#[doc = "Register `INT_ENA` reader"]
pub type R = crate::R<INT_ENA_SPEC>;
#[doc = "Register `INT_ENA` writer"]
pub type W = crate::W<INT_ENA_SPEC>;
#[doc = "Field `SLP_WAKEUP` reader - enable sleep wakeup interrupt"]
pub type SLP_WAKEUP_R = crate::BitReader;
#[doc = "Field `SLP_WAKEUP` writer - enable sleep wakeup interrupt"]
pub type SLP_WAKEUP_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `SLP_REJECT` reader - enable sleep reject interrupt"]
pub type SLP_REJECT_R = crate::BitReader;
#[doc = "Field `SLP_REJECT` writer - enable sleep reject interrupt"]
pub type SLP_REJECT_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `SDIO_IDLE` reader - enable SDIO idle interrupt"]
pub type SDIO_IDLE_R = crate::BitReader;
#[doc = "Field `SDIO_IDLE` writer - enable SDIO idle interrupt"]
pub type SDIO_IDLE_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `WDT` reader - enable RTC WDT interrupt"]
pub type WDT_R = crate::BitReader;
#[doc = "Field `WDT` writer - enable RTC WDT interrupt"]
pub type WDT_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `TOUCH_SCAN_DONE` reader - enable touch scan done interrupt"]
pub type TOUCH_SCAN_DONE_R = crate::BitReader;
#[doc = "Field `TOUCH_SCAN_DONE` writer - enable touch scan done interrupt"]
pub type TOUCH_SCAN_DONE_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `ULP_CP` reader - enable ULP-coprocessor interrupt"]
pub type ULP_CP_R = crate::BitReader;
#[doc = "Field `ULP_CP` writer - enable ULP-coprocessor interrupt"]
pub type ULP_CP_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `TOUCH_DONE` reader - enable touch done interrupt"]
pub type TOUCH_DONE_R = crate::BitReader;
#[doc = "Field `TOUCH_DONE` writer - enable touch done interrupt"]
pub type TOUCH_DONE_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `TOUCH_ACTIVE` reader - enable touch active interrupt"]
pub type TOUCH_ACTIVE_R = crate::BitReader;
#[doc = "Field `TOUCH_ACTIVE` writer - enable touch active interrupt"]
pub type TOUCH_ACTIVE_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `TOUCH_INACTIVE` reader - enable touch inactive interrupt"]
pub type TOUCH_INACTIVE_R = crate::BitReader;
#[doc = "Field `TOUCH_INACTIVE` writer - enable touch inactive interrupt"]
pub type TOUCH_INACTIVE_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `BROWN_OUT` reader - enable brown out interrupt"]
pub type BROWN_OUT_R = crate::BitReader;
#[doc = "Field `BROWN_OUT` writer - enable brown out interrupt"]
pub type BROWN_OUT_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `MAIN_TIMER` reader - enable RTC main timer interrupt"]
pub type MAIN_TIMER_R = crate::BitReader;
#[doc = "Field `MAIN_TIMER` writer - enable RTC main timer interrupt"]
pub type MAIN_TIMER_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `SARADC1` reader - enable saradc1 interrupt"]
pub type SARADC1_R = crate::BitReader;
#[doc = "Field `SARADC1` writer - enable saradc1 interrupt"]
pub type SARADC1_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `TSENS` reader - enable tsens interrupt"]
pub type TSENS_R = crate::BitReader;
#[doc = "Field `TSENS` writer - enable tsens interrupt"]
pub type TSENS_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `COCPU` reader - enable riscV cocpu interrupt"]
pub type COCPU_R = crate::BitReader;
#[doc = "Field `COCPU` writer - enable riscV cocpu interrupt"]
