flexaudio-core 0.3.0

//! Normalize arbitrary device frames (any sample rate/channel count, interleaved f32)
//! in two stages, then convert them back to the requested output format.
//!
//! ```text
//! Input (any sample rate/channel count)
//!   │  Stage 1 (internal normalization; fixed)
//!   │   - Channel mix (→stereo)
//!   │   - Sample-rate conversion (rubato, →48000)
//!   ▼
//! Internal canonical form: f32 / 48000 Hz / stereo / 20ms = 960 frames
//!   │  Stage 2 (output; per tap)
//!   │   - Channel conversion (stereo→mono average / mono→stereo duplicate / unchanged)
//!   │   - Sample-rate conversion (rubato, 48000→output.sample_rate; passthrough if equal)
//!   ▼
//! Output: f32 / output.sample_rate / output.channels / fixed 20ms duration
//!        (48k=960 / 16k=320 / 8k=160 frames)
//! ```
//!
//! With the default output `{48000, 2}`, stage 2 is entirely passthrough (the internal
//! canonical form is emitted as-is). Stage 1 sample-rate conversion is bypassed when
//! `in_sample_rate == 48000`; stage 2 conversion is bypassed when `output.sample_rate == 48000`.
//!
//! Both rubato resamplers use `FixedAsync::Input` (fixed input chunks). Variable-length output
//! is collected in an internal accumulator and split at 20ms boundaries. The resampler and
//! accumulator carry any remainder forward.
//!
//! PTS is assigned by tracking the input-to-output sample-offset ratio from `device_pts`
//! corresponding to the first sample of each output chunk. The stream layer assigns `seq`.

use rubato::audioadapter_buffers::direct::InterleavedSlice;
use rubato::{
    Async, FixedAsync, Indexing, Resampler, SincInterpolationParameters, SincInterpolationType,
    WindowFunction,
};

use crate::types::{Error, OutputFormat, Result, CHANNELS, SAMPLE_RATE};

/// Frames per internal canonical-form chunk (20ms @ 48kHz). Stage 1 split boundary.
pub const CHUNK_FRAMES: usize = 960;

/// Channel count in the internal canonical form (stereo).
const INNER_CH: usize = CHANNELS as usize; // 2

/// A processor applied to the internal normalized form (48kHz / stereo /
/// interleaved f32) *before* it is split into the output taps.
///
/// Kept behind a trait so `flexaudio-core` stays independent of any concrete
/// DSP implementation (e.g. noise suppression). The facade injects an
/// implementation; the core only sees this contract. Because the same
/// processed samples feed every output tap, a single processor affects both the
/// primary and secondary outputs.
///
/// [`process`](Self::process) runs on each batch of normalized samples in
/// place. [`flush`](Self::flush) is called once at stop to recover any tail the
/// processor is holding back (e.g. a fixed delay line); it returns the trailing
/// 48kHz / stereo interleaved samples (empty if none).
pub trait InnerProcessor: Send {
    /// Process one batch of 48kHz / stereo interleaved samples in place. The
    /// slice length is always a multiple of two (stereo).
    fn process(&mut self, samples: &mut [f32]);
    /// Flush and return any buffered tail (48kHz / stereo interleaved). Called
    /// once when the stream stops. Returns an empty vector when nothing is held.
    fn flush(&mut self) -> Vec<f32>;
}

/// Stateful two-stage converter that normalizes input device frames to the internal canonical
/// form (48k/stereo/960 frames), then converts them to one or more output taps (primary and
/// optional secondary).
///
/// Stage 1 (internal normalization) runs once and feeds the resulting canonical form to stage 2
/// of both taps. An optional [`InnerProcessor`] is applied once to the canonical form before it
/// is split for stage 2, so both taps receive the same processed audio.
///
/// Accumulate interleaved samples with `push`, then retrieve completed output chunks one at a
/// time with `pop_chunk` (primary) and `pop_secondary` (secondary).
pub struct Normalizer {
    in_sample_rate: u32,
    in_channels: usize,

    // --- Stage 1 (internal normalization: → 48k/stereo, shared by all output taps) ---
    /// Passthrough when the input is 48000 Hz (no resampler).
    stage1_resampler: Option<ResamplerState>,
    /// Temporary buffer for the internal canonical form (48k/stereo interleaved) generated by
    /// this push. Apply [`InnerProcessor`] before distributing it to each output tap. Reuse capacity.
    inner_scratch: Vec<f32>,
    /// Total internal 48k frames generated by stage 1 so far (for PTS anchor calculation).
    total_inner_frames: u64,

    /// Optional processor (e.g. noise suppression) applied once to the internal canonical form
    /// before the stage 2 split.
    inner_processor: Option<Box<dyn InnerProcessor>>,

    // --- Output taps (each has its own stage 2, output buffer, and PTS state) ---
    /// Primary output tap (its [`OutputFormat`] is `output`).
    primary: OutputTap,
    /// Secondary output tap (when configured). Has stage 2 and PTS state independent of primary.
    secondary: Option<OutputTap>,
}

/// One output tap. Receives the shared internal canonical form (48k/stereo), converts channels
/// and sample rate to its [`OutputFormat`], then emits fixed 20ms chunks. Each tap has its own
/// PTS anchor and output buffer (which can cause tens of milliseconds of PTS offset between taps).
struct OutputTap {
    output: OutputFormat,
    /// Output stage. `None` (full passthrough) when `output == {48000, 2}`, matching the canonical form.
    stage2: Option<OutputStage>,
    /// Output awaiting completion (interleaved with `output.channels`). `pop` drains from here.
    out_buf: Vec<f32>,
    /// Frames in one output chunk (`output.chunk_frames()`).
    out_chunk_frames: usize,
    /// Output channel count.
    out_channels: usize,
    /// Output frame index for the first sample in `out_buf` (the oldest sample not yet popped).
    out_frame_origin: u64,
    /// PTS anchor: associates an output frame index with `device_pts` (ns).
    pts_anchor: Option<PtsAnchor>,
}

#[derive(Clone, Copy)]
struct PtsAnchor {
    /// Output frame index, based on the output sample rate.
    out_frame: u64,
    /// `device_pts` (ns) corresponding to that output frame.
    pts_ns: i64,
}

/// Sample-rate converter wrapping rubato `Async` (`FixedAsync::Input`) for one stage.
///
/// Calls `process` for each fixed input chunk of `chunk_in_frames` frames and appends variable-length
/// output to `out_buf` (the caller's accumulator). `channels` varies by stage (always stereo=2 in
/// stage 1; the output channel count in stage 2).
struct ResamplerState {
    inner: Async<f32>,
    channels: usize,
    /// Input frames required per rubato call (fixed by `FixedAsync::Input`).
    chunk_in_frames: usize,
    /// Maximum output frames one `process` call can produce.
    max_out_frames: usize,
    /// Unprocessed input (interleaved, `channels` channels).
    in_accum: Vec<f32>,
    /// Output scratch buffer for rubato (reused to avoid allocations).
    out_scratch: Vec<f32>,
}

