#[doc = "Register `CTRL` reader"]
pub type R = crate::R<CTRL_SPEC>;
#[doc = "Register `CTRL` writer"]
pub type W = crate::W<CTRL_SPEC>;
#[doc = "Field `DUMMY_OUT` reader - Configures whether or not to output the FSPI bus signals in DUMMY state. \\\\ 0: Not output \\\\ 1: Output \\\\ Can be configured in CONF state."]
pub type DUMMY_OUT_R = crate::BitReader;
#[doc = "Field `DUMMY_OUT` writer - Configures whether or not to output the FSPI bus signals in DUMMY state. \\\\ 0: Not output \\\\ 1: Output \\\\ Can be configured in CONF state."]
pub type DUMMY_OUT_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `FADDR_DUAL` reader - Configures whether or not to enable 2-bit mode during address (ADDR) state.\\\\ 0: Disable \\\\ 1: Enable \\\\ Can be configured in CONF state."]
pub type FADDR_DUAL_R = crate::BitReader;
#[doc = "Field `FADDR_DUAL` writer - Configures whether or not to enable 2-bit mode during address (ADDR) state.\\\\ 0: Disable \\\\ 1: Enable \\\\ Can be configured in CONF state."]
pub type FADDR_DUAL_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `FADDR_QUAD` reader - Configures whether or not to enable 4-bit mode during address (ADDR) state. \\\\ 0: Disable \\\\ 1: Enable \\\\ Can be configured in CONF state."]
pub type FADDR_QUAD_R = crate::BitReader;
#[doc = "Field `FADDR_QUAD` writer - Configures whether or not to enable 4-bit mode during address (ADDR) state. \\\\ 0: Disable \\\\ 1: Enable \\\\ Can be configured in CONF state."]
pub type FADDR_QUAD_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `FADDR_OCT` reader - Configures whether or not to enable 8-bit mode during address (ADDR) state. \\\\ 0: Disable \\\\ 1: Enable \\\\ Can be configured in CONF state."]
pub type FADDR_OCT_R = crate::BitReader;
#[doc = "Field `FCMD_DUAL` reader - Configures whether or not to enable 2-bit mode during command (CMD) state. \\\\ 0: Disable \\\\ 1: Enable \\\\ Can be configured in CONF state."]
pub type FCMD_DUAL_R = crate::BitReader;
#[doc = "Field `FCMD_DUAL` writer - Configures whether or not to enable 2-bit mode during command (CMD) state. \\\\ 0: Disable \\\\ 1: Enable \\\\ Can be configured in CONF state."]
pub type FCMD_DUAL_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `FCMD_QUAD` reader - Configures whether or not to enable 4-bit mode during command (CMD) state. \\\\ 0: Disable \\\\ 1: Enable \\\\ Can be configured in CONF state."]
pub type FCMD_QUAD_R = crate::BitReader;
#[doc = "Field `FCMD_QUAD` writer - Configures whether or not to enable 4-bit mode during command (CMD) state. \\\\ 0: Disable \\\\ 1: Enable \\\\ Can be configured in CONF state."]
pub type FCMD_QUAD_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `FCMD_OCT` reader - Configures whether or not to enable 8-bit mode during command (CMD) state. \\\\ 0: Disable \\\\ 1: Enable \\\\ Can be configured in CONF state."]
pub type FCMD_OCT_R = crate::BitReader;
#[doc = "Field `FREAD_DUAL` reader - Configures whether or not to enable the 2-bit mode of read-data (DIN) state in read operations. \\\\ 0: Disable \\\\ 1: Enable \\\\ Can be configured in CONF state."]
pub type FREAD_DUAL_R = crate::BitReader;
#[doc = "Field `FREAD_DUAL` writer - Configures whether or not to enable the 2-bit mode of read-data (DIN) state in read operations. \\\\ 0: Disable \\\\ 1: Enable \\\\ Can be configured in CONF state."]
pub type FREAD_DUAL_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `FREAD_QUAD` reader - Configures whether or not to enable the 4-bit mode of read-data (DIN) state in read operations. \\\\ 0: Disable \\\\ 1: Enable \\\\ Can be configured in CONF state."]
