#[doc = r"Register block"]
#[repr(C)]
pub struct RegisterBlock {
#[doc = "0x00 - Configuration register 0 for channel %s"]
pub ch0_conf0: CH_CONF0,
#[doc = "0x04 - High point register for channel %s"]
pub ch0_hpoint: CH_HPOINT,
#[doc = "0x08 - Initial duty cycle for channel %s"]
pub ch0_duty: CH_DUTY,
#[doc = "0x0c - Configuration register 1 for channel %s"]
pub ch0_conf1: CH_CONF1,
#[doc = "0x10 - Current duty cycle for channel %s"]
pub ch0_duty_r: CH_DUTY_R,
#[doc = "0x14 - Configuration register 0 for channel %s"]
pub ch1_conf0: CH_CONF0,
#[doc = "0x18 - High point register for channel %s"]
pub ch1_hpoint: CH_HPOINT,
#[doc = "0x1c - Initial duty cycle for channel %s"]
pub ch1_duty: CH_DUTY,
#[doc = "0x20 - Configuration register 1 for channel %s"]
pub ch1_conf1: CH_CONF1,
#[doc = "0x24 - Current duty cycle for channel %s"]
pub ch1_duty_r: CH_DUTY_R,
#[doc = "0x28 - Configuration register 0 for channel %s"]
pub ch2_conf0: CH_CONF0,
#[doc = "0x2c - High point register for channel %s"]
pub ch2_hpoint: CH_HPOINT,
#[doc = "0x30 - Initial duty cycle for channel %s"]
pub ch2_duty: CH_DUTY,
#[doc = "0x34 - Configuration register 1 for channel %s"]
pub ch2_conf1: CH_CONF1,
#[doc = "0x38 - Current duty cycle for channel %s"]
pub ch2_duty_r: CH_DUTY_R,
#[doc = "0x3c - Configuration register 0 for channel %s"]
pub ch3_conf0: CH_CONF0,
#[doc = "0x40 - High point register for channel %s"]
pub ch3_hpoint: CH_HPOINT,
#[doc = "0x44 - Initial duty cycle for channel %s"]
pub ch3_duty: CH_DUTY,
#[doc = "0x48 - Configuration register 1 for channel %s"]
pub ch3_conf1: CH_CONF1,
#[doc = "0x4c - Current duty cycle for channel %s"]
pub ch3_duty_r: CH_DUTY_R,
#[doc = "0x50 - Configuration register 0 for channel %s"]
pub ch4_conf0: CH_CONF0,
#[doc = "0x54 - High point register for channel %s"]
pub ch4_hpoint: CH_HPOINT,
#[doc = "0x58 - Initial duty cycle for channel %s"]
pub ch4_duty: CH_DUTY,
#[doc = "0x5c - Configuration register 1 for channel %s"]
pub ch4_conf1: CH_CONF1,
#[doc = "0x60 - Current duty cycle for channel %s"]
pub ch4_duty_r: CH_DUTY_R,
#[doc = "0x64 - Configuration register 0 for channel %s"]
pub ch5_conf0: CH_CONF0,
#[doc = "0x68 - High point register for channel %s"]
pub ch5_hpoint: CH_HPOINT,
#[doc = "0x6c - Initial duty cycle for channel %s"]
pub ch5_duty: CH_DUTY,
#[doc = "0x70 - Configuration register 1 for channel %s"]
pub ch5_conf1: CH_CONF1,
#[doc = "0x74 - Current duty cycle for channel %s"]
pub ch5_duty_r: CH_DUTY_R,
#[doc = "0x78 - Configuration register 0 for channel %s"]
pub ch6_conf0: CH_CONF0,
#[doc = "0x7c - High point register for channel %s"]
pub ch6_hpoint: CH_HPOINT,
#[doc = "0x80 - Initial duty cycle for channel %s"]
pub ch6_duty: CH_DUTY,
#[doc = "0x84 - Configuration register 1 for channel %s"]
pub ch6_conf1: CH_CONF1,
#[doc = "0x88 - Current duty cycle for channel %s"]
pub ch6_duty_r: CH_DUTY_R,
#[doc = "0x8c - Configuration register 0 for channel %s"]
pub ch7_conf0: CH_CONF0,
#[doc = "0x90 - High point register for channel %s"]
pub ch7_hpoint: CH_HPOINT,
#[doc = "0x94 - Initial duty cycle for channel %s"]
pub ch7_duty: CH_DUTY,
#[doc = "0x98 - Configuration register 1 for channel %s"]
pub ch7_conf1: CH_CONF1,
#[doc = "0x9c - Current duty cycle for channel %s"]
pub ch7_duty_r: CH_DUTY_R,
#[doc = "0xa0 - Timer %s configuration"]
pub timer0_conf: TIMER_CONF,
#[doc = "0xa4 - Timer %s current counter value"]
