"cmd.show_info": "Dev Container: Zobrazit info",
"cmd.show_info_desc": "Zobrazit konfiguraci dev containeru v informacnim panelu",
"cmd.open_config": "Dev Container: Otevrit konfiguraci",
"cmd.open_config_desc": "Otevrit devcontainer.json v editoru",
"cmd.run_lifecycle": "Dev Container: Spustit lifecycle prikaz",
"cmd.run_lifecycle_desc": "Vybrat a spustit lifecycle prikaz devcontaineru",
"cmd.show_features": "Dev Container: Zobrazit features",
"cmd.show_features_desc": "Vypsat nainstalovane features dev containeru",
"cmd.show_ports": "Dev Container: Zobrazit porty",
"cmd.show_ports_desc": "Zobrazit nakonfigurovane presmerovani portu",
"cmd.rebuild": "Dev Container: Sestavit znovu",
"cmd.rebuild_desc": "Znovu sestavit dev container pomoci devcontainer CLI",
"cmd.attach": "Dev Container: Pripojit",
"cmd.attach_desc": "Spustit dev container a smerovat editaci skrze nej",
"cmd.detach": "Dev Container: Odpojit",
"cmd.detach_desc": "Ukoncit smerovani pres dev container a vratit se k lokalni editaci",
"status.detected": "Dev Container: %{name} (%{image}) - %{features} features, %{ports} portu",
"status.no_config": "devcontainer.json nenalezen",
"status.panel_opened": "Informacni panel Dev Containeru otevren",
"status.panel_closed": "Informacni panel Dev Containeru zavren",
"status.no_lifecycle": "Zadne lifecycle prikazy nejsou definovany",
"status.no_features": "Zadne features nejsou nakonfigurovany",
"status.no_ports": "Zadne porty nejsou nakonfigurovany",
"status.running": "Spoustim %{name}...",
"status.running_sub": "Spoustim %{name} (%{label})...",
"status.completed": "%{name} uspesne dokonceno",
"status.failed": "%{name} selhalo (navratovy kod %{code})",
"status.failed_sub": "%{name} (%{label}) selhalo (navratovy kod %{code})",
"status.cli_not_found": "devcontainer CLI nenalezeno. Nainstalujte: npm i -g @devcontainers/cli",
"status.copied_install": "Zkopirovano: %{cmd}",
"status.rebuilding": "Znovu sestavuji dev container...",
"status.rebuild_done": "Sestaveni dev containeru dokonceno",
"status.rebuild_failed": "Sestaveni selhalo: %{error}",
"popup.cli_title": "Dev Container CLI nenalezeno",
"popup.cli_message": "CLI devcontainer je potrebny pro znovu sestaveni. Zkopirujte instalacni prikaz nize, nebo zavrete.",
"popup.activate_open_config": "Otevrit konfiguraci",
"popup.attach_title": "Dev container nalezen",
"popup.attach_message": "Pripojit k dev containeru '%{name}'? Editor se restartuje, aby soubory a terminaly prochazely skrze container.",
"popup.attach_action_attach": "Znovu otevřít v kontejneru",
"popup.attach_action_dismiss": "Ignorovat",
"prompt.run_lifecycle": "Spustit lifecycle prikaz:",
"prompt.features": "Dev Container Features:",
"prompt.ports": "Presmerovane porty:",
"panel.header": "Dev Container: %{name}",
"panel.section_image": "Image",
"panel.section_build": "Build",
"panel.section_compose": "Docker Compose",
"panel.section_features": "Features",
"panel.section_ports": "Porty",
"panel.section_env": "Promenne prostredi",
"panel.section_mounts": "Pripojeni",
"panel.section_users": "Uzivatele",
"panel.section_lifecycle": "Lifecycle prikazy",
"panel.section_host_req": "Pozadavky na hostitele",
"panel.footer": "Tab: prepnout Enter: aktivovat Alt+r: lifecycle Alt+o: otevrit Alt+b: sestavit q: zavrit",
"cmd.scaffold_config": "Dev Container: Vytvořit konfiguraci",
"cmd.scaffold_config_desc": "Vytvořit minimální .devcontainer/devcontainer.json v pracovním prostoru",
"status.scaffold_already_exists": "Konfigurace Dev Containeru již existuje",
"status.scaffold_created": "Vytvořeno .devcontainer/devcontainer.json",
"status.scaffold_failed": "Nepodařilo se vytvořit konfiguraci Dev Containeru",
"cmd.show_logs": "Dev Container: Zobrazit logy",
"cmd.show_logs_desc": "Zobrazit poslední stdout/stderr připojeného kontejneru přes docker logs",
"status.logs_require_container": "Zobrazení logů vyžaduje připojený Dev Container",
"status.logs_docker_missing": "docker CLI nebylo nalezeno na hostiteli",
"status.logs_loading": "Načítám logy kontejneru...",
"status.logs_shown": "Logy kontejneru zobrazeny",
"status.logs_empty": "(kontejner neprodukoval žádný výstup)",
"indicator.phase_initialize": "Inicializace",
"indicator.phase_build": "Sestavování",
"indicator.error_initialize": "initializeCommand selhal",
"status.rebuild_parse_failed": "nelze zpracovat výstup devcontainer up",
"status.rebuild_missing_container_id": "chybí containerId",
"indicator.error_restart_recovery": "připojení nebylo dokončeno",
"status.build_log_prepare_failed": "Nelze připravit soubor s protokolem sestavení",
"status.no_build_log": "Žádný protokol sestavení dev containeru zatím není",
"status.build_log_missing": "Soubor s protokolem sestavení chybí nebo je nečitelný",
"status.cancel_nothing_in_flight": "Neprobíhá žádné připojování dev containeru",
"status.attach_cancelled": "Připojování dev containeru zrušeno",
"cmd.show_build_logs": "Dev Container: Zobrazit protokol sestavení",
"cmd.show_build_logs_desc": "Otevřít protokol posledního devcontainer up",
"cmd.cancel_attach": "Dev Container: Zrušit spouštění",
"cmd.cancel_attach_desc": "Přerušit probíhající připojování dev containeru",
"popup.failed_attach_title": "Pripojeni k dev containeru selhalo",
"popup.failed_attach_message": "Pripojeni k dev containeru selhalo: %{error}",
"popup.failed_attach_action_retry": "Zkusit znovu",
"popup.failed_attach_action_show_logs": "Zobrazit logy sestaveni",
"popup.failed_attach_action_reopen_local": "Otevrit lokalne",
"popup.failed_attach_action_dismiss": "Zavrit (ESC)",
"cmd.show_forwarded_ports_panel": "Dev Container: Zobrazit přesměrované porty",
"cmd.show_forwarded_ports_panel_desc": "Otevřít panel s přehledem nakonfigurovaných a runtime přesměrovaných portů kontejneru",
"ports_panel.header": "Přesměrované porty",
"ports_panel.col_configured": "Konfigurovaný",
"ports_panel.col_protocol": "Protokol",
"ports_panel.col_label": "Popis",
"ports_panel.col_binding": "Runtime vazba",
"ports_panel.no_ports": "Žádné porty k zobrazení.",
"ports_panel.footer": "r: obnovit q/Esc: zavřít",
"status.ports_panel_opened": "Panel přesměrovaných portů otevřen",
"status.ports_panel_refreshed": "Panel přesměrovaných portů obnoven"
},
"de": {
"cmd.show_info": "Dev Container: Info anzeigen",
"cmd.show_info_desc": "Dev-Container-Konfiguration im Infopanel anzeigen",
"cmd.open_config": "Dev Container: Konfiguration oeffnen",
"cmd.open_config_desc": "devcontainer.json im Editor oeffnen",
"cmd.run_lifecycle": "Dev Container: Lifecycle-Befehl ausfuehren",
"cmd.run_lifecycle_desc": "Einen Devcontainer-Lifecycle-Befehl auswaehlen und ausfuehren",
"cmd.show_features": "Dev Container: Features anzeigen",
"cmd.show_features_desc": "Installierte Dev-Container-Features auflisten",
"cmd.show_ports": "Dev Container: Ports anzeigen",
"cmd.show_ports_desc": "Konfigurierte Portweiterleitungen anzeigen",
"cmd.rebuild": "Dev Container: Neu erstellen",
"cmd.rebuild_desc": "Dev Container mit devcontainer CLI neu erstellen",
"cmd.attach": "Dev Container: Anhaengen",
"cmd.attach_desc": "Dev Container starten und Bearbeitung darueber leiten",
"cmd.detach": "Dev Container: Loesen",
"cmd.detach_desc": "Leitung ueber den Dev Container beenden und zur lokalen Bearbeitung zurueckkehren",
"status.detected": "Dev Container: %{name} (%{image}) - %{features} Features, %{ports} Ports",
"status.no_config": "Keine devcontainer.json gefunden",
"status.panel_opened": "Dev-Container-Infopanel geoeffnet",
"status.panel_closed": "Dev-Container-Infopanel geschlossen",
"status.no_lifecycle": "Keine Lifecycle-Befehle definiert",
"status.no_features": "Keine Features konfiguriert",
"status.no_ports": "Keine Ports konfiguriert",
"status.running": "%{name} wird ausgefuehrt...",
"status.running_sub": "%{name} (%{label}) wird ausgefuehrt...",
"status.completed": "%{name} erfolgreich abgeschlossen",
"status.failed": "%{name} fehlgeschlagen (Exit-Code %{code})",
"status.failed_sub": "%{name} (%{label}) fehlgeschlagen (Exit-Code %{code})",
"status.cli_not_found": "devcontainer CLI nicht gefunden. Installieren mit: npm i -g @devcontainers/cli",
"status.copied_install": "Kopiert: %{cmd}",
"status.rebuilding": "Dev Container wird neu erstellt...",
"status.rebuild_done": "Dev-Container-Neuerstellung abgeschlossen",
"status.rebuild_failed": "Neuerstellung fehlgeschlagen: %{error}",
"popup.cli_title": "Dev Container CLI nicht gefunden",
"popup.cli_message": "Das devcontainer CLI wird fuer die Neuerstellung benoetigt. Kopieren Sie den Installationsbefehl oder schliessen Sie.",
"popup.activate_open_config": "Konfiguration oeffnen",
"popup.attach_title": "Dev Container gefunden",
"popup.attach_message": "An Dev Container '%{name}' anhaengen? Der Editor startet neu, damit Datei-Operationen und Terminals ueber den Container laufen.",
"popup.attach_action_attach": "Im Container erneut öffnen",
"popup.attach_action_dismiss": "Ignorieren",
"prompt.run_lifecycle": "Lifecycle-Befehl ausfuehren:",
"prompt.features": "Dev-Container-Features:",
"prompt.ports": "Weitergeleitete Ports:",
"panel.header": "Dev Container: %{name}",
"panel.section_image": "Image",
"panel.section_build": "Build",
"panel.section_compose": "Docker Compose",
"panel.section_features": "Features",
"panel.section_ports": "Ports",
"panel.section_env": "Umgebungsvariablen",
"panel.section_mounts": "Einhaengungen",
"panel.section_users": "Benutzer",
"panel.section_lifecycle": "Lifecycle-Befehle",
"panel.section_host_req": "Hostanforderungen",
"panel.footer": "Tab: Wechseln Enter: Aktivieren Alt+r: Lifecycle Alt+o: Oeffnen Alt+b: Erstellen q: Schliessen",