pub type FREAD_QUAD_R = crate::BitReader;
#[doc = "Field `FREAD_QUAD` writer - Configures whether or not to enable the 4-bit mode of read-data (DIN) state in read operations. \\\\ 0: Disable \\\\ 1: Enable \\\\ Can be configured in CONF state."]
pub type FREAD_QUAD_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `FREAD_OCT` reader - Configures whether or not to enable the 8-bit mode of read-data (DIN) state in read operations. \\\\ 0: Disable \\\\ 1: Enable \\\\ Can be configured in CONF state."]
pub type FREAD_OCT_R = crate::BitReader;
#[doc = "Field `Q_POL` reader - Configures MISO line polarity. \\\\ 0: Low \\\\ 1: High \\\\ Can be configured in CONF state."]
pub type Q_POL_R = crate::BitReader;
#[doc = "Field `Q_POL` writer - Configures MISO line polarity. \\\\ 0: Low \\\\ 1: High \\\\ Can be configured in CONF state."]
pub type Q_POL_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `D_POL` reader - Configures MOSI line polarity. \\\\ 0: Low \\\\ 1: High \\\\ Can be configured in CONF state."]
pub type D_POL_R = crate::BitReader;
#[doc = "Field `D_POL` writer - Configures MOSI line polarity. \\\\ 0: Low \\\\ 1: High \\\\ Can be configured in CONF state."]
pub type D_POL_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `HOLD_POL` reader - Configures SPI_HOLD output value when SPI is in idle. \\\\ 0: Output low \\\\ 1: Output high \\\\ Can be configured in CONF state."]
pub type HOLD_POL_R = crate::BitReader;
#[doc = "Field `HOLD_POL` writer - Configures SPI_HOLD output value when SPI is in idle. \\\\ 0: Output low \\\\ 1: Output high \\\\ Can be configured in CONF state."]
pub type HOLD_POL_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `WP_POL` reader - Configures the output value of write-protect signal when SPI is in idle. \\\\ 0: Output low \\\\ 1: Output high \\\\ Can be configured in CONF state."]
pub type WP_POL_R = crate::BitReader;
#[doc = "Field `WP_POL` writer - Configures the output value of write-protect signal when SPI is in idle. \\\\ 0: Output low \\\\ 1: Output high \\\\ Can be configured in CONF state."]
pub type WP_POL_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `RD_BIT_ORDER` reader - Configures the bit order in read-data (MISO) state. \\\\ 0: MSB first \\\\ 1: LSB first \\\\ Can be configured in CONF state."]
pub type RD_BIT_ORDER_R = crate::FieldReader;
#[doc = "Field `RD_BIT_ORDER` writer - Configures the bit order in read-data (MISO) state. \\\\ 0: MSB first \\\\ 1: LSB first \\\\ Can be configured in CONF state."]
pub type RD_BIT_ORDER_W<'a, REG> = crate::FieldWriter<'a, REG, 2>;
#[doc = "Field `WR_BIT_ORDER` reader - Configures the bit order in command (CMD), address (ADDR), and write-data (MOSI) states. \\\\ 0: MSB first \\\\ 1: LSB first \\\\ Can be configured in CONF state."]
pub type WR_BIT_ORDER_R = crate::FieldReader;
#[doc = "Field `WR_BIT_ORDER` writer - Configures the bit order in command (CMD), address (ADDR), and write-data (MOSI) states. \\\\ 0: MSB first \\\\ 1: LSB first \\\\ Can be configured in CONF state."]
pub type WR_BIT_ORDER_W<'a, REG> = crate::FieldWriter<'a, REG, 2>;
impl R {
#[doc = "Bit 3 - Configures whether or not to output the FSPI bus signals in DUMMY state. \\\\ 0: Not output \\\\ 1: Output \\\\ Can be configured in CONF state."]
#[inline(always)]
pub fn dummy_out(&self) -> DUMMY_OUT_R {
DUMMY_OUT_R::new(((self.bits >> 3) & 1) != 0)
}
#[doc = "Bit 5 - Configures whether or not to enable 2-bit mode during address (ADDR) state.\\\\ 0: Disable \\\\ 1: Enable \\\\ Can be configured in CONF state."]