/// Stage 2 (output). Receives 960-frame chunks in the internal 48k/stereo canonical form and
/// converts channels and sample rate to produce interleaved output in the requested format.
struct OutputStage {
    out_channels: usize,
    /// Resampler from 48000 to `output.sample_rate`. `None` (sample-rate passthrough) when
    /// `output.sample_rate == 48000`. Applied to samples after channel conversion.
    resampler: Option<ResamplerState>,
    /// Scratch buffer after channel conversion and before sample-rate conversion (48k / `out_channels` interleaved).
    ch_scratch: Vec<f32>,
}

impl Normalizer {
    /// Create a normalizer for the input sample rate, input channel count, and output format.
    ///
    /// Stage 1 normalizes input to 48k/stereo (`in_sample_rate == 48000` bypasses sample-rate
    /// conversion; `in_channels` of 1 duplicates mono to stereo, 2 is unchanged, and 3 or more
    /// uses the front two channels). Stage 2 converts the canonical form to `output` (passthrough
    /// when `output == {48000, 2}`).
    ///
    /// Expects the caller to have run [`OutputFormat::validate`] on `output` (this method does not
    /// clamp it to a valid range).
    ///
    /// rubato resampler construction can fail, for example with extreme rate ratios. Panicking
    /// would silently stop the non-RT capture thread, so failures return [`Error::Backend`] and
    /// propagate to the caller.
    pub fn new(in_sample_rate: u32, in_channels: u16, output: OutputFormat) -> Result<Self> {
        let in_channels = in_channels.max(1) as usize;

        // Stage 1 resampler (→48000). Runs once for all output taps.
        let stage1_resampler = if in_sample_rate == SAMPLE_RATE {
            None
        } else {
            Some(ResamplerState::new(in_sample_rate, SAMPLE_RATE, INNER_CH)?)
        };

        Ok(Self {
            in_sample_rate,
            in_channels,
            stage1_resampler,
            inner_scratch: Vec::with_capacity(CHUNK_FRAMES * INNER_CH * 4),
            total_inner_frames: 0,
            inner_processor: None,
            primary: OutputTap::new(output)?,
            secondary: None,
        })
    }

    /// Add a secondary output tap (expects [`OutputFormat::validate`] to have been called).
    ///
    /// The internal canonical form (48k/stereo) is generated once and fed to stage 2 of both taps.
    /// The secondary tap has independent stage 2 and PTS state, and emits its own fixed 20ms chunks.
    /// rubato construction failures return [`Error::Backend`].
    pub fn with_secondary(mut self, secondary: OutputFormat) -> Result<Self> {
        self.secondary = Some(OutputTap::new(secondary)?);
        Ok(self)
    }

    /// Inject a processor to apply once to the internal canonical form before the stage 2 split.
    pub fn with_inner_processor(mut self, processor: Box<dyn InnerProcessor>) -> Self {
        self.inner_processor = Some(processor);
        self
    }

    /// Input sample rate (Hz).
    pub fn in_sample_rate(&self) -> u32 {
        self.in_sample_rate
    }

    /// Primary output format.
    pub fn output(&self) -> OutputFormat {
        self.primary.output
    }

    /// Secondary output format (only when a secondary tap is configured).
    pub fn secondary_output(&self) -> Option<OutputFormat> {
        self.secondary.as_ref().map(|t| t.output)
    }

    /// Whether a secondary tap is enabled.
    pub fn has_secondary(&self) -> bool {
        self.secondary.is_some()
    }

    /// Whether stage 1 sample-rate conversion is bypassed (`in == 48000`).
    pub fn is_passthrough(&self) -> bool {
        self.stage1_resampler.is_none()
    }

    /// Whether stage 2 for the primary output is fully bypassed (`output == {48000, 2}`).
    pub fn is_output_passthrough(&self) -> bool {
        self.primary.stage2.is_none()
    }

    /// Accumulate interleaved input samples.
    ///
    /// `interleaved` must have a length divisible by `in_channels`. `device_pts_ns` is the
    /// device-provided PTS for the first frame in this push.
    ///
    /// Returns [`Error::Backend`] if rubato's `process` fails. This avoids silently stopping the
    /// capture thread with a panic and lets the caller stop the stream explicitly.
    pub fn push(&mut self, interleaved: &[f32], device_pts_ns: i64) -> Result<()> {
        if interleaved.is_empty() {
            return Ok(());
        }
        let in_frames = interleaved.len() / self.in_channels;
        if in_frames == 0 {
            return Ok(());
        }

        // Approximate the future output frame position for the start of this push by the sample-rate
        // ratio and update each tap's PTS anchor. This is approximate because the resampler retains
        // a remainder internally. Set anchors independently for primary and secondary.
        self.primary
            .update_pts_anchor(self.total_inner_frames, device_pts_ns);
        if let Some(sec) = self.secondary.as_mut() {
            sec.update_pts_anchor(self.total_inner_frames, device_pts_ns);
        }

        // Stage 1: mix channels → stereo interleaved → normalize to 48k. Collect what this push
        // generates in inner_scratch.
        self.inner_scratch.clear();
        let mut stereo = Vec::with_capacity(in_frames * INNER_CH);
        Self::mix_to_stereo(interleaved, self.in_channels, in_frames, &mut stereo);
        match &mut self.stage1_resampler {
            None => {
                // Sample-rate passthrough. Use directly as the internal canonical form.
                self.total_inner_frames += in_frames as u64;
                self.inner_scratch.extend_from_slice(&stereo);
            }
            Some(rs) => {
                rs.in_accum.extend_from_slice(&stereo);
                let produced = rs.drain_into(&mut self.inner_scratch)?;
                self.total_inner_frames += produced;
            }
        }

        // Apply a processor (e.g. denoise) once to the internal canonical form before the stage 2 split.
        if let Some(proc) = self.inner_processor.as_mut() {
            proc.process(&mut self.inner_scratch);
        }

        // Distribute the processed canonical form to stage 2 of both taps.
        self.distribute_inner()
    }

    /// Retrieve one completed primary output chunk.
    ///
    /// Returns (`out_chunk_frames` interleaved frames at `output.channels`, PTS in ns for the
    /// first sample). Returns `None` if a full chunk is not buffered.
    pub fn pop_chunk(&mut self) -> Option<(Vec<f32>, i64)> {
        self.primary.pop()
    }

    /// Retrieve one completed secondary output chunk (`None` if no secondary tap is configured).
    pub fn pop_secondary(&mut self) -> Option<(Vec<f32>, i64)> {
        self.secondary.as_mut().and_then(OutputTap::pop)
    }

