Module esp32s3::sens

SENS Peripheral

Modules

• sar_amp_ctrl1
  no public
• sar_amp_ctrl2
  no public
• sar_amp_ctrl3
  no public
• sar_atten1
  configure saradc1 controller
• sar_atten2
  configure saradc2 controller
• sar_cocpu_debug
  Ulp-riscv debug signal
• sar_cocpu_int_clr
  the interrupt clear of ulp
• sar_cocpu_int_ena
  the interrupt enable of ulp
• sar_cocpu_int_ena_w1tc
  the interrupt enable clear of ulp
• sar_cocpu_int_ena_w1ts
  the interrupt enable of ulp
• sar_cocpu_int_raw
  the interrupt raw of ulp
• sar_cocpu_int_st
  the interrupt state of ulp
• sar_cocpu_state
  get cocpu status
• sar_debug_conf
  rtc peri debug configure
• sar_hall_ctrl
  no public
• sar_i2c_ctrl
  configure rtc i2c controller by sw
• sar_meas1_ctrl1
  no public
• sar_meas1_ctrl2
  configure saradc1 controller
• sar_meas1_mux
  configure saradc1 controller
• sar_meas2_ctrl1
  configure saradc2 controller
• sar_meas2_ctrl2
  configure saradc2 controller
• sar_meas2_mux
  configure saradc2 controller
• sar_nouse
  no public
• sar_peri_clk_gate_conf
  the peri clock gate of rtc peri
• sar_peri_reset_conf
  the peri reset of rtc peri
• sar_power_xpd_sar
  configure power of saradc
• sar_reader1_ctrl
  configure saradc1 reader
• sar_reader1_status
  get saradc1 reader controller status
• sar_reader2_ctrl
  configure saradc2 reader
• sar_reader2_status
  get saradc1 reader controller status
• sar_sardate
  version
• sar_slave_addr1
  configure i2c slave address
• sar_slave_addr2
  configure i2c slave address
• sar_slave_addr3
  configure i2c slave address
• sar_slave_addr4
  configure i2c slave address
• sar_touch_chn_st
  Get touch channel status
• sar_touch_conf
  configure touch controller
• sar_touch_denoise
  configure touch controller
• sar_touch_status0
  get touch scan status
• sar_touch_status1
  touch channel status of touch pad 1
• sar_touch_status2
  touch channel status of touch pad 2
• sar_touch_status3
  touch channel status of touch pad 3
• sar_touch_status4
  touch channel status of touch pad 4
• sar_touch_status5
  touch channel status of touch pad 5
• sar_touch_status6
  touch channel status of touch pad 6
• sar_touch_status7
  touch channel status of touch pad 7
• sar_touch_status8
  touch channel status of touch pad 8
• sar_touch_status9
  touch channel status of touch pad 9
• sar_touch_status10
  touch channel status of touch pad 10
• sar_touch_status11
  touch channel status of touch pad 11
• sar_touch_status12
  touch channel status of touch pad 12
• sar_touch_status13
  touch channel status of touch pad 13
• sar_touch_status14
  touch channel status of touch pad 14
• sar_touch_status15
  touch channel status of sleep pad
• sar_touch_status16
  touch channel status of approach mode
• sar_touch_thres1
  configure touch thres of touch pad
• sar_touch_thres2
  configure touch thres of touch pad
• sar_touch_thres3
  configure touch thres of touch pad
• sar_touch_thres4
  configure touch thres of touch pad
• sar_touch_thres5
  configure touch thres of touch pad
• sar_touch_thres6
  configure touch thres of touch pad
• sar_touch_thres7
  configure touch thres of touch pad
• sar_touch_thres8
  configure touch thres of touch pad
• sar_touch_thres9
  configure touch thres of touch pad
• sar_touch_thres10
  configure touch thres of touch pad
• sar_touch_thres11
  configure touch thres of touch pad
• sar_touch_thres12
  configure touch thres of touch pad
• sar_touch_thres13
  configure touch thres of touch pad
• sar_touch_thres14
  configure touch thres of touch pad
• sar_tsens_ctrl
  configure tsens controller
• sar_tsens_ctrl2
  configure tsens controller

