#[doc = "Register `SLC1INT_ENA1` reader"]
pub type R = crate::R<SLC1INT_ENA1_SPEC>;
#[doc = "Register `SLC1INT_ENA1` writer"]
pub type W = crate::W<SLC1INT_ENA1_SPEC>;
#[doc = "Field `SDIO_SLC_FRHOST_BIT_INT_ENA1(0-7)` reader - Write 1 to enable interrupt SLC_FRHOST_BITn_INT (n: 0-7)."]
pub type SDIO_SLC_FRHOST_BIT_INT_ENA1_R = crate::BitReader;
#[doc = "Field `SDIO_SLC_FRHOST_BIT_INT_ENA1(0-7)` writer - Write 1 to enable interrupt SLC_FRHOST_BITn_INT (n: 0-7)."]
pub type SDIO_SLC_FRHOST_BIT_INT_ENA1_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `SDIO_SLC1_RX_ENAART_INT_ENA1` reader - Write 1 to enable interrupt SLC1_RX_ENAART_INT."]
pub type SDIO_SLC1_RX_ENAART_INT_ENA1_R = crate::BitReader;
#[doc = "Field `SDIO_SLC1_RX_ENAART_INT_ENA1` writer - Write 1 to enable interrupt SLC1_RX_ENAART_INT."]
pub type SDIO_SLC1_RX_ENAART_INT_ENA1_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `SDIO_SLC1_TX_ENAART_INT_ENA1` reader - Write 1 to enable interrupt SLC1_TX_ENAART_INT."]
pub type SDIO_SLC1_TX_ENAART_INT_ENA1_R = crate::BitReader;
#[doc = "Field `SDIO_SLC1_TX_ENAART_INT_ENA1` writer - Write 1 to enable interrupt SLC1_TX_ENAART_INT."]
pub type SDIO_SLC1_TX_ENAART_INT_ENA1_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `SDIO_SLC1_RX_UDF_INT_ENA1` reader - Write 1 to enable interrupt SLC1_RX_UDF_INT."]
pub type SDIO_SLC1_RX_UDF_INT_ENA1_R = crate::BitReader;
#[doc = "Field `SDIO_SLC1_RX_UDF_INT_ENA1` writer - Write 1 to enable interrupt SLC1_RX_UDF_INT."]
pub type SDIO_SLC1_RX_UDF_INT_ENA1_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `SDIO_SLC1_TX_OVF_INT_ENA1` reader - Write 1 to enable interrupt SLC1_TX_OVF_INT."]
pub type SDIO_SLC1_TX_OVF_INT_ENA1_R = crate::BitReader;
#[doc = "Field `SDIO_SLC1_TX_OVF_INT_ENA1` writer - Write 1 to enable interrupt SLC1_TX_OVF_INT."]
pub type SDIO_SLC1_TX_OVF_INT_ENA1_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `SDIO_SLC1_TX_DONE_INT_ENA1` reader - Write 1 to enable interrupt SLC1_TX_DONE_INT."]
pub type SDIO_SLC1_TX_DONE_INT_ENA1_R = crate::BitReader;
#[doc = "Field `SDIO_SLC1_TX_DONE_INT_ENA1` writer - Write 1 to enable interrupt SLC1_TX_DONE_INT."]
pub type SDIO_SLC1_TX_DONE_INT_ENA1_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `SDIO_SLC1_TX_SUC_EOF_INT_ENA1` reader - Write 1 to enable interrupt SLC1_TX_SUC_EOF_INT."]
pub type SDIO_SLC1_TX_SUC_EOF_INT_ENA1_R = crate::BitReader;
#[doc = "Field `SDIO_SLC1_TX_SUC_EOF_INT_ENA1` writer - Write 1 to enable interrupt SLC1_TX_SUC_EOF_INT."]
pub type SDIO_SLC1_TX_SUC_EOF_INT_ENA1_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `SDIO_SLC1_RX_DONE_INT_ENA1` reader - Write 1 to enable interrupt SLC1_RX_DONE_INT."]