    /// Flush on stop. Feed the processor's trailing tail (e.g. denoise), drain each tap's stage 2
    /// resampler remainder, and pad a final partial chunk with silence to align it to the fixed
    /// 20ms boundary so it can be retrieved with `pop_chunk` / `pop_secondary`.
    ///
    /// Continue on a best-effort basis if resampler flushing fails, so the stop path does not fail
    /// (at most the final few milliseconds are lost).
    pub fn flush(&mut self) {
        // 1. Feed the processor's trailing tail (e.g. denoise delay line) as the internal canonical form.
        if let Some(proc) = self.inner_processor.as_mut() {
            let tail = proc.flush();
            if !tail.is_empty() {
                self.inner_scratch.clear();
                self.inner_scratch.extend_from_slice(&tail);
                let _ = self.distribute_inner();
            }
        }
        // 2. Drain each tap's stage 2 resampler remainder and pad partial chunks with silence.
        self.primary.flush();
        if let Some(sec) = self.secondary.as_mut() {
            sec.flush();
        }
    }

    /// Number of output frames buffered but not yet retrieved from `out_buf` (primary tap).
    pub fn buffered_out_frames(&self) -> usize {
        self.primary.buffered_out_frames()
    }

    // --- Internal helpers ---

    /// Distribute the canonical form in `inner_scratch` to stage 2 of both taps. Temporarily take
    /// the buffer to avoid borrow conflicts, then restore its capacity.
    fn distribute_inner(&mut self) -> Result<()> {
        if self.inner_scratch.is_empty() {
            return Ok(());
        }
        let inner = std::mem::take(&mut self.inner_scratch);
        let r_primary = self.primary.feed_inner(&inner);
        let r_secondary = self
            .secondary
            .as_mut()
            .map(|sec| sec.feed_inner(&inner))
            .unwrap_or(Ok(()));
        // Restore the buffer so its capacity can be reused.
        self.inner_scratch = inner;
        self.inner_scratch.clear();
        r_primary.and(r_secondary)
    }

    /// Mix interleaved audio with any channel count to stereo interleaved and push it to `dst`.
    fn mix_to_stereo(src: &[f32], in_ch: usize, in_frames: usize, dst: &mut Vec<f32>) {
        match in_ch {
            1 => {
                // mono → stereo (duplicate L=R)
                for &s in &src[..in_frames] {
                    dst.push(s);
                    dst.push(s);
                }
            }
            2 => {
                // Keep 2 channels unchanged (only the required samples).
                dst.extend_from_slice(&src[..in_frames * 2]);
            }
            _ => {
                // For now, use the front two channels for inputs with more than 2 channels.
                // TODO(ITU-R BS.775): Apply proper downmix coefficients for 5.1 and other layouts.
                for f in 0..in_frames {
                    let base = f * in_ch;
                    dst.push(src[base]);
                    dst.push(src[base + 1]);
                }
            }
        }
    }
}

impl OutputTap {
    /// Create an output tap from an output format (expects `output` to be validated).
    fn new(output: OutputFormat) -> Result<Self> {
        let out_channels = (output.channels.max(1)) as usize;
        let out_chunk_frames = output.chunk_frames().max(1);

        // Skip stage 2 (passthrough) when output exactly matches the internal canonical form.
        let stage2 = if output.sample_rate == SAMPLE_RATE && out_channels == INNER_CH {
            None
        } else {
            Some(OutputStage::new(output.sample_rate, out_channels)?)
        };

        Ok(Self {
            output,
            stage2,
            out_buf: Vec::with_capacity(out_chunk_frames * out_channels * 4),
            out_chunk_frames,
            out_channels,
            out_frame_origin: 0,
            pts_anchor: None,
        })
    }

    /// Pass the processed internal canonical form (48k/stereo interleaved, any length) through
    /// stage 2 and append the resulting output frames to `out_buf`.
    fn feed_inner(&mut self, inner_stereo: &[f32]) -> Result<()> {
        if inner_stereo.is_empty() {
            return Ok(());
        }
        match &mut self.stage2 {
            None => {
                // Stage 2 passthrough (`output == {48000, 2}`). Append unchanged.
                self.out_buf.extend_from_slice(inner_stereo);
            }
            Some(stage) => stage.process_inner(inner_stereo, &mut self.out_buf)?,
        }
        Ok(())
    }

    /// Retrieve one completed output chunk. Returns `None` if a full chunk is not buffered.
    fn pop(&mut self) -> Option<(Vec<f32>, i64)> {
        let need = self.out_chunk_frames * self.out_channels;
        if self.out_buf.len() < need {
            return None;
        }
        let pts = self.pts_for_out_frame(self.out_frame_origin);
        let chunk: Vec<f32> = self.out_buf.drain(..need).collect();
        self.out_frame_origin += self.out_chunk_frames as u64;
        Some((chunk, pts))
    }

    /// Flush on stop. Drain the stage 2 resampler remainder and pad a final partial chunk with
    /// silence to align it to the fixed 20ms boundary for retrieval with `pop`.
    fn flush(&mut self) {
        if let Some(stage) = self.stage2.as_mut() {
            // Ignore resampler flush errors on a best-effort basis (only the final few ms are lost).
            let _ = stage.flush_into(&mut self.out_buf);
        }
        let need = self.out_chunk_frames * self.out_channels;
        let rem = self.out_buf.len() % need;
        if rem != 0 {
            let pad = need - rem;
            self.out_buf.resize(self.out_buf.len() + pad, 0.0);
        }
    }

    /// Number of output frames buffered but not yet retrieved from `out_buf`.
    fn buffered_out_frames(&self) -> usize {
        self.out_buf.len() / self.out_channels
    }

    /// Set the PTS anchor for the output frame position corresponding to the start of this push.
    ///
    /// The output frame position is an approximation mapped from the total internal frame count
    /// to the output rate (not exact because the resampler retains a remainder). `in_sample_rate`
    /// cancels out, so only the output and internal rates are needed.
    fn update_pts_anchor(&mut self, total_inner_frames: u64, device_pts_ns: i64) {
        let projected_out_frame = (total_inner_frames as f64 * self.output.sample_rate as f64
            / SAMPLE_RATE as f64) as u64;
        self.pts_anchor = Some(PtsAnchor {
            out_frame: projected_out_frame,
            pts_ns: device_pts_ns,
        });
    }

