esp32c5 0.2.1

Peripheral access crate for the ESP32-C5
Documentation 
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165

#[repr(C)]
#[cfg_attr(feature = "impl-register-debug", derive(Debug))]
#[doc = "Register block"]
pub struct RegisterBlock {
    tx_inst_cfg0: TX_INST_CFG0,
    tx_inst_cfg1: TX_INST_CFG1,
    rx_inst_cfg0: RX_INST_CFG0,
    rx_inst_cfg1: RX_INST_CFG1,
    tx_lut_cfg0: TX_LUT_CFG0,
    tx_lut_cfg1: TX_LUT_CFG1,
    rx_lut_cfg0: RX_LUT_CFG0,
    rx_lut_cfg1: RX_LUT_CFG1,
    tx_tailing_bits: TX_TAILING_BITS,
    rx_tailing_bits: RX_TAILING_BITS,
    tx_ctrl: TX_CTRL,
    rx_ctrl: RX_CTRL,
    tx_state: TX_STATE,
    rx_state: RX_STATE,
    _reserved14: [u8; 0xc0],
    sys: SYS,
    version: VERSION,
}
impl RegisterBlock {
    #[doc = "0x00 - Control and configuration registers"]
    #[inline(always)]
    pub const fn tx_inst_cfg0(&self) -> &TX_INST_CFG0 {
        &self.tx_inst_cfg0
    }
    #[doc = "0x04 - Control and configuration registers"]
    #[inline(always)]
    pub const fn tx_inst_cfg1(&self) -> &TX_INST_CFG1 {
        &self.tx_inst_cfg1
    }
    #[doc = "0x08 - Control and configuration registers"]
    #[inline(always)]
    pub const fn rx_inst_cfg0(&self) -> &RX_INST_CFG0 {
        &self.rx_inst_cfg0
    }
    #[doc = "0x0c - Control and configuration registers"]
    #[inline(always)]
    pub const fn rx_inst_cfg1(&self) -> &RX_INST_CFG1 {
        &self.rx_inst_cfg1
    }
    #[doc = "0x10 - Control and configuration registers"]
    #[inline(always)]
    pub const fn tx_lut_cfg0(&self) -> &TX_LUT_CFG0 {
        &self.tx_lut_cfg0
    }
    #[doc = "0x14 - Control and configuration registers"]
    #[inline(always)]
    pub const fn tx_lut_cfg1(&self) -> &TX_LUT_CFG1 {
        &self.tx_lut_cfg1
    }
    #[doc = "0x18 - Control and configuration registers"]
    #[inline(always)]
    pub const fn rx_lut_cfg0(&self) -> &RX_LUT_CFG0 {
        &self.rx_lut_cfg0
    }
    #[doc = "0x1c - Control and configuration registers"]
    #[inline(always)]
    pub const fn rx_lut_cfg1(&self) -> &RX_LUT_CFG1 {
        &self.rx_lut_cfg1
    }
    #[doc = "0x20 - Control and configuration registers"]
    #[inline(always)]
    pub const fn tx_tailing_bits(&self) -> &TX_TAILING_BITS {
        &self.tx_tailing_bits
    }
    #[doc = "0x24 - Control and configuration registers"]
    #[inline(always)]
    pub const fn rx_tailing_bits(&self) -> &RX_TAILING_BITS {
        &self.rx_tailing_bits
    }
    #[doc = "0x28 - Control and configuration registers"]
    #[inline(always)]
    pub const fn tx_ctrl(&self) -> &TX_CTRL {
        &self.tx_ctrl
    }
    #[doc = "0x2c - Control and configuration registers"]
    #[inline(always)]
    pub const fn rx_ctrl(&self) -> &RX_CTRL {
        &self.rx_ctrl
    }
    #[doc = "0x30 - Status registers"]
    #[inline(always)]
    pub const fn tx_state(&self) -> &TX_STATE {
        &self.tx_state
    }
    #[doc = "0x34 - Status registers"]
    #[inline(always)]
    pub const fn rx_state(&self) -> &RX_STATE {
        &self.rx_state
    }
    #[doc = "0xf8 - Control and configuration registers"]
    #[inline(always)]
    pub const fn sys(&self) -> &SYS {
        &self.sys
    }
    #[doc = "0xfc - Control and configuration registers"]
    #[inline(always)]
    pub const fn version(&self) -> &VERSION {
        &self.version
    }
}
#[doc = "TX_INST_CFG0 (rw) register accessor: Control and configuration registers\n\nYou can [`read`](crate::Reg::read) this register and get [`tx_inst_cfg0::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`tx_inst_cfg0::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tx_inst_cfg0`] module"]
pub type TX_INST_CFG0 = crate::Reg<tx_inst_cfg0::TX_INST_CFG0_SPEC>;
#[doc = "Control and configuration registers"]
pub mod tx_inst_cfg0;
#[doc = "TX_INST_CFG1 (rw) register accessor: Control and configuration registers\n\nYou can [`read`](crate::Reg::read) this register and get [`tx_inst_cfg1::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`tx_inst_cfg1::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tx_inst_cfg1`] module"]
pub type TX_INST_CFG1 = crate::Reg<tx_inst_cfg1::TX_INST_CFG1_SPEC>;
#[doc = "Control and configuration registers"]
pub mod tx_inst_cfg1;
#[doc = "RX_INST_CFG0 (rw) register accessor: Control and configuration registers\n\nYou can [`read`](crate::Reg::read) this register and get [`rx_inst_cfg0::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`rx_inst_cfg0::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@rx_inst_cfg0`] module"]
pub type RX_INST_CFG0 = crate::Reg<rx_inst_cfg0::RX_INST_CFG0_SPEC>;
#[doc = "Control and configuration registers"]
pub mod rx_inst_cfg0;
#[doc = "RX_INST_CFG1 (rw) register accessor: Control and configuration registers\n\nYou can [`read`](crate::Reg::read) this register and get [`rx_inst_cfg1::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`rx_inst_cfg1::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@rx_inst_cfg1`] module"]
