esp32c6 0.20.0

Peripheral access crate for the ESP32-C6
Documentation 
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198

#[repr(C)]
#[cfg_attr(feature = "impl-register-debug", derive(Debug))]
#[doc = "Register block"]
pub struct RegisterBlock {
    tar0_low: TAR0_LOW,
    tar0_high: TAR0_HIGH,
    tar1_low: TAR1_LOW,
    tar1_high: TAR1_HIGH,
    update: UPDATE,
    main_buf0_low: MAIN_BUF0_LOW,
    main_buf0_high: MAIN_BUF0_HIGH,
    main_buf1_low: MAIN_BUF1_LOW,
    main_buf1_high: MAIN_BUF1_HIGH,
    main_overflow: MAIN_OVERFLOW,
    int_raw: INT_RAW,
    int_st: INT_ST,
    int_ena: INT_ENA,
    int_clr: INT_CLR,
    lp_int_raw: LP_INT_RAW,
    lp_int_st: LP_INT_ST,
    lp_int_ena: LP_INT_ENA,
    lp_int_clr: LP_INT_CLR,
    _reserved18: [u8; 0x03b4],
    date: DATE,
}
impl RegisterBlock {
    #[doc = "0x00 - need_des"]
    #[inline(always)]
    pub const fn tar0_low(&self) -> &TAR0_LOW {
        &self.tar0_low
    }
    #[doc = "0x04 - need_des"]
    #[inline(always)]
    pub const fn tar0_high(&self) -> &TAR0_HIGH {
        &self.tar0_high
    }
    #[doc = "0x08 - need_des"]
    #[inline(always)]
    pub const fn tar1_low(&self) -> &TAR1_LOW {
        &self.tar1_low
    }
    #[doc = "0x0c - need_des"]
    #[inline(always)]
    pub const fn tar1_high(&self) -> &TAR1_HIGH {
        &self.tar1_high
    }
    #[doc = "0x10 - need_des"]
    #[inline(always)]
    pub const fn update(&self) -> &UPDATE {
        &self.update
    }
    #[doc = "0x14 - need_des"]
    #[inline(always)]
    pub const fn main_buf0_low(&self) -> &MAIN_BUF0_LOW {
        &self.main_buf0_low
    }
    #[doc = "0x18 - need_des"]
    #[inline(always)]
    pub const fn main_buf0_high(&self) -> &MAIN_BUF0_HIGH {
        &self.main_buf0_high
    }
    #[doc = "0x1c - need_des"]
    #[inline(always)]
    pub const fn main_buf1_low(&self) -> &MAIN_BUF1_LOW {
        &self.main_buf1_low
    }
    #[doc = "0x20 - need_des"]
    #[inline(always)]
    pub const fn main_buf1_high(&self) -> &MAIN_BUF1_HIGH {
        &self.main_buf1_high
    }
    #[doc = "0x24 - need_des"]
    #[inline(always)]
    pub const fn main_overflow(&self) -> &MAIN_OVERFLOW {
        &self.main_overflow
    }
    #[doc = "0x28 - need_des"]
    #[inline(always)]
    pub const fn int_raw(&self) -> &INT_RAW {
        &self.int_raw
    }
    #[doc = "0x2c - need_des"]
    #[inline(always)]
    pub const fn int_st(&self) -> &INT_ST {
        &self.int_st
    }
    #[doc = "0x30 - need_des"]
    #[inline(always)]
    pub const fn int_ena(&self) -> &INT_ENA {
        &self.int_ena
    }
    #[doc = "0x34 - need_des"]
    #[inline(always)]
    pub const fn int_clr(&self) -> &INT_CLR {
        &self.int_clr
    }
    #[doc = "0x38 - need_des"]
    #[inline(always)]
    pub const fn lp_int_raw(&self) -> &LP_INT_RAW {
        &self.lp_int_raw
    }
    #[doc = "0x3c - need_des"]
    #[inline(always)]
    pub const fn lp_int_st(&self) -> &LP_INT_ST {
        &self.lp_int_st
    }
    #[doc = "0x40 - need_des"]
    #[inline(always)]
    pub const fn lp_int_ena(&self) -> &LP_INT_ENA {
        &self.lp_int_ena
    }
    #[doc = "0x44 - need_des"]
    #[inline(always)]
    pub const fn lp_int_clr(&self) -> &LP_INT_CLR {
        &self.lp_int_clr
    }
    #[doc = "0x3fc - need_des"]
    #[inline(always)]
    pub const fn date(&self) -> &DATE {
        &self.date
    }
}
#[doc = "TAR0_LOW (rw) register accessor: need_des\n\nYou can [`read`](crate::Reg::read) this register and get [`tar0_low::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`tar0_low::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tar0_low`] module"]
pub type TAR0_LOW = crate::Reg<tar0_low::TAR0_LOW_SPEC>;
#[doc = "need_des"]
pub mod tar0_low;
#[doc = "TAR0_HIGH (rw) register accessor: need_des\n\nYou can [`read`](crate::Reg::read) this register and get [`tar0_high::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`tar0_high::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tar0_high`] module"]
pub type TAR0_HIGH = crate::Reg<tar0_high::TAR0_HIGH_SPEC>;
#[doc = "need_des"]
pub mod tar0_high;
#[doc = "TAR1_LOW (rw) register accessor: need_des\n\nYou can [`read`](crate::Reg::read) this register and get [`tar1_low::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`tar1_low::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tar1_low`] module"]
pub type TAR1_LOW = crate::Reg<tar1_low::TAR1_LOW_SPEC>;
#[doc = "need_des"]
pub mod tar1_low;
#[doc = "TAR1_HIGH (rw) register accessor: need_des\n\nYou can [`read`](crate::Reg::read) this register and get [`tar1_high::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`tar1_high::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tar1_high`] module"]
pub type TAR1_HIGH = crate::Reg<tar1_high::TAR1_HIGH_SPEC>;
#[doc = "need_des"]
pub mod tar1_high;