"cmd.scaffold_config": "Dev Container: Konfiguration erstellen",
"cmd.scaffold_config_desc": "Minimale .devcontainer/devcontainer.json im Workspace erstellen",
"status.scaffold_already_exists": "Dev-Container-Konfiguration existiert bereits",
"status.scaffold_created": ".devcontainer/devcontainer.json erstellt",
"status.scaffold_failed": "Dev-Container-Konfiguration konnte nicht erstellt werden",
"cmd.show_logs": "Dev Container: Logs anzeigen",
"cmd.show_logs_desc": "Kürzliche stdout/stderr des angehängten Containers via docker logs anzeigen",
"status.logs_require_container": "Logs anzeigen erfordert einen angehängten Dev Container",
"status.logs_docker_missing": "docker CLI auf dem Host nicht gefunden",
"status.logs_loading": "Container-Logs werden geladen...",
"status.logs_shown": "Container-Logs angezeigt",
"status.logs_empty": "(Container hat keine Ausgabe produziert)",
"indicator.phase_initialize": "Initialisieren",
"indicator.phase_build": "Erstellen",
"indicator.error_initialize": "initializeCommand fehlgeschlagen",
"status.rebuild_parse_failed": "Ausgabe von devcontainer up konnte nicht analysiert werden",
"status.rebuild_missing_container_id": "containerId fehlt",
"indicator.error_restart_recovery": "Anhängen nicht abgeschlossen",
"status.build_log_prepare_failed": "Build-Protokolldatei konnte nicht vorbereitet werden",
"status.no_build_log": "Noch kein Dev Container Build-Protokoll vorhanden",
"status.build_log_missing": "Build-Protokolldatei fehlt oder ist nicht lesbar",
"status.cancel_nothing_in_flight": "Kein Dev Container-Anhang läuft gerade",
"status.attach_cancelled": "Dev Container-Anhang abgebrochen",
"cmd.show_build_logs": "Dev Container: Build-Protokolle anzeigen",
"cmd.show_build_logs_desc": "Öffnet das letzte devcontainer up Build-Protokoll",
"cmd.cancel_attach": "Dev Container: Start abbrechen",
"cmd.cancel_attach_desc": "Bricht einen laufenden Dev Container-Anhang ab",
"popup.failed_attach_title": "Verbindung zum Dev Container fehlgeschlagen",
"popup.failed_attach_message": "Verbindung zum Dev Container fehlgeschlagen: %{error}",
"popup.failed_attach_action_retry": "Erneut versuchen",
"popup.failed_attach_action_show_logs": "Build-Logs anzeigen",
"popup.failed_attach_action_reopen_local": "Lokal oeffnen",
"popup.failed_attach_action_dismiss": "Schliessen (ESC)",
"cmd.show_forwarded_ports_panel": "Dev Container: Weitergeleitete Ports anzeigen",
"cmd.show_forwarded_ports_panel_desc": "Live-Panel mit konfigurierten und zur Laufzeit gebundenen Container-Ports oeffnen",
"ports_panel.header": "Weitergeleitete Ports",
"ports_panel.col_configured": "Konfiguriert",
"ports_panel.col_protocol": "Protokoll",
"ports_panel.col_label": "Label",
"ports_panel.col_binding": "Laufzeit-Bindung",
"ports_panel.no_ports": "Keine konfigurierten oder aktiven Ports.",
"ports_panel.footer": "r: aktualisieren q/Esc: schliessen",
"status.ports_panel_opened": "Panel fuer weitergeleitete Ports geoeffnet",
"status.ports_panel_refreshed": "Panel fuer weitergeleitete Ports aktualisiert"
},
"es": {
"cmd.show_info": "Dev Container: Mostrar Info",
"cmd.show_info_desc": "Mostrar configuracion del dev container en un panel informativo",
"cmd.open_config": "Dev Container: Abrir Config",
"cmd.open_config_desc": "Abrir devcontainer.json en el editor",
"cmd.run_lifecycle": "Dev Container: Ejecutar Comando Lifecycle",
"cmd.run_lifecycle_desc": "Seleccionar y ejecutar un comando lifecycle del devcontainer",
"cmd.show_features": "Dev Container: Mostrar Features",
"cmd.show_features_desc": "Listar features instaladas del dev container",
"cmd.show_ports": "Dev Container: Mostrar Puertos",
"cmd.show_ports_desc": "Mostrar redirecciones de puertos configuradas",
"cmd.rebuild": "Dev Container: Reconstruir",
"cmd.rebuild_desc": "Reconstruir el dev container usando el CLI devcontainer",
"cmd.attach": "Dev Container: Conectar",
"cmd.attach_desc": "Iniciar el dev container y enrutar la edicion a traves de el",
"cmd.detach": "Dev Container: Desconectar",
"cmd.detach_desc": "Dejar de enrutar a traves del dev container y volver a la edicion local",
"status.detected": "Dev Container: %{name} (%{image}) - %{features} features, %{ports} puertos",
"status.no_config": "No se encontro devcontainer.json",
"status.panel_opened": "Panel informativo de Dev Container abierto",
"status.panel_closed": "Panel informativo de Dev Container cerrado",
"status.no_lifecycle": "No hay comandos lifecycle definidos",
"status.no_features": "No hay features configuradas",
"status.no_ports": "No hay puertos configurados",
"status.running": "Ejecutando %{name}...",
"status.running_sub": "Ejecutando %{name} (%{label})...",
"status.completed": "%{name} completado exitosamente",
"status.failed": "%{name} fallo (codigo de salida %{code})",
"status.failed_sub": "%{name} (%{label}) fallo (codigo de salida %{code})",
"status.cli_not_found": "CLI devcontainer no encontrado. Instalar con: npm i -g @devcontainers/cli",
"status.copied_install": "Copiado: %{cmd}",
"status.rebuilding": "Reconstruyendo dev container...",
"status.rebuild_done": "Reconstruccion del dev container completada",
"status.rebuild_failed": "Reconstruccion fallida: %{error}",
"popup.cli_title": "CLI Dev Container no encontrado",
"popup.cli_message": "El CLI devcontainer es necesario para reconstruir. Copie el comando de instalacion o descarte.",
"popup.activate_open_config": "Abrir config",
"popup.attach_title": "Dev container detectado",
"popup.attach_message": "Conectar al dev container '%{name}'? El editor se reiniciara para que las operaciones de archivo y los terminales pasen por el container.",
"popup.attach_action_attach": "Reabrir en contenedor",
"popup.attach_action_dismiss": "Ignorar",
"prompt.run_lifecycle": "Ejecutar comando lifecycle:",
"prompt.features": "Features de Dev Container:",
"prompt.ports": "Puertos redirigidos:",
"panel.header": "Dev Container: %{name}",
"panel.section_image": "Imagen",
"panel.section_build": "Build",
"panel.section_compose": "Docker Compose",
"panel.section_features": "Features",
"panel.section_ports": "Puertos",
"panel.section_env": "Variables de Entorno",
"panel.section_mounts": "Montajes",
"panel.section_users": "Usuarios",
"panel.section_lifecycle": "Comandos Lifecycle",
"panel.section_host_req": "Requisitos del Host",
"panel.footer": "Tab: ciclar Enter: activar Alt+r: lifecycle Alt+o: abrir Alt+b: reconstruir q: cerrar",
"cmd.scaffold_config": "Dev Container: Crear configuración",
"cmd.scaffold_config_desc": "Crear un .devcontainer/devcontainer.json mínimo en el workspace",
"status.scaffold_already_exists": "La configuración del Dev Container ya existe",
"status.scaffold_created": ".devcontainer/devcontainer.json creado",
"status.scaffold_failed": "No se pudo crear la configuración del Dev Container",
"cmd.show_logs": "Dev Container: Mostrar logs",
"cmd.show_logs_desc": "Mostrar stdout/stderr reciente del contenedor adjunto vía docker logs",
"status.logs_require_container": "Mostrar logs requiere un Dev Container adjunto",
"status.logs_docker_missing": "CLI docker no encontrado en el host",
"status.logs_loading": "Cargando logs del contenedor...",
"status.logs_shown": "Logs del contenedor mostrados",
"status.logs_empty": "(el contenedor no ha producido salida)",
"indicator.phase_initialize": "Inicializando",
"indicator.phase_build": "Construyendo",
"indicator.error_initialize": "initializeCommand falló",
"status.rebuild_parse_failed": "no se pudo analizar la salida de devcontainer up",
"status.rebuild_missing_container_id": "falta containerId",
"indicator.error_restart_recovery": "la conexión no se completó",
"status.build_log_prepare_failed": "No se pudo preparar el archivo de registro de compilación",
"status.no_build_log": "Aún no hay registro de compilación del dev container",
"status.build_log_missing": "El archivo de registro de compilación falta o es ilegible",
"status.cancel_nothing_in_flight": "No hay ninguna conexión de dev container en curso",
"status.attach_cancelled": "Conexión de dev container cancelada",
"cmd.show_build_logs": "Dev Container: Mostrar registros de compilación",
"cmd.show_build_logs_desc": "Abre el registro del último devcontainer up",
"cmd.cancel_attach": "Dev Container: Cancelar inicio",
"cmd.cancel_attach_desc": "Aborta una conexión de dev container en curso",
"popup.failed_attach_title": "Error al conectar al dev container",
"popup.failed_attach_message": "Error al conectar al dev container: %{error}",
"popup.failed_attach_action_retry": "Reintentar",
"popup.failed_attach_action_show_logs": "Mostrar logs de compilacion",
"popup.failed_attach_action_reopen_local": "Reabrir en local",
"popup.failed_attach_action_dismiss": "Descartar (ESC)",
"cmd.show_forwarded_ports_panel": "Dev Container: Mostrar puertos reenviados",
"cmd.show_forwarded_ports_panel_desc": "Abrir un panel con los puertos configurados y los enlaces en tiempo de ejecucion",
"ports_panel.header": "Puertos reenviados",
"ports_panel.col_configured": "Configurado",
"ports_panel.col_protocol": "Protocolo",
"ports_panel.col_label": "Etiqueta",
"ports_panel.col_binding": "Enlace en ejecucion",
"ports_panel.no_ports": "No hay puertos configurados ni en ejecucion.",
"ports_panel.footer": "r: refrescar q/Esc: cerrar",
"status.ports_panel_opened": "Panel de puertos reenviados abierto",
"status.ports_panel_refreshed": "Panel de puertos reenviados actualizado"
},
"fr": {
"cmd.show_info": "Dev Container: Afficher les infos",
"cmd.show_info_desc": "Afficher la configuration du dev container dans un panneau",
"cmd.open_config": "Dev Container: Ouvrir la config",