    /// Extrapolate `device_pts` (ns) for output frame index `out_frame` from the anchor using the
    /// output sample rate.
    fn pts_for_out_frame(&self, out_frame: u64) -> i64 {
        match self.pts_anchor {
            None => crate::clock::monotonic_now_ns(),
            Some(anchor) => {
                let frame_delta = out_frame as i64 - anchor.out_frame as i64;
                let ns_per_out_frame = 1_000_000_000_i64 / self.output.sample_rate as i64;
                anchor.pts_ns + frame_delta * ns_per_out_frame
            }
        }
    }
}

impl ResamplerState {
    /// Create a fixed-ratio resampler with `channels` channels from `in_sr` to `out_sr`.
    ///
    /// Returns [`Error::Backend`] if rubato construction fails (avoids a panic silently stopping
    /// the thread).
    fn new(in_sr: u32, out_sr: u32, channels: usize) -> Result<Self> {
        let ratio = out_sr as f64 / in_sr as f64;
        // Fixed input chunk of about 20ms worth of input frames (rubato retains any remainder internally).
        let chunk_in_frames = (in_sr as usize / 50).max(64);

        let params = SincInterpolationParameters {
            sinc_len: 128,
            f_cutoff: 0.95,
            interpolation: SincInterpolationType::Linear,
            oversampling_factor: 128,
            window: WindowFunction::BlackmanHarris2,
        };

        let inner = Async::<f32>::new_sinc(
            ratio,
            1.0, // Fixed ratio (no variable resampling needed)
            &params,
            chunk_in_frames,
            channels,
            FixedAsync::Input,
        )
        .map_err(|e| Error::Backend(format!("rubato sinc resampler construction failed: {e}")))?;

        let max_out_frames = inner.output_frames_max();

        Ok(Self {
            inner,
            channels,
            chunk_in_frames,
            max_out_frames,
            in_accum: Vec::with_capacity(chunk_in_frames * channels * 4),
            out_scratch: vec![0.0; max_out_frames * channels],
        })
    }

    /// Resample as much of `in_accum` as possible in `chunk_in_frames` units and append the
    /// resulting interleaved samples to `out_buf`. Returns the number of output frames generated.
    ///
    /// Returns [`Error::Backend`] if constructing a rubato adapter or calling `process_into_buffer`
    /// fails (avoids a panic silently stopping the capture thread).
    fn drain_into(&mut self, out_buf: &mut Vec<f32>) -> Result<u64> {
        let step = self.chunk_in_frames * self.channels;
        let mut produced = 0u64;

        while self.in_accum.len() >= step {
            let in_adapter =
                InterleavedSlice::new(&self.in_accum[..step], self.channels, self.chunk_in_frames)
                    .map_err(|e| {
                        Error::Backend(format!("rubato interleaved input adapter failed: {e}"))
                    })?;

            let mut out_adapter = InterleavedSlice::new_mut(
                &mut self.out_scratch[..],
                self.channels,
                self.max_out_frames,
            )
            .map_err(|e| {
                Error::Backend(format!("rubato interleaved output adapter failed: {e}"))
            })?;

            let indexing = Indexing {
                input_offset: 0,
                output_offset: 0,
                partial_len: None,
                active_channels_mask: None,
            };

            let (_in_used, out_written) = self
                .inner
                .process_into_buffer(&in_adapter, &mut out_adapter, Some(&indexing))
                .map_err(|e| Error::Backend(format!("rubato process_into_buffer failed: {e}")))?;

            let n_samples = out_written * self.channels;
            out_buf.extend_from_slice(&self.out_scratch[..n_samples]);
            produced += out_written as u64;

            // Remove consumed input (`FixedAsync::Input` always consumes `chunk_in_frames`).
            self.in_accum.drain(..step);
        }
        Ok(produced)
    }

    /// On stop, process the less-than-one-chunk remainder in `in_accum` using `partial_len`, append
    /// the resulting interleaved samples to `out_buf`, and return the number of output frames.
    ///
    /// This drains the remaining input (just under 20ms at most), leaving `in_accum` empty. It does
    /// not flush the resampler's internal filter group delay (a few ms).
    fn flush_into(&mut self, out_buf: &mut Vec<f32>) -> Result<u64> {
        let remaining = self.in_accum.len() / self.channels;
        if remaining == 0 {
            return Ok(0);
        }
        // Pad input with silence to one full chunk and pass only the valid length via `partial_len`.
        self.in_accum
            .resize(self.chunk_in_frames * self.channels, 0.0);

        let in_adapter = InterleavedSlice::new(
            &self.in_accum[..self.chunk_in_frames * self.channels],
            self.channels,
            self.chunk_in_frames,
        )
        .map_err(|e| Error::Backend(format!("rubato interleaved input adapter failed: {e}")))?;

        let mut out_adapter = InterleavedSlice::new_mut(
            &mut self.out_scratch[..],
            self.channels,
            self.max_out_frames,
        )
        .map_err(|e| Error::Backend(format!("rubato interleaved output adapter failed: {e}")))?;

        let indexing = Indexing {
            input_offset: 0,
            output_offset: 0,
            partial_len: Some(remaining),
            active_channels_mask: None,
        };

        let (_in_used, out_written) = self
            .inner
            .process_into_buffer(&in_adapter, &mut out_adapter, Some(&indexing))
            .map_err(|e| Error::Backend(format!("rubato flush process_into_buffer failed: {e}")))?;

        let n_samples = out_written * self.channels;
        out_buf.extend_from_slice(&self.out_scratch[..n_samples]);
        self.in_accum.clear();
        Ok(out_written as u64)
    }
}

impl OutputStage {
    /// Create the output stage for the output sample rate and channel count.
    ///
    /// If `out_sample_rate == 48000`, sample-rate conversion is bypassed (only channel conversion
    /// is performed). rubato construction failures propagate as [`Error::Backend`].
    fn new(out_sample_rate: u32, out_channels: usize) -> Result<Self> {
        let resampler = if out_sample_rate == SAMPLE_RATE {
            None
        } else {
            // Convert from the 48000-Hz internal canonical form to `out_sample_rate` with `out_channels` channels.
            Some(ResamplerState::new(
                SAMPLE_RATE,
                out_sample_rate,
                out_channels,
            )?)
        };
        Ok(Self {
            out_channels,
            resampler,
            ch_scratch: Vec::with_capacity(CHUNK_FRAMES * out_channels),
        })
    }

    /// Process the internal canonical form (48k/stereo interleaved, any length) and append
    /// interleaved samples in the output format to `out_buf`. Length must be a multiple of
    /// `INNER_CH` (stereo).
    fn process_inner(&mut self, inner_stereo: &[f32], out_buf: &mut Vec<f32>) -> Result<()> {
        let frames = inner_stereo.len() / INNER_CH;
        if frames == 0 {
            return Ok(());
        }

        // Channel conversion: stereo → out_channels.
        self.ch_scratch.clear();
        match self.out_channels {
            1 => {
                // stereo → mono (L/R average).
                for f in 0..frames {
                    let l = inner_stereo[f * 2];
                    let r = inner_stereo[f * 2 + 1];
                    self.ch_scratch.push((l + r) * 0.5);
                }
            }
            2 => {
                self.ch_scratch
                    .extend_from_slice(&inner_stereo[..frames * 2]);
            }
            _ => {
                // Validation should limit this to 1 or 2. If another count reaches here, duplicate L as a fallback.
                for f in 0..frames {
                    let l = inner_stereo[f * 2];
                    for _ in 0..self.out_channels {
                        self.ch_scratch.push(l);
                    }
                }
            }
        }

