filament-cli 0.6.3

// The output layer, every styled byte goes through here, nowhere else.
//
// Capability detection happens ONCE; everything degrades in order:
//   truecolor -> ansi-256 -> mono;  unicode -> ascii;  tty -> plain pipe mode
// Pipe mode emits zero ANSI, zero \r redraws, zero spinners: appendable lines
// only, so logs and scripts stay clean. NO_COLOR and TERM=dumb are honored.

use std::io::{IsTerminal, Write};
use std::sync::atomic::{AtomicBool, AtomicU8, Ordering};
use std::sync::OnceLock;
use std::time::Instant;

// ------------------------------------------------------------- verbosity --
// One global output LEVEL, resolved once at startup. The default is `info`:
// the normal useful lines print, the resilience firehose (debug/trace) is
// gated, and the value-prop lines (route label, relay banner, P1 fall-to-relay,
// P5 upgrade, fatals) are `critical` so they survive even `-q`.
//
//   critical(0), always shown, even under -q. The value-prop + must-see.
//   info(1)    : DEFAULT. The normal useful lines (connection, ✓, transfer).
//   debug(2)   : resilience internals (stall/repair/reconnect/cutover/probe).
//   trace(3)   : ICE candidates, per-frame, signaling/direct-offer detail.

/// Output verbosity levels. Lower = more important / always shown.
#[derive(Clone, Copy, PartialEq, Eq, PartialOrd, Ord, Debug)]
pub enum Level {
    Critical = 0,
    Info = 1,
    Debug = 2,
    Trace = 3,
}

// Stored as the configured ceiling: a line at `lvl` prints iff `lvl <= VERBOSITY`.
// Default = Info (1).
static VERBOSITY: AtomicU8 = AtomicU8::new(Level::Info as u8);

/// Resolve and install the global verbosity ONCE, at startup. Precedence:
///   1. `FILAMENT_LOG=<critical|info|debug|trace>` env, OVERRIDES the flags.
///   2. otherwise the clap flags: `-q/--quiet` -> critical; repeated `-v` raises
///      info -> debug -> trace (count saturates at trace).
///   3. persistent `verbosity` setting (e.g. `filament set verbosity debug`).
/// Call this from `main` right after parsing, before any worker spawns.
pub fn init_verbosity(verbose: u8, quiet: bool) {
    let level = if let Ok(s) = std::env::var("FILAMENT_LOG") {
        match s.trim().to_ascii_lowercase().as_str() {
            "critical" | "crit" | "quiet" | "q" => Level::Critical,
            "info" => Level::Info,
            "debug" | "v" => Level::Debug,
            "trace" | "vv" => Level::Trace,
            _ => resolve_from_flags(verbose, quiet),
        }
    } else if !quiet && verbose == 0 {
        // No CLI override; check persistent setting.
        match crate::settings::get_str("verbosity", None).as_deref() {
            Some("critical" | "crit" | "quiet" | "q") => Level::Critical,
            Some("info") => Level::Info,
            Some("debug" | "v") => Level::Debug,
            Some("trace" | "vv") => Level::Trace,
            _ => Level::Info, // default
        }
    } else {
        resolve_from_flags(verbose, quiet)
    };
    VERBOSITY.store(level as u8, Ordering::Relaxed);
}

fn resolve_from_flags(verbose: u8, quiet: bool) -> Level {
    if quiet {
        return Level::Critical;
    }
    match verbose {
        0 => Level::Info,
        1 => Level::Debug,
        _ => Level::Trace,
    }
}

/// The currently configured verbosity ceiling.
#[allow(dead_code)] // public accessor; callers use `enabled()` today
pub fn verbosity() -> Level {
    match VERBOSITY.load(Ordering::Relaxed) {
        0 => Level::Critical,
        1 => Level::Info,
        2 => Level::Debug,
        _ => Level::Trace,
    }
}