pub timer0_value: TIMER_VALUE,
#[doc = "0xa8 - Timer %s configuration"]
pub timer1_conf: TIMER_CONF,
#[doc = "0xac - Timer %s current counter value"]
pub timer1_value: TIMER_VALUE,
#[doc = "0xb0 - Timer %s configuration"]
pub timer2_conf: TIMER_CONF,
#[doc = "0xb4 - Timer %s current counter value"]
pub timer2_value: TIMER_VALUE,
#[doc = "0xb8 - Timer %s configuration"]
pub timer3_conf: TIMER_CONF,
#[doc = "0xbc - Timer %s current counter value"]
pub timer3_value: TIMER_VALUE,
#[doc = "0xc0 - Raw interrupt status"]
pub int_raw: INT_RAW,
#[doc = "0xc4 - Masked interrupt status"]
pub int_st: INT_ST,
#[doc = "0xc8 - Interrupt enable bits"]
pub int_ena: INT_ENA,
#[doc = "0xcc - Interrupt clear bits"]
pub int_clr: INT_CLR,
#[doc = "0xd0 - Global ledc configuration register"]
pub conf: CONF,
_reserved53: [u8; 0x28],
#[doc = "0xfc - Version control register"]
pub date: DATE,
}
#[doc = "CH_CONF0 (rw) register accessor: an alias for `Reg<CH_CONF0_SPEC>`"]
pub type CH_CONF0 = crate::Reg<ch_conf0::CH_CONF0_SPEC>;
#[doc = "Configuration register 0 for channel %s"]
pub mod ch_conf0;
#[doc = "CH_HPOINT (rw) register accessor: an alias for `Reg<CH_HPOINT_SPEC>`"]
pub type CH_HPOINT = crate::Reg<ch_hpoint::CH_HPOINT_SPEC>;
#[doc = "High point register for channel %s"]
pub mod ch_hpoint;
#[doc = "CH_DUTY (rw) register accessor: an alias for `Reg<CH_DUTY_SPEC>`"]
pub type CH_DUTY = crate::Reg<ch_duty::CH_DUTY_SPEC>;
#[doc = "Initial duty cycle for channel %s"]
pub mod ch_duty;
#[doc = "CH_CONF1 (rw) register accessor: an alias for `Reg<CH_CONF1_SPEC>`"]
pub type CH_CONF1 = crate::Reg<ch_conf1::CH_CONF1_SPEC>;
#[doc = "Configuration register 1 for channel %s"]
pub mod ch_conf1;
#[doc = "CH_DUTY_R (r) register accessor: an alias for `Reg<CH_DUTY_R_SPEC>`"]
pub type CH_DUTY_R = crate::Reg<ch_duty_r::CH_DUTY_R_SPEC>;
#[doc = "Current duty cycle for channel %s"]
pub mod ch_duty_r;
#[doc = "TIMER_CONF (rw) register accessor: an alias for `Reg<TIMER_CONF_SPEC>`"]
pub type TIMER_CONF = crate::Reg<timer_conf::TIMER_CONF_SPEC>;
#[doc = "Timer %s configuration"]
pub mod timer_conf;
#[doc = "TIMER_VALUE (r) register accessor: an alias for `Reg<TIMER_VALUE_SPEC>`"]
pub type TIMER_VALUE = crate::Reg<timer_value::TIMER_VALUE_SPEC>;
#[doc = "Timer %s current counter value"]
pub mod timer_value;
#[doc = "INT_RAW (r) register accessor: an alias for `Reg<INT_RAW_SPEC>`"]
pub type INT_RAW = crate::Reg<int_raw::INT_RAW_SPEC>;
#[doc = "Raw interrupt status"]
pub mod int_raw;
#[doc = "INT_ST (r) register accessor: an alias for `Reg<INT_ST_SPEC>`"]
pub type INT_ST = crate::Reg<int_st::INT_ST_SPEC>;
#[doc = "Masked interrupt status"]
pub mod int_st;
#[doc = "INT_ENA (rw) register accessor: an alias for `Reg<INT_ENA_SPEC>`"]
pub type INT_ENA = crate::Reg<int_ena::INT_ENA_SPEC>;
#[doc = "Interrupt enable bits"]
pub mod int_ena;
#[doc = "INT_CLR (w) register accessor: an alias for `Reg<INT_CLR_SPEC>`"]
pub type INT_CLR = crate::Reg<int_clr::INT_CLR_SPEC>;
#[doc = "Interrupt clear bits"]
pub mod int_clr;
#[doc = "CONF (rw) register accessor: an alias for `Reg<CONF_SPEC>`"]
pub type CONF = crate::Reg<conf::CONF_SPEC>;
#[doc = "Global ledc configuration register"]
pub mod conf;
#[doc = "DATE (rw) register accessor: an alias for `Reg<DATE_SPEC>`"]
pub type DATE = crate::Reg<date::DATE_SPEC>;
#[doc = "Version control register"]
pub mod date;