        // Sample-rate conversion: 48000 → out_sample_rate. On passthrough, copy ch_scratch directly to output.
        match &mut self.resampler {
            None => {
                out_buf.extend_from_slice(&self.ch_scratch);
            }
            Some(rs) => {
                rs.in_accum.extend_from_slice(&self.ch_scratch);
                rs.drain_into(out_buf)?;
            }
        }
        Ok(())
    }

    /// On stop, drain any sample-rate resampler remainder into `out_buf` (a passthrough stage has
    /// no remainder, so this is a no-op).
    fn flush_into(&mut self, out_buf: &mut Vec<f32>) -> Result<()> {
        if let Some(rs) = self.resampler.as_mut() {
            rs.flush_into(out_buf)?;
        }
        Ok(())
    }
}

#[cfg(test)]
mod tests {
    use super::*;
    use std::f32::consts::PI;

    /// Helper for the default output ({48000, 2}).
    fn default_out() -> OutputFormat {
        OutputFormat::default()
    }

    #[test]
    fn mono_48k_to_stereo_duplicates_channels() {
        let mut n = Normalizer::new(48_000, 1, default_out()).expect("normalizer");
        assert!(n.is_passthrough());
        assert!(n.is_output_passthrough());
        // 960 frames of mono input (exactly one chunk because of passthrough).
        let mono: Vec<f32> = (0..CHUNK_FRAMES).map(|i| (i as f32) * 0.001).collect();
        n.push(&mono, 0).expect("push");
        let (chunk, _pts) = n.pop_chunk().expect("one chunk");
        assert_eq!(chunk.len(), CHUNK_FRAMES * 2);
        // L == R holds for every frame.
        for f in 0..CHUNK_FRAMES {
            assert_eq!(chunk[f * 2], chunk[f * 2 + 1], "L==R at frame {f}");
            assert_eq!(chunk[f * 2], mono[f]);
        }
    }

    #[test]
    fn passthrough_preserves_frame_count() {
        let mut n = Normalizer::new(48_000, 2, default_out()).expect("normalizer");
        assert!(n.is_passthrough());
        assert!(n.is_output_passthrough());
        // Two chunks plus a remainder.
        let frames = CHUNK_FRAMES * 2 + 100;
        let stereo: Vec<f32> = (0..frames * 2).map(|i| (i as f32) * 1e-4).collect();
        n.push(&stereo, 0).expect("push");

        let mut got_frames = 0usize;
        while let Some((c, _)) = n.pop_chunk() {
            assert_eq!(c.len(), CHUNK_FRAMES * 2);
            got_frames += CHUNK_FRAMES;
        }
        // Exactly two chunks can be retrieved; 100 remainder frames are left.
        assert_eq!(got_frames, CHUNK_FRAMES * 2);
        assert_eq!(n.buffered_out_frames(), 100);
    }

    #[test]
    fn stereo_44100_to_48000_yields_about_50_chunks_per_second() {
        let mut n = Normalizer::new(44_100, 2, default_out()).expect("normalizer");
        assert!(!n.is_passthrough());

        // One second of 44100Hz stereo sine wave.
        let in_frames = 44_100;
        let freq = 440.0_f32;
        let mut interleaved = Vec::with_capacity(in_frames * 2);
        for i in 0..in_frames {
            let s = (2.0 * PI * freq * (i as f32) / 44_100.0).sin() * 0.5;
            interleaved.push(s); // L
            interleaved.push(s); // R
        }

        // Must not panic even with small, separate pushes (simulating small buffers from real hardware).
        let mut pts = 0i64;
        for block in interleaved.chunks(441 * 2) {
            n.push(block, pts).expect("push");
            pts += (block.len() as i64 / 2) * 1_000_000_000 / 44_100;
        }

        let mut chunks = 0usize;
        while let Some((c, _pts)) = n.pop_chunk() {
            assert_eq!(c.len(), CHUNK_FRAMES * 2);
            chunks += 1;
        }
        assert!(
            (47..=50).contains(&chunks),
            "expected ~50 chunks, got {chunks}"
        );
    }

    #[test]
    fn pts_increases_monotonically_across_chunks() {
        let mut n = Normalizer::new(48_000, 2, default_out()).expect("normalizer");
        let frames = CHUNK_FRAMES * 3;
        let stereo = vec![0.0f32; frames * 2];
        n.push(&stereo, 100_000_000).expect("push");

        let mut last = i64::MIN;
        let mut count = 0;
        while let Some((_, pts)) = n.pop_chunk() {
            assert!(pts >= last, "pts must be non-decreasing");
            last = pts;
            count += 1;
        }
        assert_eq!(count, 3);
    }

    // --- Stage 2 (output) tests ---

    /// 48k/stereo input + {16000, 1} output → 320-frame mono chunks.
    #[test]
    fn output_16k_mono_yields_320_frame_mono_chunks() {
        let out = OutputFormat {
            sample_rate: 16_000,
            channels: 1,
        };
        let mut n = Normalizer::new(48_000, 2, out).expect("normalizer");
        assert!(n.is_passthrough()); // Stage 1 sample-rate passthrough (48k input).
        assert!(!n.is_output_passthrough()); // Stage 2 is active.

        // One second of 48k stereo sine wave (pushed in small blocks).
        let in_frames = 48_000;
        let freq = 440.0_f32;
        let mut pts = 0i64;
        for blk in 0..(in_frames / 480) {
            let mut block = Vec::with_capacity(480 * 2);
            for j in 0..480 {
                let i = blk * 480 + j;
                let s = (2.0 * PI * freq * (i as f32) / 48_000.0).sin() * 0.5;
                block.push(s);
                block.push(s);
            }
            n.push(&block, pts).expect("push");
            pts += 480 * 1_000_000_000 / 48_000;
        }

        let mut chunks = 0usize;
        while let Some((c, _)) = n.pop_chunk() {
            assert_eq!(c.len(), 320, "16k mono 20ms = 320 sample (mono)");
            chunks += 1;
        }
        // 16000/320 = 50 chunks/second; approximately 50 after resampler latency.
        assert!(
            (47..=50).contains(&chunks),
            "expected ~50 chunks, got {chunks}"
        );
    }

    /// Output {16000, 2} → 320 frames / 640 samples (stereo).
    #[test]
    fn output_16k_stereo_yields_320_frame_640_sample_chunks() {
        let out = OutputFormat {
            sample_rate: 16_000,
            channels: 2,
        };
        let mut n = Normalizer::new(48_000, 2, out).expect("normalizer");
        let in_frames = 48_000;
        let stereo: Vec<f32> = (0..in_frames * 2)
            .map(|i| ((i / 2) as f32 * 0.0001).sin() * 0.3)
            .collect();
        for block in stereo.chunks(480 * 2) {
            n.push(block, 0).expect("push");
        }
        let mut chunks = 0usize;
        while let Some((c, _)) = n.pop_chunk() {
            assert_eq!(c.len(), 640, "16k stereo 20ms = 320 frame * 2 = 640 sample");
            chunks += 1;
        }
        assert!(
            (47..=50).contains(&chunks),
            "expected ~50 chunks, got {chunks}"
        );
    }