pub type COCPU_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `SARADC2` reader - enable saradc2 interrupt"]
pub type SARADC2_R = crate::BitReader;
#[doc = "Field `SARADC2` writer - enable saradc2 interrupt"]
pub type SARADC2_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `SWD` reader - enable super watch dog interrupt"]
pub type SWD_R = crate::BitReader;
#[doc = "Field `SWD` writer - enable super watch dog interrupt"]
pub type SWD_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `XTAL32K_DEAD` reader - enable xtal32k_dead interrupt"]
pub type XTAL32K_DEAD_R = crate::BitReader;
#[doc = "Field `XTAL32K_DEAD` writer - enable xtal32k_dead interrupt"]
pub type XTAL32K_DEAD_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `COCPU_TRAP` reader - enable cocpu trap interrupt"]
pub type COCPU_TRAP_R = crate::BitReader;
#[doc = "Field `COCPU_TRAP` writer - enable cocpu trap interrupt"]
pub type COCPU_TRAP_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `TOUCH_TIMEOUT` reader - enable touch timeout interrupt"]
pub type TOUCH_TIMEOUT_R = crate::BitReader;
#[doc = "Field `TOUCH_TIMEOUT` writer - enable touch timeout interrupt"]
pub type TOUCH_TIMEOUT_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `GLITCH_DET` reader - enbale gitch det interrupt"]
pub type GLITCH_DET_R = crate::BitReader;
#[doc = "Field `GLITCH_DET` writer - enbale gitch det interrupt"]
pub type GLITCH_DET_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `TOUCH_APPROACH_LOOP_DONE` reader - touch approach mode loop interrupt"]
pub type TOUCH_APPROACH_LOOP_DONE_R = crate::BitReader;
#[doc = "Field `TOUCH_APPROACH_LOOP_DONE` writer - touch approach mode loop interrupt"]
pub type TOUCH_APPROACH_LOOP_DONE_W<'a, REG> = crate::BitWriter<'a, REG>;
impl R {
#[doc = "Bit 0 - enable sleep wakeup interrupt"]
#[inline(always)]
pub fn slp_wakeup(&self) -> SLP_WAKEUP_R {
SLP_WAKEUP_R::new((self.bits & 1) != 0)
}
#[doc = "Bit 1 - enable sleep reject interrupt"]
#[inline(always)]
pub fn slp_reject(&self) -> SLP_REJECT_R {
SLP_REJECT_R::new(((self.bits >> 1) & 1) != 0)
}
#[doc = "Bit 2 - enable SDIO idle interrupt"]
#[inline(always)]
pub fn sdio_idle(&self) -> SDIO_IDLE_R {
SDIO_IDLE_R::new(((self.bits >> 2) & 1) != 0)
}
#[doc = "Bit 3 - enable RTC WDT interrupt"]
#[inline(always)]
pub fn wdt(&self) -> WDT_R {
WDT_R::new(((self.bits >> 3) & 1) != 0)
}
#[doc = "Bit 4 - enable touch scan done interrupt"]
#[inline(always)]
pub fn touch_scan_done(&self) -> TOUCH_SCAN_DONE_R {
TOUCH_SCAN_DONE_R::new(((self.bits >> 4) & 1) != 0)
}
#[doc = "Bit 5 - enable ULP-coprocessor interrupt"]
#[inline(always)]
pub fn ulp_cp(&self) -> ULP_CP_R {
ULP_CP_R::new(((self.bits >> 5) & 1) != 0)
}
#[doc = "Bit 6 - enable touch done interrupt"]
#[inline(always)]
pub fn touch_done(&self) -> TOUCH_DONE_R {
TOUCH_DONE_R::new(((self.bits >> 6) & 1) != 0)
}
#[doc = "Bit 7 - enable touch active interrupt"]
#[inline(always)]
pub fn touch_active(&self) -> TOUCH_ACTIVE_R {
TOUCH_ACTIVE_R::new(((self.bits >> 7) & 1) != 0)
}
#[doc = "Bit 8 - enable touch inactive interrupt"]
#[inline(always)]
pub fn touch_inactive(&self) -> TOUCH_INACTIVE_R {
TOUCH_INACTIVE_R::new(((self.bits >> 8) & 1) != 0)
}
#[doc = "Bit 9 - enable brown out interrupt"]
#[inline(always)]
pub fn brown_out(&self) -> BROWN_OUT_R {
BROWN_OUT_R::new(((self.bits >> 9) & 1) != 0)
}
#[doc = "Bit 10 - enable RTC main timer interrupt"]
