#[doc = "Register `EVT_ST0` reader"]
pub type R = crate::R<EVT_ST0_SPEC>;
#[doc = "Register `EVT_ST0` writer"]
pub type W = crate::W<EVT_ST0_SPEC>;
#[doc = "Field `GPIO_EVT_CH0_RISE_EDGE_ST` reader - Represents GPIO_evt_ch0_rise_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
pub type GPIO_EVT_CH0_RISE_EDGE_ST_R = crate::BitReader;
#[doc = "Field `GPIO_EVT_CH0_RISE_EDGE_ST` writer - Represents GPIO_evt_ch0_rise_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
pub type GPIO_EVT_CH0_RISE_EDGE_ST_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `GPIO_EVT_CH1_RISE_EDGE_ST` reader - Represents GPIO_evt_ch1_rise_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
pub type GPIO_EVT_CH1_RISE_EDGE_ST_R = crate::BitReader;
#[doc = "Field `GPIO_EVT_CH1_RISE_EDGE_ST` writer - Represents GPIO_evt_ch1_rise_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
pub type GPIO_EVT_CH1_RISE_EDGE_ST_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `GPIO_EVT_CH2_RISE_EDGE_ST` reader - Represents GPIO_evt_ch2_rise_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
pub type GPIO_EVT_CH2_RISE_EDGE_ST_R = crate::BitReader;
#[doc = "Field `GPIO_EVT_CH2_RISE_EDGE_ST` writer - Represents GPIO_evt_ch2_rise_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
pub type GPIO_EVT_CH2_RISE_EDGE_ST_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `GPIO_EVT_CH3_RISE_EDGE_ST` reader - Represents GPIO_evt_ch3_rise_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
pub type GPIO_EVT_CH3_RISE_EDGE_ST_R = crate::BitReader;
#[doc = "Field `GPIO_EVT_CH3_RISE_EDGE_ST` writer - Represents GPIO_evt_ch3_rise_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
pub type GPIO_EVT_CH3_RISE_EDGE_ST_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `GPIO_EVT_CH4_RISE_EDGE_ST` reader - Represents GPIO_evt_ch4_rise_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
pub type GPIO_EVT_CH4_RISE_EDGE_ST_R = crate::BitReader;
#[doc = "Field `GPIO_EVT_CH4_RISE_EDGE_ST` writer - Represents GPIO_evt_ch4_rise_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
pub type GPIO_EVT_CH4_RISE_EDGE_ST_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `GPIO_EVT_CH5_RISE_EDGE_ST` reader - Represents GPIO_evt_ch5_rise_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
pub type GPIO_EVT_CH5_RISE_EDGE_ST_R = crate::BitReader;
#[doc = "Field `GPIO_EVT_CH5_RISE_EDGE_ST` writer - Represents GPIO_evt_ch5_rise_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
pub type GPIO_EVT_CH5_RISE_EDGE_ST_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `GPIO_EVT_CH6_RISE_EDGE_ST` reader - Represents GPIO_evt_ch6_rise_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
pub type GPIO_EVT_CH6_RISE_EDGE_ST_R = crate::BitReader;
#[doc = "Field `GPIO_EVT_CH6_RISE_EDGE_ST` writer - Represents GPIO_evt_ch6_rise_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
pub type GPIO_EVT_CH6_RISE_EDGE_ST_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `GPIO_EVT_CH7_RISE_EDGE_ST` reader - Represents GPIO_evt_ch7_rise_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
pub type GPIO_EVT_CH7_RISE_EDGE_ST_R = crate::BitReader;
#[doc = "Field `GPIO_EVT_CH7_RISE_EDGE_ST` writer - Represents GPIO_evt_ch7_rise_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
pub type GPIO_EVT_CH7_RISE_EDGE_ST_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `GPIO_EVT_CH0_FALL_EDGE_ST` reader - Represents GPIO_evt_ch0_fall_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
pub type GPIO_EVT_CH0_FALL_EDGE_ST_R = crate::BitReader;
#[doc = "Field `GPIO_EVT_CH0_FALL_EDGE_ST` writer - Represents GPIO_evt_ch0_fall_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
pub type GPIO_EVT_CH0_FALL_EDGE_ST_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `GPIO_EVT_CH1_FALL_EDGE_ST` reader - Represents GPIO_evt_ch1_fall_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