/// True iff a line at `lvl` should print under the configured verbosity.
pub fn enabled(lvl: Level) -> bool {
    (lvl as u8) <= VERBOSITY.load(Ordering::Relaxed)
}

pub struct Caps {
    pub tty: bool,
    pub color: bool,
    pub truecolor: bool,
    pub unicode: bool,
}

pub fn caps() -> &'static Caps {
    static C: OnceLock<Caps> = OnceLock::new();
    C.get_or_init(|| {
        let tty = std::io::stderr().is_terminal();
        let term = std::env::var("TERM").unwrap_or_default();
        let color = match std::env::var("FILAMENT_COLOR").as_deref() {
            Ok("always") => true,
            Ok("never") => false,
            _ => tty && std::env::var_os("NO_COLOR").is_none() && term != "dumb",
        };
        let truecolor = color
            && std::env::var("COLORTERM")
                .map(|v| v.contains("truecolor") || v.contains("24bit"))
                .unwrap_or(false);
        let unicode = std::env::var("LC_ALL")
            .or_else(|_| std::env::var("LC_CTYPE"))
            .or_else(|_| std::env::var("LANG"))
            .map(|v| v.to_uppercase().contains("UTF"))
            .unwrap_or(cfg!(windows)); // Windows Terminal is UTF-16 native
        Caps { tty, color, truecolor, unicode }
    })
}

// ------------------------------------------------------------------ paint --

#[derive(Clone, Copy)]
pub enum Tone {
    /// the brand: filament green (#7CF6C8)
    Brand,
    Ok,
    Err,
    Warn,
    Dim,
    Bold,
}

fn ansi_code(tone: Tone, truecolor: bool) -> &'static str {
    match tone {
        Tone::Brand if truecolor => "\x1b[1;38;2;124;246;200m",
        Tone::Brand => "\x1b[1;92m",
        Tone::Ok => "\x1b[32m",
        Tone::Err => "\x1b[31m",
        Tone::Warn => "\x1b[33m",
        Tone::Dim => "\x1b[2m",
        Tone::Bold => "\x1b[1m",
    }
}

pub fn paint(tone: Tone, s: &str) -> String {
    let c = caps();
    if !c.color {
        return s.to_string();
    }
    format!("{}{s}\x1b[0m", ansi_code(tone, c.truecolor))
}

/// Color decision for STDOUT specifically (the `set`/`get` readout surface).
/// `caps()` is stderr-scoped; stdout must be judged on its OWN tty-ness so that
/// piped output never carries ANSI (clig.dev: humans first, machines second).
/// Same env contract as `caps()`: NO_COLOR, TERM=dumb, FILAMENT_COLOR=never|always.
pub fn stdout_color() -> bool {
    match std::env::var("FILAMENT_COLOR").as_deref() {
        Ok("never") => return false,
        Ok("always") => return true,
        _ => {}
    }
    std::io::stdout().is_terminal()
        && std::env::var_os("NO_COLOR").is_none()
        && std::env::var("TERM").as_deref() != Ok("dumb")
}

/// Paint for an explicit color decision (used for stdout, where consulting the
/// stderr-scoped `caps()` would pick the wrong stream).
pub fn paint_when(color: bool, tone: Tone, s: &str) -> String {
    if !color {
        return s.to_string();
    }
    let truecolor = std::env::var("COLORTERM")
        .map(|v| v.contains("truecolor") || v.contains("24bit"))
        .unwrap_or(false);
    format!("{}{s}\x1b[0m", ansi_code(tone, truecolor))
}

pub fn glyph_ok() -> &'static str {
    if caps().unicode { "✓" } else { "ok" }
}
#[allow(dead_code)] // part of the glyph set; error paths adopt it next
pub fn glyph_err() -> &'static str {
    if caps().unicode { "✗" } else { "x" }
}
pub fn glyph_arrow() -> &'static str {
    if caps().unicode { "→" } else { "->" }
}

/// OSC 8 hyperlink (clickable in modern terminals); plain text elsewhere.
pub fn link(url: &str, text: &str) -> String {
    if caps().color {
        format!("\x1b]8;;{url}\x1b\\{text}\x1b]8;;\x1b\\")
    } else {
        text.to_string()
    }
}

/// OSC 52: put `s` on the terminal's clipboard (silently unsupported in some
/// terminals; harmless there). Only on a tty.
pub fn clipboard(s: &str) {
    use base64_mini::enc;
    if caps().tty {
        eprint!("\x1b]52;c;{}\x07", enc(s.as_bytes()));
    }
}

mod base64_mini {
    const T: &[u8; 64] = b"ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/";
    pub fn enc(d: &[u8]) -> String {
        let mut out = String::with_capacity(d.len().div_ceil(3) * 4);
        for ch in d.chunks(3) {
            let b = [ch[0], *ch.get(1).unwrap_or(&0), *ch.get(2).unwrap_or(&0)];
            let n = u32::from_be_bytes([0, b[0], b[1], b[2]]);
            out.push(T[(n >> 18) as usize & 63] as char);
            out.push(T[(n >> 12) as usize & 63] as char);
            out.push(if ch.len() > 1 { T[(n >> 6) as usize & 63] as char } else { '=' });
            out.push(if ch.len() > 2 { T[n as usize & 63] as char } else { '=' });
        }
        out
    }
}