"cmd.open_config_desc": "Ouvrir devcontainer.json dans l'editeur",
"cmd.run_lifecycle": "Dev Container: Executer commande lifecycle",
"cmd.run_lifecycle_desc": "Choisir et executer une commande lifecycle du devcontainer",
"cmd.show_features": "Dev Container: Afficher les features",
"cmd.show_features_desc": "Lister les features installees du dev container",
"cmd.show_ports": "Dev Container: Afficher les ports",
"cmd.show_ports_desc": "Afficher les redirections de ports configurees",
"cmd.rebuild": "Dev Container: Reconstruire",
"cmd.rebuild_desc": "Reconstruire le dev container avec le CLI devcontainer",
"cmd.attach": "Dev Container: Attacher",
"cmd.attach_desc": "Demarrer le dev container et y router les operations d'edition",
"cmd.detach": "Dev Container: Detacher",
"cmd.detach_desc": "Arreter le routage via le dev container et revenir a l'edition locale",
"status.detected": "Dev Container: %{name} (%{image}) - %{features} features, %{ports} ports",
"status.no_config": "Aucun devcontainer.json trouve",
"status.panel_opened": "Panneau d'info Dev Container ouvert",
"status.panel_closed": "Panneau d'info Dev Container ferme",
"status.no_lifecycle": "Aucune commande lifecycle definie",
"status.no_features": "Aucune feature configuree",
"status.no_ports": "Aucun port configure",
"status.running": "Execution de %{name}...",
"status.running_sub": "Execution de %{name} (%{label})...",
"status.completed": "%{name} termine avec succes",
"status.failed": "%{name} echoue (code de sortie %{code})",
"status.failed_sub": "%{name} (%{label}) echoue (code de sortie %{code})",
"status.cli_not_found": "CLI devcontainer introuvable. Installer avec: npm i -g @devcontainers/cli",
"status.copied_install": "Copie: %{cmd}",
"status.rebuilding": "Reconstruction du dev container...",
"status.rebuild_done": "Reconstruction du dev container terminee",
"status.rebuild_failed": "Reconstruction echouee: %{error}",
"popup.cli_title": "CLI Dev Container introuvable",
"popup.cli_message": "Le CLI devcontainer est necessaire pour la reconstruction. Copiez la commande d'installation ou fermez.",
"popup.activate_open_config": "Ouvrir la config",
"popup.attach_title": "Dev container detecte",
"popup.attach_message": "Attacher le dev container '%{name}' ? L'editeur va redemarrer pour que les E/S de fichiers et les terminaux passent par le container.",
"popup.attach_action_attach": "Rouvrir dans le conteneur",
"popup.attach_action_dismiss": "Ignorer",
"prompt.run_lifecycle": "Executer commande lifecycle:",
"prompt.features": "Features Dev Container:",
"prompt.ports": "Ports rediriges:",
"panel.header": "Dev Container: %{name}",
"panel.section_image": "Image",
"panel.section_build": "Build",
"panel.section_compose": "Docker Compose",
"panel.section_features": "Features",
"panel.section_ports": "Ports",
"panel.section_env": "Variables d'environnement",
"panel.section_mounts": "Montages",
"panel.section_users": "Utilisateurs",
"panel.section_lifecycle": "Commandes Lifecycle",
"panel.section_host_req": "Exigences de l'hote",
"panel.footer": "Tab: cycler Enter: activer Alt+r: lifecycle Alt+o: ouvrir Alt+b: reconstruire q: fermer",
"cmd.scaffold_config": "Dev Container: Créer la configuration",
"cmd.scaffold_config_desc": "Créer un .devcontainer/devcontainer.json minimal dans l'espace de travail",
"status.scaffold_already_exists": "La configuration Dev Container existe déjà",
"status.scaffold_created": ".devcontainer/devcontainer.json créé",
"status.scaffold_failed": "Échec de la création de la configuration Dev Container",
"cmd.show_logs": "Dev Container: Afficher les logs",
"cmd.show_logs_desc": "Afficher les stdout/stderr récents du conteneur attaché via docker logs",
"status.logs_require_container": "Afficher les logs nécessite un Dev Container attaché",
"status.logs_docker_missing": "CLI docker introuvable sur l'hôte",
"status.logs_loading": "Chargement des logs du conteneur...",
"status.logs_shown": "Logs du conteneur affichés",
"status.logs_empty": "(le conteneur n'a produit aucune sortie)",
"indicator.phase_initialize": "Initialisation",
"indicator.phase_build": "Construction",
"indicator.error_initialize": "initializeCommand a échoué",
"status.rebuild_parse_failed": "impossible d'analyser la sortie de devcontainer up",
"status.rebuild_missing_container_id": "containerId manquant",
"indicator.error_restart_recovery": "l'attachement n'a pas abouti",
"status.build_log_prepare_failed": "Impossible de préparer le fichier journal de compilation",
"status.no_build_log": "Aucun journal de compilation de dev container",
"status.build_log_missing": "Fichier journal de compilation manquant ou illisible",
"status.cancel_nothing_in_flight": "Aucun rattachement de dev container en cours",
"status.attach_cancelled": "Rattachement de dev container annulé",
"cmd.show_build_logs": "Dev Container : Afficher les journaux de compilation",
"cmd.show_build_logs_desc": "Ouvrir le dernier journal de devcontainer up",
"cmd.cancel_attach": "Dev Container : Annuler le démarrage",
"cmd.cancel_attach_desc": "Interrompt un rattachement de dev container en cours",
"popup.failed_attach_title": "Echec de l'attachement au dev container",
"popup.failed_attach_message": "Echec de l'attachement au dev container : %{error}",
"popup.failed_attach_action_retry": "Reessayer",
"popup.failed_attach_action_show_logs": "Afficher les logs de build",
"popup.failed_attach_action_reopen_local": "Rouvrir en local",
"popup.failed_attach_action_dismiss": "Ignorer (ESC)",
"cmd.show_forwarded_ports_panel": "Dev Container : Afficher les ports redirigés",
"cmd.show_forwarded_ports_panel_desc": "Ouvrir un panneau listant les ports configures et les liaisons runtime du container",
"ports_panel.header": "Ports redirigés",
"ports_panel.col_configured": "Configuré",
"ports_panel.col_protocol": "Protocole",
"ports_panel.col_label": "Étiquette",
"ports_panel.col_binding": "Liaison runtime",
"ports_panel.no_ports": "Aucun port configure ou actif.",
"ports_panel.footer": "r : actualiser q/Echap : fermer",
"status.ports_panel_opened": "Panneau des ports redirigés ouvert",
"status.ports_panel_refreshed": "Panneau des ports redirigés actualisé"
},
"ja": {
"cmd.show_info": "Dev Container: 情報を表示",
"cmd.show_info_desc": "Dev Container設定を情報パネルに表示",
"cmd.open_config": "Dev Container: 設定を開く",
"cmd.open_config_desc": "devcontainer.jsonをエディタで開く",
"cmd.run_lifecycle": "Dev Container: ライフサイクルコマンドを実行",
"cmd.run_lifecycle_desc": "devcontainerのライフサイクルコマンドを選択して実行",
"cmd.show_features": "Dev Container: Featuresを表示",
"cmd.show_features_desc": "インストール済みのDev Container Featuresを一覧表示",
"cmd.show_ports": "Dev Container: ポートを表示",
"cmd.show_ports_desc": "設定済みのポート転送を表示",
"cmd.rebuild": "Dev Container: リビルド",
"cmd.rebuild_desc": "devcontainer CLIを使用してDev Containerをリビルド",
"cmd.attach": "Dev Container: アタッチ",
"cmd.attach_desc": "Dev Containerを起動し、ファイル操作とターミナルをコンテナ経由にルーティング",
"cmd.detach": "Dev Container: デタッチ",
"cmd.detach_desc": "Dev Containerへのルーティングを停止し、ローカル編集に戻る",
"status.detected": "Dev Container: %{name} (%{image}) - %{features}個のfeature, %{ports}個のポート",
"status.no_config": "devcontainer.jsonが見つかりません",
"status.panel_opened": "Dev Container情報パネルを開きました",
"status.panel_closed": "Dev Container情報パネルを閉じました",
"status.no_lifecycle": "ライフサイクルコマンドが定義されていません",
"status.no_features": "Featureが設定されていません",
"status.no_ports": "ポートが設定されていません",
"status.running": "%{name}を実行中...",
"status.running_sub": "%{name} (%{label})を実行中...",
"status.completed": "%{name}が正常に完了しました",
"status.failed": "%{name}が失敗しました（終了コード%{code}）",
"status.failed_sub": "%{name} (%{label})が失敗しました（終了コード%{code}）",
"status.cli_not_found": "devcontainer CLIが見つかりません。インストール: npm i -g @devcontainers/cli",
"status.copied_install": "コピーしました: %{cmd}",
"status.rebuilding": "Dev Containerをリビルド中...",
"status.rebuild_done": "Dev Containerのリビルドが完了しました",
"status.rebuild_failed": "リビルド失敗: %{error}",
"popup.cli_title": "Dev Container CLIが見つかりません",
"popup.cli_message": "リビルドにはdevcontainer CLIが必要です。インストールコマンドをコピーするか、閉じてください。",
"popup.activate_open_config": "設定を開く",
"popup.attach_title": "Dev Containerを検出しました",
"popup.attach_message": "Dev Container '%{name}' にアタッチしますか？エディタが再起動し、ファイル操作とターミナルがコンテナ経由で実行されます。",
"popup.attach_action_attach": "コンテナで再度開く",
"popup.attach_action_dismiss": "無視",
"prompt.run_lifecycle": "ライフサイクルコマンドを実行:",
"prompt.features": "Dev Container Features:",
"prompt.ports": "転送ポート:",
"panel.header": "Dev Container: %{name}",
"panel.section_image": "イメージ",
"panel.section_build": "ビルド",
"panel.section_compose": "Docker Compose",
"panel.section_features": "Features",
"panel.section_ports": "ポート",
"panel.section_env": "環境変数",
"panel.section_mounts": "マウント",
"panel.section_users": "ユーザー",
"panel.section_lifecycle": "ライフサイクルコマンド",
"panel.section_host_req": "ホスト要件",
"panel.footer": "Tab: 切替 Enter: 実行 Alt+r: ライフサイクル Alt+o: 設定 Alt+b: リビルド q: 閉じる",
"cmd.scaffold_config": "Dev Container: 設定を作成",
"cmd.scaffold_config_desc": "ワークスペースに最小の .devcontainer/devcontainer.json を作成",
"status.scaffold_already_exists": "Dev Container設定は既に存在します",
"status.scaffold_created": ".devcontainer/devcontainer.json を作成しました",
"status.scaffold_failed": "Dev Container設定の作成に失敗しました",
"cmd.show_logs": "Dev Container: ログを表示",
"cmd.show_logs_desc": "docker logs 経由で接続中のコンテナの最近のstdout/stderrを表示",
"status.logs_require_container": "ログ表示には接続中のDev Containerが必要です",
"status.logs_docker_missing": "ホストに docker CLI が見つかりません",
"status.logs_loading": "コンテナログを読み込み中...",
"status.logs_shown": "コンテナログを表示しました",
"status.logs_empty": "（コンテナは出力を生成していません）",
"indicator.phase_initialize": "初期化中",
"indicator.phase_build": "ビルド中",
"indicator.error_initialize": "initializeCommand が失敗しました",
