#[repr(C)]
#[cfg_attr(feature = "impl-register-debug", derive(Debug))]
#[doc = "Register block"]
pub struct RegisterBlock {
lcd_clock: LCD_CLOCK,
cam_ctrl: CAM_CTRL,
cam_ctrl1: CAM_CTRL1,
cam_rgb_yuv: CAM_RGB_YUV,
lcd_rgb_yuv: LCD_RGB_YUV,
lcd_user: LCD_USER,
lcd_misc: LCD_MISC,
lcd_ctrl: LCD_CTRL,
lcd_ctrl1: LCD_CTRL1,
lcd_ctrl2: LCD_CTRL2,
lcd_cmd_val: LCD_CMD_VAL,
_reserved11: [u8; 0x04],
lcd_dly_mode: LCD_DLY_MODE,
_reserved12: [u8; 0x04],
lcd_data_dout_mode: LCD_DATA_DOUT_MODE,
_reserved13: [u8; 0x28],
lc_dma_int_ena: LC_DMA_INT_ENA,
lc_dma_int_raw: LC_DMA_INT_RAW,
lc_dma_int_st: LC_DMA_INT_ST,
lc_dma_int_clr: LC_DMA_INT_CLR,
_reserved17: [u8; 0x88],
lc_reg_date: LC_REG_DATE,
}
impl RegisterBlock {
#[doc = "0x00 - LCD clock configuration register"]
#[inline(always)]
pub const fn lcd_clock(&self) -> &LCD_CLOCK {
&self.lcd_clock
}
#[doc = "0x04 - Camera clock configuration register"]
#[inline(always)]
pub const fn cam_ctrl(&self) -> &CAM_CTRL {
&self.cam_ctrl
}
#[doc = "0x08 - Camera control register"]
#[inline(always)]
pub const fn cam_ctrl1(&self) -> &CAM_CTRL1 {
&self.cam_ctrl1
}
#[doc = "0x0c - Camera data format conversion register"]
#[inline(always)]
pub const fn cam_rgb_yuv(&self) -> &CAM_RGB_YUV {
&self.cam_rgb_yuv
}
#[doc = "0x10 - LCD data format conversion register"]
#[inline(always)]
pub const fn lcd_rgb_yuv(&self) -> &LCD_RGB_YUV {
&self.lcd_rgb_yuv
}
#[doc = "0x14 - LCD user configuration register"]
#[inline(always)]
pub const fn lcd_user(&self) -> &LCD_USER {
&self.lcd_user
}
#[doc = "0x18 - LCD MISC configuration register"]
#[inline(always)]
pub const fn lcd_misc(&self) -> &LCD_MISC {
&self.lcd_misc
}
#[doc = "0x1c - LCD signal configuration register"]
#[inline(always)]
pub const fn lcd_ctrl(&self) -> &LCD_CTRL {
&self.lcd_ctrl
}
#[doc = "0x20 - LCD signal configuration register 1"]
#[inline(always)]
pub const fn lcd_ctrl1(&self) -> &LCD_CTRL1 {
&self.lcd_ctrl1
}
#[doc = "0x24 - LCD signal configuration register 2"]
#[inline(always)]
pub const fn lcd_ctrl2(&self) -> &LCD_CTRL2 {
&self.lcd_ctrl2
}
#[doc = "0x28 - LCD command value configuration register"]
#[inline(always)]
pub const fn lcd_cmd_val(&self) -> &LCD_CMD_VAL {
&self.lcd_cmd_val
}
#[doc = "0x30 - LCD signal delay configuration register"]
#[inline(always)]
pub const fn lcd_dly_mode(&self) -> &LCD_DLY_MODE {
&self.lcd_dly_mode
}
#[doc = "0x38 - LCD data delay configuration register"]
#[inline(always)]
pub const fn lcd_data_dout_mode(&self) -> &LCD_DATA_DOUT_MODE {
&self.lcd_data_dout_mode
}
#[doc = "0x64 - LCD_CAM GDMA interrupt enable register"]
#[inline(always)]
pub const fn lc_dma_int_ena(&self) -> &LC_DMA_INT_ENA {
&self.lc_dma_int_ena
}
#[doc = "0x68 - LCD_CAM GDMA raw interrupt status register"]
#[inline(always)]
pub const fn lc_dma_int_raw(&self) -> &LC_DMA_INT_RAW {
&self.lc_dma_int_raw
}
#[doc = "0x6c - LCD_CAM GDMA masked interrupt status register"]
#[inline(always)]
pub const fn lc_dma_int_st(&self) -> &LC_DMA_INT_ST {
&self.lc_dma_int_st
}
#[doc = "0x70 - LCD_CAM GDMA interrupt clear register"]
#[inline(always)]
pub const fn lc_dma_int_clr(&self) -> &LC_DMA_INT_CLR {
&self.lc_dma_int_clr
}
#[doc = "0xfc - Version control register"]
#[inline(always)]
pub const fn lc_reg_date(&self) -> &LC_REG_DATE {
&self.lc_reg_date
}
}
#[doc = "LCD_CLOCK (rw) register accessor: LCD clock configuration register\n\nYou can [`read`](crate::Reg::read) this register and get [`lcd_clock::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`lcd_clock::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@lcd_clock`] module"]