pub type SDIO_SLC1_RX_DONE_INT_ENA1_R = crate::BitReader;
#[doc = "Field `SDIO_SLC1_RX_DONE_INT_ENA1` writer - Write 1 to enable interrupt SLC1_RX_DONE_INT."]
pub type SDIO_SLC1_RX_DONE_INT_ENA1_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `SDIO_SLC1_RX_EOF_INT_ENA1` reader - Write 1 to enable interrupt SLC1_RX_EOF_INT."]
pub type SDIO_SLC1_RX_EOF_INT_ENA1_R = crate::BitReader;
#[doc = "Field `SDIO_SLC1_RX_EOF_INT_ENA1` writer - Write 1 to enable interrupt SLC1_RX_EOF_INT."]
pub type SDIO_SLC1_RX_EOF_INT_ENA1_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `SDIO_SLC1_TX_DSCR_ERR_INT_ENA1` reader - Write 1 to enable interrupt SLC1_TX_DSCR_ERR_INT."]
pub type SDIO_SLC1_TX_DSCR_ERR_INT_ENA1_R = crate::BitReader;
#[doc = "Field `SDIO_SLC1_TX_DSCR_ERR_INT_ENA1` writer - Write 1 to enable interrupt SLC1_TX_DSCR_ERR_INT."]
pub type SDIO_SLC1_TX_DSCR_ERR_INT_ENA1_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `SDIO_SLC1_RX_DSCR_ERR_INT_ENA1` reader - Write 1 to enable interrupt SLC1_RX_DSCR_ERR_INT."]
pub type SDIO_SLC1_RX_DSCR_ERR_INT_ENA1_R = crate::BitReader;
#[doc = "Field `SDIO_SLC1_RX_DSCR_ERR_INT_ENA1` writer - Write 1 to enable interrupt SLC1_RX_DSCR_ERR_INT."]
pub type SDIO_SLC1_RX_DSCR_ERR_INT_ENA1_W<'a, REG> = crate::BitWriter<'a, REG>;
impl R {
#[doc = "Write 1 to enable interrupt SLC_FRHOST_BITn_INT (n: 0-7)."]
#[doc = ""]
#[doc = "<div class=\"warning\">`n` is number of field in register. `n == 0` corresponds to `SDIO_SLC_FRHOST_BIT0_INT_ENA1` field.</div>"]
#[inline(always)]
pub fn sdio_slc_frhost_bit_int_ena1(&self, n: u8) -> SDIO_SLC_FRHOST_BIT_INT_ENA1_R {
#[allow(clippy::no_effect)]
[(); 8][n as usize];
SDIO_SLC_FRHOST_BIT_INT_ENA1_R::new(((self.bits >> n) & 1) != 0)
}
#[doc = "Iterator for array of:"]
#[doc = "Write 1 to enable interrupt SLC_FRHOST_BITn_INT (n: 0-7)."]
#[inline(always)]
pub fn sdio_slc_frhost_bit_int_ena1_iter(
&self,
) -> impl Iterator<Item = SDIO_SLC_FRHOST_BIT_INT_ENA1_R> + '_ {
(0..8).map(move |n| SDIO_SLC_FRHOST_BIT_INT_ENA1_R::new(((self.bits >> n) & 1) != 0))
}
#[doc = "Bit 0 - Write 1 to enable interrupt SLC_FRHOST_BITn_INT (n: 0-7)."]
#[inline(always)]
pub fn sdio_slc_frhost_bit0_int_ena1(&self) -> SDIO_SLC_FRHOST_BIT_INT_ENA1_R {
SDIO_SLC_FRHOST_BIT_INT_ENA1_R::new((self.bits & 1) != 0)
}
#[doc = "Bit 1 - Write 1 to enable interrupt SLC_FRHOST_BITn_INT (n: 0-7)."]