"status.rebuild_parse_failed": "devcontainer up の出力を解析できませんでした",
"status.rebuild_missing_container_id": "containerId がありません",
"indicator.error_restart_recovery": "アタッチが完了しませんでした",
"status.build_log_prepare_failed": "ビルドログファイルを準備できませんでした",
"status.no_build_log": "Dev Container のビルドログがまだありません",
"status.build_log_missing": "ビルドログファイルが見つからないか読み取れません",
"status.cancel_nothing_in_flight": "進行中の Dev Container のアタッチはありません",
"status.attach_cancelled": "Dev Container のアタッチをキャンセルしました",
"cmd.show_build_logs": "Dev Container: ビルドログを表示",
"cmd.show_build_logs_desc": "最新の devcontainer up のビルドログを開く",
"cmd.cancel_attach": "Dev Container: 起動をキャンセル",
"cmd.cancel_attach_desc": "進行中の Dev Container のアタッチを中断する",
"popup.failed_attach_title": "Dev Container への接続に失敗しました",
"popup.failed_attach_message": "Dev Container への接続に失敗しました: %{error}",
"popup.failed_attach_action_retry": "再試行",
"popup.failed_attach_action_show_logs": "ビルドログを表示",
"popup.failed_attach_action_reopen_local": "ローカルで開きなおす",
"popup.failed_attach_action_dismiss": "閉じる (ESC)",
"cmd.show_forwarded_ports_panel": "Dev Container: 転送ポートを表示",
"cmd.show_forwarded_ports_panel_desc": "設定済みポートとコンテナ実行時のバインドを一覧表示するパネルを開く",
"ports_panel.header": "転送ポート",
"ports_panel.col_configured": "設定済み",
"ports_panel.col_protocol": "プロトコル",
"ports_panel.col_label": "ラベル",
"ports_panel.col_binding": "実行時バインド",
"ports_panel.no_ports": "表示するポートがありません。",
"ports_panel.footer": "r: 更新 q/Esc: 閉じる",
"status.ports_panel_opened": "転送ポートパネルを開きました",
"status.ports_panel_refreshed": "転送ポートパネルを更新しました"
},
"ko": {
"cmd.show_info": "Dev Container: 정보 표시",
"cmd.show_info_desc": "Dev Container 설정을 정보 패널에 표시",
"cmd.open_config": "Dev Container: 설정 열기",
"cmd.open_config_desc": "편집기에서 devcontainer.json 열기",
"cmd.run_lifecycle": "Dev Container: 라이프사이클 명령 실행",
"cmd.run_lifecycle_desc": "devcontainer 라이프사이클 명령을 선택하여 실행",
"cmd.show_features": "Dev Container: Features 표시",
"cmd.show_features_desc": "설치된 Dev Container Features 목록",
"cmd.show_ports": "Dev Container: 포트 표시",
"cmd.show_ports_desc": "구성된 포트 포워딩 표시",
"cmd.rebuild": "Dev Container: 재빌드",
"cmd.rebuild_desc": "devcontainer CLI를 사용하여 Dev Container 재빌드",
"cmd.attach": "Dev Container: 연결",
"cmd.attach_desc": "Dev Container를 시작하고 파일 작업과 터미널을 컨테이너로 라우팅",
"cmd.detach": "Dev Container: 연결 해제",
"cmd.detach_desc": "Dev Container 라우팅을 중지하고 로컬 편집으로 복귀",
"status.detected": "Dev Container: %{name} (%{image}) - %{features}개 feature, %{ports}개 포트",
"status.no_config": "devcontainer.json을 찾을 수 없습니다",
"status.panel_opened": "Dev Container 정보 패널이 열렸습니다",
"status.panel_closed": "Dev Container 정보 패널이 닫혔습니다",
"status.no_lifecycle": "라이프사이클 명령이 정의되지 않았습니다",
"status.no_features": "구성된 feature가 없습니다",
"status.no_ports": "구성된 포트가 없습니다",
"status.running": "%{name} 실행 중...",
"status.running_sub": "%{name} (%{label}) 실행 중...",
"status.completed": "%{name}이(가) 성공적으로 완료되었습니다",
"status.failed": "%{name} 실패 (종료 코드 %{code})",
"status.failed_sub": "%{name} (%{label}) 실패 (종료 코드 %{code})",
"status.cli_not_found": "devcontainer CLI를 찾을 수 없습니다. 설치: npm i -g @devcontainers/cli",
"status.copied_install": "복사됨: %{cmd}",
"status.rebuilding": "Dev Container 재빌드 중...",
"status.rebuild_done": "Dev Container 재빌드 완료",
"status.rebuild_failed": "재빌드 실패: %{error}",
"popup.cli_title": "Dev Container CLI를 찾을 수 없습니다",
"popup.cli_message": "재빌드에는 devcontainer CLI가 필요합니다. 설치 명령을 복사하거나 닫으세요.",
"popup.activate_open_config": "설정 열기",
"popup.attach_title": "Dev Container 감지됨",
"popup.attach_message": "Dev Container '%{name}'에 연결하시겠습니까? 파일 작업과 터미널이 컨테이너를 경유하도록 편집기가 다시 시작됩니다.",
"popup.attach_action_attach": "컨테이너에서 다시 열기",
"popup.attach_action_dismiss": "무시",
"prompt.run_lifecycle": "라이프사이클 명령 실행:",
"prompt.features": "Dev Container Features:",
"prompt.ports": "포워딩된 포트:",
"panel.header": "Dev Container: %{name}",
"panel.section_image": "이미지",
"panel.section_build": "빌드",
"panel.section_compose": "Docker Compose",
"panel.section_features": "Features",
"panel.section_ports": "포트",
"panel.section_env": "환경 변수",
"panel.section_mounts": "마운트",
"panel.section_users": "사용자",
"panel.section_lifecycle": "라이프사이클 명령",
"panel.section_host_req": "호스트 요구사항",
"panel.footer": "Tab: 전환 Enter: 실행 Alt+r: 라이프사이클 Alt+o: 설정 Alt+b: 재빌드 q: 닫기",
"cmd.scaffold_config": "Dev Container: 설정 만들기",
"cmd.scaffold_config_desc": "작업 공간에 최소한의 .devcontainer/devcontainer.json 생성",
"status.scaffold_already_exists": "Dev Container 설정이 이미 있습니다",
"status.scaffold_created": ".devcontainer/devcontainer.json 생성됨",
"status.scaffold_failed": "Dev Container 설정 생성 실패",
"cmd.show_logs": "Dev Container: 로그 표시",
"cmd.show_logs_desc": "docker logs를 통해 연결된 컨테이너의 최근 stdout/stderr 표시",
"status.logs_require_container": "로그 표시에는 연결된 Dev Container가 필요합니다",
"status.logs_docker_missing": "호스트에서 docker CLI를 찾을 수 없습니다",
"status.logs_loading": "컨테이너 로그 불러오는 중...",
"status.logs_shown": "컨테이너 로그 표시됨",
"status.logs_empty": "(컨테이너가 출력을 생성하지 않음)",
"indicator.phase_initialize": "초기화 중",
"indicator.phase_build": "빌드 중",
"indicator.error_initialize": "initializeCommand 실패",
"status.rebuild_parse_failed": "devcontainer up 출력을 파싱할 수 없음",
"status.rebuild_missing_container_id": "containerId 누락",
"indicator.error_restart_recovery": "연결이 완료되지 않음",
"status.build_log_prepare_failed": "빌드 로그 파일을 준비할 수 없습니다",
"status.no_build_log": "아직 Dev Container 빌드 로그가 없습니다",
"status.build_log_missing": "빌드 로그 파일이 없거나 읽을 수 없습니다",
"status.cancel_nothing_in_flight": "진행 중인 Dev Container 연결이 없습니다",
"status.attach_cancelled": "Dev Container 연결이 취소되었습니다",
"cmd.show_build_logs": "Dev Container: 빌드 로그 보기",
"cmd.show_build_logs_desc": "최근 devcontainer up의 빌드 로그를 엽니다",
"cmd.cancel_attach": "Dev Container: 시작 취소",
"cmd.cancel_attach_desc": "진행 중인 Dev Container 연결을 중단합니다",
"popup.failed_attach_title": "Dev Container 연결 실패",
"popup.failed_attach_message": "Dev Container 연결에 실패했습니다: %{error}",
"popup.failed_attach_action_retry": "다시 시도",
"popup.failed_attach_action_show_logs": "빌드 로그 보기",
"popup.failed_attach_action_reopen_local": "로컬로 다시 열기",
"popup.failed_attach_action_dismiss": "닫기 (ESC)",
"cmd.show_forwarded_ports_panel": "Dev Container: 포워딩 포트 보기",
"cmd.show_forwarded_ports_panel_desc": "구성된 포트와 런타임 바인딩을 나열하는 패널 열기",
"ports_panel.header": "포워딩 포트",
"ports_panel.col_configured": "구성됨",
"ports_panel.col_protocol": "프로토콜",
"ports_panel.col_label": "라벨",
"ports_panel.col_binding": "런타임 바인딩",
"ports_panel.no_ports": "표시할 포트가 없습니다.",
"ports_panel.footer": "r: 새로고침 q/Esc: 닫기",
"status.ports_panel_opened": "포워딩 포트 패널을 열었습니다",
"status.ports_panel_refreshed": "포워딩 포트 패널을 갱신했습니다"
},
"zh-CN": {
"cmd.show_info": "Dev Container: 显示信息",
"cmd.show_info_desc": "在信息面板中显示Dev Container配置",
"cmd.open_config": "Dev Container: 打开配置",
"cmd.open_config_desc": "在编辑器中打开devcontainer.json",
"cmd.run_lifecycle": "Dev Container: 运行生命周期命令",
"cmd.run_lifecycle_desc": "选择并运行devcontainer生命周期命令",
"cmd.show_features": "Dev Container: 显示Features",
"cmd.show_features_desc": "列出已安装的Dev Container Features",
"cmd.show_ports": "Dev Container: 显示端口",
"cmd.show_ports_desc": "显示已配置的端口转发",
"cmd.rebuild": "Dev Container: 重建",
"cmd.rebuild_desc": "使用devcontainer CLI重建Dev Container",
"cmd.attach": "Dev Container: 附加",
"cmd.attach_desc": "启动 Dev Container 并将文件操作和终端路由至其中",
"cmd.detach": "Dev Container: 分离",
"cmd.detach_desc": "停止通过 Dev Container 路由，返回本地编辑",
"status.detected": "Dev Container: %{name} (%{image}) - %{features}个feature, %{ports}个端口",
"status.no_config": "未找到devcontainer.json",
"status.panel_opened": "Dev Container信息面板已打开",
"status.panel_closed": "Dev Container信息面板已关闭",
"status.no_lifecycle": "未定义生命周期命令",
"status.no_features": "未配置feature",
"status.no_ports": "未配置端口",
"status.running": "正在运行%{name}...",
"status.running_sub": "正在运行%{name} (%{label})...",
"status.completed": "%{name}成功完成",
"status.failed": "%{name}失败（退出码%{code}）",
"status.failed_sub": "%{name} (%{label})失败（退出码%{code}）",
"status.cli_not_found": "未找到devcontainer CLI。安装命令: npm i -g @devcontainers/cli",
"status.copied_install": "已复制: %{cmd}",
"status.rebuilding": "正在重建Dev Container...",
"status.rebuild_done": "Dev Container重建完成",
"status.rebuild_failed": "重建失败: %{error}",
"popup.cli_title": "未找到Dev Container CLI",
"popup.cli_message": "重建需要devcontainer CLI。复制下面的安装命令或关闭。",
"popup.activate_open_config": "打开配置",
"popup.attach_title": "检测到 Dev Container",
"popup.attach_message": "附加到 Dev Container '%{name}'？编辑器将重启，使文件操作和终端经由该容器运行。",
"popup.attach_action_attach": "在容器中重新打开",
"popup.attach_action_dismiss": "忽略",
"prompt.run_lifecycle": "运行生命周期命令:",
"prompt.features": "Dev Container Features:",
"prompt.ports": "转发端口:",
"panel.header": "Dev Container: %{name}",
"panel.section_image": "镜像",
"panel.section_build": "构建",
"panel.section_compose": "Docker Compose",
"panel.section_features": "Features",
"panel.section_ports": "端口",
"panel.section_env": "环境变量",
"panel.section_mounts": "挂载",
"panel.section_users": "用户",
"panel.section_lifecycle": "生命周期命令",
"panel.section_host_req": "主机要求",
"panel.footer": "Tab: 切换 Enter: 执行 Alt+r: 生命周期 Alt+o: 打开 Alt+b: 重建 q: 关闭",
"cmd.scaffold_config": "Dev Container: 创建配置",
"cmd.scaffold_config_desc": "在工作区中创建最小的 .devcontainer/devcontainer.json",
"status.scaffold_already_exists": "Dev Container 配置已存在",
"status.scaffold_created": "已创建 .devcontainer/devcontainer.json",
"status.scaffold_failed": "创建 Dev Container 配置失败",
"cmd.show_logs": "Dev Container: 显示日志",
"cmd.show_logs_desc": "通过 docker logs 显示已附加容器的近期 stdout/stderr",
"status.logs_require_container": "显示日志需要已附加的 Dev Container",
"status.logs_docker_missing": "主机上未找到 docker CLI",
"status.logs_loading": "正在加载容器日志...",
"status.logs_shown": "已显示容器日志",
"status.logs_empty": "（容器没有产生输出）",
"indicator.phase_initialize": "正在初始化",