#[inline(always)]
pub fn main_timer(&self) -> MAIN_TIMER_R {
MAIN_TIMER_R::new(((self.bits >> 10) & 1) != 0)
}
#[doc = "Bit 11 - enable saradc1 interrupt"]
#[inline(always)]
pub fn saradc1(&self) -> SARADC1_R {
SARADC1_R::new(((self.bits >> 11) & 1) != 0)
}
#[doc = "Bit 12 - enable tsens interrupt"]
#[inline(always)]
pub fn tsens(&self) -> TSENS_R {
TSENS_R::new(((self.bits >> 12) & 1) != 0)
}
#[doc = "Bit 13 - enable riscV cocpu interrupt"]
#[inline(always)]
pub fn cocpu(&self) -> COCPU_R {
COCPU_R::new(((self.bits >> 13) & 1) != 0)
}
#[doc = "Bit 14 - enable saradc2 interrupt"]
#[inline(always)]
pub fn saradc2(&self) -> SARADC2_R {
SARADC2_R::new(((self.bits >> 14) & 1) != 0)
}
#[doc = "Bit 15 - enable super watch dog interrupt"]
#[inline(always)]
pub fn swd(&self) -> SWD_R {
SWD_R::new(((self.bits >> 15) & 1) != 0)
}
#[doc = "Bit 16 - enable xtal32k_dead interrupt"]
#[inline(always)]
pub fn xtal32k_dead(&self) -> XTAL32K_DEAD_R {
XTAL32K_DEAD_R::new(((self.bits >> 16) & 1) != 0)
}
#[doc = "Bit 17 - enable cocpu trap interrupt"]
#[inline(always)]
pub fn cocpu_trap(&self) -> COCPU_TRAP_R {
COCPU_TRAP_R::new(((self.bits >> 17) & 1) != 0)
}
#[doc = "Bit 18 - enable touch timeout interrupt"]
#[inline(always)]
pub fn touch_timeout(&self) -> TOUCH_TIMEOUT_R {
TOUCH_TIMEOUT_R::new(((self.bits >> 18) & 1) != 0)
}
#[doc = "Bit 19 - enbale gitch det interrupt"]
#[inline(always)]
pub fn glitch_det(&self) -> GLITCH_DET_R {
GLITCH_DET_R::new(((self.bits >> 19) & 1) != 0)
}
#[doc = "Bit 20 - touch approach mode loop interrupt"]
#[inline(always)]
pub fn touch_approach_loop_done(&self) -> TOUCH_APPROACH_LOOP_DONE_R {
TOUCH_APPROACH_LOOP_DONE_R::new(((self.bits >> 20) & 1) != 0)
}
}
#[cfg(feature = "impl-register-debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
f.debug_struct("INT_ENA")
.field("slp_wakeup", &self.slp_wakeup())
.field("slp_reject", &self.slp_reject())
.field("sdio_idle", &self.sdio_idle())
.field("wdt", &self.wdt())
.field("touch_scan_done", &self.touch_scan_done())
.field("ulp_cp", &self.ulp_cp())
.field("touch_done", &self.touch_done())
.field("touch_active", &self.touch_active())
.field("touch_inactive", &self.touch_inactive())
.field("brown_out", &self.brown_out())
.field("main_timer", &self.main_timer())
.field("saradc1", &self.saradc1())
.field("tsens", &self.tsens())
.field("cocpu", &self.cocpu())
.field("saradc2", &self.saradc2())
.field("swd", &self.swd())
.field("xtal32k_dead", &self.xtal32k_dead())
.field("cocpu_trap", &self.cocpu_trap())
.field("touch_timeout", &self.touch_timeout())
.field("glitch_det", &self.glitch_det())
.field("touch_approach_loop_done", &self.touch_approach_loop_done())
.finish()
}
}
impl W {
#[doc = "Bit 0 - enable sleep wakeup interrupt"]
#[inline(always)]
pub fn slp_wakeup(&mut self) -> SLP_WAKEUP_W<'_, INT_ENA_SPEC> {
SLP_WAKEUP_W::new(self, 0)
}
#[doc = "Bit 1 - enable sleep reject interrupt"]
#[inline(always)]
pub fn slp_reject(&mut self) -> SLP_REJECT_W<'_, INT_ENA_SPEC> {
SLP_REJECT_W::new(self, 1)
}
#[doc = "Bit 2 - enable SDIO idle interrupt"]
#[inline(always)]
pub fn sdio_idle(&mut self) -> SDIO_IDLE_W<'_, INT_ENA_SPEC> {
SDIO_IDLE_W::new(self, 2)
}
#[doc = "Bit 3 - enable RTC WDT interrupt"]
#[inline(always)]
pub fn wdt(&mut self) -> WDT_W<'_, INT_ENA_SPEC> {
WDT_W::new(self, 3)
}
#[doc = "Bit 4 - enable touch scan done interrupt"]
#[inline(always)]