#[inline(always)]
pub fn sdio_slc_frhost_bit1_int_ena1(&self) -> SDIO_SLC_FRHOST_BIT_INT_ENA1_R {
SDIO_SLC_FRHOST_BIT_INT_ENA1_R::new(((self.bits >> 1) & 1) != 0)
}
#[doc = "Bit 2 - Write 1 to enable interrupt SLC_FRHOST_BITn_INT (n: 0-7)."]
#[inline(always)]
pub fn sdio_slc_frhost_bit2_int_ena1(&self) -> SDIO_SLC_FRHOST_BIT_INT_ENA1_R {
SDIO_SLC_FRHOST_BIT_INT_ENA1_R::new(((self.bits >> 2) & 1) != 0)
}
#[doc = "Bit 3 - Write 1 to enable interrupt SLC_FRHOST_BITn_INT (n: 0-7)."]
#[inline(always)]
pub fn sdio_slc_frhost_bit3_int_ena1(&self) -> SDIO_SLC_FRHOST_BIT_INT_ENA1_R {
SDIO_SLC_FRHOST_BIT_INT_ENA1_R::new(((self.bits >> 3) & 1) != 0)
}
#[doc = "Bit 4 - Write 1 to enable interrupt SLC_FRHOST_BITn_INT (n: 0-7)."]
#[inline(always)]
pub fn sdio_slc_frhost_bit4_int_ena1(&self) -> SDIO_SLC_FRHOST_BIT_INT_ENA1_R {
SDIO_SLC_FRHOST_BIT_INT_ENA1_R::new(((self.bits >> 4) & 1) != 0)
}
#[doc = "Bit 5 - Write 1 to enable interrupt SLC_FRHOST_BITn_INT (n: 0-7)."]
#[inline(always)]
pub fn sdio_slc_frhost_bit5_int_ena1(&self) -> SDIO_SLC_FRHOST_BIT_INT_ENA1_R {
SDIO_SLC_FRHOST_BIT_INT_ENA1_R::new(((self.bits >> 5) & 1) != 0)
}
#[doc = "Bit 6 - Write 1 to enable interrupt SLC_FRHOST_BITn_INT (n: 0-7)."]
#[inline(always)]
pub fn sdio_slc_frhost_bit6_int_ena1(&self) -> SDIO_SLC_FRHOST_BIT_INT_ENA1_R {
SDIO_SLC_FRHOST_BIT_INT_ENA1_R::new(((self.bits >> 6) & 1) != 0)
}
#[doc = "Bit 7 - Write 1 to enable interrupt SLC_FRHOST_BITn_INT (n: 0-7)."]
#[inline(always)]
pub fn sdio_slc_frhost_bit7_int_ena1(&self) -> SDIO_SLC_FRHOST_BIT_INT_ENA1_R {
SDIO_SLC_FRHOST_BIT_INT_ENA1_R::new(((self.bits >> 7) & 1) != 0)
}
#[doc = "Bit 8 - Write 1 to enable interrupt SLC1_RX_ENAART_INT."]
#[inline(always)]
pub fn sdio_slc1_rx_enaart_int_ena1(&self) -> SDIO_SLC1_RX_ENAART_INT_ENA1_R {
SDIO_SLC1_RX_ENAART_INT_ENA1_R::new(((self.bits >> 8) & 1) != 0)
}
#[doc = "Bit 9 - Write 1 to enable interrupt SLC1_TX_ENAART_INT."]
#[inline(always)]
pub fn sdio_slc1_tx_enaart_int_ena1(&self) -> SDIO_SLC1_TX_ENAART_INT_ENA1_R {
SDIO_SLC1_TX_ENAART_INT_ENA1_R::new(((self.bits >> 9) & 1) != 0)
}
#[doc = "Bit 10 - Write 1 to enable interrupt SLC1_RX_UDF_INT."]