"indicator.phase_build": "正在构建",
"indicator.error_initialize": "initializeCommand 失败",
"status.rebuild_parse_failed": "无法解析 devcontainer up 的输出",
"status.rebuild_missing_container_id": "缺少 containerId",
"indicator.error_restart_recovery": "附加未完成",
"status.build_log_prepare_failed": "无法准备构建日志文件",
"status.no_build_log": "尚无 Dev Container 构建日志",
"status.build_log_missing": "构建日志文件缺失或无法读取",
"status.cancel_nothing_in_flight": "当前没有进行中的 Dev Container 连接",
"status.attach_cancelled": "已取消 Dev Container 连接",
"cmd.show_build_logs": "Dev Container: 显示构建日志",
"cmd.show_build_logs_desc": "打开最近一次 devcontainer up 的构建日志",
"cmd.cancel_attach": "Dev Container: 取消启动",
"cmd.cancel_attach_desc": "中止进行中的 Dev Container 连接",
"popup.failed_attach_title": "连接到开发容器失败",
"popup.failed_attach_message": "连接到开发容器失败: %{error}",
"popup.failed_attach_action_retry": "重试",
"popup.failed_attach_action_show_logs": "查看构建日志",
"popup.failed_attach_action_reopen_local": "在本地重新打开",
"popup.failed_attach_action_dismiss": "关闭 (ESC)",
"cmd.show_forwarded_ports_panel": "Dev Container: 显示转发端口",
"cmd.show_forwarded_ports_panel_desc": "打开面板列出已配置的端口以及容器运行时的绑定",
"ports_panel.header": "转发端口",
"ports_panel.col_configured": "已配置",
"ports_panel.col_protocol": "协议",
"ports_panel.col_label": "标签",
"ports_panel.col_binding": "运行时绑定",
"ports_panel.no_ports": "没有可显示的端口。",
"ports_panel.footer": "r: 刷新 q/Esc: 关闭",
"status.ports_panel_opened": "已打开转发端口面板",
"status.ports_panel_refreshed": "已刷新转发端口面板"
},
"it": {
"cmd.show_info": "Dev Container: Mostra info",
"cmd.show_info_desc": "Mostra la configurazione del dev container in un pannello informativo",
"cmd.open_config": "Dev Container: Apri configurazione",
"cmd.open_config_desc": "Apri devcontainer.json nell'editor",
"cmd.run_lifecycle": "Dev Container: Esegui comando lifecycle",
"cmd.run_lifecycle_desc": "Seleziona ed esegui un comando lifecycle del devcontainer",
"cmd.show_features": "Dev Container: Mostra features",
"cmd.show_features_desc": "Elenca le features installate del dev container",
"cmd.show_ports": "Dev Container: Mostra porte",
"cmd.show_ports_desc": "Mostra gli inoltri di porta configurati",
"cmd.rebuild": "Dev Container: Ricompila",
"cmd.rebuild_desc": "Ricompila il dev container usando il CLI devcontainer",
"cmd.attach": "Dev Container: Collega",
"cmd.attach_desc": "Avvia il dev container e instrada la modifica attraverso di esso",
"cmd.detach": "Dev Container: Scollega",
"cmd.detach_desc": "Interrompi l'instradamento tramite il dev container e torna alla modifica locale",
"status.detected": "Dev Container: %{name} (%{image}) - %{features} features, %{ports} porte",
"status.no_config": "Nessun devcontainer.json trovato",
"status.panel_opened": "Pannello info Dev Container aperto",
"status.panel_closed": "Pannello info Dev Container chiuso",
"status.no_lifecycle": "Nessun comando lifecycle definito",
"status.no_features": "Nessuna feature configurata",
"status.no_ports": "Nessuna porta configurata",
"status.running": "Esecuzione di %{name}...",
"status.running_sub": "Esecuzione di %{name} (%{label})...",
"status.completed": "%{name} completato con successo",
"status.failed": "%{name} fallito (codice di uscita %{code})",
"status.failed_sub": "%{name} (%{label}) fallito (codice di uscita %{code})",
"status.cli_not_found": "CLI devcontainer non trovato. Installa con: npm i -g @devcontainers/cli",
"status.copied_install": "Copiato: %{cmd}",
"status.rebuilding": "Ricompilazione del dev container...",
"status.rebuild_done": "Ricompilazione del dev container completata",
"status.rebuild_failed": "Ricompilazione fallita: %{error}",
"popup.cli_title": "CLI Dev Container non trovato",
"popup.cli_message": "Il CLI devcontainer e necessario per la ricompilazione. Copia il comando di installazione sotto o chiudi.",
"popup.activate_open_config": "Apri configurazione",
"popup.attach_title": "Dev container rilevato",
"popup.attach_message": "Collegare il dev container '%{name}'? L'editor si riavviera affinche le operazioni sui file e i terminali passino per il container.",
"popup.attach_action_attach": "Riapri nel container",
"popup.attach_action_dismiss": "Ignora",
"prompt.run_lifecycle": "Esegui comando lifecycle:",
"prompt.features": "Features Dev Container:",
"prompt.ports": "Porte inoltrate:",
"panel.header": "Dev Container: %{name}",
"panel.section_image": "Immagine",
"panel.section_build": "Build",
"panel.section_compose": "Docker Compose",
"panel.section_features": "Features",
"panel.section_ports": "Porte",
"panel.section_env": "Variabili d'ambiente",
"panel.section_mounts": "Mount",
"panel.section_users": "Utenti",
"panel.section_lifecycle": "Comandi Lifecycle",
"panel.section_host_req": "Requisiti host",
"panel.footer": "Tab: cicla Enter: attiva Alt+r: lifecycle Alt+o: apri Alt+b: ricompila q: chiudi",
"cmd.scaffold_config": "Dev Container: Crea configurazione",
"cmd.scaffold_config_desc": "Crea un .devcontainer/devcontainer.json minimale nel workspace",
"status.scaffold_already_exists": "La configurazione Dev Container esiste già",
"status.scaffold_created": ".devcontainer/devcontainer.json creato",
"status.scaffold_failed": "Creazione della configurazione Dev Container fallita",
"cmd.show_logs": "Dev Container: Mostra log",
"cmd.show_logs_desc": "Mostra lo stdout/stderr recente del container collegato tramite docker logs",
"status.logs_require_container": "Mostra log richiede un Dev Container collegato",
"status.logs_docker_missing": "CLI docker non trovato sull'host",
"status.logs_loading": "Caricamento log del container...",
"status.logs_shown": "Log del container mostrati",
"status.logs_empty": "(il container non ha prodotto output)",
"indicator.phase_initialize": "Inizializzazione",
"indicator.phase_build": "Compilazione",
"indicator.error_initialize": "initializeCommand fallito",
"status.rebuild_parse_failed": "impossibile analizzare l'output di devcontainer up",
"status.rebuild_missing_container_id": "containerId mancante",
"indicator.error_restart_recovery": "collegamento non completato",
"status.build_log_prepare_failed": "Impossibile preparare il file di log della build",
"status.no_build_log": "Nessun log di build del dev container disponibile",
"status.build_log_missing": "File di log della build mancante o illeggibile",
"status.cancel_nothing_in_flight": "Nessun collegamento al dev container in corso",
"status.attach_cancelled": "Collegamento al dev container annullato",
"cmd.show_build_logs": "Dev Container: Mostra log di build",
"cmd.show_build_logs_desc": "Apre il log dell'ultimo devcontainer up",
"cmd.cancel_attach": "Dev Container: Annulla avvio",
"cmd.cancel_attach_desc": "Interrompe un collegamento al dev container in corso",
"popup.failed_attach_title": "Connessione al dev container non riuscita",
"popup.failed_attach_message": "Connessione al dev container non riuscita: %{error}",
"popup.failed_attach_action_retry": "Riprova",
"popup.failed_attach_action_show_logs": "Mostra log di build",
"popup.failed_attach_action_reopen_local": "Riapri in locale",
"popup.failed_attach_action_dismiss": "Chiudi (ESC)",
"cmd.show_forwarded_ports_panel": "Dev Container: Mostra porte inoltrate",
"cmd.show_forwarded_ports_panel_desc": "Apri un pannello con le porte configurate e i binding a runtime del container",
"ports_panel.header": "Porte inoltrate",
"ports_panel.col_configured": "Configurata",
"ports_panel.col_protocol": "Protocollo",
"ports_panel.col_label": "Etichetta",
"ports_panel.col_binding": "Binding runtime",
"ports_panel.no_ports": "Nessuna porta configurata o attiva.",
"ports_panel.footer": "r: aggiorna q/Esc: chiudi",
"status.ports_panel_opened": "Pannello porte inoltrate aperto",
"status.ports_panel_refreshed": "Pannello porte inoltrate aggiornato"
},
"pt-BR": {
"cmd.show_info": "Dev Container: Mostrar informacoes",
"cmd.show_info_desc": "Mostrar a configuracao do dev container em um painel informativo",
"cmd.open_config": "Dev Container: Abrir configuracao",
"cmd.open_config_desc": "Abrir devcontainer.json no editor",
"cmd.run_lifecycle": "Dev Container: Executar comando lifecycle",
"cmd.run_lifecycle_desc": "Selecionar e executar um comando lifecycle do devcontainer",
"cmd.show_features": "Dev Container: Mostrar features",
"cmd.show_features_desc": "Listar features instaladas do dev container",
"cmd.show_ports": "Dev Container: Mostrar portas",
"cmd.show_ports_desc": "Mostrar encaminhamentos de porta configurados",
"cmd.rebuild": "Dev Container: Reconstruir",
"cmd.rebuild_desc": "Reconstruir o dev container usando o CLI devcontainer",
"cmd.attach": "Dev Container: Anexar",
"cmd.attach_desc": "Iniciar o dev container e rotear as operacoes de edicao por ele",
"cmd.detach": "Dev Container: Desanexar",
"cmd.detach_desc": "Parar de rotear pelo dev container e voltar a edicao local",
"status.detected": "Dev Container: %{name} (%{image}) - %{features} features, %{ports} portas",
"status.no_config": "devcontainer.json nao encontrado",
"status.panel_opened": "Painel de informacoes do Dev Container aberto",
"status.panel_closed": "Painel de informacoes do Dev Container fechado",
"status.no_lifecycle": "Nenhum comando lifecycle definido",
"status.no_features": "Nenhuma feature configurada",
"status.no_ports": "Nenhuma porta configurada",
"status.running": "Executando %{name}...",
"status.running_sub": "Executando %{name} (%{label})...",
"status.completed": "%{name} concluido com sucesso",
"status.failed": "%{name} falhou (codigo de saida %{code})",
"status.failed_sub": "%{name} (%{label}) falhou (codigo de saida %{code})",
"status.cli_not_found": "CLI devcontainer nao encontrado. Instale com: npm i -g @devcontainers/cli",