pub type GPIO_EVT_CH1_FALL_EDGE_ST_R = crate::BitReader;
#[doc = "Field `GPIO_EVT_CH1_FALL_EDGE_ST` writer - Represents GPIO_evt_ch1_fall_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
pub type GPIO_EVT_CH1_FALL_EDGE_ST_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `GPIO_EVT_CH2_FALL_EDGE_ST` reader - Represents GPIO_evt_ch2_fall_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
pub type GPIO_EVT_CH2_FALL_EDGE_ST_R = crate::BitReader;
#[doc = "Field `GPIO_EVT_CH2_FALL_EDGE_ST` writer - Represents GPIO_evt_ch2_fall_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
pub type GPIO_EVT_CH2_FALL_EDGE_ST_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `GPIO_EVT_CH3_FALL_EDGE_ST` reader - Represents GPIO_evt_ch3_fall_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
pub type GPIO_EVT_CH3_FALL_EDGE_ST_R = crate::BitReader;
#[doc = "Field `GPIO_EVT_CH3_FALL_EDGE_ST` writer - Represents GPIO_evt_ch3_fall_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
pub type GPIO_EVT_CH3_FALL_EDGE_ST_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `GPIO_EVT_CH4_FALL_EDGE_ST` reader - Represents GPIO_evt_ch4_fall_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
pub type GPIO_EVT_CH4_FALL_EDGE_ST_R = crate::BitReader;
#[doc = "Field `GPIO_EVT_CH4_FALL_EDGE_ST` writer - Represents GPIO_evt_ch4_fall_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
pub type GPIO_EVT_CH4_FALL_EDGE_ST_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `GPIO_EVT_CH5_FALL_EDGE_ST` reader - Represents GPIO_evt_ch5_fall_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
pub type GPIO_EVT_CH5_FALL_EDGE_ST_R = crate::BitReader;
#[doc = "Field `GPIO_EVT_CH5_FALL_EDGE_ST` writer - Represents GPIO_evt_ch5_fall_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
pub type GPIO_EVT_CH5_FALL_EDGE_ST_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `GPIO_EVT_CH6_FALL_EDGE_ST` reader - Represents GPIO_evt_ch6_fall_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
pub type GPIO_EVT_CH6_FALL_EDGE_ST_R = crate::BitReader;
#[doc = "Field `GPIO_EVT_CH6_FALL_EDGE_ST` writer - Represents GPIO_evt_ch6_fall_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
pub type GPIO_EVT_CH6_FALL_EDGE_ST_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `GPIO_EVT_CH7_FALL_EDGE_ST` reader - Represents GPIO_evt_ch7_fall_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
pub type GPIO_EVT_CH7_FALL_EDGE_ST_R = crate::BitReader;
#[doc = "Field `GPIO_EVT_CH7_FALL_EDGE_ST` writer - Represents GPIO_evt_ch7_fall_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
pub type GPIO_EVT_CH7_FALL_EDGE_ST_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `GPIO_EVT_CH0_ANY_EDGE_ST` reader - Represents GPIO_evt_ch0_any_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
pub type GPIO_EVT_CH0_ANY_EDGE_ST_R = crate::BitReader;
#[doc = "Field `GPIO_EVT_CH0_ANY_EDGE_ST` writer - Represents GPIO_evt_ch0_any_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
pub type GPIO_EVT_CH0_ANY_EDGE_ST_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `GPIO_EVT_CH1_ANY_EDGE_ST` reader - Represents GPIO_evt_ch1_any_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
pub type GPIO_EVT_CH1_ANY_EDGE_ST_R = crate::BitReader;
#[doc = "Field `GPIO_EVT_CH1_ANY_EDGE_ST` writer - Represents GPIO_evt_ch1_any_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
pub type GPIO_EVT_CH1_ANY_EDGE_ST_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `GPIO_EVT_CH2_ANY_EDGE_ST` reader - Represents GPIO_evt_ch2_any_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
pub type GPIO_EVT_CH2_ANY_EDGE_ST_R = crate::BitReader;
#[doc = "Field `GPIO_EVT_CH2_ANY_EDGE_ST` writer - Represents GPIO_evt_ch2_any_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
