fontcull-skrifa 0.39.2

//! TrueType style outline to path conversion.

use super::pen::{OutlinePen, PathStyle};
use core::fmt;
use raw::{
    tables::glyf::{PointCoord, PointFlags},
    types::Point,
};

/// Errors that can occur when converting an outline to a path.
#[derive(Clone, Debug)]
pub enum ToPathError {
    /// Contour end point at this index was less than its preceding end point.
    ContourOrder(usize),
    /// Expected a quadratic off-curve point at this index.
    ExpectedQuad(usize),
    /// Expected a quadratic off-curve or on-curve point at this index.
    ExpectedQuadOrOnCurve(usize),
    /// Expected a cubic off-curve point at this index.
    ExpectedCubic(usize),
    /// Expected number of points to == number of flags
    PointFlagMismatch { num_points: usize, num_flags: usize },
}

impl fmt::Display for ToPathError {
    fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result {
        match self {
            Self::ContourOrder(ix) => write!(
                f,
                "Contour end point at index {ix} was less than preceding end point"
            ),
            Self::ExpectedQuad(ix) => write!(f, "Expected quadatic off-curve point at index {ix}"),
            Self::ExpectedQuadOrOnCurve(ix) => write!(
                f,
                "Expected quadatic off-curve or on-curve point at index {ix}"
            ),
            Self::ExpectedCubic(ix) => write!(f, "Expected cubic off-curve point at index {ix}"),
            Self::PointFlagMismatch {
                num_points,
                num_flags,
            } => write!(
                f,
                "Number of points ({num_points}) and flags ({num_flags}) must match"
            ),
        }
    }
}

/// Converts a `glyf` outline described by points, flags and contour end points
/// to a sequence of path elements and invokes the appropriate callback on the
/// given pen for each.
///
/// The input points can have any coordinate type that implements
/// [`PointCoord`]. Output points are always generated in `f32`.
///
/// This is roughly equivalent to [`FT_Outline_Decompose`](https://freetype.org/freetype2/docs/reference/ft2-outline_processing.html#ft_outline_decompose).
///
/// See [`contour_to_path`] for a more general function that takes an iterator
/// if your outline data is in a different format.
pub(crate) fn to_path<C: PointCoord>(
    points: &[Point<C>],
    flags: &[PointFlags],
    contours: &[u16],
    path_style: PathStyle,
    pen: &mut impl OutlinePen,
) -> Result<(), ToPathError> {
    for contour_ix in 0..contours.len() {
        let start_ix = if contour_ix > 0 {
            contours[contour_ix - 1] as usize + 1
        } else {
            Default::default()
        };
        let end_ix = contours[contour_ix] as usize;
        if end_ix < start_ix || end_ix >= points.len() {
            return Err(ToPathError::ContourOrder(contour_ix));
        }
        let points = &points[start_ix..=end_ix];
        if points.is_empty() {
            continue;
        }
        let flags = flags
            .get(start_ix..=end_ix)
            .ok_or(ToPathError::PointFlagMismatch {
                num_points: points.len(),
                num_flags: flags.len(),
            })?;
        let [first_point, last_point] = [
            (points.first(), flags.first()),
            (points.last(), flags.last()),
        ]
        .map(|(point, flags)| {
            let point = point.unwrap();
            ContourPoint {
                x: point.x,
                y: point.y,
                flags: *flags.unwrap(),
            }
        });
        contour_to_path(
            points.iter().zip(flags).map(|(point, flags)| ContourPoint {
                x: point.x,
                y: point.y,
                flags: *flags,
            }),
            first_point,
            last_point,
            path_style,
            pen,
        )
        .map_err(|e| match &e {
            ToPathError::ExpectedCubic(ix) => ToPathError::ExpectedCubic(ix + start_ix),
            ToPathError::ExpectedQuad(ix) => ToPathError::ExpectedQuad(ix + start_ix),
            ToPathError::ExpectedQuadOrOnCurve(ix) => {
                ToPathError::ExpectedQuadOrOnCurve(ix + start_ix)
            }
            _ => e,
        })?
    }
    Ok(())
}

/// Combination of point coordinates and flags.
#[derive(Copy, Clone, Default, Debug)]
pub(crate) struct ContourPoint<T> {
    pub x: T,
    pub y: T,
    pub flags: PointFlags,
}

impl<T> ContourPoint<T>
where
    T: PointCoord,
{
    fn point_f32(&self) -> Point<f32> {
        Point::new(self.x.to_f32(), self.y.to_f32())
    }

    fn midpoint(&self, other: Self) -> ContourPoint<T> {
        let (x, y) = (self.x.midpoint(other.x), self.y.midpoint(other.y));
        Self {
            x,
            y,
            flags: other.flags,
        }
    }
}