"status.copied_install": "Copiado: %{cmd}",
"status.rebuilding": "Reconstruindo dev container...",
"status.rebuild_done": "Reconstrucao do dev container concluida",
"status.rebuild_failed": "Reconstrucao falhou: %{error}",
"popup.cli_title": "CLI Dev Container nao encontrado",
"popup.cli_message": "O CLI devcontainer e necessario para reconstrucao. Copie o comando de instalacao abaixo ou descarte.",
"popup.activate_open_config": "Abrir configuracao",
"popup.attach_title": "Dev container detectado",
"popup.attach_message": "Anexar ao dev container '%{name}'? O editor sera reiniciado para que as operacoes de arquivo e terminais passem pelo container.",
"popup.attach_action_attach": "Reabrir no contêiner",
"popup.attach_action_dismiss": "Ignorar",
"prompt.run_lifecycle": "Executar comando lifecycle:",
"prompt.features": "Features do Dev Container:",
"prompt.ports": "Portas encaminhadas:",
"panel.header": "Dev Container: %{name}",
"panel.section_image": "Imagem",
"panel.section_build": "Build",
"panel.section_compose": "Docker Compose",
"panel.section_features": "Features",
"panel.section_ports": "Portas",
"panel.section_env": "Variaveis de ambiente",
"panel.section_mounts": "Montagens",
"panel.section_users": "Usuarios",
"panel.section_lifecycle": "Comandos Lifecycle",
"panel.section_host_req": "Requisitos do host",
"panel.footer": "Tab: ciclar Enter: ativar Alt+r: lifecycle Alt+o: abrir Alt+b: reconstruir q: fechar",
"cmd.scaffold_config": "Dev Container: Criar configuração",
"cmd.scaffold_config_desc": "Criar um .devcontainer/devcontainer.json mínimo no workspace",
"status.scaffold_already_exists": "Configuração do Dev Container já existe",
"status.scaffold_created": ".devcontainer/devcontainer.json criado",
"status.scaffold_failed": "Falha ao criar configuração do Dev Container",
"cmd.show_logs": "Dev Container: Mostrar logs",
"cmd.show_logs_desc": "Mostrar stdout/stderr recente do contêiner anexado via docker logs",
"status.logs_require_container": "Mostrar logs requer um Dev Container anexado",
"status.logs_docker_missing": "CLI docker não encontrado no host",
"status.logs_loading": "Carregando logs do contêiner...",
"status.logs_shown": "Logs do contêiner exibidos",
"status.logs_empty": "(o contêiner não produziu saída)",
"indicator.phase_initialize": "Inicializando",
"indicator.phase_build": "Construindo",
"indicator.error_initialize": "initializeCommand falhou",
"status.rebuild_parse_failed": "não foi possível analisar a saída do devcontainer up",
"status.rebuild_missing_container_id": "containerId ausente",
"indicator.error_restart_recovery": "conexão não concluída",
"status.build_log_prepare_failed": "Não foi possível preparar o arquivo de log de build",
"status.no_build_log": "Ainda não há log de build do dev container",
"status.build_log_missing": "Arquivo de log de build ausente ou ilegível",
"status.cancel_nothing_in_flight": "Nenhuma conexão de dev container em andamento",
"status.attach_cancelled": "Conexão de dev container cancelada",
"cmd.show_build_logs": "Dev Container: Mostrar logs de build",
"cmd.show_build_logs_desc": "Abre o log do último devcontainer up",
"cmd.cancel_attach": "Dev Container: Cancelar inicialização",
"cmd.cancel_attach_desc": "Aborta uma conexão de dev container em andamento",
"popup.failed_attach_title": "Falha ao anexar ao dev container",
"popup.failed_attach_message": "Falha ao anexar ao dev container: %{error}",
"popup.failed_attach_action_retry": "Tentar novamente",
"popup.failed_attach_action_show_logs": "Mostrar logs de build",
"popup.failed_attach_action_reopen_local": "Reabrir localmente",
"popup.failed_attach_action_dismiss": "Descartar (ESC)",
"cmd.show_forwarded_ports_panel": "Dev Container: Mostrar portas encaminhadas",
"cmd.show_forwarded_ports_panel_desc": "Abrir painel listando portas configuradas e vínculos em tempo de execução do container",
"ports_panel.header": "Portas encaminhadas",
"ports_panel.col_configured": "Configurada",
"ports_panel.col_protocol": "Protocolo",
"ports_panel.col_label": "Rótulo",
"ports_panel.col_binding": "Vínculo em execução",
"ports_panel.no_ports": "Nenhuma porta configurada ou em execução.",
"ports_panel.footer": "r: atualizar q/Esc: fechar",
"status.ports_panel_opened": "Painel de portas encaminhadas aberto",
"status.ports_panel_refreshed": "Painel de portas encaminhadas atualizado"
},
"ru": {
"cmd.show_info": "Dev Container: Показать информацию",
"cmd.show_info_desc": "Показать конфигурацию dev container в информационной панели",
"cmd.open_config": "Dev Container: Открыть конфигурацию",
"cmd.open_config_desc": "Открыть devcontainer.json в редакторе",
"cmd.run_lifecycle": "Dev Container: Выполнить lifecycle-команду",
"cmd.run_lifecycle_desc": "Выбрать и выполнить lifecycle-команду devcontainer",
"cmd.show_features": "Dev Container: Показать features",
"cmd.show_features_desc": "Показать установленные features dev container",
"cmd.show_ports": "Dev Container: Показать порты",
"cmd.show_ports_desc": "Показать настроенные перенаправления портов",
"cmd.rebuild": "Dev Container: Пересобрать",
"cmd.rebuild_desc": "Пересобрать dev container с помощью devcontainer CLI",
"cmd.attach": "Dev Container: Подключить",
"cmd.attach_desc": "Запустить dev container и направить операции редактирования через него",
"cmd.detach": "Dev Container: Отключить",
"cmd.detach_desc": "Прекратить маршрутизацию через dev container и вернуться к локальному редактированию",
"status.detected": "Dev Container: %{name} (%{image}) - %{features} features, %{ports} портов",
"status.no_config": "devcontainer.json не найден",
"status.panel_opened": "Информационная панель Dev Container открыта",
"status.panel_closed": "Информационная панель Dev Container закрыта",
"status.no_lifecycle": "Lifecycle-команды не определены",
"status.no_features": "Features не настроены",
"status.no_ports": "Порты не настроены",
"status.running": "Выполняется %{name}...",
"status.running_sub": "Выполняется %{name} (%{label})...",
"status.completed": "%{name} успешно завершено",
"status.failed": "%{name} завершилось с ошибкой (код выхода %{code})",
"status.failed_sub": "%{name} (%{label}) завершилось с ошибкой (код выхода %{code})",
"status.cli_not_found": "devcontainer CLI не найден. Установите: npm i -g @devcontainers/cli",
"status.copied_install": "Скопировано: %{cmd}",
"status.rebuilding": "Пересборка dev container...",
"status.rebuild_done": "Пересборка dev container завершена",
"status.rebuild_failed": "Пересборка не удалась: %{error}",
"popup.cli_title": "devcontainer CLI не найден",
"popup.cli_message": "devcontainer CLI требуется для пересборки. Скопируйте команду установки ниже или закройте.",
"popup.activate_open_config": "Открыть конфигурацию",
"popup.attach_title": "Обнаружен dev container",
"popup.attach_message": "Подключиться к dev container '%{name}'? Редактор перезапустится, чтобы файловые операции и терминалы шли через контейнер.",
"popup.attach_action_attach": "Открыть заново в контейнере",
"popup.attach_action_dismiss": "Игнорировать",
"prompt.run_lifecycle": "Выполнить lifecycle-команду:",
"prompt.features": "Features Dev Container:",
"prompt.ports": "Перенаправленные порты:",
"panel.header": "Dev Container: %{name}",
"panel.section_image": "Образ",
"panel.section_build": "Сборка",
"panel.section_compose": "Docker Compose",
"panel.section_features": "Features",
"panel.section_ports": "Порты",
"panel.section_env": "Переменные окружения",
"panel.section_mounts": "Монтирования",
"panel.section_users": "Пользователи",
"panel.section_lifecycle": "Lifecycle-команды",
"panel.section_host_req": "Требования к хосту",
"panel.footer": "Tab: цикл Enter: активировать Alt+r: lifecycle Alt+o: открыть Alt+b: пересобрать q: закрыть",
"cmd.scaffold_config": "Dev Container: Создать конфигурацию",
"cmd.scaffold_config_desc": "Создать минимальный .devcontainer/devcontainer.json в рабочей области",
"status.scaffold_already_exists": "Конфигурация Dev Container уже существует",
"status.scaffold_created": ".devcontainer/devcontainer.json создан",
"status.scaffold_failed": "Не удалось создать конфигурацию Dev Container",
"cmd.show_logs": "Dev Container: Показать логи",
"cmd.show_logs_desc": "Показать последние stdout/stderr подключённого контейнера через docker logs",
"status.logs_require_container": "Для показа логов требуется подключённый Dev Container",
"status.logs_docker_missing": "CLI docker не найден на хосте",
"status.logs_loading": "Загрузка логов контейнера...",
"status.logs_shown": "Логи контейнера показаны",
"status.logs_empty": "(контейнер не произвёл вывода)",
"indicator.phase_initialize": "Инициализация",
"indicator.phase_build": "Сборка",
"indicator.error_initialize": "initializeCommand завершился с ошибкой",
"status.rebuild_parse_failed": "не удалось разобрать вывод devcontainer up",
"status.rebuild_missing_container_id": "отсутствует containerId",
"indicator.error_restart_recovery": "подключение не завершилось",
"status.build_log_prepare_failed": "Не удалось подготовить файл журнала сборки",
"status.no_build_log": "Журнал сборки dev container пока отсутствует",
"status.build_log_missing": "Файл журнала сборки отсутствует или не читается",
"status.cancel_nothing_in_flight": "Нет выполняемого подключения dev container",
"status.attach_cancelled": "Подключение dev container отменено",
"cmd.show_build_logs": "Dev Container: Показать журнал сборки",
"cmd.show_build_logs_desc": "Открывает журнал последнего devcontainer up",
"cmd.cancel_attach": "Dev Container: Отменить запуск",
"cmd.cancel_attach_desc": "Прерывает выполняющееся подключение dev container",