    /// Output {8000, 2} → 160 frames / 320 samples.
    #[test]
    fn output_8k_stereo_yields_160_frame_chunks() {
        let out = OutputFormat {
            sample_rate: 8_000,
            channels: 2,
        };
        let mut n = Normalizer::new(48_000, 2, out).expect("normalizer");
        let stereo: Vec<f32> = (0..48_000 * 2)
            .map(|i| (i as f32 * 1e-5).sin() * 0.2)
            .collect();
        for block in stereo.chunks(480 * 2) {
            n.push(block, 0).expect("push");
        }
        let mut chunks = 0usize;
        while let Some((c, _)) = n.pop_chunk() {
            assert_eq!(c.len(), 320, "8k stereo 20ms = 160 frame * 2 = 320 sample");
            chunks += 1;
        }
        assert!(
            (47..=50).contains(&chunks),
            "expected ~50 chunks, got {chunks}"
        );
    }

    /// stereo→mono averages L/R (opposite phase, L=+a and R=-a, approaches 0).
    #[test]
    fn stereo_to_mono_is_lr_average() {
        // Use 48000/mono output to test sample-rate passthrough and channel conversion only.
        let out = OutputFormat {
            sample_rate: 48_000,
            channels: 1,
        };
        let mut n = Normalizer::new(48_000, 2, out).expect("normalizer");
        // Perfectly opposite phase (L=+0.5, R=-0.5) → average 0.
        let mut stereo = Vec::with_capacity(CHUNK_FRAMES * 2);
        for _ in 0..CHUNK_FRAMES {
            stereo.push(0.5);
            stereo.push(-0.5);
        }
        n.push(&stereo, 0).expect("push");
        let (chunk, _) = n.pop_chunk().expect("one mono chunk");
        assert_eq!(chunk.len(), CHUNK_FRAMES); // 960 mono samples.
        for &s in &chunk {
            assert!(
                s.abs() < 1e-6,
                "opposite-phase average should be near 0: {s}"
            );
        }
    }

    // --- Value-check helpers (verify amplitude and frequency preservation) ---

    /// RMS of a sample sequence (linear). For a sine wave, this is A/√2 for amplitude A.
    fn rms(samples: &[f32]) -> f32 {
        if samples.is_empty() {
            return 0.0;
        }
        let sum_sq: f64 = samples.iter().map(|&x| (x as f64) * (x as f64)).sum();
        (sum_sq / samples.len() as f64).sqrt() as f32
    }

    /// Count zero crossings from positive to negative or negative to positive. There are two
    /// crossings per cycle, so estimated frequency = (crossings / 2) / seconds. Pass the middle
    /// section to avoid transients at the start and end.
    fn zero_crossings(samples: &[f32]) -> usize {
        let mut crossings = 0;
        for w in samples.windows(2) {
            // Count strict sign changes only (ignore exact zero).
            if (w[0] < 0.0 && w[1] >= 0.0) || (w[0] >= 0.0 && w[1] < 0.0) {
                crossings += 1;
            }
        }
        crossings
    }

    /// Resampling a 44.1kHz/mono 440Hz sine wave to 48kHz/stereo preserves its amplitude (RMS)
    /// and frequency (estimated by zero crossings). Process one second and measure only the
    /// middle chunks to avoid resampler ringing.
    #[test]
    fn resample_44100_to_48000_preserves_amplitude_and_frequency() {
        let mut n = Normalizer::new(44_100, 1, default_out()).expect("normalizer");
        let freq = 440.0_f32;
        let amp = 0.5_f32;
        let in_rate = 44_100usize;
        // Process two seconds to get enough chunks and leave room to discard transients.
        let total_frames = in_rate * 2;
        let mut pts = 0i64;
        for blk in 0..(total_frames / 441) {
            let mut block = Vec::with_capacity(441);
            for j in 0..441 {
                let i = blk * 441 + j;
                block.push((2.0 * PI * freq * (i as f32) / in_rate as f32).sin() * amp);
            }
            n.push(&block, pts).expect("push");
            pts += 441 * 1_000_000_000 / in_rate as i64;
        }

        // Concatenate all chunks (48k/stereo/960 frames output).
        let mut left: Vec<f32> = Vec::new();
        while let Some((c, _)) = n.pop_chunk() {
            assert_eq!(c.len(), CHUNK_FRAMES * 2);
            // Keep only the L channel (mono→stereo duplication means L==R).
            for f in 0..CHUNK_FRAMES {
                assert_eq!(c[f * 2], c[f * 2 + 1], "L==R for mono input");
                left.push(c[f * 2]);
            }
        }
        assert!(
            left.len() >= 48_000,
            "need at least 1 second of output: {}",
            left.len()
        );

        // Discard 0.25 seconds (12000 samples) of transients at each end and measure the middle second.
        let start = 12_000;
        let mid = &left[start..start + 48_000];

        // Amplitude: sine-wave RMS is amp/√2 ≈ 0.3536. Allow ±5% through the resampler.
        let got_rms = rms(mid);
        let expect_rms = amp / std::f32::consts::SQRT_2;
        let rms_err = ((got_rms - expect_rms) / expect_rms).abs();
        assert!(
            rms_err < 0.05,
            "RMS preservation error too large: got={got_rms} expect={expect_rms} err={rms_err}"
        );

        // Frequency: expect ≈ 2*440 = 880 crossings in the middle second (48000 samples), within ±2%.
        let crossings = zero_crossings(mid);
        let est_freq = crossings as f32 / 2.0; // One second, so crossings/2 = Hz.
        let freq_err = ((est_freq - freq) / freq).abs();
        assert!(
            freq_err < 0.02,
            "Frequency preservation error too large: crossings={crossings} estimate={est_freq}Hz err={freq_err}"
        );
    }

    /// Verify the channel count and sample values of 16k/mono output: converting 48k/stereo
    /// 440Hz input to 16k/mono preserves amplitude and frequency in 1-channel, 320-sample chunks.
    #[test]
    fn output_16k_mono_preserves_values() {
        let out = OutputFormat {
            sample_rate: 16_000,
            channels: 1,
        };
        let mut n = Normalizer::new(48_000, 2, out).expect("normalizer");
        let freq = 440.0_f32;
        let amp = 0.5_f32;
        let in_rate = 48_000usize;
        let total_frames = in_rate * 2;
        let mut pts = 0i64;
        for blk in 0..(total_frames / 480) {
            let mut block = Vec::with_capacity(480 * 2);
            for j in 0..480 {
                let i = blk * 480 + j;
                let s = (2.0 * PI * freq * (i as f32) / in_rate as f32).sin() * amp;
                block.push(s); // L
                block.push(s); // R
            }
            n.push(&block, pts).expect("push");
            pts += 480 * 1_000_000_000 / in_rate as i64;
        }

        let mut mono: Vec<f32> = Vec::new();
        while let Some((c, _)) = n.pop_chunk() {
            assert_eq!(c.len(), 320, "16k/mono 20ms = 320 samples (1ch)");
            mono.extend_from_slice(&c);
        }
        assert!(
            mono.len() >= 16_000,
            "need at least 1 second: {}",
            mono.len()
        );