// ----------------------------------------------------------------- status --
// One living line on stderr, redrawn in place on a tty; on a pipe, nothing
// until a final say()/done() line. Spinner frames are braille.

static LIVE: AtomicBool = AtomicBool::new(false);

fn clear_live() {
    if LIVE.swap(false, Ordering::Relaxed) && caps().tty {
        eprint!("\r\x1b[2K");
    }
}

// Sticky status (C22): an open question or countdown survives interleaved
// say() lines, async events (route detection, peer chatter) print ABOVE it
// and the sticky line is repainted, instead of clobbering a half-typed
// prompt (observed live: "accept? [y/N]     route: direct").
static STICKY: std::sync::Mutex<Option<String>> = std::sync::Mutex::new(None);

fn paint_live(line: &str) {
    clear_live();
    eprint!("{line}");
    let _ = std::io::stderr().flush();
    LIVE.store(true, Ordering::Relaxed);
}

/// Permanent line (survives in scrollback); repaints any sticky line below.
/// The raw emitter, every leveled helper funnels through here once it has
/// decided the line is in-budget. Use the leveled helpers (`critical`/`say`/
/// `debug`/`trace`) at call sites so the verbosity gate is applied.
fn emit(line: &str) {
    clear_live();
    eprintln!("{line}");
    if let Ok(s) = STICKY.lock() {
        if let Some(st) = s.as_ref() {
            if caps().tty {
                paint_live(st);
            }
        }
    }
}

/// INFO level (the default): the normal useful lines, connection established,
/// ✓ peer / route, transfer started/complete, pairing success. Printed at the
/// default verbosity and above; suppressed under `-q`.
pub fn say(line: &str) {
    if enabled(Level::Info) {
        emit(line);
    }
}

/// CRITICAL level: the value-prop + must-see lines, the route label, the relay
/// banner, P1's fall-to-relay, P5's upgrade/relay-released, and fatal errors.
/// ALWAYS printed, even under `-q` (critical is level 0).
pub fn critical(line: &str) {
    if enabled(Level::Critical) {
        emit(line);
    }
}

/// A structured, must-see PROBLEM block, for an error the user has to act on.
/// Instead of one dense sentence, it breaks the message into a red `✗` headline,
/// an optional one-line explanation, and a list of concrete next steps - far
/// easier to scan than a wall of prose. Each line rides the CRITICAL channel
/// (always shown, even under `-q`) and `paint()` (color only on a tty, clean in a
/// pipe). Steps are pre-formatted by the caller, so a step may embed a command in
/// the brand accent, e.g. `paint(Tone::Brand, "filament pty box")`.
pub fn problem(headline: &str, detail: &str, steps: &[String]) {
    critical(&format!("{} {}", paint(Tone::Err, "✗"), paint(Tone::Bold, headline)));
    if !detail.is_empty() {
        critical(&format!("  {detail}"));
    }
    if !steps.is_empty() {
        critical(&format!("  {}", paint(Tone::Dim, "try one of:")));
        for s in steps {
            critical(&format!("    {} {s}", paint(Tone::Brand, "•")));
        }
    }
}

/// DEBUG level (`-v`): resilience internals, stall detected, resuming, in-place
/// repair, signaling reconnecting/reconnected, warm cutover, upgrade-probe
/// attempts. No-op at the default level.
pub fn debug(line: &str) {
    if enabled(Level::Debug) {
        emit(line);
    }
}

/// TRACE level (`-vv` / `FILAMENT_LOG=trace`): ICE candidates, per-frame,
/// signaling / direct-offer detail. No-op below trace.
pub fn trace(line: &str) {
    if enabled(Level::Trace) {
        emit(line);
    }
}

/// Transient line: replaced by the next say()/status()/bar tick. No-op noise
/// on pipes (suppressed entirely). An open STICKY (a question awaiting its
/// keypress) outranks transients, progress bars wait their turn rather than
/// hiding the question (C23: users answered questions they couldn't see).
pub fn status(line: &str) {
    if !caps().tty {
        return;
    }
    if let Ok(s) = STICKY.lock() {
        if s.is_some() {
            return;
        }
    }
    paint_live(line);
}