pub type GPIO_EVT_CH2_ANY_EDGE_ST_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `GPIO_EVT_CH3_ANY_EDGE_ST` reader - Represents GPIO_evt_ch3_any_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
pub type GPIO_EVT_CH3_ANY_EDGE_ST_R = crate::BitReader;
#[doc = "Field `GPIO_EVT_CH3_ANY_EDGE_ST` writer - Represents GPIO_evt_ch3_any_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
pub type GPIO_EVT_CH3_ANY_EDGE_ST_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `GPIO_EVT_CH4_ANY_EDGE_ST` reader - Represents GPIO_evt_ch4_any_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
pub type GPIO_EVT_CH4_ANY_EDGE_ST_R = crate::BitReader;
#[doc = "Field `GPIO_EVT_CH4_ANY_EDGE_ST` writer - Represents GPIO_evt_ch4_any_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
pub type GPIO_EVT_CH4_ANY_EDGE_ST_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `GPIO_EVT_CH5_ANY_EDGE_ST` reader - Represents GPIO_evt_ch5_any_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
pub type GPIO_EVT_CH5_ANY_EDGE_ST_R = crate::BitReader;
#[doc = "Field `GPIO_EVT_CH5_ANY_EDGE_ST` writer - Represents GPIO_evt_ch5_any_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
pub type GPIO_EVT_CH5_ANY_EDGE_ST_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `GPIO_EVT_CH6_ANY_EDGE_ST` reader - Represents GPIO_evt_ch6_any_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
pub type GPIO_EVT_CH6_ANY_EDGE_ST_R = crate::BitReader;
#[doc = "Field `GPIO_EVT_CH6_ANY_EDGE_ST` writer - Represents GPIO_evt_ch6_any_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
pub type GPIO_EVT_CH6_ANY_EDGE_ST_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `GPIO_EVT_CH7_ANY_EDGE_ST` reader - Represents GPIO_evt_ch7_any_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
pub type GPIO_EVT_CH7_ANY_EDGE_ST_R = crate::BitReader;
#[doc = "Field `GPIO_EVT_CH7_ANY_EDGE_ST` writer - Represents GPIO_evt_ch7_any_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
pub type GPIO_EVT_CH7_ANY_EDGE_ST_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `GPIO_EVT_ZERO_DET_POS0_ST` reader - Represents GPIO_evt_zero_det_pos0 trigger status.\\\\0: Not triggered\\\\1: Triggered"]
pub type GPIO_EVT_ZERO_DET_POS0_ST_R = crate::BitReader;
#[doc = "Field `GPIO_EVT_ZERO_DET_POS0_ST` writer - Represents GPIO_evt_zero_det_pos0 trigger status.\\\\0: Not triggered\\\\1: Triggered"]
pub type GPIO_EVT_ZERO_DET_POS0_ST_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `GPIO_EVT_ZERO_DET_NEG0_ST` reader - Represents GPIO_evt_zero_det_neg0 trigger status.\\\\0: Not triggered\\\\1: Triggered"]
pub type GPIO_EVT_ZERO_DET_NEG0_ST_R = crate::BitReader;
#[doc = "Field `GPIO_EVT_ZERO_DET_NEG0_ST` writer - Represents GPIO_evt_zero_det_neg0 trigger status.\\\\0: Not triggered\\\\1: Triggered"]
pub type GPIO_EVT_ZERO_DET_NEG0_ST_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `LEDC_EVT_DUTY_CHNG_END_CH0_ST` reader - Represents LEDC_evt_duty_chng_end_ch0 trigger status.\\\\0: Not triggered\\\\1: Triggered"]
pub type LEDC_EVT_DUTY_CHNG_END_CH0_ST_R = crate::BitReader;
#[doc = "Field `LEDC_EVT_DUTY_CHNG_END_CH0_ST` writer - Represents LEDC_evt_duty_chng_end_ch0 trigger status.\\\\0: Not triggered\\\\1: Triggered"]
pub type LEDC_EVT_DUTY_CHNG_END_CH0_ST_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `LEDC_EVT_DUTY_CHNG_END_CH1_ST` reader - Represents LEDC_evt_duty_chng_end_ch1 trigger status.\\\\0: Not triggered\\\\1: Triggered"]
pub type LEDC_EVT_DUTY_CHNG_END_CH1_ST_R = crate::BitReader;
#[doc = "Field `LEDC_EVT_DUTY_CHNG_END_CH1_ST` writer - Represents LEDC_evt_duty_chng_end_ch1 trigger status.\\\\0: Not triggered\\\\1: Triggered"]
pub type LEDC_EVT_DUTY_CHNG_END_CH1_ST_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `LEDC_EVT_DUTY_CHNG_END_CH2_ST` reader - Represents LEDC_evt_duty_chng_end_ch2 trigger status.\\\\0: Not triggered\\\\1: Triggered"]