        // Discard transients and measure the middle second (16000 samples).
        let start = 4_000;
        let mid = &mono[start..start + 16_000];

        // Averaging in-phase L==R leaves the level unchanged → RMS ≈ amp/√2.
        let got_rms = rms(mid);
        let expect_rms = amp / std::f32::consts::SQRT_2;
        let rms_err = ((got_rms - expect_rms) / expect_rms).abs();
        assert!(
            rms_err < 0.05,
            "16k/mono RMS preservation error: got={got_rms} expect={expect_rms} err={rms_err}"
        );

        // Frequency: expect ≈ 880 crossings in the middle second (16000 samples), within ±2%.
        let est_freq = zero_crossings(mid) as f32 / 2.0;
        let freq_err = ((est_freq - freq) / freq).abs();
        assert!(
            freq_err < 0.02,
            "16k/mono frequency preservation error: estimate={est_freq}Hz err={freq_err}"
        );
    }

    /// PTS increases monotonically, and the delta between adjacent chunks is about 20ms
    /// (1e7 ns, within tolerance). Check measured values to verify PTS anchor extrapolation on
    /// the 48k passthrough path.
    #[test]
    fn pts_delta_is_about_20ms_between_chunks() {
        let mut n = Normalizer::new(48_000, 2, default_out()).expect("normalizer");
        // Push 480 frames (10ms) at a time with PTS (simulating small buffers from real hardware).
        let mut device_pts = 1_000_000_000i64; // Arbitrary origin.
        let block_frames = 480usize;
        for _ in 0..20 {
            let stereo = vec![0.1f32; block_frames * 2];
            n.push(&stereo, device_pts).expect("push");
            device_pts += block_frames as i64 * 1_000_000_000 / 48_000;
        }

        let mut pts_list = Vec::new();
        while let Some((_, pts)) = n.pop_chunk() {
            pts_list.push(pts);
        }
        assert!(
            pts_list.len() >= 5,
            "need enough chunks: {}",
            pts_list.len()
        );

        // 20ms = 20_000_000 ns. Allow ±5% (1e6 ns).
        for w in pts_list.windows(2) {
            let delta = w[1] - w[0];
            assert!(
                delta > 0,
                "PTS must increase strictly: {} -> {}",
                w[0],
                w[1]
            );
            assert!(
                (delta - 20_000_000).abs() <= 1_000_000,
                "adjacent PTS delta is not about 20ms: {delta} ns"
            );
        }
    }

    /// Empty or partial input (less than a multiple of `in_channels`) returns `Ok` without
    /// panicking and produces no chunks (boundary defense).
    #[test]
    fn push_empty_and_subframe_are_noops() {
        let mut n = Normalizer::new(48_000, 2, default_out()).expect("normalizer");
        // Empty input.
        n.push(&[], 0).expect("empty push ok");
        // Only one sample for stereo (2ch) → `in_frames=0`, so return early.
        n.push(&[0.5], 0).expect("subframe push ok");
        assert!(
            n.pop_chunk().is_none(),
            "partial input alone must not produce a chunk"
        );
        assert_eq!(n.buffered_out_frames(), 0);
    }

    /// Zero-frequency (silent DC) input produces all-zero output (verifies the peak/RMS-zero path).
    #[test]
    fn silence_input_yields_zero_output() {
        let mut n = Normalizer::new(48_000, 2, default_out()).expect("normalizer");
        let stereo = vec![0.0f32; CHUNK_FRAMES * 2];
        n.push(&stereo, 0).expect("push");
        let (chunk, _) = n.pop_chunk().expect("one chunk");
        assert!(
            chunk.iter().all(|&s| s == 0.0),
            "silent input must produce silent output"
        );
    }

    // --- Secondary tap (dual output) tests ---

    /// Without a secondary tap, `pop_secondary` always returns `None` and `has_secondary` is false.
    #[test]
    fn no_secondary_tap_by_default() {
        let mut n = Normalizer::new(48_000, 2, default_out()).expect("normalizer");
        assert!(!n.has_secondary());
        assert_eq!(n.secondary_output(), None);
        let stereo = vec![0.1f32; CHUNK_FRAMES * 2];
        n.push(&stereo, 0).expect("push");
        assert!(n.pop_secondary().is_none(), "no secondary tap means None");
    }

    /// Generate primary 48k/stereo and secondary 16k/mono from a single stage 1 pass. Primary
    /// emits 960-frame stereo chunks and secondary emits 320-frame mono chunks, both at about
    /// 50 chunks per second.
    #[test]
    fn dual_output_primary_and_secondary_shapes() {
        let secondary = OutputFormat {
            sample_rate: 16_000,
            channels: 1,
        };
        let mut n = Normalizer::new(48_000, 2, default_out())
            .expect("normalizer")
            .with_secondary(secondary)
            .expect("secondary");
        assert!(n.has_secondary());
        assert_eq!(n.secondary_output(), Some(secondary));

        // Push one second of 48k/stereo in 480-frame blocks.
        let mut pts = 0i64;
        for _ in 0..100 {
            let block = vec![0.2f32; 480 * 2];
            n.push(&block, pts).expect("push");
            pts += 480 * 1_000_000_000 / 48_000;
        }

        let mut primary_chunks = 0usize;
        while let Some((c, _)) = n.pop_chunk() {
            assert_eq!(
                c.len(),
                CHUNK_FRAMES * 2,
                "primary is 48k/stereo = 1920 samples"
            );
            primary_chunks += 1;
        }
        let mut secondary_chunks = 0usize;
        while let Some((c, _)) = n.pop_secondary() {
            assert_eq!(c.len(), 320, "secondary is 16k/mono = 320 samples");
            secondary_chunks += 1;
        }
        assert!(
            (47..=50).contains(&primary_chunks),
            "primary ~50 chunks: {primary_chunks}"
        );
        assert!(
            (47..=50).contains(&secondary_chunks),
            "secondary ~50 chunks: {secondary_chunks}"
        );
    }