/// Generates a path from an iterator of contour points.
///
/// Note that this requires the last point of the contour to be passed
/// separately to support FreeType style path conversion when the contour
/// begins with an off curve point. The points iterator should still
/// yield the last point as well.
///
/// This is more general than [`to_path`] and exists to support cases (such as
/// autohinting) where the source outline data is in a different format.
#[inline(always)]
pub(crate) fn contour_to_path<C: PointCoord>(
    points: impl ExactSizeIterator<Item = ContourPoint<C>>,
    first_point: ContourPoint<C>,
    last_point: ContourPoint<C>,
    style: PathStyle,
    pen: &mut impl OutlinePen,
) -> Result<(), ToPathError> {
    // We don't accept an off curve cubic as the first point
    if first_point.flags.is_off_curve_cubic() {
        return Err(ToPathError::ExpectedQuadOrOnCurve(0));
    }
    match style {
        PathStyle::FreeType => contour_to_path_freetype(points, first_point, last_point, pen),
        PathStyle::HarfBuzz => contour_to_path_harfbuzz(points, first_point, pen),
    }
}

fn contour_to_path_freetype<C: PointCoord>(
    points: impl ExactSizeIterator<Item = ContourPoint<C>>,
    first_point: ContourPoint<C>,
    last_point: ContourPoint<C>,
    pen: &mut impl OutlinePen,
) -> Result<(), ToPathError> {
    let mut points = points.enumerate();
    // For FreeType style, we may need to omit the last point if we find the
    // first on curve there
    let mut omit_last = false;
    // Find our starting point
    let start_point = if first_point.flags.is_off_curve_quad() {
        if last_point.flags.is_on_curve() {
            // The last point is an on curve, so let's start there
            omit_last = true;
            last_point
        } else {
            // It's also an off curve, so take implicit midpoint
            last_point.midpoint(first_point)
        }
    } else {
        // We're starting with an on curve, so consume the point
        points.next();
        first_point
    };
    let point = start_point.point_f32();
    pen.move_to(point.x, point.y);
    let mut state = PendingState::default();
    if omit_last {
        let end_ix = points.len() - 1;
        for (ix, point) in points {
            if ix == end_ix {
                break;
            }
            state.emit(ix, point, pen)?;
        }
    } else {
        for (ix, point) in points {
            state.emit(ix, point, pen)?;
        }
    }
    state.finish(0, start_point, pen)?;
    Ok(())
}

fn contour_to_path_harfbuzz<C: PointCoord>(
    points: impl ExactSizeIterator<Item = ContourPoint<C>>,
    first_point: ContourPoint<C>,
    pen: &mut impl OutlinePen,
) -> Result<(), ToPathError> {
    let mut points = points.enumerate().peekable();
    // For HarfBuzz style, may skip up to two points in finding the start, so
    // process these at the end
    let mut trailing_points = [None; 2];
    // Find our starting point
    let start_point = if first_point.flags.is_off_curve_quad() {
        // Always consume the first point
        points.next();
        // Then check the next point
        let Some((_, next_point)) = points.peek().copied() else {
            // This is a single point contour
            return Ok(());
        };
        if next_point.flags.is_on_curve() {
            points.next();
            trailing_points = [Some((0, first_point)), Some((1, next_point))];
            // Next is on curve, so let's start there
            next_point
        } else {
            // It's also an off curve, so take the implicit midpoint
            trailing_points = [Some((0, first_point)), None];
            first_point.midpoint(next_point)
        }
    } else {
        // We're starting with an on curve, so consume the point
        points.next();
        first_point
    };
    let point = start_point.point_f32();
    pen.move_to(point.x, point.y);
    let mut state = PendingState::default();
    for (ix, point) in points {
        state.emit(ix, point, pen)?;
    }
    for (ix, point) in trailing_points.iter().filter_map(|x| *x) {
        state.emit(ix, point, pen)?;
    }
    state.finish(0, start_point, pen)?;
    Ok(())
}

#[derive(Copy, Clone, Default)]
enum PendingState<C> {
    /// No pending points.
    #[default]
    Empty,
    /// Pending off-curve quad point.
    PendingQuad(ContourPoint<C>),
    /// Single pending off-curve cubic point.
    PendingCubic(ContourPoint<C>),
    /// Two pending off-curve cubic points.
    TwoPendingCubics(ContourPoint<C>, ContourPoint<C>),
}