#[doc = "UPDATE (rw) register accessor: need_des\n\nYou can [`read`](crate::Reg::read) this register and get [`update::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`update::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@update`] module"]
pub type UPDATE = crate::Reg<update::UPDATE_SPEC>;
#[doc = "need_des"]
pub mod update;
#[doc = "MAIN_BUF0_LOW (r) register accessor: need_des\n\nYou can [`read`](crate::Reg::read) this register and get [`main_buf0_low::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@main_buf0_low`] module"]
pub type MAIN_BUF0_LOW = crate::Reg<main_buf0_low::MAIN_BUF0_LOW_SPEC>;
#[doc = "need_des"]
pub mod main_buf0_low;
#[doc = "MAIN_BUF0_HIGH (r) register accessor: need_des\n\nYou can [`read`](crate::Reg::read) this register and get [`main_buf0_high::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@main_buf0_high`] module"]
pub type MAIN_BUF0_HIGH = crate::Reg<main_buf0_high::MAIN_BUF0_HIGH_SPEC>;
#[doc = "need_des"]
pub mod main_buf0_high;
#[doc = "MAIN_BUF1_LOW (r) register accessor: need_des\n\nYou can [`read`](crate::Reg::read) this register and get [`main_buf1_low::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@main_buf1_low`] module"]
pub type MAIN_BUF1_LOW = crate::Reg<main_buf1_low::MAIN_BUF1_LOW_SPEC>;
#[doc = "need_des"]
pub mod main_buf1_low;
#[doc = "MAIN_BUF1_HIGH (r) register accessor: need_des\n\nYou can [`read`](crate::Reg::read) this register and get [`main_buf1_high::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@main_buf1_high`] module"]
pub type MAIN_BUF1_HIGH = crate::Reg<main_buf1_high::MAIN_BUF1_HIGH_SPEC>;
#[doc = "need_des"]
pub mod main_buf1_high;
#[doc = "MAIN_OVERFLOW (w) register accessor: need_des\n\nYou can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`main_overflow::W`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@main_overflow`] module"]
pub type MAIN_OVERFLOW = crate::Reg<main_overflow::MAIN_OVERFLOW_SPEC>;
#[doc = "need_des"]
pub mod main_overflow;
#[doc = "INT_RAW (rw) register accessor: need_des\n\nYou can [`read`](crate::Reg::read) this register and get [`int_raw::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`int_raw::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@int_raw`] module"]
pub type INT_RAW = crate::Reg<int_raw::INT_RAW_SPEC>;
#[doc = "need_des"]
pub mod int_raw;
#[doc = "INT_ST (r) register accessor: need_des\n\nYou can [`read`](crate::Reg::read) this register and get [`int_st::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@int_st`] module"]
pub type INT_ST = crate::Reg<int_st::INT_ST_SPEC>;
#[doc = "need_des"]
pub mod int_st;
#[doc = "INT_ENA (rw) register accessor: need_des\n\nYou can [`read`](crate::Reg::read) this register and get [`int_ena::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`int_ena::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@int_ena`] module"]
pub type INT_ENA = crate::Reg<int_ena::INT_ENA_SPEC>;
#[doc = "need_des"]
pub mod int_ena;
#[doc = "INT_CLR (w) register accessor: need_des\n\nYou can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`int_clr::W`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@int_clr`] module"]
pub type INT_CLR = crate::Reg<int_clr::INT_CLR_SPEC>;
#[doc = "need_des"]
pub mod int_clr;
#[doc = "LP_INT_RAW (rw) register accessor: need_des\n\nYou can [`read`](crate::Reg::read) this register and get [`lp_int_raw::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`lp_int_raw::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@lp_int_raw`] module"]
pub type LP_INT_RAW = crate::Reg<lp_int_raw::LP_INT_RAW_SPEC>;
#[doc = "need_des"]
pub mod lp_int_raw;
#[doc = "LP_INT_ST (r) register accessor: need_des\n\nYou can [`read`](crate::Reg::read) this register and get [`lp_int_st::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@lp_int_st`] module"]
pub type LP_INT_ST = crate::Reg<lp_int_st::LP_INT_ST_SPEC>;
#[doc = "need_des"]
pub mod lp_int_st;
#[doc = "LP_INT_ENA (rw) register accessor: need_des\n\nYou can [`read`](crate::Reg::read) this register and get [`lp_int_ena::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`lp_int_ena::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@lp_int_ena`] module"]
pub type LP_INT_ENA = crate::Reg<lp_int_ena::LP_INT_ENA_SPEC>;
#[doc = "need_des"]
pub mod lp_int_ena;
#[doc = "LP_INT_CLR (w) register accessor: need_des\n\nYou can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`lp_int_clr::W`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@lp_int_clr`] module"]
pub type LP_INT_CLR = crate::Reg<lp_int_clr::LP_INT_CLR_SPEC>;
#[doc = "need_des"]
pub mod lp_int_clr;
#[doc = "DATE (rw) register accessor: need_des\n\nYou can [`read`](crate::Reg::read) this register and get [`date::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`date::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@date`] module"]
pub type DATE = crate::Reg<date::DATE_SPEC>;
#[doc = "need_des"]
pub mod date;