Structs

• RegisterBlock
  Register block

Type Aliases

• SAR_AMP_CTRL1
  SAR_AMP_CTRL1 (rw) register accessor: no public
• SAR_AMP_CTRL2
  SAR_AMP_CTRL2 (rw) register accessor: no public
• SAR_AMP_CTRL3
  SAR_AMP_CTRL3 (rw) register accessor: no public
• SAR_ATTEN1
  SAR_ATTEN1 (rw) register accessor: configure saradc1 controller
• SAR_ATTEN2
  SAR_ATTEN2 (rw) register accessor: configure saradc2 controller
• SAR_COCPU_DEBUG
  SAR_COCPU_DEBUG (r) register accessor: Ulp-riscv debug signal
• SAR_COCPU_INT_CLR
  SAR_COCPU_INT_CLR (w) register accessor: the interrupt clear of ulp
• SAR_COCPU_INT_ENA
  SAR_COCPU_INT_ENA (rw) register accessor: the interrupt enable of ulp
• SAR_COCPU_INT_ENA_W1TC
  SAR_COCPU_INT_ENA_W1TC (w) register accessor: the interrupt enable clear of ulp
• SAR_COCPU_INT_ENA_W1TS
  SAR_COCPU_INT_ENA_W1TS (w) register accessor: the interrupt enable of ulp
• SAR_COCPU_INT_RAW
  SAR_COCPU_INT_RAW (r) register accessor: the interrupt raw of ulp
• SAR_COCPU_INT_ST
  SAR_COCPU_INT_ST (r) register accessor: the interrupt state of ulp
• SAR_COCPU_STATE
  SAR_COCPU_STATE (rw) register accessor: get cocpu status
• SAR_DEBUG_CONF
  SAR_DEBUG_CONF (rw) register accessor: rtc peri debug configure
• SAR_HALL_CTRL
  SAR_HALL_CTRL (rw) register accessor: no public
• SAR_I2C_CTRL
  SAR_I2C_CTRL (rw) register accessor: configure rtc i2c controller by sw
• SAR_MEAS1_CTRL1
  SAR_MEAS1_CTRL1 (rw) register accessor: no public
• SAR_MEAS1_CTRL2
  SAR_MEAS1_CTRL2 (rw) register accessor: configure saradc1 controller
• SAR_MEAS1_MUX
  SAR_MEAS1_MUX (rw) register accessor: configure saradc1 controller
• SAR_MEAS2_CTRL1
  SAR_MEAS2_CTRL1 (rw) register accessor: configure saradc2 controller
• SAR_MEAS2_CTRL2
  SAR_MEAS2_CTRL2 (rw) register accessor: configure saradc2 controller
• SAR_MEAS2_MUX
  SAR_MEAS2_MUX (rw) register accessor: configure saradc2 controller
• SAR_NOUSE
  SAR_NOUSE (rw) register accessor: no public
• SAR_PERI_CLK_GATE_CONF
  SAR_PERI_CLK_GATE_CONF (rw) register accessor: the peri clock gate of rtc peri
• SAR_PERI_RESET_CONF
  SAR_PERI_RESET_CONF (rw) register accessor: the peri reset of rtc peri
• SAR_POWER_XPD_SAR
  SAR_POWER_XPD_SAR (rw) register accessor: configure power of saradc
• SAR_READER1_CTRL
  SAR_READER1_CTRL (rw) register accessor: configure saradc1 reader
• SAR_READER1_STATUS
  SAR_READER1_STATUS (r) register accessor: get saradc1 reader controller status
• SAR_READER2_CTRL
  SAR_READER2_CTRL (rw) register accessor: configure saradc2 reader
• SAR_READER2_STATUS
  SAR_READER2_STATUS (r) register accessor: get saradc1 reader controller status
• SAR_SARDATE
  SAR_SARDATE (rw) register accessor: version
• SAR_SLAVE_ADDR1
  SAR_SLAVE_ADDR1 (rw) register accessor: configure i2c slave address
• SAR_SLAVE_ADDR2
  SAR_SLAVE_ADDR2 (rw) register accessor: configure i2c slave address
• SAR_SLAVE_ADDR3
  SAR_SLAVE_ADDR3 (rw) register accessor: configure i2c slave address
• SAR_SLAVE_ADDR4
  SAR_SLAVE_ADDR4 (rw) register accessor: configure i2c slave address
• SAR_TOUCH_CHN_ST
  SAR_TOUCH_CHN_ST (rw) register accessor: Get touch channel status
• SAR_TOUCH_CONF
  SAR_TOUCH_CONF (rw) register accessor: configure touch controller
• SAR_TOUCH_DENOISE
  SAR_TOUCH_DENOISE (r) register accessor: configure touch controller