pub type LEDC_EVT_DUTY_CHNG_END_CH2_ST_R = crate::BitReader;
#[doc = "Field `LEDC_EVT_DUTY_CHNG_END_CH2_ST` writer - Represents LEDC_evt_duty_chng_end_ch2 trigger status.\\\\0: Not triggered\\\\1: Triggered"]
pub type LEDC_EVT_DUTY_CHNG_END_CH2_ST_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `LEDC_EVT_DUTY_CHNG_END_CH3_ST` reader - Represents LEDC_evt_duty_chng_end_ch3 trigger status.\\\\0: Not triggered\\\\1: Triggered"]
pub type LEDC_EVT_DUTY_CHNG_END_CH3_ST_R = crate::BitReader;
#[doc = "Field `LEDC_EVT_DUTY_CHNG_END_CH3_ST` writer - Represents LEDC_evt_duty_chng_end_ch3 trigger status.\\\\0: Not triggered\\\\1: Triggered"]
pub type LEDC_EVT_DUTY_CHNG_END_CH3_ST_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `LEDC_EVT_DUTY_CHNG_END_CH4_ST` reader - Represents LEDC_evt_duty_chng_end_ch4 trigger status.\\\\0: Not triggered\\\\1: Triggered"]
pub type LEDC_EVT_DUTY_CHNG_END_CH4_ST_R = crate::BitReader;
#[doc = "Field `LEDC_EVT_DUTY_CHNG_END_CH4_ST` writer - Represents LEDC_evt_duty_chng_end_ch4 trigger status.\\\\0: Not triggered\\\\1: Triggered"]
pub type LEDC_EVT_DUTY_CHNG_END_CH4_ST_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `LEDC_EVT_DUTY_CHNG_END_CH5_ST` reader - Represents LEDC_evt_duty_chng_end_ch5 trigger status.\\\\0: Not triggered\\\\1: Triggered"]
pub type LEDC_EVT_DUTY_CHNG_END_CH5_ST_R = crate::BitReader;
#[doc = "Field `LEDC_EVT_DUTY_CHNG_END_CH5_ST` writer - Represents LEDC_evt_duty_chng_end_ch5 trigger status.\\\\0: Not triggered\\\\1: Triggered"]
pub type LEDC_EVT_DUTY_CHNG_END_CH5_ST_W<'a, REG> = crate::BitWriter<'a, REG>;
impl R {
#[doc = "Bit 0 - Represents GPIO_evt_ch0_rise_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
#[inline(always)]
pub fn gpio_evt_ch0_rise_edge_st(&self) -> GPIO_EVT_CH0_RISE_EDGE_ST_R {
GPIO_EVT_CH0_RISE_EDGE_ST_R::new((self.bits & 1) != 0)
}
#[doc = "Bit 1 - Represents GPIO_evt_ch1_rise_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
#[inline(always)]
pub fn gpio_evt_ch1_rise_edge_st(&self) -> GPIO_EVT_CH1_RISE_EDGE_ST_R {
GPIO_EVT_CH1_RISE_EDGE_ST_R::new(((self.bits >> 1) & 1) != 0)
}
#[doc = "Bit 2 - Represents GPIO_evt_ch2_rise_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
#[inline(always)]
pub fn gpio_evt_ch2_rise_edge_st(&self) -> GPIO_EVT_CH2_RISE_EDGE_ST_R {
GPIO_EVT_CH2_RISE_EDGE_ST_R::new(((self.bits >> 2) & 1) != 0)
}
#[doc = "Bit 3 - Represents GPIO_evt_ch3_rise_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
#[inline(always)]
pub fn gpio_evt_ch3_rise_edge_st(&self) -> GPIO_EVT_CH3_RISE_EDGE_ST_R {
GPIO_EVT_CH3_RISE_EDGE_ST_R::new(((self.bits >> 3) & 1) != 0)
}
#[doc = "Bit 4 - Represents GPIO_evt_ch4_rise_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
#[inline(always)]
pub fn gpio_evt_ch4_rise_edge_st(&self) -> GPIO_EVT_CH4_RISE_EDGE_ST_R {
GPIO_EVT_CH4_RISE_EDGE_ST_R::new(((self.bits >> 4) & 1) != 0)
}
#[doc = "Bit 5 - Represents GPIO_evt_ch5_rise_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
#[inline(always)]
pub fn gpio_evt_ch5_rise_edge_st(&self) -> GPIO_EVT_CH5_RISE_EDGE_ST_R {
GPIO_EVT_CH5_RISE_EDGE_ST_R::new(((self.bits >> 5) & 1) != 0)
}
#[doc = "Bit 6 - Represents GPIO_evt_ch6_rise_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
#[inline(always)]
pub fn gpio_evt_ch6_rise_edge_st(&self) -> GPIO_EVT_CH6_RISE_EDGE_ST_R {
GPIO_EVT_CH6_RISE_EDGE_ST_R::new(((self.bits >> 6) & 1) != 0)
}
#[doc = "Bit 7 - Represents GPIO_evt_ch7_rise_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
#[inline(always)]
pub fn gpio_evt_ch7_rise_edge_st(&self) -> GPIO_EVT_CH7_RISE_EDGE_ST_R {
GPIO_EVT_CH7_RISE_EDGE_ST_R::new(((self.bits >> 7) & 1) != 0)
}
#[doc = "Bit 8 - Represents GPIO_evt_ch0_fall_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