impl<C> PendingState<C>
where
    C: PointCoord,
{
    #[inline(always)]
    fn emit(
        &mut self,
        ix: usize,
        point: ContourPoint<C>,
        pen: &mut impl OutlinePen,
    ) -> Result<(), ToPathError> {
        let flags = point.flags;
        match *self {
            Self::Empty => {
                if flags.is_off_curve_quad() {
                    *self = Self::PendingQuad(point);
                } else if flags.is_off_curve_cubic() {
                    *self = Self::PendingCubic(point);
                } else {
                    let p = point.point_f32();
                    pen.line_to(p.x, p.y);
                }
            }
            Self::PendingQuad(quad) => {
                if flags.is_off_curve_quad() {
                    let c0 = quad.point_f32();
                    let p = quad.midpoint(point).point_f32();
                    pen.quad_to(c0.x, c0.y, p.x, p.y);
                    *self = Self::PendingQuad(point);
                } else if flags.is_off_curve_cubic() {
                    return Err(ToPathError::ExpectedQuadOrOnCurve(ix));
                } else {
                    let c0 = quad.point_f32();
                    let p = point.point_f32();
                    pen.quad_to(c0.x, c0.y, p.x, p.y);
                    *self = Self::Empty;
                }
            }
            Self::PendingCubic(cubic) => {
                if flags.is_off_curve_cubic() {
                    *self = Self::TwoPendingCubics(cubic, point);
                } else {
                    return Err(ToPathError::ExpectedCubic(ix));
                }
            }
            Self::TwoPendingCubics(cubic0, cubic1) => {
                if flags.is_off_curve_quad() {
                    return Err(ToPathError::ExpectedCubic(ix));
                } else if flags.is_off_curve_cubic() {
                    let c0 = cubic0.point_f32();
                    let c1 = cubic1.point_f32();
                    let p = cubic1.midpoint(point).point_f32();
                    pen.curve_to(c0.x, c0.y, c1.x, c1.y, p.x, p.y);
                    *self = Self::PendingCubic(point);
                } else {
                    let c0 = cubic0.point_f32();
                    let c1 = cubic1.point_f32();
                    let p = point.point_f32();
                    pen.curve_to(c0.x, c0.y, c1.x, c1.y, p.x, p.y);
                    *self = Self::Empty;
                }
            }
        }
        Ok(())
    }

    fn finish(
        mut self,
        start_ix: usize,
        mut start_point: ContourPoint<C>,
        pen: &mut impl OutlinePen,
    ) -> Result<(), ToPathError> {
        match self {
            Self::Empty => {}
            _ => {
                // We always want to end with an explicit on-curve
                start_point.flags = PointFlags::on_curve();
                self.emit(start_ix, start_point, pen)?;
            }
        }
        pen.close();
        Ok(())
    }
}

#[cfg(test)]
mod tests {
    use super::{super::pen::SvgPen, *};
    use raw::types::F26Dot6;

    fn assert_off_curve_path_to_svg(expected: &str, path_style: PathStyle, all_off_curve: bool) {
        fn pt(x: i32, y: i32) -> Point<F26Dot6> {
            Point::new(x, y).map(F26Dot6::from_bits)
        }
        let mut flags = [PointFlags::off_curve_quad(); 4];
        if !all_off_curve {
            flags[1] = PointFlags::on_curve();
        }
        let contours = [3];
        // This test is meant to prevent a bug where the first move-to was computed improperly
        // for a contour consisting of all off curve points.
        // In this case, the start of the path should be the midpoint between the first and last points.
        // For this test case (in 26.6 fixed point): [(640, 128) + (128, 128)] / 2 = (384, 128)
        // which becomes (6.0, 2.0) when converted to floating point.
        let points = [pt(640, 128), pt(256, 64), pt(640, 64), pt(128, 128)];
        let mut pen = SvgPen::with_precision(1);
        to_path(&points, &flags, &contours, path_style, &mut pen).unwrap();
        assert_eq!(pen.as_ref(), expected);
    }

    #[test]
    fn all_off_curve_to_path_scan_backward() {
        assert_off_curve_path_to_svg(
            "M6.0,2.0 Q10.0,2.0 7.0,1.5 Q4.0,1.0 7.0,1.0 Q10.0,1.0 6.0,1.5 Q2.0,2.0 6.0,2.0 Z",
            PathStyle::FreeType,
            true,
        );
    }

    #[test]
    fn all_off_curve_to_path_scan_forward() {
        assert_off_curve_path_to_svg(
            "M7.0,1.5 Q4.0,1.0 7.0,1.0 Q10.0,1.0 6.0,1.5 Q2.0,2.0 6.0,2.0 Q10.0,2.0 7.0,1.5 Z",
            PathStyle::HarfBuzz,
            true,
        );
    }

    #[test]
    fn start_off_curve_to_path_scan_backward() {
        assert_off_curve_path_to_svg(
            "M6.0,2.0 Q10.0,2.0 4.0,1.0 Q10.0,1.0 6.0,1.5 Q2.0,2.0 6.0,2.0 Z",
            PathStyle::FreeType,
            false,
        );
    }

    #[test]
    fn start_off_curve_to_path_scan_forward() {
        assert_off_curve_path_to_svg(
            "M4.0,1.0 Q10.0,1.0 6.0,1.5 Q2.0,2.0 6.0,2.0 Q10.0,2.0 4.0,1.0 Z",
            PathStyle::HarfBuzz,
            false,
        );
    }
}