/// Echo a single-key answer cleanly (raw mode disables terminal echo, and a
/// bare eprint would land inside whatever transient line is on screen).
pub fn answer_echo(c: char) {
    clear_live();
    eprintln!("  {} {}", paint(Tone::Dim, "↳"), paint(Tone::Bold, &c.to_string()));
}

/// A status line that survives interleaved say()s until cleared, for open
/// questions and countdowns.
pub fn sticky(line: &str) {
    if let Ok(mut s) = STICKY.lock() {
        *s = Some(line.to_string());
    }
    status(line);
}

pub fn clear_sticky() {
    let had = STICKY.lock().map(|mut s| s.take().is_some()).unwrap_or(false);
    if had && caps().tty {
        clear_live();
    }
}

pub fn spinner_frame() -> char {
    const U: [char; 8] = ['⠋', '⠙', '⠹', '⠸', '⠼', '⠴', '⠦', '⠧'];
    const A: [char; 4] = ['|', '/', '-', '\\'];
    let t = (Instant::now().elapsed().as_millis() / 80) as usize; // monotonic-ish
    if caps().unicode { U[t % 8] } else { A[t % 4] }
}

// ------------------------------------------------------------- progress bar --

pub struct Progress {
    label: String,
    total: u64,
    started: Instant,
    rate_ema: f64,
    last_draw: Instant,
    last_bytes: u64,
}

impl Progress {
    pub fn new(label: &str, total: u64) -> Progress {
        Progress {
            label: label.to_string(),
            total,
            started: Instant::now(),
            rate_ema: 0.0,
            last_draw: Instant::now() - std::time::Duration::from_secs(1),
            last_bytes: 0,
        }
    }

    /// Thin filament-style bar: done in brand green (━), boundary ╸, rest dim.
    pub fn tick(&mut self, bytes: u64) {
        let now = Instant::now();
        if now.duration_since(self.last_draw).as_millis() < 100 {
            return;
        }
        let dt = now.duration_since(self.last_draw).as_secs_f64();
        let inst = (bytes.saturating_sub(self.last_bytes)) as f64 / dt.max(0.001);
        // EMA so the rate reads steady instead of jittering every frame
        self.rate_ema = if self.rate_ema == 0.0 { inst } else { 0.85 * self.rate_ema + 0.15 * inst };
        self.last_draw = now;
        self.last_bytes = bytes;
        if !caps().tty {
            return;
        }
        let frac = (bytes as f64 / self.total.max(1) as f64).min(1.0);
        let width = 22usize;
        let filled = (frac * width as f64) as usize;
        let bar = if caps().unicode {
            let done = "━".repeat(filled.min(width));
            let edge = if filled < width { "╸" } else { "" };
            let rest = "─".repeat(width - filled - if filled < width { 1 } else { 0 });
            format!("{}{}{}", paint(Tone::Brand, &done), paint(Tone::Brand, edge), paint(Tone::Dim, &rest))
        } else {
            let done = "=".repeat(filled.min(width));
            let rest = "-".repeat(width - filled);
            format!("{done}{rest}")
        };
        let eta = if self.rate_ema > 1.0 && bytes < self.total {
            let s = ((self.total - bytes) as f64 / self.rate_ema) as u64;
            format!("{}:{:02}", s / 60, s % 60)
        } else {
            "-:--".into()
        };
        status(&format!(
            "  {}  {}  {}  {}  {}",
            self.label,
            bar,
            paint(Tone::Bold, &format!("{:>3.0}%", frac * 100.0)),
            paint(Tone::Dim, &format!("{}/s", crate::human(self.rate_ema as u64))),
            paint(Tone::Dim, &eta),
        ));
    }

    /// Final summary line; rings the bell (opt-in via tty) for long transfers.
    pub fn done(&self, bytes: u64) {
        let secs = self.started.elapsed().as_secs_f64().max(0.001);
        let rate = bytes as f64 / secs;
        say(&format!(
            "  {} {}  {}",
            paint(Tone::Ok, glyph_ok()),
            self.label,
            paint(Tone::Dim, &format!("{} · {}/s", crate::human(bytes), crate::human(rate as u64))),
        ));
        if caps().tty && secs > 30.0 {
            eprint!("\x07");
        }
    }
}

// ------------------------------------------------------------- table / align --