#[inline(always)]
pub fn sdio_slc1_rx_udf_int_ena1(&self) -> SDIO_SLC1_RX_UDF_INT_ENA1_R {
SDIO_SLC1_RX_UDF_INT_ENA1_R::new(((self.bits >> 10) & 1) != 0)
}
#[doc = "Bit 11 - Write 1 to enable interrupt SLC1_TX_OVF_INT."]
#[inline(always)]
pub fn sdio_slc1_tx_ovf_int_ena1(&self) -> SDIO_SLC1_TX_OVF_INT_ENA1_R {
SDIO_SLC1_TX_OVF_INT_ENA1_R::new(((self.bits >> 11) & 1) != 0)
}
#[doc = "Bit 14 - Write 1 to enable interrupt SLC1_TX_DONE_INT."]
#[inline(always)]
pub fn sdio_slc1_tx_done_int_ena1(&self) -> SDIO_SLC1_TX_DONE_INT_ENA1_R {
SDIO_SLC1_TX_DONE_INT_ENA1_R::new(((self.bits >> 14) & 1) != 0)
}
#[doc = "Bit 15 - Write 1 to enable interrupt SLC1_TX_SUC_EOF_INT."]
#[inline(always)]
pub fn sdio_slc1_tx_suc_eof_int_ena1(&self) -> SDIO_SLC1_TX_SUC_EOF_INT_ENA1_R {
SDIO_SLC1_TX_SUC_EOF_INT_ENA1_R::new(((self.bits >> 15) & 1) != 0)
}
#[doc = "Bit 16 - Write 1 to enable interrupt SLC1_RX_DONE_INT."]
#[inline(always)]
pub fn sdio_slc1_rx_done_int_ena1(&self) -> SDIO_SLC1_RX_DONE_INT_ENA1_R {
SDIO_SLC1_RX_DONE_INT_ENA1_R::new(((self.bits >> 16) & 1) != 0)
}
#[doc = "Bit 17 - Write 1 to enable interrupt SLC1_RX_EOF_INT."]
#[inline(always)]
pub fn sdio_slc1_rx_eof_int_ena1(&self) -> SDIO_SLC1_RX_EOF_INT_ENA1_R {
SDIO_SLC1_RX_EOF_INT_ENA1_R::new(((self.bits >> 17) & 1) != 0)
}
#[doc = "Bit 19 - Write 1 to enable interrupt SLC1_TX_DSCR_ERR_INT."]
#[inline(always)]
pub fn sdio_slc1_tx_dscr_err_int_ena1(&self) -> SDIO_SLC1_TX_DSCR_ERR_INT_ENA1_R {
SDIO_SLC1_TX_DSCR_ERR_INT_ENA1_R::new(((self.bits >> 19) & 1) != 0)
}
#[doc = "Bit 20 - Write 1 to enable interrupt SLC1_RX_DSCR_ERR_INT."]