• SAR_TOUCH_STATUS0
  SAR_TOUCH_STATUS0 (r) register accessor: get touch scan status
• SAR_TOUCH_STATUS1
  SAR_TOUCH_STATUS1 (r) register accessor: touch channel status of touch pad 1
• SAR_TOUCH_STATUS2
  SAR_TOUCH_STATUS2 (r) register accessor: touch channel status of touch pad 2
• SAR_TOUCH_STATUS3
  SAR_TOUCH_STATUS3 (r) register accessor: touch channel status of touch pad 3
• SAR_TOUCH_STATUS4
  SAR_TOUCH_STATUS4 (r) register accessor: touch channel status of touch pad 4
• SAR_TOUCH_STATUS5
  SAR_TOUCH_STATUS5 (r) register accessor: touch channel status of touch pad 5
• SAR_TOUCH_STATUS6
  SAR_TOUCH_STATUS6 (r) register accessor: touch channel status of touch pad 6
• SAR_TOUCH_STATUS7
  SAR_TOUCH_STATUS7 (r) register accessor: touch channel status of touch pad 7
• SAR_TOUCH_STATUS8
  SAR_TOUCH_STATUS8 (r) register accessor: touch channel status of touch pad 8
• SAR_TOUCH_STATUS9
  SAR_TOUCH_STATUS9 (r) register accessor: touch channel status of touch pad 9
• SAR_TOUCH_STATUS10
  SAR_TOUCH_STATUS10 (r) register accessor: touch channel status of touch pad 10
• SAR_TOUCH_STATUS11
  SAR_TOUCH_STATUS11 (r) register accessor: touch channel status of touch pad 11
• SAR_TOUCH_STATUS12
  SAR_TOUCH_STATUS12 (r) register accessor: touch channel status of touch pad 12
• SAR_TOUCH_STATUS13
  SAR_TOUCH_STATUS13 (r) register accessor: touch channel status of touch pad 13
• SAR_TOUCH_STATUS14
  SAR_TOUCH_STATUS14 (r) register accessor: touch channel status of touch pad 14
• SAR_TOUCH_STATUS15
  SAR_TOUCH_STATUS15 (r) register accessor: touch channel status of sleep pad
• SAR_TOUCH_STATUS16
  SAR_TOUCH_STATUS16 (r) register accessor: touch channel status of approach mode
• SAR_TOUCH_THRES1
  SAR_TOUCH_THRES1 (rw) register accessor: configure touch thres of touch pad
• SAR_TOUCH_THRES2
  SAR_TOUCH_THRES2 (rw) register accessor: configure touch thres of touch pad
• SAR_TOUCH_THRES3
  SAR_TOUCH_THRES3 (rw) register accessor: configure touch thres of touch pad
• SAR_TOUCH_THRES4
  SAR_TOUCH_THRES4 (rw) register accessor: configure touch thres of touch pad
• SAR_TOUCH_THRES5
  SAR_TOUCH_THRES5 (rw) register accessor: configure touch thres of touch pad
• SAR_TOUCH_THRES6
  SAR_TOUCH_THRES6 (rw) register accessor: configure touch thres of touch pad
• SAR_TOUCH_THRES7
  SAR_TOUCH_THRES7 (rw) register accessor: configure touch thres of touch pad
• SAR_TOUCH_THRES8
  SAR_TOUCH_THRES8 (rw) register accessor: configure touch thres of touch pad
• SAR_TOUCH_THRES9
  SAR_TOUCH_THRES9 (rw) register accessor: configure touch thres of touch pad
• SAR_TOUCH_THRES10
  SAR_TOUCH_THRES10 (rw) register accessor: configure touch thres of touch pad
• SAR_TOUCH_THRES11
  SAR_TOUCH_THRES11 (rw) register accessor: configure touch thres of touch pad
• SAR_TOUCH_THRES12
  SAR_TOUCH_THRES12 (rw) register accessor: configure touch thres of touch pad
• SAR_TOUCH_THRES13
  SAR_TOUCH_THRES13 (rw) register accessor: configure touch thres of touch pad
• SAR_TOUCH_THRES14
  SAR_TOUCH_THRES14 (rw) register accessor: configure touch thres of touch pad
• SAR_TSENS_CTRL
  SAR_TSENS_CTRL (rw) register accessor: configure tsens controller
• SAR_TSENS_CTRL2
  SAR_TSENS_CTRL2 (rw) register accessor: configure tsens controller