/// A simple column-aligned table for status displays. Respects TTY/color gating.
///
/// Usage:
/// ```
/// let mut table = ui::Table::new(&["NAME", "ADDRESS", "LAST SEEN"]);
/// table.row(&[&name, &addr, &last_seen]);
/// table.print();
/// ```
pub struct Table {
    headers: Vec<String>,
    rows: Vec<Vec<String>>,
    widths: Vec<usize>,
}

impl Table {
    /// Create a new table with column headers.
    pub fn new(headers: &[&str]) -> Self {
        let widths: Vec<usize> = headers.iter().map(|h| h.len()).collect();
        Table {
            headers: headers.iter().map(|s| s.to_string()).collect(),
            rows: Vec::new(),
            widths,
        }
    }

    /// Add a row to the table. Column widths auto-expand as needed.
    pub fn row(&mut self, cells: &[&str]) {
        let row: Vec<String> = cells.iter().map(|s| s.to_string()).collect();
        for (i, cell) in row.iter().enumerate() {
            if i < self.widths.len() {
                self.widths[i] = self.widths[i].max(cell.len());
            }
        }
        self.rows.push(row);
    }

    /// Format a single row with padded columns.
    fn format_row(&self, cells: &[String], is_header: bool) -> String {
        let mut parts = Vec::new();
        for (i, cell) in cells.iter().enumerate() {
            let width = self.widths.get(i).copied().unwrap_or(cell.len());
            let padded = format!("{:<width$}", cell, width = width);
            if is_header && caps().tty {
                parts.push(paint(Tone::Dim, &padded));
            } else {
                parts.push(padded);
            }
        }
        parts.join("  ")
    }

    /// Print the table to stdout.
    pub fn print(&self) {
        // Header
        println!("{}", self.format_row(&self.headers, true));
        // Rows
        for row in &self.rows {
            println!("{}", self.format_row(row, false));
        }
    }

    /// Check if the table is empty.
    pub fn is_empty(&self) -> bool {
        self.rows.is_empty()
    }
}

// --------------------------------------------------------------------- QR --

/// Render a QR code in half-height blocks (2 modules per char row). Empty
/// string when unicode is unavailable.
pub fn qr(url: &str) -> String {
    if !caps().unicode {
        return String::new();
    }
    let Ok(code) = qrcode::QrCode::new(url.as_bytes()) else {
        return String::new();
    };
    let w = code.width();
    let get = |x: i32, y: i32| -> bool {
        if x < 0 || y < 0 || x >= w as i32 || y >= w as i32 {
            false
        } else {
            code[(x as usize, y as usize)] == qrcode::Color::Dark
        }
    };
    let mut out = String::new();
    let q = 2; // quiet zone
    let mut y = -q;
    while y < w as i32 + q {
        out.push_str("         ");
        for x in -q..w as i32 + q {
            out.push(match (get(x, y), get(x, y + 1)) {
                (true, true) => '█',
                (true, false) => '▀',
                (false, true) => '▄',
                (false, false) => ' ',
            });
        }
        out.push('\n');
        y += 2;
    }
    out
}

#[cfg(test)]
mod verbosity_tests {
    use super::*;

    #[test]
    fn flags_map_to_levels() {
        // -q wins → critical; no flags → info; -v → debug; -vv (and up) → trace.
        assert_eq!(resolve_from_flags(0, true), Level::Critical);
        assert_eq!(resolve_from_flags(2, true), Level::Critical); // quiet beats -v count
        assert_eq!(resolve_from_flags(0, false), Level::Info);
        assert_eq!(resolve_from_flags(1, false), Level::Debug);
        assert_eq!(resolve_from_flags(2, false), Level::Trace);
        assert_eq!(resolve_from_flags(9, false), Level::Trace); // saturates
    }

    #[test]
    fn enabled_respects_ceiling() {
        // At the default (info) ceiling, critical+info print; debug+trace gated.
        VERBOSITY.store(Level::Info as u8, Ordering::Relaxed);
        assert!(enabled(Level::Critical));
        assert!(enabled(Level::Info));
        assert!(!enabled(Level::Debug));
        assert!(!enabled(Level::Trace));

        // Under -q (critical), only critical prints.
        VERBOSITY.store(Level::Critical as u8, Ordering::Relaxed);
        assert!(enabled(Level::Critical));
        assert!(!enabled(Level::Info));
        assert!(!enabled(Level::Debug));

        // Under -v (debug), critical+info+debug print, trace still gated.
        VERBOSITY.store(Level::Debug as u8, Ordering::Relaxed);
        assert!(enabled(Level::Critical));
        assert!(enabled(Level::Info));
        assert!(enabled(Level::Debug));
        assert!(!enabled(Level::Trace));

        // restore default for any later same-process readers.
        VERBOSITY.store(Level::Info as u8, Ordering::Relaxed);
    }
}