#[inline(always)]
pub fn sdio_slc1_rx_dscr_err_int_ena1(&self) -> SDIO_SLC1_RX_DSCR_ERR_INT_ENA1_R {
SDIO_SLC1_RX_DSCR_ERR_INT_ENA1_R::new(((self.bits >> 20) & 1) != 0)
}
}
#[cfg(feature = "impl-register-debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
f.debug_struct("SLC1INT_ENA1")
.field(
"sdio_slc_frhost_bit0_int_ena1",
&self.sdio_slc_frhost_bit0_int_ena1(),
)
.field(
"sdio_slc_frhost_bit1_int_ena1",
&self.sdio_slc_frhost_bit1_int_ena1(),
)
.field(
"sdio_slc_frhost_bit2_int_ena1",
&self.sdio_slc_frhost_bit2_int_ena1(),
)
.field(
"sdio_slc_frhost_bit3_int_ena1",
&self.sdio_slc_frhost_bit3_int_ena1(),
)
.field(
"sdio_slc_frhost_bit4_int_ena1",
&self.sdio_slc_frhost_bit4_int_ena1(),
)
.field(
"sdio_slc_frhost_bit5_int_ena1",
&self.sdio_slc_frhost_bit5_int_ena1(),
)
.field(
"sdio_slc_frhost_bit6_int_ena1",
&self.sdio_slc_frhost_bit6_int_ena1(),
)
.field(
"sdio_slc_frhost_bit7_int_ena1",
&self.sdio_slc_frhost_bit7_int_ena1(),
)
.field(
"sdio_slc1_rx_enaart_int_ena1",
&self.sdio_slc1_rx_enaart_int_ena1(),
)
.field(
"sdio_slc1_tx_enaart_int_ena1",
&self.sdio_slc1_tx_enaart_int_ena1(),
)
.field(
"sdio_slc1_rx_udf_int_ena1",
&self.sdio_slc1_rx_udf_int_ena1(),
)
.field(
"sdio_slc1_tx_ovf_int_ena1",
&self.sdio_slc1_tx_ovf_int_ena1(),
)
.field(
"sdio_slc1_tx_done_int_ena1",
&self.sdio_slc1_tx_done_int_ena1(),
)
.field(
"sdio_slc1_tx_suc_eof_int_ena1",
&self.sdio_slc1_tx_suc_eof_int_ena1(),
)
.field(
"sdio_slc1_rx_done_int_ena1",
&self.sdio_slc1_rx_done_int_ena1(),
)
.field(
"sdio_slc1_rx_eof_int_ena1",
&self.sdio_slc1_rx_eof_int_ena1(),
)
.field(
"sdio_slc1_tx_dscr_err_int_ena1",
&self.sdio_slc1_tx_dscr_err_int_ena1(),
)
.field(
"sdio_slc1_rx_dscr_err_int_ena1",
&self.sdio_slc1_rx_dscr_err_int_ena1(),
)
.finish()
}
}
impl W {
#[doc = "Write 1 to enable interrupt SLC_FRHOST_BITn_INT (n: 0-7)."]
#[doc = ""]
#[doc = "<div class=\"warning\">`n` is number of field in register. `n == 0` corresponds to `SDIO_SLC_FRHOST_BIT0_INT_ENA1` field.</div>"]
#[inline(always)]
pub fn sdio_slc_frhost_bit_int_ena1(
&mut self,
n: u8,
) -> SDIO_SLC_FRHOST_BIT_INT_ENA1_W<'_, SLC1INT_ENA1_SPEC> {
#[allow(clippy::no_effect)]
[(); 8][n as usize];
SDIO_SLC_FRHOST_BIT_INT_ENA1_W::new(self, n)
}
#[doc = "Bit 0 - Write 1 to enable interrupt SLC_FRHOST_BITn_INT (n: 0-7)."]
#[inline(always)]
pub fn sdio_slc_frhost_bit0_int_ena1(
&mut self,
) -> SDIO_SLC_FRHOST_BIT_INT_ENA1_W<'_, SLC1INT_ENA1_SPEC> {
SDIO_SLC_FRHOST_BIT_INT_ENA1_W::new(self, 0)
}
#[doc = "Bit 1 - Write 1 to enable interrupt SLC_FRHOST_BITn_INT (n: 0-7)."]
#[inline(always)]
pub fn sdio_slc_frhost_bit1_int_ena1(
&mut self,
) -> SDIO_SLC_FRHOST_BIT_INT_ENA1_W<'_, SLC1INT_ENA1_SPEC> {
SDIO_SLC_FRHOST_BIT_INT_ENA1_W::new(self, 1)
}
#[doc = "Bit 2 - Write 1 to enable interrupt SLC_FRHOST_BITn_INT (n: 0-7)."]