#[inline(always)]
pub fn gpio_evt_ch0_fall_edge_st(&self) -> GPIO_EVT_CH0_FALL_EDGE_ST_R {
GPIO_EVT_CH0_FALL_EDGE_ST_R::new(((self.bits >> 8) & 1) != 0)
}
#[doc = "Bit 9 - Represents GPIO_evt_ch1_fall_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
#[inline(always)]
pub fn gpio_evt_ch1_fall_edge_st(&self) -> GPIO_EVT_CH1_FALL_EDGE_ST_R {
GPIO_EVT_CH1_FALL_EDGE_ST_R::new(((self.bits >> 9) & 1) != 0)
}
#[doc = "Bit 10 - Represents GPIO_evt_ch2_fall_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
#[inline(always)]
pub fn gpio_evt_ch2_fall_edge_st(&self) -> GPIO_EVT_CH2_FALL_EDGE_ST_R {
GPIO_EVT_CH2_FALL_EDGE_ST_R::new(((self.bits >> 10) & 1) != 0)
}
#[doc = "Bit 11 - Represents GPIO_evt_ch3_fall_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
#[inline(always)]
pub fn gpio_evt_ch3_fall_edge_st(&self) -> GPIO_EVT_CH3_FALL_EDGE_ST_R {
GPIO_EVT_CH3_FALL_EDGE_ST_R::new(((self.bits >> 11) & 1) != 0)
}
#[doc = "Bit 12 - Represents GPIO_evt_ch4_fall_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
#[inline(always)]
pub fn gpio_evt_ch4_fall_edge_st(&self) -> GPIO_EVT_CH4_FALL_EDGE_ST_R {
GPIO_EVT_CH4_FALL_EDGE_ST_R::new(((self.bits >> 12) & 1) != 0)
}
#[doc = "Bit 13 - Represents GPIO_evt_ch5_fall_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
#[inline(always)]
pub fn gpio_evt_ch5_fall_edge_st(&self) -> GPIO_EVT_CH5_FALL_EDGE_ST_R {
GPIO_EVT_CH5_FALL_EDGE_ST_R::new(((self.bits >> 13) & 1) != 0)
}
#[doc = "Bit 14 - Represents GPIO_evt_ch6_fall_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
#[inline(always)]
pub fn gpio_evt_ch6_fall_edge_st(&self) -> GPIO_EVT_CH6_FALL_EDGE_ST_R {
GPIO_EVT_CH6_FALL_EDGE_ST_R::new(((self.bits >> 14) & 1) != 0)
}
#[doc = "Bit 15 - Represents GPIO_evt_ch7_fall_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
#[inline(always)]
pub fn gpio_evt_ch7_fall_edge_st(&self) -> GPIO_EVT_CH7_FALL_EDGE_ST_R {
GPIO_EVT_CH7_FALL_EDGE_ST_R::new(((self.bits >> 15) & 1) != 0)
}
#[doc = "Bit 16 - Represents GPIO_evt_ch0_any_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
#[inline(always)]
pub fn gpio_evt_ch0_any_edge_st(&self) -> GPIO_EVT_CH0_ANY_EDGE_ST_R {
GPIO_EVT_CH0_ANY_EDGE_ST_R::new(((self.bits >> 16) & 1) != 0)
}
#[doc = "Bit 17 - Represents GPIO_evt_ch1_any_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
#[inline(always)]
pub fn gpio_evt_ch1_any_edge_st(&self) -> GPIO_EVT_CH1_ANY_EDGE_ST_R {
GPIO_EVT_CH1_ANY_EDGE_ST_R::new(((self.bits >> 17) & 1) != 0)
}
#[doc = "Bit 18 - Represents GPIO_evt_ch2_any_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
#[inline(always)]
pub fn gpio_evt_ch2_any_edge_st(&self) -> GPIO_EVT_CH2_ANY_EDGE_ST_R {
GPIO_EVT_CH2_ANY_EDGE_ST_R::new(((self.bits >> 18) & 1) != 0)
}
#[doc = "Bit 19 - Represents GPIO_evt_ch3_any_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
#[inline(always)]
pub fn gpio_evt_ch3_any_edge_st(&self) -> GPIO_EVT_CH3_ANY_EDGE_ST_R {
GPIO_EVT_CH3_ANY_EDGE_ST_R::new(((self.bits >> 19) & 1) != 0)
}
#[doc = "Bit 20 - Represents GPIO_evt_ch4_any_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
#[inline(always)]
pub fn gpio_evt_ch4_any_edge_st(&self) -> GPIO_EVT_CH4_ANY_EDGE_ST_R {
GPIO_EVT_CH4_ANY_EDGE_ST_R::new(((self.bits >> 20) & 1) != 0)
}
#[doc = "Bit 21 - Represents GPIO_evt_ch5_any_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
#[inline(always)]
pub fn gpio_evt_ch5_any_edge_st(&self) -> GPIO_EVT_CH5_ANY_EDGE_ST_R {
GPIO_EVT_CH5_ANY_EDGE_ST_R::new(((self.bits >> 21) & 1) != 0)
}
#[doc = "Bit 22 - Represents GPIO_evt_ch6_any_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
#[inline(always)]
pub fn gpio_evt_ch6_any_edge_st(&self) -> GPIO_EVT_CH6_ANY_EDGE_ST_R {
GPIO_EVT_CH6_ANY_EDGE_ST_R::new(((self.bits >> 22) & 1) != 0)
}
#[doc = "Bit 23 - Represents GPIO_evt_ch7_any_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