#[inline(always)]
pub fn faddr_dual(&self) -> FADDR_DUAL_R {
FADDR_DUAL_R::new(((self.bits >> 5) & 1) != 0)
}
#[doc = "Bit 6 - Configures whether or not to enable 4-bit mode during address (ADDR) state. \\\\ 0: Disable \\\\ 1: Enable \\\\ Can be configured in CONF state."]
#[inline(always)]
pub fn faddr_quad(&self) -> FADDR_QUAD_R {
FADDR_QUAD_R::new(((self.bits >> 6) & 1) != 0)
}
#[doc = "Bit 7 - Configures whether or not to enable 8-bit mode during address (ADDR) state. \\\\ 0: Disable \\\\ 1: Enable \\\\ Can be configured in CONF state."]
#[inline(always)]
pub fn faddr_oct(&self) -> FADDR_OCT_R {
FADDR_OCT_R::new(((self.bits >> 7) & 1) != 0)
}
#[doc = "Bit 8 - Configures whether or not to enable 2-bit mode during command (CMD) state. \\\\ 0: Disable \\\\ 1: Enable \\\\ Can be configured in CONF state."]
#[inline(always)]
pub fn fcmd_dual(&self) -> FCMD_DUAL_R {
FCMD_DUAL_R::new(((self.bits >> 8) & 1) != 0)
}
#[doc = "Bit 9 - Configures whether or not to enable 4-bit mode during command (CMD) state. \\\\ 0: Disable \\\\ 1: Enable \\\\ Can be configured in CONF state."]
#[inline(always)]
pub fn fcmd_quad(&self) -> FCMD_QUAD_R {
FCMD_QUAD_R::new(((self.bits >> 9) & 1) != 0)
}
#[doc = "Bit 10 - Configures whether or not to enable 8-bit mode during command (CMD) state. \\\\ 0: Disable \\\\ 1: Enable \\\\ Can be configured in CONF state."]
#[inline(always)]
pub fn fcmd_oct(&self) -> FCMD_OCT_R {
FCMD_OCT_R::new(((self.bits >> 10) & 1) != 0)
}
#[doc = "Bit 14 - Configures whether or not to enable the 2-bit mode of read-data (DIN) state in read operations. \\\\ 0: Disable \\\\ 1: Enable \\\\ Can be configured in CONF state."]
#[inline(always)]
pub fn fread_dual(&self) -> FREAD_DUAL_R {
FREAD_DUAL_R::new(((self.bits >> 14) & 1) != 0)
}
#[doc = "Bit 15 - Configures whether or not to enable the 4-bit mode of read-data (DIN) state in read operations. \\\\ 0: Disable \\\\ 1: Enable \\\\ Can be configured in CONF state."]
#[inline(always)]
pub fn fread_quad(&self) -> FREAD_QUAD_R {
FREAD_QUAD_R::new(((self.bits >> 15) & 1) != 0)
}
#[doc = "Bit 16 - Configures whether or not to enable the 8-bit mode of read-data (DIN) state in read operations. \\\\ 0: Disable \\\\ 1: Enable \\\\ Can be configured in CONF state."]
#[inline(always)]
pub fn fread_oct(&self) -> FREAD_OCT_R {
FREAD_OCT_R::new(((self.bits >> 16) & 1) != 0)
}
#[doc = "Bit 18 - Configures MISO line polarity. \\\\ 0: Low \\\\ 1: High \\\\ Can be configured in CONF state."]
#[inline(always)]
pub fn q_pol(&self) -> Q_POL_R {
Q_POL_R::new(((self.bits >> 18) & 1) != 0)
}
#[doc = "Bit 19 - Configures MOSI line polarity. \\\\ 0: Low \\\\ 1: High \\\\ Can be configured in CONF state."]