pub type RX_INST_CFG1 = crate::Reg<rx_inst_cfg1::RX_INST_CFG1_SPEC>;
#[doc = "Control and configuration registers"]
pub mod rx_inst_cfg1;
#[doc = "TX_LUT_CFG0 (rw) register accessor: Control and configuration registers\n\nYou can [`read`](crate::Reg::read) this register and get [`tx_lut_cfg0::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`tx_lut_cfg0::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tx_lut_cfg0`] module"]
pub type TX_LUT_CFG0 = crate::Reg<tx_lut_cfg0::TX_LUT_CFG0_SPEC>;
#[doc = "Control and configuration registers"]
pub mod tx_lut_cfg0;
#[doc = "TX_LUT_CFG1 (rw) register accessor: Control and configuration registers\n\nYou can [`read`](crate::Reg::read) this register and get [`tx_lut_cfg1::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`tx_lut_cfg1::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tx_lut_cfg1`] module"]
pub type TX_LUT_CFG1 = crate::Reg<tx_lut_cfg1::TX_LUT_CFG1_SPEC>;
#[doc = "Control and configuration registers"]
pub mod tx_lut_cfg1;
#[doc = "RX_LUT_CFG0 (rw) register accessor: Control and configuration registers\n\nYou can [`read`](crate::Reg::read) this register and get [`rx_lut_cfg0::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`rx_lut_cfg0::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@rx_lut_cfg0`] module"]
pub type RX_LUT_CFG0 = crate::Reg<rx_lut_cfg0::RX_LUT_CFG0_SPEC>;
#[doc = "Control and configuration registers"]
pub mod rx_lut_cfg0;
#[doc = "RX_LUT_CFG1 (rw) register accessor: Control and configuration registers\n\nYou can [`read`](crate::Reg::read) this register and get [`rx_lut_cfg1::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`rx_lut_cfg1::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@rx_lut_cfg1`] module"]
pub type RX_LUT_CFG1 = crate::Reg<rx_lut_cfg1::RX_LUT_CFG1_SPEC>;
#[doc = "Control and configuration registers"]
pub mod rx_lut_cfg1;
#[doc = "TX_TAILING_BITS (rw) register accessor: Control and configuration registers\n\nYou can [`read`](crate::Reg::read) this register and get [`tx_tailing_bits::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`tx_tailing_bits::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tx_tailing_bits`] module"]
pub type TX_TAILING_BITS = crate::Reg<tx_tailing_bits::TX_TAILING_BITS_SPEC>;
#[doc = "Control and configuration registers"]
pub mod tx_tailing_bits;
#[doc = "RX_TAILING_BITS (rw) register accessor: Control and configuration registers\n\nYou can [`read`](crate::Reg::read) this register and get [`rx_tailing_bits::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`rx_tailing_bits::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@rx_tailing_bits`] module"]
pub type RX_TAILING_BITS = crate::Reg<rx_tailing_bits::RX_TAILING_BITS_SPEC>;
#[doc = "Control and configuration registers"]
pub mod rx_tailing_bits;
#[doc = "TX_CTRL (rw) register accessor: Control and configuration registers\n\nYou can [`read`](crate::Reg::read) this register and get [`tx_ctrl::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`tx_ctrl::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tx_ctrl`] module"]
pub type TX_CTRL = crate::Reg<tx_ctrl::TX_CTRL_SPEC>;
#[doc = "Control and configuration registers"]
pub mod tx_ctrl;
#[doc = "RX_CTRL (rw) register accessor: Control and configuration registers\n\nYou can [`read`](crate::Reg::read) this register and get [`rx_ctrl::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`rx_ctrl::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@rx_ctrl`] module"]
pub type RX_CTRL = crate::Reg<rx_ctrl::RX_CTRL_SPEC>;
#[doc = "Control and configuration registers"]
pub mod rx_ctrl;
#[doc = "TX_STATE (rw) register accessor: Status registers\n\nYou can [`read`](crate::Reg::read) this register and get [`tx_state::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`tx_state::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tx_state`] module"]
pub type TX_STATE = crate::Reg<tx_state::TX_STATE_SPEC>;
#[doc = "Status registers"]
pub mod tx_state;
#[doc = "RX_STATE (rw) register accessor: Status registers\n\nYou can [`read`](crate::Reg::read) this register and get [`rx_state::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`rx_state::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@rx_state`] module"]
pub type RX_STATE = crate::Reg<rx_state::RX_STATE_SPEC>;
#[doc = "Status registers"]
pub mod rx_state;
#[doc = "SYS (rw) register accessor: Control and configuration registers\n\nYou can [`read`](crate::Reg::read) this register and get [`sys::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`sys::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@sys`] module"]
pub type SYS = crate::Reg<sys::SYS_SPEC>;
#[doc = "Control and configuration registers"]
pub mod sys;
pub use crate::aes::{date as version, DATE as VERSION};