#[inline(always)]
pub fn gpio_evt_ch7_any_edge_st(&self) -> GPIO_EVT_CH7_ANY_EDGE_ST_R {
GPIO_EVT_CH7_ANY_EDGE_ST_R::new(((self.bits >> 23) & 1) != 0)
}
#[doc = "Bit 24 - Represents GPIO_evt_zero_det_pos0 trigger status.\\\\0: Not triggered\\\\1: Triggered"]
#[inline(always)]
pub fn gpio_evt_zero_det_pos0_st(&self) -> GPIO_EVT_ZERO_DET_POS0_ST_R {
GPIO_EVT_ZERO_DET_POS0_ST_R::new(((self.bits >> 24) & 1) != 0)
}
#[doc = "Bit 25 - Represents GPIO_evt_zero_det_neg0 trigger status.\\\\0: Not triggered\\\\1: Triggered"]
#[inline(always)]
pub fn gpio_evt_zero_det_neg0_st(&self) -> GPIO_EVT_ZERO_DET_NEG0_ST_R {
GPIO_EVT_ZERO_DET_NEG0_ST_R::new(((self.bits >> 25) & 1) != 0)
}
#[doc = "Bit 26 - Represents LEDC_evt_duty_chng_end_ch0 trigger status.\\\\0: Not triggered\\\\1: Triggered"]
#[inline(always)]
pub fn ledc_evt_duty_chng_end_ch0_st(&self) -> LEDC_EVT_DUTY_CHNG_END_CH0_ST_R {
LEDC_EVT_DUTY_CHNG_END_CH0_ST_R::new(((self.bits >> 26) & 1) != 0)
}
#[doc = "Bit 27 - Represents LEDC_evt_duty_chng_end_ch1 trigger status.\\\\0: Not triggered\\\\1: Triggered"]
#[inline(always)]
pub fn ledc_evt_duty_chng_end_ch1_st(&self) -> LEDC_EVT_DUTY_CHNG_END_CH1_ST_R {
LEDC_EVT_DUTY_CHNG_END_CH1_ST_R::new(((self.bits >> 27) & 1) != 0)
}
#[doc = "Bit 28 - Represents LEDC_evt_duty_chng_end_ch2 trigger status.\\\\0: Not triggered\\\\1: Triggered"]
#[inline(always)]
pub fn ledc_evt_duty_chng_end_ch2_st(&self) -> LEDC_EVT_DUTY_CHNG_END_CH2_ST_R {
LEDC_EVT_DUTY_CHNG_END_CH2_ST_R::new(((self.bits >> 28) & 1) != 0)
}
#[doc = "Bit 29 - Represents LEDC_evt_duty_chng_end_ch3 trigger status.\\\\0: Not triggered\\\\1: Triggered"]
#[inline(always)]
pub fn ledc_evt_duty_chng_end_ch3_st(&self) -> LEDC_EVT_DUTY_CHNG_END_CH3_ST_R {
LEDC_EVT_DUTY_CHNG_END_CH3_ST_R::new(((self.bits >> 29) & 1) != 0)
}
#[doc = "Bit 30 - Represents LEDC_evt_duty_chng_end_ch4 trigger status.\\\\0: Not triggered\\\\1: Triggered"]
#[inline(always)]
pub fn ledc_evt_duty_chng_end_ch4_st(&self) -> LEDC_EVT_DUTY_CHNG_END_CH4_ST_R {
LEDC_EVT_DUTY_CHNG_END_CH4_ST_R::new(((self.bits >> 30) & 1) != 0)
}
#[doc = "Bit 31 - Represents LEDC_evt_duty_chng_end_ch5 trigger status.\\\\0: Not triggered\\\\1: Triggered"]
#[inline(always)]
pub fn ledc_evt_duty_chng_end_ch5_st(&self) -> LEDC_EVT_DUTY_CHNG_END_CH5_ST_R {
LEDC_EVT_DUTY_CHNG_END_CH5_ST_R::new(((self.bits >> 31) & 1) != 0)
}
}
#[cfg(feature = "impl-register-debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
f.debug_struct("EVT_ST0")
.field(
"gpio_evt_ch0_rise_edge_st",
&self.gpio_evt_ch0_rise_edge_st(),
)
.field(
"gpio_evt_ch1_rise_edge_st",
&self.gpio_evt_ch1_rise_edge_st(),
)
.field(
"gpio_evt_ch2_rise_edge_st",
&self.gpio_evt_ch2_rise_edge_st(),
)
.field(
"gpio_evt_ch3_rise_edge_st",
&self.gpio_evt_ch3_rise_edge_st(),
)
.field(
"gpio_evt_ch4_rise_edge_st",
&self.gpio_evt_ch4_rise_edge_st(),
)
.field(
"gpio_evt_ch5_rise_edge_st",
&self.gpio_evt_ch5_rise_edge_st(),
)
.field(
"gpio_evt_ch6_rise_edge_st",
&self.gpio_evt_ch6_rise_edge_st(),
)
.field(
"gpio_evt_ch7_rise_edge_st",
&self.gpio_evt_ch7_rise_edge_st(),
)
.field(
"gpio_evt_ch0_fall_edge_st",
&self.gpio_evt_ch0_fall_edge_st(),
)
.field(
"gpio_evt_ch1_fall_edge_st",
&self.gpio_evt_ch1_fall_edge_st(),
)
.field(
"gpio_evt_ch2_fall_edge_st",
&self.gpio_evt_ch2_fall_edge_st(),
)
.field(
"gpio_evt_ch3_fall_edge_st",
&self.gpio_evt_ch3_fall_edge_st(),
)
.field(
"gpio_evt_ch4_fall_edge_st",
&self.gpio_evt_ch4_fall_edge_st(),
)
.field(
"gpio_evt_ch5_fall_edge_st",
&self.gpio_evt_ch5_fall_edge_st(),
)
.field(
"gpio_evt_ch6_fall_edge_st",
&self.gpio_evt_ch6_fall_edge_st(),
)
.field(
"gpio_evt_ch7_fall_edge_st",
&self.gpio_evt_ch7_fall_edge_st(),
)
.field("gpio_evt_ch0_any_edge_st", &self.gpio_evt_ch0_any_edge_st())
.field("gpio_evt_ch1_any_edge_st", &self.gpio_evt_ch1_any_edge_st())