#[inline(always)]
pub fn d_pol(&self) -> D_POL_R {
D_POL_R::new(((self.bits >> 19) & 1) != 0)
}
#[doc = "Bit 20 - Configures SPI_HOLD output value when SPI is in idle. \\\\ 0: Output low \\\\ 1: Output high \\\\ Can be configured in CONF state."]
#[inline(always)]
pub fn hold_pol(&self) -> HOLD_POL_R {
HOLD_POL_R::new(((self.bits >> 20) & 1) != 0)
}
#[doc = "Bit 21 - Configures the output value of write-protect signal when SPI is in idle. \\\\ 0: Output low \\\\ 1: Output high \\\\ Can be configured in CONF state."]
#[inline(always)]
pub fn wp_pol(&self) -> WP_POL_R {
WP_POL_R::new(((self.bits >> 21) & 1) != 0)
}
#[doc = "Bits 23:24 - Configures the bit order in read-data (MISO) state. \\\\ 0: MSB first \\\\ 1: LSB first \\\\ Can be configured in CONF state."]
#[inline(always)]
pub fn rd_bit_order(&self) -> RD_BIT_ORDER_R {
RD_BIT_ORDER_R::new(((self.bits >> 23) & 3) as u8)
}
#[doc = "Bits 25:26 - Configures the bit order in command (CMD), address (ADDR), and write-data (MOSI) states. \\\\ 0: MSB first \\\\ 1: LSB first \\\\ Can be configured in CONF state."]
#[inline(always)]
pub fn wr_bit_order(&self) -> WR_BIT_ORDER_R {
WR_BIT_ORDER_R::new(((self.bits >> 25) & 3) as u8)
}
}
#[cfg(feature = "impl-register-debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
f.debug_struct("CTRL")
.field("dummy_out", &self.dummy_out())
.field("faddr_dual", &self.faddr_dual())
.field("faddr_quad", &self.faddr_quad())
.field("faddr_oct", &self.faddr_oct())
.field("fcmd_dual", &self.fcmd_dual())
.field("fcmd_quad", &self.fcmd_quad())
.field("fcmd_oct", &self.fcmd_oct())
.field("fread_dual", &self.fread_dual())
.field("fread_quad", &self.fread_quad())
.field("fread_oct", &self.fread_oct())
.field("q_pol", &self.q_pol())
.field("d_pol", &self.d_pol())
.field("hold_pol", &self.hold_pol())
.field("wp_pol", &self.wp_pol())
.field("rd_bit_order", &self.rd_bit_order())
.field("wr_bit_order", &self.wr_bit_order())
.finish()
}
}
impl W {
#[doc = "Bit 3 - Configures whether or not to output the FSPI bus signals in DUMMY state. \\\\ 0: Not output \\\\ 1: Output \\\\ Can be configured in CONF state."]
#[inline(always)]
pub fn dummy_out(&mut self) -> DUMMY_OUT_W<'_, CTRL_SPEC> {
DUMMY_OUT_W::new(self, 3)
}
#[doc = "Bit 5 - Configures whether or not to enable 2-bit mode during address (ADDR) state.\\\\ 0: Disable \\\\ 1: Enable \\\\ Can be configured in CONF state."]
#[inline(always)]
pub fn faddr_dual(&mut self) -> FADDR_DUAL_W<'_, CTRL_SPEC> {
FADDR_DUAL_W::new(self, 5)
}
#[doc = "Bit 6 - Configures whether or not to enable 4-bit mode during address (ADDR) state. \\\\ 0: Disable \\\\ 1: Enable \\\\ Can be configured in CONF state."]
#[inline(always)]
pub fn faddr_quad(&mut self) -> FADDR_QUAD_W<'_, CTRL_SPEC> {
FADDR_QUAD_W::new(self, 6)
}
#[doc = "Bit 8 - Configures whether or not to enable 2-bit mode during command (CMD) state. \\\\ 0: Disable \\\\ 1: Enable \\\\ Can be configured in CONF state."]
#[inline(always)]
pub fn fcmd_dual(&mut self) -> FCMD_DUAL_W<'_, CTRL_SPEC> {
FCMD_DUAL_W::new(self, 8)
}
#[doc = "Bit 9 - Configures whether or not to enable 4-bit mode during command (CMD) state. \\\\ 0: Disable \\\\ 1: Enable \\\\ Can be configured in CONF state."]