    /// Both taps share the PTS axis from the same pushes and increase monotonically with 20ms
    /// between adjacent chunks (each tap has an independent PTS anchor).
    #[test]
    fn dual_output_taps_share_pts_axis() {
        let secondary = OutputFormat {
            sample_rate: 16_000,
            channels: 1,
        };
        let mut n = Normalizer::new(48_000, 2, default_out())
            .expect("normalizer")
            .with_secondary(secondary)
            .expect("secondary");

        let mut device_pts = 1_000_000_000i64;
        for _ in 0..40 {
            let block = vec![0.1f32; 480 * 2];
            n.push(&block, device_pts).expect("push");
            device_pts += 480 * 1_000_000_000 / 48_000;
        }

        let mut primary_pts = Vec::new();
        while let Some((_, p)) = n.pop_chunk() {
            primary_pts.push(p);
        }
        let mut secondary_pts = Vec::new();
        while let Some((_, p)) = n.pop_secondary() {
            secondary_pts.push(p);
        }
        assert!(primary_pts.len() >= 5 && secondary_pts.len() >= 5);
        for w in primary_pts.windows(2) {
            assert!((w[1] - w[0] - 20_000_000).abs() <= 1_000_000);
        }
        for w in secondary_pts.windows(2) {
            assert!((w[1] - w[0] - 20_000_000).abs() <= 1_000_000);
        }
        // The first PTS for both taps starts near the same push origin (within tens of ms).
        assert!(
            (primary_pts[0] - secondary_pts[0]).abs() < 100_000_000,
            "primary and secondary start PTS should be close: {} vs {}",
            primary_pts[0],
            secondary_pts[0]
        );
    }

    // --- InnerProcessor (denoise hook equivalent) and stop flush ---

    /// Test processor: doubles every sample (has no trailing tail).
    struct DoubleProcessor;
    impl InnerProcessor for DoubleProcessor {
        fn process(&mut self, s: &mut [f32]) {
            for x in s.iter_mut() {
                *x *= 2.0;
            }
        }
        fn flush(&mut self) -> Vec<f32> {
            Vec::new()
        }
    }

    /// Test processor: fixed delay line holding `hold` samples (simulates a denoise delay line).
    /// Output is delayed by `hold` samples (the first `hold` are silent). Returns the final
    /// `hold` samples from `flush`.
    struct DelayProcessor {
        held: Vec<f32>,
    }
    impl DelayProcessor {
        fn new(hold: usize) -> Self {
            Self {
                held: vec![0.0; hold],
            }
        }
    }
    impl InnerProcessor for DelayProcessor {
        fn process(&mut self, s: &mut [f32]) {
            self.held.extend_from_slice(s);
            let n = s.len();
            s.copy_from_slice(&self.held[..n]);
            self.held.drain(..n);
        }
        fn flush(&mut self) -> Vec<f32> {
            std::mem::take(&mut self.held)
        }
    }

    /// InnerProcessor is applied to the internal canonical form before the stage 2 split (output
    /// doubles directly on the primary 48k/stereo passthrough path).
    #[test]
    fn inner_processor_applies_before_stage2() {
        let mut n = Normalizer::new(48_000, 2, default_out())
            .expect("normalizer")
            .with_inner_processor(Box::new(DoubleProcessor));
        let stereo: Vec<f32> = (0..CHUNK_FRAMES * 2).map(|i| (i as f32) * 1e-4).collect();
        n.push(&stereo, 0).expect("push");
        let (chunk, _) = n.pop_chunk().expect("one chunk");
        for (i, &s) in chunk.iter().enumerate() {
            assert!(
                (s - stereo[i] * 2.0).abs() < 1e-6,
                "sample {i} should be doubled"
            );
        }
    }

    /// InnerProcessor affects both primary and secondary taps (secondary 16k/mono is also doubled).
    #[test]
    fn inner_processor_affects_both_taps() {
        let secondary = OutputFormat {
            sample_rate: 48_000,
            channels: 2,
        };
        // Set secondary to 48k/stereo (passthrough) so the doubling can be observed directly.
        let mut n = Normalizer::new(48_000, 2, default_out())
            .expect("normalizer")
            .with_secondary(secondary)
            .expect("secondary")
            .with_inner_processor(Box::new(DoubleProcessor));
        let stereo = vec![0.25f32; CHUNK_FRAMES * 2];
        n.push(&stereo, 0).expect("push");
        let (p, _) = n.pop_chunk().expect("primary chunk");
        let (s, _) = n.pop_secondary().expect("secondary chunk");
        assert!(
            p.iter().all(|&x| (x - 0.5).abs() < 1e-6),
            "primary is doubled"
        );
        assert!(
            s.iter().all(|&x| (x - 0.5).abs() < 1e-6),
            "secondary is doubled"
        );
    }

    /// Stop flush feeds the processor's trailing tail so it can be retrieved as the final chunk.
    /// The held portion of the delay-line processor appears in an additional chunk after flush.
    #[test]
    fn stop_flush_emits_processor_tail() {
        // Delay line holding 4 samples (2 stereo frames).
        let mut n = Normalizer::new(48_000, 2, default_out())
            .expect("normalizer")
            .with_inner_processor(Box::new(DelayProcessor::new(4)));
        // Push one chunk of identifiable, non-zero input.
        let stereo: Vec<f32> = (0..CHUNK_FRAMES * 2)
            .map(|i| (i as f32 + 1.0) * 1e-4)
            .collect();
        n.push(&stereo, 0).expect("push");

        // Before flush: one chunk (the first 4 samples are silent due to the delay).
        let (c0, _) = n.pop_chunk().expect("first chunk");
        assert_eq!(c0.len(), CHUNK_FRAMES * 2);
        assert!(
            c0[..4].iter().all(|&x| x == 0.0),
            "first 4 samples should be silent due to the delay"
        );
        assert!(
            n.pop_chunk().is_none(),
            "only one chunk should be available before flush"
        );

        // Flush emits the delay line's final 4 samples in an additional chunk (padded with silence).
        n.flush();
        let (c1, _) = n.pop_chunk().expect("flushed tail chunk");
        assert_eq!(c1.len(), CHUNK_FRAMES * 2, "final chunk is padded to 20ms");
        // The final 4 samples are the last 4 input samples.
        let last4 = &stereo[stereo.len() - 4..];
        for (i, &x) in c1[..4].iter().enumerate() {
            assert!(
                (x - last4[i]).abs() < 1e-6,
                "flush tail should match the end of the input"
            );
        }
    }

    /// Stop flush also drains the secondary tap's stage 2 resampler remainder (the tail reaches
    /// 16k/mono output too).
    #[test]
    fn stop_flush_drains_secondary_resampler() {
        let secondary = OutputFormat {
            sample_rate: 16_000,
            channels: 1,
        };
        let mut n = Normalizer::new(48_000, 2, default_out())
            .expect("normalizer")
            .with_secondary(secondary)
            .expect("secondary");
        // Push an amount just under one chunk (leaving a remainder in the resampler).
        let stereo = vec![0.3f32; CHUNK_FRAMES * 2];
        n.push(&stereo, 0).expect("push");

        // Count secondary chunks available before flush.
        let mut before = 0usize;
        while n.pop_secondary().is_some() {
            before += 1;
        }
        n.flush();
        // Flush drains the remainder, adding at least one final chunk.
        let mut after = 0usize;
        while let Some((c, _)) = n.pop_secondary() {
            assert_eq!(c.len(), 320, "secondary aligns to the fixed 20ms boundary");
            after += 1;
        }
        assert!(after >= 1, "flush should emit the secondary tap's tail");
        let _ = before;
    }
}