"popup.failed_attach_title": "Ошибка подключения к dev container",
"popup.failed_attach_message": "Ошибка подключения к dev container: %{error}",
"popup.failed_attach_action_retry": "Повторить",
"popup.failed_attach_action_show_logs": "Показать логи сборки",
"popup.failed_attach_action_reopen_local": "Открыть локально",
"popup.failed_attach_action_dismiss": "Закрыть (ESC)",
"cmd.show_forwarded_ports_panel": "Dev Container: Показать перенаправленные порты",
"cmd.show_forwarded_ports_panel_desc": "Открыть панель со списком настроенных и активных портов контейнера",
"ports_panel.header": "Перенаправленные порты",
"ports_panel.col_configured": "Настроено",
"ports_panel.col_protocol": "Протокол",
"ports_panel.col_label": "Метка",
"ports_panel.col_binding": "Активная привязка",
"ports_panel.no_ports": "Нет портов для отображения.",
"ports_panel.footer": "r: обновить q/Esc: закрыть",
"status.ports_panel_opened": "Панель перенаправленных портов открыта",
"status.ports_panel_refreshed": "Панель перенаправленных портов обновлена"
},
"th": {
"cmd.show_info": "Dev Container: แสดงข้อมูล",
"cmd.show_info_desc": "แสดงการตั้งค่า dev container ในแผงข้อมูล",
"cmd.open_config": "Dev Container: เปิดการตั้งค่า",
"cmd.open_config_desc": "เปิด devcontainer.json ในตัวแก้ไข",
"cmd.run_lifecycle": "Dev Container: เรียกใช้คำสั่ง lifecycle",
"cmd.run_lifecycle_desc": "เลือกและเรียกใช้คำสั่ง lifecycle ของ devcontainer",
"cmd.show_features": "Dev Container: แสดง features",
"cmd.show_features_desc": "แสดงรายการ features ของ dev container ที่ติดตั้งแล้ว",
"cmd.show_ports": "Dev Container: แสดงพอร์ต",
"cmd.show_ports_desc": "แสดงการส่งต่อพอร์ตที่กำหนดค่าไว้",
"cmd.rebuild": "Dev Container: สร้างใหม่",
"cmd.rebuild_desc": "สร้าง dev container ใหม่โดยใช้ devcontainer CLI",
"cmd.attach": "Dev Container: เชื่อมต่อ",
"cmd.attach_desc": "เริ่มต้น dev container และกำหนดเส้นทางการแก้ไขผ่านคอนเทนเนอร์",
"cmd.detach": "Dev Container: ยกเลิกการเชื่อมต่อ",
"cmd.detach_desc": "หยุดกำหนดเส้นทางผ่าน dev container และกลับสู่การแก้ไขในเครื่อง",
"status.detected": "Dev Container: %{name} (%{image}) - %{features} features, %{ports} พอร์ต",
"status.no_config": "ไม่พบ devcontainer.json",
"status.panel_opened": "เปิดแผงข้อมูล Dev Container แล้ว",
"status.panel_closed": "ปิดแผงข้อมูล Dev Container แล้ว",
"status.no_lifecycle": "ไม่ได้กำหนดคำสั่ง lifecycle",
"status.no_features": "ไม่ได้กำหนดค่า features",
"status.no_ports": "ไม่ได้กำหนดค่าพอร์ต",
"status.running": "กำลังเรียกใช้ %{name}...",
"status.running_sub": "กำลังเรียกใช้ %{name} (%{label})...",
"status.completed": "%{name} เสร็จสมบูรณ์",
"status.failed": "%{name} ล้มเหลว (รหัสออก %{code})",
"status.failed_sub": "%{name} (%{label}) ล้มเหลว (รหัสออก %{code})",
"status.cli_not_found": "ไม่พบ devcontainer CLI ติดตั้งด้วย: npm i -g @devcontainers/cli",
"status.copied_install": "คัดลอกแล้ว: %{cmd}",
"status.rebuilding": "กำลังสร้าง dev container ใหม่...",
"status.rebuild_done": "การสร้าง dev container ใหม่เสร็จสมบูรณ์",
"status.rebuild_failed": "การสร้างใหม่ล้มเหลว: %{error}",
"popup.cli_title": "ไม่พบ Dev Container CLI",
"popup.cli_message": "จำเป็นต้องใช้ devcontainer CLI สำหรับการสร้างใหม่ คัดลอกคำสั่งติดตั้งด้านล่างหรือปิด",
"popup.activate_open_config": "เปิดการตั้งค่า",
"popup.attach_title": "พบ Dev Container",
"popup.attach_message": "เชื่อมต่อกับ dev container '%{name}' หรือไม่? ตัวแก้ไขจะรีสตาร์ทเพื่อให้ I/O ของไฟล์และเทอร์มินัลผ่านคอนเทนเนอร์",
"popup.attach_action_attach": "เปิดในคอนเทนเนอร์อีกครั้ง",
"popup.attach_action_dismiss": "ละเว้น",
"prompt.run_lifecycle": "เรียกใช้คำสั่ง lifecycle:",
"prompt.features": "Features Dev Container:",
"prompt.ports": "พอร์ตที่ส่งต่อ:",
"panel.header": "Dev Container: %{name}",
"panel.section_image": "อิมเมจ",
"panel.section_build": "บิลด์",
"panel.section_compose": "Docker Compose",
"panel.section_features": "Features",
"panel.section_ports": "พอร์ต",
"panel.section_env": "ตัวแปรสภาพแวดล้อม",
"panel.section_mounts": "การเมานต์",
"panel.section_users": "ผู้ใช้",
"panel.section_lifecycle": "คำสั่ง Lifecycle",
"panel.section_host_req": "ข้อกำหนดโฮสต์",
"panel.footer": "Tab: สลับ Enter: เปิดใช้งาน Alt+r: lifecycle Alt+o: เปิด Alt+b: สร้างใหม่ q: ปิด",
"cmd.scaffold_config": "Dev Container: สร้างการตั้งค่า",
"cmd.scaffold_config_desc": "สร้าง .devcontainer/devcontainer.json ขั้นต่ำในเวิร์กสเปซ",
"status.scaffold_already_exists": "การตั้งค่า Dev Container มีอยู่แล้ว",
"status.scaffold_created": "สร้าง .devcontainer/devcontainer.json แล้ว",
"status.scaffold_failed": "สร้างการตั้งค่า Dev Container ไม่สำเร็จ",
"cmd.show_logs": "Dev Container: แสดงล็อก",
"cmd.show_logs_desc": "แสดง stdout/stderr ล่าสุดของคอนเทนเนอร์ที่แนบผ่าน docker logs",
"status.logs_require_container": "การแสดงล็อกต้องการ Dev Container ที่แนบอยู่",
"status.logs_docker_missing": "ไม่พบ CLI docker บนโฮสต์",
"status.logs_loading": "กำลังโหลดล็อกคอนเทนเนอร์...",
"status.logs_shown": "แสดงล็อกคอนเทนเนอร์แล้ว",
"status.logs_empty": "(คอนเทนเนอร์ไม่ได้สร้างเอาต์พุต)",
"indicator.phase_initialize": "กำลังเริ่มต้น",
"indicator.phase_build": "กำลังสร้าง",
"indicator.error_initialize": "initializeCommand ล้มเหลว",
"status.rebuild_parse_failed": "ไม่สามารถแยกวิเคราะห์เอาต์พุตของ devcontainer up",
"status.rebuild_missing_container_id": "ขาด containerId",
"indicator.error_restart_recovery": "การเชื่อมต่อไม่สำเร็จ",
"status.build_log_prepare_failed": "ไม่สามารถเตรียมไฟล์บันทึกการสร้าง",
"status.no_build_log": "ยังไม่มีบันทึกการสร้าง Dev Container",
"status.build_log_missing": "ไฟล์บันทึกการสร้างหายไปหรืออ่านไม่ได้",
"status.cancel_nothing_in_flight": "ไม่มีการเชื่อมต่อ Dev Container ที่กำลังดำเนินการ",
"status.attach_cancelled": "ยกเลิกการเชื่อมต่อ Dev Container แล้ว",
"cmd.show_build_logs": "Dev Container: แสดงบันทึกการสร้าง",
"cmd.show_build_logs_desc": "เปิดบันทึกการสร้าง devcontainer up ล่าสุด",
"cmd.cancel_attach": "Dev Container: ยกเลิกการเริ่มต้น",
"cmd.cancel_attach_desc": "ยกเลิกการเชื่อมต่อ Dev Container ที่กำลังดำเนินการ",
"popup.failed_attach_title": "เชื่อมต่อ Dev Container ไม่สำเร็จ",
"popup.failed_attach_message": "เชื่อมต่อ Dev Container ไม่สำเร็จ: %{error}",
"popup.failed_attach_action_retry": "ลองอีกครั้ง",
"popup.failed_attach_action_show_logs": "แสดงบันทึกการสร้าง",
"popup.failed_attach_action_reopen_local": "เปิดใหม่ในเครื่อง",
"popup.failed_attach_action_dismiss": "ปิด (ESC)",
"cmd.show_forwarded_ports_panel": "Dev Container: แสดงพอร์ตที่ส่งต่อ",
"cmd.show_forwarded_ports_panel_desc": "เปิดแผงแสดงพอร์ตที่ตั้งค่าและผูกในเวลาทำงานของคอนเทนเนอร์",
"ports_panel.header": "พอร์ตที่ส่งต่อ",
"ports_panel.col_configured": "ตั้งค่าไว้",
"ports_panel.col_protocol": "โปรโตคอล",
"ports_panel.col_label": "ป้ายชื่อ",
"ports_panel.col_binding": "การผูกขณะทำงาน",
"ports_panel.no_ports": "ไม่มีพอร์ตให้แสดง",
"ports_panel.footer": "r: รีเฟรช q/Esc: ปิด",
"status.ports_panel_opened": "เปิดแผงพอร์ตที่ส่งต่อแล้ว",
"status.ports_panel_refreshed": "รีเฟรชแผงพอร์ตที่ส่งต่อแล้ว"
},
"uk": {
"cmd.show_info": "Dev Container: Показати інформацію",
"cmd.show_info_desc": "Показати конфігурацію dev container в інформаційній панелі",
"cmd.open_config": "Dev Container: Відкрити конфігурацію",
"cmd.open_config_desc": "Відкрити devcontainer.json у редакторі",
"cmd.run_lifecycle": "Dev Container: Виконати lifecycle-команду",
"cmd.run_lifecycle_desc": "Обрати та виконати lifecycle-команду devcontainer",
"cmd.show_features": "Dev Container: Показати features",
"cmd.show_features_desc": "Показати встановлені features dev container",
"cmd.show_ports": "Dev Container: Показати порти",
"cmd.show_ports_desc": "Показати налаштовані перенаправлення портів",
"cmd.rebuild": "Dev Container: Перебудувати",
"cmd.rebuild_desc": "Перебудувати dev container за допомогою devcontainer CLI",
"cmd.attach": "Dev Container: Підключити",
"cmd.attach_desc": "Запустити dev container і спрямувати операції редагування через нього",
"cmd.detach": "Dev Container: Від'єднати",
"cmd.detach_desc": "Припинити маршрутизацію через dev container і повернутися до локального редагування",
"status.detected": "Dev Container: %{name} (%{image}) - %{features} features, %{ports} портів",
"status.no_config": "devcontainer.json не знайдено",
"status.panel_opened": "Інформаційна панель Dev Container відкрита",
"status.panel_closed": "Інформаційна панель Dev Container закрита",
"status.no_lifecycle": "Lifecycle-команди не визначені",
"status.no_features": "Features не налаштовані",
"status.no_ports": "Порти не налаштовані",
"status.running": "Виконується %{name}...",
"status.running_sub": "Виконується %{name} (%{label})...",
"status.completed": "%{name} успішно завершено",
"status.failed": "%{name} завершилося з помилкою (код виходу %{code})",
"status.failed_sub": "%{name} (%{label}) завершилося з помилкою (код виходу %{code})",
"status.cli_not_found": "devcontainer CLI не знайдено. Встановіть: npm i -g @devcontainers/cli",
"status.copied_install": "Скопійовано: %{cmd}",
"status.rebuilding": "Перебудова dev container...",
"status.rebuild_done": "Перебудова dev container завершена",
"status.rebuild_failed": "Перебудова не вдалася: %{error}",
"popup.cli_title": "devcontainer CLI не знайдено",
"popup.cli_message": "devcontainer CLI потрібен для перебудови. Скопіюйте команду встановлення нижче або закрийте.",
"popup.activate_open_config": "Відкрити конфігурацію",
"popup.attach_title": "Виявлено dev container",
"popup.attach_message": "Підключитися до dev container '%{name}'? Редактор перезапуститься, щоб файлові операції та термінали проходили через контейнер.",
"popup.attach_action_attach": "Відкрити знову в контейнері",
"popup.attach_action_dismiss": "Ігнорувати",