#[inline(always)]
pub fn fcmd_quad(&mut self) -> FCMD_QUAD_W<'_, CTRL_SPEC> {
FCMD_QUAD_W::new(self, 9)
}
#[doc = "Bit 14 - Configures whether or not to enable the 2-bit mode of read-data (DIN) state in read operations. \\\\ 0: Disable \\\\ 1: Enable \\\\ Can be configured in CONF state."]
#[inline(always)]
pub fn fread_dual(&mut self) -> FREAD_DUAL_W<'_, CTRL_SPEC> {
FREAD_DUAL_W::new(self, 14)
}
#[doc = "Bit 15 - Configures whether or not to enable the 4-bit mode of read-data (DIN) state in read operations. \\\\ 0: Disable \\\\ 1: Enable \\\\ Can be configured in CONF state."]
#[inline(always)]
pub fn fread_quad(&mut self) -> FREAD_QUAD_W<'_, CTRL_SPEC> {
FREAD_QUAD_W::new(self, 15)
}
#[doc = "Bit 18 - Configures MISO line polarity. \\\\ 0: Low \\\\ 1: High \\\\ Can be configured in CONF state."]
#[inline(always)]
pub fn q_pol(&mut self) -> Q_POL_W<'_, CTRL_SPEC> {
Q_POL_W::new(self, 18)
}
#[doc = "Bit 19 - Configures MOSI line polarity. \\\\ 0: Low \\\\ 1: High \\\\ Can be configured in CONF state."]
#[inline(always)]
pub fn d_pol(&mut self) -> D_POL_W<'_, CTRL_SPEC> {
D_POL_W::new(self, 19)
}
#[doc = "Bit 20 - Configures SPI_HOLD output value when SPI is in idle. \\\\ 0: Output low \\\\ 1: Output high \\\\ Can be configured in CONF state."]
#[inline(always)]
pub fn hold_pol(&mut self) -> HOLD_POL_W<'_, CTRL_SPEC> {
HOLD_POL_W::new(self, 20)
}
#[doc = "Bit 21 - Configures the output value of write-protect signal when SPI is in idle. \\\\ 0: Output low \\\\ 1: Output high \\\\ Can be configured in CONF state."]
#[inline(always)]
pub fn wp_pol(&mut self) -> WP_POL_W<'_, CTRL_SPEC> {
WP_POL_W::new(self, 21)
}
#[doc = "Bits 23:24 - Configures the bit order in read-data (MISO) state. \\\\ 0: MSB first \\\\ 1: LSB first \\\\ Can be configured in CONF state."]
#[inline(always)]
pub fn rd_bit_order(&mut self) -> RD_BIT_ORDER_W<'_, CTRL_SPEC> {
RD_BIT_ORDER_W::new(self, 23)
}
#[doc = "Bits 25:26 - Configures the bit order in command (CMD), address (ADDR), and write-data (MOSI) states. \\\\ 0: MSB first \\\\ 1: LSB first \\\\ Can be configured in CONF state."]
#[inline(always)]
pub fn wr_bit_order(&mut self) -> WR_BIT_ORDER_W<'_, CTRL_SPEC> {
WR_BIT_ORDER_W::new(self, 25)
}
}
#[doc = "SPI control register\n\nYou can [`read`](crate::Reg::read) this register and get [`ctrl::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`ctrl::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
pub struct CTRL_SPEC;
impl crate::RegisterSpec for CTRL_SPEC {
type Ux = u32;
}
#[doc = "`read()` method returns [`ctrl::R`](R) reader structure"]
impl crate::Readable for CTRL_SPEC {}
#[doc = "`write(|w| ..)` method takes [`ctrl::W`](W) writer structure"]
impl crate::Writable for CTRL_SPEC {
type Safety = crate::Unsafe;
}
#[doc = "`reset()` method sets CTRL to value 0x003c_0000"]
impl crate::Resettable for CTRL_SPEC {
const RESET_VALUE: u32 = 0x003c_0000;
}