pub fn touch_scan_done(&mut self) -> TOUCH_SCAN_DONE_W<'_, INT_ENA_SPEC> {
TOUCH_SCAN_DONE_W::new(self, 4)
}
#[doc = "Bit 5 - enable ULP-coprocessor interrupt"]
#[inline(always)]
pub fn ulp_cp(&mut self) -> ULP_CP_W<'_, INT_ENA_SPEC> {
ULP_CP_W::new(self, 5)
}
#[doc = "Bit 6 - enable touch done interrupt"]
#[inline(always)]
pub fn touch_done(&mut self) -> TOUCH_DONE_W<'_, INT_ENA_SPEC> {
TOUCH_DONE_W::new(self, 6)
}
#[doc = "Bit 7 - enable touch active interrupt"]
#[inline(always)]
pub fn touch_active(&mut self) -> TOUCH_ACTIVE_W<'_, INT_ENA_SPEC> {
TOUCH_ACTIVE_W::new(self, 7)
}
#[doc = "Bit 8 - enable touch inactive interrupt"]
#[inline(always)]
pub fn touch_inactive(&mut self) -> TOUCH_INACTIVE_W<'_, INT_ENA_SPEC> {
TOUCH_INACTIVE_W::new(self, 8)
}
#[doc = "Bit 9 - enable brown out interrupt"]
#[inline(always)]
pub fn brown_out(&mut self) -> BROWN_OUT_W<'_, INT_ENA_SPEC> {
BROWN_OUT_W::new(self, 9)
}
#[doc = "Bit 10 - enable RTC main timer interrupt"]
#[inline(always)]
pub fn main_timer(&mut self) -> MAIN_TIMER_W<'_, INT_ENA_SPEC> {
MAIN_TIMER_W::new(self, 10)
}
#[doc = "Bit 11 - enable saradc1 interrupt"]
#[inline(always)]
pub fn saradc1(&mut self) -> SARADC1_W<'_, INT_ENA_SPEC> {
SARADC1_W::new(self, 11)
}
#[doc = "Bit 12 - enable tsens interrupt"]
#[inline(always)]
pub fn tsens(&mut self) -> TSENS_W<'_, INT_ENA_SPEC> {
TSENS_W::new(self, 12)
}
#[doc = "Bit 13 - enable riscV cocpu interrupt"]
#[inline(always)]
pub fn cocpu(&mut self) -> COCPU_W<'_, INT_ENA_SPEC> {
COCPU_W::new(self, 13)
}
#[doc = "Bit 14 - enable saradc2 interrupt"]
#[inline(always)]
pub fn saradc2(&mut self) -> SARADC2_W<'_, INT_ENA_SPEC> {
SARADC2_W::new(self, 14)
}
#[doc = "Bit 15 - enable super watch dog interrupt"]
#[inline(always)]
pub fn swd(&mut self) -> SWD_W<'_, INT_ENA_SPEC> {
SWD_W::new(self, 15)
}
#[doc = "Bit 16 - enable xtal32k_dead interrupt"]
#[inline(always)]
pub fn xtal32k_dead(&mut self) -> XTAL32K_DEAD_W<'_, INT_ENA_SPEC> {
XTAL32K_DEAD_W::new(self, 16)
}
#[doc = "Bit 17 - enable cocpu trap interrupt"]
#[inline(always)]
pub fn cocpu_trap(&mut self) -> COCPU_TRAP_W<'_, INT_ENA_SPEC> {
COCPU_TRAP_W::new(self, 17)
}
#[doc = "Bit 18 - enable touch timeout interrupt"]
#[inline(always)]
pub fn touch_timeout(&mut self) -> TOUCH_TIMEOUT_W<'_, INT_ENA_SPEC> {
TOUCH_TIMEOUT_W::new(self, 18)
}
#[doc = "Bit 19 - enbale gitch det interrupt"]
#[inline(always)]
pub fn glitch_det(&mut self) -> GLITCH_DET_W<'_, INT_ENA_SPEC> {
GLITCH_DET_W::new(self, 19)
}
#[doc = "Bit 20 - touch approach mode loop interrupt"]
#[inline(always)]
pub fn touch_approach_loop_done(&mut self) -> TOUCH_APPROACH_LOOP_DONE_W<'_, INT_ENA_SPEC> {
TOUCH_APPROACH_LOOP_DONE_W::new(self, 20)
}
}
#[doc = "configure rtc interrupt register\n\nYou can [`read`](crate::Reg::read) this register and get [`int_ena::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`int_ena::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
pub struct INT_ENA_SPEC;
impl crate::RegisterSpec for INT_ENA_SPEC {
type Ux = u32;
}
#[doc = "`read()` method returns [`int_ena::R`](R) reader structure"]
impl crate::Readable for INT_ENA_SPEC {}
#[doc = "`write(|w| ..)` method takes [`int_ena::W`](W) writer structure"]
impl crate::Writable for INT_ENA_SPEC {
type Safety = crate::Unsafe;
}
#[doc = "`reset()` method sets INT_ENA to value 0"]
impl crate::Resettable for INT_ENA_SPEC {}