#[inline(always)]
pub fn sdio_slc_frhost_bit2_int_ena1(
&mut self,
) -> SDIO_SLC_FRHOST_BIT_INT_ENA1_W<'_, SLC1INT_ENA1_SPEC> {
SDIO_SLC_FRHOST_BIT_INT_ENA1_W::new(self, 2)
}
#[doc = "Bit 3 - Write 1 to enable interrupt SLC_FRHOST_BITn_INT (n: 0-7)."]
#[inline(always)]
pub fn sdio_slc_frhost_bit3_int_ena1(
&mut self,
) -> SDIO_SLC_FRHOST_BIT_INT_ENA1_W<'_, SLC1INT_ENA1_SPEC> {
SDIO_SLC_FRHOST_BIT_INT_ENA1_W::new(self, 3)
}
#[doc = "Bit 4 - Write 1 to enable interrupt SLC_FRHOST_BITn_INT (n: 0-7)."]
#[inline(always)]
pub fn sdio_slc_frhost_bit4_int_ena1(
&mut self,
) -> SDIO_SLC_FRHOST_BIT_INT_ENA1_W<'_, SLC1INT_ENA1_SPEC> {
SDIO_SLC_FRHOST_BIT_INT_ENA1_W::new(self, 4)
}
#[doc = "Bit 5 - Write 1 to enable interrupt SLC_FRHOST_BITn_INT (n: 0-7)."]
#[inline(always)]
pub fn sdio_slc_frhost_bit5_int_ena1(
&mut self,
) -> SDIO_SLC_FRHOST_BIT_INT_ENA1_W<'_, SLC1INT_ENA1_SPEC> {
SDIO_SLC_FRHOST_BIT_INT_ENA1_W::new(self, 5)
}
#[doc = "Bit 6 - Write 1 to enable interrupt SLC_FRHOST_BITn_INT (n: 0-7)."]
#[inline(always)]
pub fn sdio_slc_frhost_bit6_int_ena1(
&mut self,
) -> SDIO_SLC_FRHOST_BIT_INT_ENA1_W<'_, SLC1INT_ENA1_SPEC> {
SDIO_SLC_FRHOST_BIT_INT_ENA1_W::new(self, 6)
}
#[doc = "Bit 7 - Write 1 to enable interrupt SLC_FRHOST_BITn_INT (n: 0-7)."]
#[inline(always)]
pub fn sdio_slc_frhost_bit7_int_ena1(
&mut self,
) -> SDIO_SLC_FRHOST_BIT_INT_ENA1_W<'_, SLC1INT_ENA1_SPEC> {
SDIO_SLC_FRHOST_BIT_INT_ENA1_W::new(self, 7)
}
#[doc = "Bit 8 - Write 1 to enable interrupt SLC1_RX_ENAART_INT."]
#[inline(always)]
pub fn sdio_slc1_rx_enaart_int_ena1(
&mut self,
) -> SDIO_SLC1_RX_ENAART_INT_ENA1_W<'_, SLC1INT_ENA1_SPEC> {
SDIO_SLC1_RX_ENAART_INT_ENA1_W::new(self, 8)
}
#[doc = "Bit 9 - Write 1 to enable interrupt SLC1_TX_ENAART_INT."]
#[inline(always)]
pub fn sdio_slc1_tx_enaart_int_ena1(
&mut self,
) -> SDIO_SLC1_TX_ENAART_INT_ENA1_W<'_, SLC1INT_ENA1_SPEC> {
SDIO_SLC1_TX_ENAART_INT_ENA1_W::new(self, 9)
}
#[doc = "Bit 10 - Write 1 to enable interrupt SLC1_RX_UDF_INT."]
#[inline(always)]
pub fn sdio_slc1_rx_udf_int_ena1(
&mut self,
) -> SDIO_SLC1_RX_UDF_INT_ENA1_W<'_, SLC1INT_ENA1_SPEC> {
SDIO_SLC1_RX_UDF_INT_ENA1_W::new(self, 10)
}
#[doc = "Bit 11 - Write 1 to enable interrupt SLC1_TX_OVF_INT."]
