Trait esp8266::generic::Resettable[−][src]

pub trait Resettable: RegisterSpec {
    fn reset_value() -> Self::Ux;
}
Expand description

Reset value of the register.

This value is the initial value for the write method. It can also be directly written to the register by using the reset method.

Required methods

Reset value of the register.

Implementors

reset() method sets DPORT_CTL to value 0

reset() method sets EDGE_INT_ENABLE to value 0

reset() method sets IOSWAP to value 0

reset() method sets SPI_CACHE to value 0

reset() method sets SPI_CACHE_TARGET to value 0

reset() method sets SPI_INTERRUPT_TYPE to value 0

reset() method sets EFUSE_DATA0 to value 0

reset() method sets EFUSE_DATA1 to value 0

reset() method sets EFUSE_DATA2 to value 0

reset() method sets EFUSE_DATA3 to value 0

reset() method sets GPIO_ENABLE to value 0

reset() method sets GPIO_ENABLE_W1TC to value 0

reset() method sets GPIO_ENABLE_W1TS to value 0

reset() method sets GPIO_IN to value 0

reset() method sets GPIO_OUT to value 0

reset() method sets GPIO_OUT_W1TC to value 0

reset() method sets GPIO_OUT_W1TS to value 0

reset() method sets GPIO_PIN0 to value 0

reset() method sets GPIO_PIN1 to value 0

reset() method sets GPIO_PIN2 to value 0

reset() method sets GPIO_PIN3 to value 0

reset() method sets GPIO_PIN4 to value 0

reset() method sets GPIO_PIN5 to value 0

reset() method sets GPIO_PIN6 to value 0

reset() method sets GPIO_PIN7 to value 0

reset() method sets GPIO_PIN8 to value 0

reset() method sets GPIO_PIN9 to value 0

reset() method sets GPIO_PIN10 to value 0

reset() method sets GPIO_PIN11 to value 0

reset() method sets GPIO_PIN12 to value 0

reset() method sets GPIO_PIN13 to value 0

reset() method sets GPIO_PIN14 to value 0

reset() method sets GPIO_PIN15 to value 0

reset() method sets GPIO_RTC_CALIB_SYNC to value 0

reset() method sets GPIO_RTC_CALIB_VALUE to value 0

reset() method sets GPIO_SIGMA_DELTA to value 0

reset() method sets GPIO_STATUS to value 0

reset() method sets GPIO_STATUS_W1TC to value 0

reset() method sets GPIO_STATUS_W1TS to value 0

reset() method sets I2S_FIFO_CONF to value 0

reset() method sets I2SCONF to value 0

reset() method sets I2SCONF_SIGLE_DATA to value 0

reset() method sets I2SINT_CLR to value 0

reset() method sets I2SINT_ENA to value 0

reset() method sets I2SINT_RAW to value 0

reset() method sets I2SINT_ST to value 0

reset() method sets I2SRXEOF_NUM to value 0

reset() method sets I2SRXFIFO to value 0

reset() method sets I2STIMING to value 0

reset() method sets I2STXFIFO to value 0

reset() method sets IO_MUX_CONF to value 0

reset() method sets IO_MUX_GPIO0 to value 0

reset() method sets IO_MUX_GPIO2 to value 0

reset() method sets IO_MUX_GPIO4 to value 0

reset() method sets IO_MUX_GPIO5 to value 0

reset() method sets IO_MUX_MTCK to value 0

reset() method sets IO_MUX_MTDI to value 0

reset() method sets IO_MUX_MTDO to value 0

reset() method sets IO_MUX_MTMS to value 0

reset() method sets IO_MUX_SD_CLK to value 0

reset() method sets IO_MUX_SD_CMD to value 0

reset() method sets IO_MUX_SD_DATA0 to value 0

reset() method sets IO_MUX_SD_DATA1 to value 0

reset() method sets IO_MUX_SD_DATA2 to value 0

reset() method sets IO_MUX_SD_DATA3 to value 0

reset() method sets IO_MUX_U0RXD to value 0

reset() method sets IO_MUX_U0TXD to value 0

reset() method sets rng to value 0