pub type LCD_CLOCK = crate::Reg<lcd_clock::LCD_CLOCK_SPEC>;
#[doc = "LCD clock configuration register"]
pub mod lcd_clock;
#[doc = "CAM_CTRL (rw) register accessor: Camera clock configuration register\n\nYou can [`read`](crate::Reg::read) this register and get [`cam_ctrl::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cam_ctrl::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cam_ctrl`] module"]
pub type CAM_CTRL = crate::Reg<cam_ctrl::CAM_CTRL_SPEC>;
#[doc = "Camera clock configuration register"]
pub mod cam_ctrl;
#[doc = "CAM_CTRL1 (rw) register accessor: Camera control register\n\nYou can [`read`](crate::Reg::read) this register and get [`cam_ctrl1::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cam_ctrl1::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cam_ctrl1`] module"]
pub type CAM_CTRL1 = crate::Reg<cam_ctrl1::CAM_CTRL1_SPEC>;
#[doc = "Camera control register"]
pub mod cam_ctrl1;
#[doc = "CAM_RGB_YUV (rw) register accessor: Camera data format conversion register\n\nYou can [`read`](crate::Reg::read) this register and get [`cam_rgb_yuv::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cam_rgb_yuv::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cam_rgb_yuv`] module"]
pub type CAM_RGB_YUV = crate::Reg<cam_rgb_yuv::CAM_RGB_YUV_SPEC>;
#[doc = "Camera data format conversion register"]
pub mod cam_rgb_yuv;
#[doc = "LCD_RGB_YUV (rw) register accessor: LCD data format conversion register\n\nYou can [`read`](crate::Reg::read) this register and get [`lcd_rgb_yuv::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`lcd_rgb_yuv::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@lcd_rgb_yuv`] module"]
pub type LCD_RGB_YUV = crate::Reg<lcd_rgb_yuv::LCD_RGB_YUV_SPEC>;
#[doc = "LCD data format conversion register"]
pub mod lcd_rgb_yuv;
#[doc = "LCD_USER (rw) register accessor: LCD user configuration register\n\nYou can [`read`](crate::Reg::read) this register and get [`lcd_user::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`lcd_user::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@lcd_user`] module"]
pub type LCD_USER = crate::Reg<lcd_user::LCD_USER_SPEC>;
#[doc = "LCD user configuration register"]
pub mod lcd_user;
#[doc = "LCD_MISC (rw) register accessor: LCD MISC configuration register\n\nYou can [`read`](crate::Reg::read) this register and get [`lcd_misc::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`lcd_misc::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@lcd_misc`] module"]
pub type LCD_MISC = crate::Reg<lcd_misc::LCD_MISC_SPEC>;
#[doc = "LCD MISC configuration register"]
pub mod lcd_misc;
#[doc = "LCD_CTRL (rw) register accessor: LCD signal configuration register\n\nYou can [`read`](crate::Reg::read) this register and get [`lcd_ctrl::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`lcd_ctrl::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@lcd_ctrl`] module"]
pub type LCD_CTRL = crate::Reg<lcd_ctrl::LCD_CTRL_SPEC>;
#[doc = "LCD signal configuration register"]
pub mod lcd_ctrl;
#[doc = "LCD_CTRL1 (rw) register accessor: LCD signal configuration register 1\n\nYou can [`read`](crate::Reg::read) this register and get [`lcd_ctrl1::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`lcd_ctrl1::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@lcd_ctrl1`] module"]
pub type LCD_CTRL1 = crate::Reg<lcd_ctrl1::LCD_CTRL1_SPEC>;
#[doc = "LCD signal configuration register 1"]
pub mod lcd_ctrl1;