#[inline(always)]
pub fn sdio_slc1_tx_ovf_int_ena1(
&mut self,
) -> SDIO_SLC1_TX_OVF_INT_ENA1_W<'_, SLC1INT_ENA1_SPEC> {
SDIO_SLC1_TX_OVF_INT_ENA1_W::new(self, 11)
}
#[doc = "Bit 14 - Write 1 to enable interrupt SLC1_TX_DONE_INT."]
#[inline(always)]
pub fn sdio_slc1_tx_done_int_ena1(
&mut self,
) -> SDIO_SLC1_TX_DONE_INT_ENA1_W<'_, SLC1INT_ENA1_SPEC> {
SDIO_SLC1_TX_DONE_INT_ENA1_W::new(self, 14)
}
#[doc = "Bit 15 - Write 1 to enable interrupt SLC1_TX_SUC_EOF_INT."]
#[inline(always)]
pub fn sdio_slc1_tx_suc_eof_int_ena1(
&mut self,
) -> SDIO_SLC1_TX_SUC_EOF_INT_ENA1_W<'_, SLC1INT_ENA1_SPEC> {
SDIO_SLC1_TX_SUC_EOF_INT_ENA1_W::new(self, 15)
}
#[doc = "Bit 16 - Write 1 to enable interrupt SLC1_RX_DONE_INT."]
#[inline(always)]
pub fn sdio_slc1_rx_done_int_ena1(
&mut self,
) -> SDIO_SLC1_RX_DONE_INT_ENA1_W<'_, SLC1INT_ENA1_SPEC> {
SDIO_SLC1_RX_DONE_INT_ENA1_W::new(self, 16)
}
#[doc = "Bit 17 - Write 1 to enable interrupt SLC1_RX_EOF_INT."]
#[inline(always)]
pub fn sdio_slc1_rx_eof_int_ena1(
&mut self,
) -> SDIO_SLC1_RX_EOF_INT_ENA1_W<'_, SLC1INT_ENA1_SPEC> {
SDIO_SLC1_RX_EOF_INT_ENA1_W::new(self, 17)
}
#[doc = "Bit 19 - Write 1 to enable interrupt SLC1_TX_DSCR_ERR_INT."]
#[inline(always)]
pub fn sdio_slc1_tx_dscr_err_int_ena1(
&mut self,
) -> SDIO_SLC1_TX_DSCR_ERR_INT_ENA1_W<'_, SLC1INT_ENA1_SPEC> {
SDIO_SLC1_TX_DSCR_ERR_INT_ENA1_W::new(self, 19)
}
#[doc = "Bit 20 - Write 1 to enable interrupt SLC1_RX_DSCR_ERR_INT."]
#[inline(always)]
pub fn sdio_slc1_rx_dscr_err_int_ena1(
&mut self,
) -> SDIO_SLC1_RX_DSCR_ERR_INT_ENA1_W<'_, SLC1INT_ENA1_SPEC> {
SDIO_SLC1_RX_DSCR_ERR_INT_ENA1_W::new(self, 20)
}
}
#[doc = "SLC1 to slave interrupt enable\n\nYou can [`read`](crate::Reg::read) this register and get [`slc1int_ena1::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`slc1int_ena1::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
pub struct SLC1INT_ENA1_SPEC;
impl crate::RegisterSpec for SLC1INT_ENA1_SPEC {
type Ux = u32;
}
#[doc = "`read()` method returns [`slc1int_ena1::R`](R) reader structure"]
impl crate::Readable for SLC1INT_ENA1_SPEC {}
#[doc = "`write(|w| ..)` method takes [`slc1int_ena1::W`](W) writer structure"]
impl crate::Writable for SLC1INT_ENA1_SPEC {
type Safety = crate::Unsafe;
}
#[doc = "`reset()` method sets SLC1INT_ENA1 to value 0"]
impl crate::Resettable for SLC1INT_ENA1_SPEC {}