.field("gpio_evt_ch2_any_edge_st", &self.gpio_evt_ch2_any_edge_st())
.field("gpio_evt_ch3_any_edge_st", &self.gpio_evt_ch3_any_edge_st())
.field("gpio_evt_ch4_any_edge_st", &self.gpio_evt_ch4_any_edge_st())
.field("gpio_evt_ch5_any_edge_st", &self.gpio_evt_ch5_any_edge_st())
.field("gpio_evt_ch6_any_edge_st", &self.gpio_evt_ch6_any_edge_st())
.field("gpio_evt_ch7_any_edge_st", &self.gpio_evt_ch7_any_edge_st())
.field(
"gpio_evt_zero_det_pos0_st",
&self.gpio_evt_zero_det_pos0_st(),
)
.field(
"gpio_evt_zero_det_neg0_st",
&self.gpio_evt_zero_det_neg0_st(),
)
.field(
"ledc_evt_duty_chng_end_ch0_st",
&self.ledc_evt_duty_chng_end_ch0_st(),
)
.field(
"ledc_evt_duty_chng_end_ch1_st",
&self.ledc_evt_duty_chng_end_ch1_st(),
)
.field(
"ledc_evt_duty_chng_end_ch2_st",
&self.ledc_evt_duty_chng_end_ch2_st(),
)
.field(
"ledc_evt_duty_chng_end_ch3_st",
&self.ledc_evt_duty_chng_end_ch3_st(),
)
.field(
"ledc_evt_duty_chng_end_ch4_st",
&self.ledc_evt_duty_chng_end_ch4_st(),
)
.field(
"ledc_evt_duty_chng_end_ch5_st",
&self.ledc_evt_duty_chng_end_ch5_st(),
)
.finish()
}
}
impl W {
#[doc = "Bit 0 - Represents GPIO_evt_ch0_rise_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
#[inline(always)]
pub fn gpio_evt_ch0_rise_edge_st(&mut self) -> GPIO_EVT_CH0_RISE_EDGE_ST_W<'_, EVT_ST0_SPEC> {
GPIO_EVT_CH0_RISE_EDGE_ST_W::new(self, 0)
}
#[doc = "Bit 1 - Represents GPIO_evt_ch1_rise_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
#[inline(always)]
pub fn gpio_evt_ch1_rise_edge_st(&mut self) -> GPIO_EVT_CH1_RISE_EDGE_ST_W<'_, EVT_ST0_SPEC> {
GPIO_EVT_CH1_RISE_EDGE_ST_W::new(self, 1)
}
#[doc = "Bit 2 - Represents GPIO_evt_ch2_rise_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
#[inline(always)]
pub fn gpio_evt_ch2_rise_edge_st(&mut self) -> GPIO_EVT_CH2_RISE_EDGE_ST_W<'_, EVT_ST0_SPEC> {
GPIO_EVT_CH2_RISE_EDGE_ST_W::new(self, 2)
}
#[doc = "Bit 3 - Represents GPIO_evt_ch3_rise_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
#[inline(always)]
pub fn gpio_evt_ch3_rise_edge_st(&mut self) -> GPIO_EVT_CH3_RISE_EDGE_ST_W<'_, EVT_ST0_SPEC> {
GPIO_EVT_CH3_RISE_EDGE_ST_W::new(self, 3)
}
#[doc = "Bit 4 - Represents GPIO_evt_ch4_rise_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
#[inline(always)]
pub fn gpio_evt_ch4_rise_edge_st(&mut self) -> GPIO_EVT_CH4_RISE_EDGE_ST_W<'_, EVT_ST0_SPEC> {
GPIO_EVT_CH4_RISE_EDGE_ST_W::new(self, 4)
}
#[doc = "Bit 5 - Represents GPIO_evt_ch5_rise_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
#[inline(always)]
pub fn gpio_evt_ch5_rise_edge_st(&mut self) -> GPIO_EVT_CH5_RISE_EDGE_ST_W<'_, EVT_ST0_SPEC> {
GPIO_EVT_CH5_RISE_EDGE_ST_W::new(self, 5)
}
#[doc = "Bit 6 - Represents GPIO_evt_ch6_rise_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
#[inline(always)]
pub fn gpio_evt_ch6_rise_edge_st(&mut self) -> GPIO_EVT_CH6_RISE_EDGE_ST_W<'_, EVT_ST0_SPEC> {
GPIO_EVT_CH6_RISE_EDGE_ST_W::new(self, 6)
}
#[doc = "Bit 7 - Represents GPIO_evt_ch7_rise_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
#[inline(always)]
pub fn gpio_evt_ch7_rise_edge_st(&mut self) -> GPIO_EVT_CH7_RISE_EDGE_ST_W<'_, EVT_ST0_SPEC> {
GPIO_EVT_CH7_RISE_EDGE_ST_W::new(self, 7)
}
#[doc = "Bit 8 - Represents GPIO_evt_ch0_fall_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
#[inline(always)]
pub fn gpio_evt_ch0_fall_edge_st(&mut self) -> GPIO_EVT_CH0_FALL_EDGE_ST_W<'_, EVT_ST0_SPEC> {
GPIO_EVT_CH0_FALL_EDGE_ST_W::new(self, 8)
}
#[doc = "Bit 9 - Represents GPIO_evt_ch1_fall_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
#[inline(always)]
pub fn gpio_evt_ch1_fall_edge_st(&mut self) -> GPIO_EVT_CH1_FALL_EDGE_ST_W<'_, EVT_ST0_SPEC> {
GPIO_EVT_CH1_FALL_EDGE_ST_W::new(self, 9)
}
#[doc = "Bit 10 - Represents GPIO_evt_ch2_fall_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
#[inline(always)]
pub fn gpio_evt_ch2_fall_edge_st(&mut self) -> GPIO_EVT_CH2_FALL_EDGE_ST_W<'_, EVT_ST0_SPEC> {