reset() method sets PAD_XPD_DCDC_CONF to value 0

reset() method sets RTC_GPIO_CONF to value 0

reset() method sets RTC_GPIO_ENABLE to value 0

reset() method sets RTC_GPIO_IN_DATA to value 0

reset() method sets RTC_GPIO_OUT to value 0

reset() method sets RTC_STATE1 to value 0

reset() method sets RTC_STORE0 to value 0

reset() method sets PLL to value 0

reset() method sets SLC_AHB_TEST to value 0

reset() method sets SLC_BRIDGE_CONF to value 0

reset() method sets SLC_CONF0 to value 0

reset() method sets SLC_CONF1 to value 0

reset() method sets SLC_DATE to value 0

reset() method sets SLC_ID to value 0

reset() method sets SLC_INT_CLR to value 0

reset() method sets SLC_INT_ENA to value 0

reset() method sets SLC_INT_RAW to value 0

reset() method sets SLC_INT_STATUS to value 0

reset() method sets SLC_INTVEC_TOHOST to value 0

reset() method sets SLC_RX_DSCR_CONF to value 0

reset() method sets SLC_RX_EOF_BFR_DES_ADDR to value 0

reset() method sets SLC_RX_EOF_DES_ADDR to value 0

reset() method sets SLC_RX_FIFO_PUSH to value 0

reset() method sets SLC_RX_LINK to value 0

reset() method sets SLC_RX_STATUS to value 0

reset() method sets SLC_RXLINK_DSCR to value 0

reset() method sets SLC_RXLINK_DSCR_BF0 to value 0

reset() method sets SLC_RXLINK_DSCR_BF1 to value 0

reset() method sets SLC_SDIO_ST to value 0

reset() method sets SLC_STATE0 to value 0

reset() method sets SLC_STATE1 to value 0

reset() method sets SLC_TOKEN0 to value 0

reset() method sets SLC_TOKEN1 to value 0

reset() method sets SLC_TX_EOF_DES_ADDR to value 0

reset() method sets SLC_TX_FIFO_POP to value 0

reset() method sets SLC_TX_LINK to value 0

reset() method sets SLC_TX_STATUS to value 0

reset() method sets SLC_TXLINK_DSCR to value 0

reset() method sets SLC_TXLINK_DSCR_BF0 to value 0

reset() method sets SLC_TXLINK_DSCR_BF1 to value 0

reset() method sets SPI_ADDR to value 0

reset() method sets SPI_CLOCK to value 0

reset() method sets SPI_CMD to value 0

reset() method sets SPI_CTRL1 to value 0

reset() method sets SPI_CTRL2 to value 0

reset() method sets SPI_CTRL to value 0

reset() method sets SPI_EXT0 to value 0

reset() method sets SPI_EXT1 to value 0

reset() method sets SPI_EXT2 to value 0

reset() method sets SPI_EXT3 to value 0

reset() method sets SPI_PIN to value 0

reset() method sets SPI_RD_STATUS to value 0

reset() method sets SPI_SLAVE1 to value 0

reset() method sets SPI_SLAVE2 to value 0

reset() method sets SPI_SLAVE3 to value 0

reset() method sets SPI_SLAVE to value 0

reset() method sets SPI_USER1 to value 0

reset() method sets SPI_USER2 to value 0

reset() method sets SPI_USER to value 0

reset() method sets SPI_W0 to value 0

reset() method sets SPI_W1 to value 0

reset() method sets SPI_W2 to value 0

reset() method sets SPI_W3 to value 0

reset() method sets SPI_W4 to value 0

reset() method sets SPI_W5 to value 0

reset() method sets SPI_W6 to value 0

reset() method sets SPI_W7 to value 0

reset() method sets SPI_W8 to value 0

reset() method sets SPI_W9 to value 0

reset() method sets SPI_W10 to value 0

reset() method sets SPI_W11 to value 0

reset() method sets SPI_W12 to value 0

reset() method sets SPI_W13 to value 0

reset() method sets SPI_W14 to value 0

reset() method sets SPI_W15 to value 0

reset() method sets SPI_WR_STATUS to value 0

reset() method sets SPI_ADDR to value 0

reset() method sets SPI_CLOCK to value 0

