Module mem_conf

UART threshold and allocation configuration

Structs

MEM_CONF_SPEC

UART threshold and allocation configuration

Type Aliases

MEM_FORCE_PD_R

Field MEM_FORCE_PD reader - Set this bit to force power down UART memory.

MEM_FORCE_PD_W

Field MEM_FORCE_PD writer - Set this bit to force power down UART memory.

MEM_FORCE_PU_R

Field MEM_FORCE_PU reader - Set this bit to force power up UART memory.

MEM_FORCE_PU_W

Field MEM_FORCE_PU writer - Set this bit to force power up UART memory.

R

Register MEM_CONF reader

RX_FLOW_THRHD_R

Field RX_FLOW_THRHD reader - This register is used to configure the maximum amount of data that can be received when hardware flow control works.

RX_FLOW_THRHD_W

Field RX_FLOW_THRHD writer - This register is used to configure the maximum amount of data that can be received when hardware flow control works.

RX_SIZE_R

Field RX_SIZE reader - This register is used to configure the amount of mem allocated for receive-FIFO. The default number is 128 bytes.

RX_SIZE_W

Field RX_SIZE writer - This register is used to configure the amount of mem allocated for receive-FIFO. The default number is 128 bytes.

RX_TOUT_THRHD_R

Field RX_TOUT_THRHD reader - This register is used to configure the threshold time that receiver takes to receive one byte. The rxfifo_tout_int interrupt will be trigger when the receiver takes more time to receive one byte with rx_tout_en set to 1.

RX_TOUT_THRHD_W

Field RX_TOUT_THRHD writer - This register is used to configure the threshold time that receiver takes to receive one byte. The rxfifo_tout_int interrupt will be trigger when the receiver takes more time to receive one byte with rx_tout_en set to 1.

TX_SIZE_R

Field TX_SIZE reader - This register is used to configure the amount of mem allocated for transmit-FIFO. The default number is 128 bytes.

TX_SIZE_W

Field TX_SIZE writer - This register is used to configure the amount of mem allocated for transmit-FIFO. The default number is 128 bytes.

W

Register MEM_CONF writer