"prompt.run_lifecycle": "Виконати lifecycle-команду:",
"prompt.features": "Features Dev Container:",
"prompt.ports": "Перенаправлені порти:",
"panel.header": "Dev Container: %{name}",
"panel.section_image": "Образ",
"panel.section_build": "Збірка",
"panel.section_compose": "Docker Compose",
"panel.section_features": "Features",
"panel.section_ports": "Порти",
"panel.section_env": "Змінні середовища",
"panel.section_mounts": "Монтування",
"panel.section_users": "Користувачі",
"panel.section_lifecycle": "Lifecycle-команди",
"panel.section_host_req": "Вимоги до хоста",
"panel.footer": "Tab: цикл Enter: активувати Alt+r: lifecycle Alt+o: відкрити Alt+b: перебудувати q: закрити",
"cmd.scaffold_config": "Dev Container: Створити конфігурацію",
"cmd.scaffold_config_desc": "Створити мінімальний .devcontainer/devcontainer.json у робочій області",
"status.scaffold_already_exists": "Конфігурація Dev Container вже існує",
"status.scaffold_created": ".devcontainer/devcontainer.json створено",
"status.scaffold_failed": "Не вдалося створити конфігурацію Dev Container",
"cmd.show_logs": "Dev Container: Показати логи",
"cmd.show_logs_desc": "Показати останні stdout/stderr підключеного контейнера через docker logs",
"status.logs_require_container": "Для показу логів потрібен підключений Dev Container",
"status.logs_docker_missing": "CLI docker не знайдено на хості",
"status.logs_loading": "Завантаження логів контейнера...",
"status.logs_shown": "Логи контейнера показано",
"status.logs_empty": "(контейнер не створив вивід)",
"indicator.phase_initialize": "Ініціалізація",
"indicator.phase_build": "Збирання",
"indicator.error_initialize": "initializeCommand завершився з помилкою",
"status.rebuild_parse_failed": "не вдалося розібрати вивід devcontainer up",
"status.rebuild_missing_container_id": "відсутній containerId",
"indicator.error_restart_recovery": "підключення не завершилося",
"status.build_log_prepare_failed": "Не вдалося підготувати файл журналу збирання",
"status.no_build_log": "Журнал збирання dev container ще відсутній",
"status.build_log_missing": "Файл журналу збирання відсутній або не читається",
"status.cancel_nothing_in_flight": "Немає поточного підключення dev container",
"status.attach_cancelled": "Підключення dev container скасовано",
"cmd.show_build_logs": "Dev Container: Показати журнал збирання",
"cmd.show_build_logs_desc": "Відкриває журнал останнього devcontainer up",
"cmd.cancel_attach": "Dev Container: Скасувати запуск",
"cmd.cancel_attach_desc": "Перериває поточне підключення dev container",
"popup.failed_attach_title": "Помилка підключення до dev container",
"popup.failed_attach_message": "Помилка підключення до dev container: %{error}",
"popup.failed_attach_action_retry": "Повторити",
"popup.failed_attach_action_show_logs": "Показати логи збирання",
"popup.failed_attach_action_reopen_local": "Відкрити локально",
"popup.failed_attach_action_dismiss": "Закрити (ESC)",
"cmd.show_forwarded_ports_panel": "Dev Container: Показати перенаправлені порти",
"cmd.show_forwarded_ports_panel_desc": "Відкрити панель зі списком налаштованих портів і прив'язок під час виконання",
"ports_panel.header": "Перенаправлені порти",
"ports_panel.col_configured": "Налаштовано",
"ports_panel.col_protocol": "Протокол",
"ports_panel.col_label": "Мітка",
"ports_panel.col_binding": "Прив'язка виконання",
"ports_panel.no_ports": "Немає портів для показу.",
"ports_panel.footer": "r: оновити q/Esc: закрити",
"status.ports_panel_opened": "Панель перенаправлених портів відкрито",
"status.ports_panel_refreshed": "Панель перенаправлених портів оновлено"
},
"vi": {
"cmd.show_info": "Dev Container: Hiển thị thông tin",
"cmd.show_info_desc": "Hiển thị cấu hình dev container trong bảng thông tin",
"cmd.open_config": "Dev Container: Mở cấu hình",
"cmd.open_config_desc": "Mở devcontainer.json trong trình soạn thảo",
"cmd.run_lifecycle": "Dev Container: Chạy lệnh lifecycle",
"cmd.run_lifecycle_desc": "Chọn và chạy một lệnh lifecycle của devcontainer",
"cmd.show_features": "Dev Container: Hiển thị features",
"cmd.show_features_desc": "Liệt kê các features đã cài đặt của dev container",
"cmd.show_ports": "Dev Container: Hiển thị cổng",
"cmd.show_ports_desc": "Hiển thị các chuyển tiếp cổng đã cấu hình",
"cmd.rebuild": "Dev Container: Xây dựng lại",
"cmd.rebuild_desc": "Xây dựng lại dev container bằng devcontainer CLI",
"cmd.attach": "Dev Container: Gắn",
"cmd.attach_desc": "Khởi động dev container và định tuyến thao tác chỉnh sửa qua nó",
"cmd.detach": "Dev Container: Tháo",
"cmd.detach_desc": "Dừng định tuyến qua dev container và quay lại chỉnh sửa cục bộ",
"status.detected": "Dev Container: %{name} (%{image}) - %{features} features, %{ports} cổng",
"status.no_config": "Không tìm thấy devcontainer.json",
"status.panel_opened": "Đã mở bảng thông tin Dev Container",
"status.panel_closed": "Đã đóng bảng thông tin Dev Container",
"status.no_lifecycle": "Không có lệnh lifecycle nào được định nghĩa",
"status.no_features": "Không có feature nào được cấu hình",
"status.no_ports": "Không có cổng nào được cấu hình",
"status.running": "Đang chạy %{name}...",
"status.running_sub": "Đang chạy %{name} (%{label})...",
"status.completed": "%{name} đã hoàn thành thành công",
"status.failed": "%{name} thất bại (mã thoát %{code})",
"status.failed_sub": "%{name} (%{label}) thất bại (mã thoát %{code})",
"status.cli_not_found": "Không tìm thấy devcontainer CLI. Cài đặt bằng: npm i -g @devcontainers/cli",
"status.copied_install": "Đã sao chép: %{cmd}",
"status.rebuilding": "Đang xây dựng lại dev container...",
"status.rebuild_done": "Xây dựng lại dev container hoàn tất",
"status.rebuild_failed": "Xây dựng lại thất bại: %{error}",
"popup.cli_title": "Không tìm thấy Dev Container CLI",
"popup.cli_message": "Cần devcontainer CLI để xây dựng lại. Sao chép lệnh cài đặt bên dưới hoặc bỏ qua.",
"popup.activate_open_config": "Mở cấu hình",
"popup.attach_title": "Đã phát hiện dev container",
"popup.attach_message": "Gắn vào dev container '%{name}'? Trình soạn thảo sẽ khởi động lại để I/O tệp và terminal đi qua container.",
"popup.attach_action_attach": "Mở lại trong container",
"popup.attach_action_dismiss": "Bỏ qua",
"prompt.run_lifecycle": "Chạy lệnh lifecycle:",
"prompt.features": "Features Dev Container:",
"prompt.ports": "Cổng được chuyển tiếp:",
"panel.header": "Dev Container: %{name}",
"panel.section_image": "Ảnh",
"panel.section_build": "Xây dựng",
"panel.section_compose": "Docker Compose",
"panel.section_features": "Features",
"panel.section_ports": "Cổng",
"panel.section_env": "Biến môi trường",
"panel.section_mounts": "Gắn kết",
"panel.section_users": "Người dùng",
"panel.section_lifecycle": "Lệnh Lifecycle",
"panel.section_host_req": "Yêu cầu máy chủ",
"panel.footer": "Tab: chuyển Enter: kích hoạt Alt+r: lifecycle Alt+o: mở Alt+b: xây dựng lại q: đóng",
"cmd.scaffold_config": "Dev Container: Tạo cấu hình",
"cmd.scaffold_config_desc": "Tạo .devcontainer/devcontainer.json tối thiểu trong workspace",
"status.scaffold_already_exists": "Cấu hình Dev Container đã tồn tại",
"status.scaffold_created": "Đã tạo .devcontainer/devcontainer.json",
"status.scaffold_failed": "Tạo cấu hình Dev Container thất bại",
"cmd.show_logs": "Dev Container: Hiện nhật ký",
"cmd.show_logs_desc": "Hiện stdout/stderr gần đây của container được gắn qua docker logs",
"status.logs_require_container": "Hiện nhật ký cần một Dev Container được gắn",
"status.logs_docker_missing": "CLI docker không tìm thấy trên host",
"status.logs_loading": "Đang tải nhật ký container...",
"status.logs_shown": "Đã hiện nhật ký container",
"status.logs_empty": "(container chưa tạo đầu ra)",
"indicator.phase_initialize": "Đang khởi tạo",
"indicator.phase_build": "Đang xây dựng",
"indicator.error_initialize": "initializeCommand thất bại",
"status.rebuild_parse_failed": "không thể phân tích đầu ra của devcontainer up",
"status.rebuild_missing_container_id": "thiếu containerId",
"indicator.error_restart_recovery": "gắn kết không hoàn tất",
"status.build_log_prepare_failed": "Không thể chuẩn bị tệp nhật ký xây dựng",
"status.no_build_log": "Chưa có nhật ký xây dựng dev container",
"status.build_log_missing": "Tệp nhật ký xây dựng bị thiếu hoặc không đọc được",
"status.cancel_nothing_in_flight": "Không có kết nối dev container đang chạy",
"status.attach_cancelled": "Đã hủy kết nối dev container",
"cmd.show_build_logs": "Dev Container: Hiện nhật ký xây dựng",
"cmd.show_build_logs_desc": "Mở nhật ký devcontainer up gần nhất",
"cmd.cancel_attach": "Dev Container: Hủy khởi động",
"cmd.cancel_attach_desc": "Hủy kết nối dev container đang chạy",
"popup.failed_attach_title": "Kết nối dev container thất bại",
"popup.failed_attach_message": "Kết nối dev container thất bại: %{error}",
"popup.failed_attach_action_retry": "Thử lại",
"popup.failed_attach_action_show_logs": "Xem log build",
"popup.failed_attach_action_reopen_local": "Mở lại cục bộ",
"popup.failed_attach_action_dismiss": "Đóng (ESC)",
"cmd.show_forwarded_ports_panel": "Dev Container: Hiện cổng đã chuyển tiếp",
"cmd.show_forwarded_ports_panel_desc": "Mở bảng liệt kê cổng đã cấu hình và liên kết runtime của container",
"ports_panel.header": "Cổng đã chuyển tiếp",
"ports_panel.col_configured": "Đã cấu hình",
"ports_panel.col_protocol": "Giao thức",
"ports_panel.col_label": "Nhãn",
"ports_panel.col_binding": "Liên kết runtime",
"ports_panel.no_ports": "Không có cổng nào để hiển thị.",
"ports_panel.footer": "r: làm mới q/Esc: đóng",
"status.ports_panel_opened": "Đã mở bảng cổng chuyển tiếp",
"status.ports_panel_refreshed": "Đã làm mới bảng cổng chuyển tiếp"
}
}