reset() method sets SPI_CMD to value 0

reset() method sets SPI_CTRL1 to value 0

reset() method sets SPI_CTRL2 to value 0

reset() method sets SPI_CTRL to value 0

reset() method sets SPI_EXT0 to value 0

reset() method sets SPI_EXT1 to value 0

reset() method sets SPI_EXT2 to value 0

reset() method sets SPI_EXT3 to value 0

reset() method sets SPI_PIN to value 0

reset() method sets SPI_RD_STATUS to value 0

reset() method sets SPI_SLAVE1 to value 0

reset() method sets SPI_SLAVE2 to value 0

reset() method sets SPI_SLAVE3 to value 0

reset() method sets SPI_SLAVE to value 0

reset() method sets SPI_USER1 to value 0

reset() method sets SPI_USER2 to value 0

reset() method sets SPI_USER to value 0

reset() method sets SPI_W0 to value 0

reset() method sets SPI_W1 to value 0

reset() method sets SPI_W2 to value 0

reset() method sets SPI_W3 to value 0

reset() method sets SPI_W4 to value 0

reset() method sets SPI_W5 to value 0

reset() method sets SPI_W6 to value 0

reset() method sets SPI_W7 to value 0

reset() method sets SPI_W8 to value 0

reset() method sets SPI_W9 to value 0

reset() method sets SPI_W10 to value 0

reset() method sets SPI_W11 to value 0

reset() method sets SPI_W12 to value 0

reset() method sets SPI_W13 to value 0

reset() method sets SPI_W14 to value 0

reset() method sets SPI_W15 to value 0

reset() method sets SPI_WR_STATUS to value 0

reset() method sets FRC1_COUNT to value 0

reset() method sets FRC1_CTRL to value 0

reset() method sets FRC1_INT to value 0

reset() method sets FRC1_LOAD to value 0

reset() method sets FRC2_ALARM to value 0

reset() method sets FRC2_COUNT to value 0

reset() method sets FRC2_CTRL to value 0

reset() method sets FRC2_INT to value 0

reset() method sets FRC2_LOAD to value 0

reset() method sets UART_AUTOBAUD to value 0

reset() method sets UART_CLKDIV to value 0

reset() method sets UART_CONF0 to value 0

reset() method sets UART_CONF1 to value 0

reset() method sets UART_DATE to value 0

reset() method sets UART_FIFO to value 0

reset() method sets UART_HIGHPULSE to value 0

reset() method sets UART_ID to value 0

reset() method sets UART_INT_CLR to value 0

reset() method sets UART_INT_ENA to value 0

reset() method sets UART_INT_RAW to value 0

reset() method sets UART_INT_ST to value 0

reset() method sets UART_LOWPULSE to value 0

reset() method sets UART_RXD_CNT to value 0

reset() method sets UART_STATUS to value 0

reset() method sets UART_AUTOBAUD to value 0

reset() method sets UART_CLKDIV to value 0

reset() method sets UART_CONF0 to value 0

reset() method sets UART_CONF1 to value 0

reset() method sets UART_DATE to value 0

reset() method sets UART_FIFO to value 0

reset() method sets UART_HIGHPULSE to value 0

reset() method sets UART_ID to value 0

reset() method sets UART_INT_CLR to value 0

reset() method sets UART_INT_ENA to value 0

reset() method sets UART_INT_RAW to value 0

reset() method sets UART_INT_ST to value 0

reset() method sets UART_LOWPULSE to value 0

reset() method sets UART_RXD_CNT to value 0

reset() method sets UART_STATUS to value 0

reset() method sets count to value 0

reset() method sets reset_stage to value 0

reset() method sets stage to value 0

reset() method sets WDT_CTL to value 0

reset() method sets WDT_OP to value 0

reset() method sets WDT_OP_ND to value 0

reset() method sets WDT_RST to value 0