#[doc = "LCD_CTRL2 (rw) register accessor: LCD signal configuration register 2\n\nYou can [`read`](crate::Reg::read) this register and get [`lcd_ctrl2::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`lcd_ctrl2::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@lcd_ctrl2`] module"]
pub type LCD_CTRL2 = crate::Reg<lcd_ctrl2::LCD_CTRL2_SPEC>;
#[doc = "LCD signal configuration register 2"]
pub mod lcd_ctrl2;
#[doc = "LCD_CMD_VAL (rw) register accessor: LCD command value configuration register\n\nYou can [`read`](crate::Reg::read) this register and get [`lcd_cmd_val::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`lcd_cmd_val::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@lcd_cmd_val`] module"]
pub type LCD_CMD_VAL = crate::Reg<lcd_cmd_val::LCD_CMD_VAL_SPEC>;
#[doc = "LCD command value configuration register"]
pub mod lcd_cmd_val;
#[doc = "LCD_DLY_MODE (rw) register accessor: LCD signal delay configuration register\n\nYou can [`read`](crate::Reg::read) this register and get [`lcd_dly_mode::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`lcd_dly_mode::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@lcd_dly_mode`] module"]
pub type LCD_DLY_MODE = crate::Reg<lcd_dly_mode::LCD_DLY_MODE_SPEC>;
#[doc = "LCD signal delay configuration register"]
pub mod lcd_dly_mode;
#[doc = "LCD_DATA_DOUT_MODE (rw) register accessor: LCD data delay configuration register\n\nYou can [`read`](crate::Reg::read) this register and get [`lcd_data_dout_mode::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`lcd_data_dout_mode::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@lcd_data_dout_mode`] module"]
pub type LCD_DATA_DOUT_MODE = crate::Reg<lcd_data_dout_mode::LCD_DATA_DOUT_MODE_SPEC>;
#[doc = "LCD data delay configuration register"]
pub mod lcd_data_dout_mode;
#[doc = "LC_DMA_INT_ENA (rw) register accessor: LCD_CAM GDMA interrupt enable register\n\nYou can [`read`](crate::Reg::read) this register and get [`lc_dma_int_ena::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`lc_dma_int_ena::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@lc_dma_int_ena`] module"]
pub type LC_DMA_INT_ENA = crate::Reg<lc_dma_int_ena::LC_DMA_INT_ENA_SPEC>;
#[doc = "LCD_CAM GDMA interrupt enable register"]
pub mod lc_dma_int_ena;
#[doc = "LC_DMA_INT_RAW (r) register accessor: LCD_CAM GDMA raw interrupt status register\n\nYou can [`read`](crate::Reg::read) this register and get [`lc_dma_int_raw::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@lc_dma_int_raw`] module"]
pub type LC_DMA_INT_RAW = crate::Reg<lc_dma_int_raw::LC_DMA_INT_RAW_SPEC>;
#[doc = "LCD_CAM GDMA raw interrupt status register"]
pub mod lc_dma_int_raw;
#[doc = "LC_DMA_INT_ST (r) register accessor: LCD_CAM GDMA masked interrupt status register\n\nYou can [`read`](crate::Reg::read) this register and get [`lc_dma_int_st::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@lc_dma_int_st`] module"]
pub type LC_DMA_INT_ST = crate::Reg<lc_dma_int_st::LC_DMA_INT_ST_SPEC>;
#[doc = "LCD_CAM GDMA masked interrupt status register"]
pub mod lc_dma_int_st;
#[doc = "LC_DMA_INT_CLR (w) register accessor: LCD_CAM GDMA interrupt clear register\n\nYou can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`lc_dma_int_clr::W`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@lc_dma_int_clr`] module"]
pub type LC_DMA_INT_CLR = crate::Reg<lc_dma_int_clr::LC_DMA_INT_CLR_SPEC>;
#[doc = "LCD_CAM GDMA interrupt clear register"]
pub mod lc_dma_int_clr;
pub use crate::aes::{date as lc_reg_date, DATE as LC_REG_DATE};