GPIO_EVT_CH2_FALL_EDGE_ST_W::new(self, 10)
}
#[doc = "Bit 11 - Represents GPIO_evt_ch3_fall_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
#[inline(always)]
pub fn gpio_evt_ch3_fall_edge_st(&mut self) -> GPIO_EVT_CH3_FALL_EDGE_ST_W<'_, EVT_ST0_SPEC> {
GPIO_EVT_CH3_FALL_EDGE_ST_W::new(self, 11)
}
#[doc = "Bit 12 - Represents GPIO_evt_ch4_fall_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
#[inline(always)]
pub fn gpio_evt_ch4_fall_edge_st(&mut self) -> GPIO_EVT_CH4_FALL_EDGE_ST_W<'_, EVT_ST0_SPEC> {
GPIO_EVT_CH4_FALL_EDGE_ST_W::new(self, 12)
}
#[doc = "Bit 13 - Represents GPIO_evt_ch5_fall_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
#[inline(always)]
pub fn gpio_evt_ch5_fall_edge_st(&mut self) -> GPIO_EVT_CH5_FALL_EDGE_ST_W<'_, EVT_ST0_SPEC> {
GPIO_EVT_CH5_FALL_EDGE_ST_W::new(self, 13)
}
#[doc = "Bit 14 - Represents GPIO_evt_ch6_fall_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
#[inline(always)]
pub fn gpio_evt_ch6_fall_edge_st(&mut self) -> GPIO_EVT_CH6_FALL_EDGE_ST_W<'_, EVT_ST0_SPEC> {
GPIO_EVT_CH6_FALL_EDGE_ST_W::new(self, 14)
}
#[doc = "Bit 15 - Represents GPIO_evt_ch7_fall_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
#[inline(always)]
pub fn gpio_evt_ch7_fall_edge_st(&mut self) -> GPIO_EVT_CH7_FALL_EDGE_ST_W<'_, EVT_ST0_SPEC> {
GPIO_EVT_CH7_FALL_EDGE_ST_W::new(self, 15)
}
#[doc = "Bit 16 - Represents GPIO_evt_ch0_any_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
#[inline(always)]
pub fn gpio_evt_ch0_any_edge_st(&mut self) -> GPIO_EVT_CH0_ANY_EDGE_ST_W<'_, EVT_ST0_SPEC> {
GPIO_EVT_CH0_ANY_EDGE_ST_W::new(self, 16)
}
#[doc = "Bit 17 - Represents GPIO_evt_ch1_any_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
#[inline(always)]
pub fn gpio_evt_ch1_any_edge_st(&mut self) -> GPIO_EVT_CH1_ANY_EDGE_ST_W<'_, EVT_ST0_SPEC> {
GPIO_EVT_CH1_ANY_EDGE_ST_W::new(self, 17)
}
#[doc = "Bit 18 - Represents GPIO_evt_ch2_any_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
#[inline(always)]
pub fn gpio_evt_ch2_any_edge_st(&mut self) -> GPIO_EVT_CH2_ANY_EDGE_ST_W<'_, EVT_ST0_SPEC> {
GPIO_EVT_CH2_ANY_EDGE_ST_W::new(self, 18)
}
#[doc = "Bit 19 - Represents GPIO_evt_ch3_any_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
#[inline(always)]
pub fn gpio_evt_ch3_any_edge_st(&mut self) -> GPIO_EVT_CH3_ANY_EDGE_ST_W<'_, EVT_ST0_SPEC> {
GPIO_EVT_CH3_ANY_EDGE_ST_W::new(self, 19)
}
#[doc = "Bit 20 - Represents GPIO_evt_ch4_any_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
#[inline(always)]
pub fn gpio_evt_ch4_any_edge_st(&mut self) -> GPIO_EVT_CH4_ANY_EDGE_ST_W<'_, EVT_ST0_SPEC> {
GPIO_EVT_CH4_ANY_EDGE_ST_W::new(self, 20)
}
#[doc = "Bit 21 - Represents GPIO_evt_ch5_any_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
#[inline(always)]
pub fn gpio_evt_ch5_any_edge_st(&mut self) -> GPIO_EVT_CH5_ANY_EDGE_ST_W<'_, EVT_ST0_SPEC> {
GPIO_EVT_CH5_ANY_EDGE_ST_W::new(self, 21)
}
#[doc = "Bit 22 - Represents GPIO_evt_ch6_any_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
#[inline(always)]
pub fn gpio_evt_ch6_any_edge_st(&mut self) -> GPIO_EVT_CH6_ANY_EDGE_ST_W<'_, EVT_ST0_SPEC> {
GPIO_EVT_CH6_ANY_EDGE_ST_W::new(self, 22)
}
#[doc = "Bit 23 - Represents GPIO_evt_ch7_any_edge trigger status.\\\\0: Not triggered\\\\1: Triggered"]
#[inline(always)]
pub fn gpio_evt_ch7_any_edge_st(&mut self) -> GPIO_EVT_CH7_ANY_EDGE_ST_W<'_, EVT_ST0_SPEC> {
GPIO_EVT_CH7_ANY_EDGE_ST_W::new(self, 23)
}
#[doc = "Bit 24 - Represents GPIO_evt_zero_det_pos0 trigger status.\\\\0: Not triggered\\\\1: Triggered"]
#[inline(always)]
pub fn gpio_evt_zero_det_pos0_st(&mut self) -> GPIO_EVT_ZERO_DET_POS0_ST_W<'_, EVT_ST0_SPEC> {
GPIO_EVT_ZERO_DET_POS0_ST_W::new(self, 24)
}
#[doc = "Bit 25 - Represents GPIO_evt_zero_det_neg0 trigger status.\\\\0: Not triggered\\\\1: Triggered"]
#[inline(always)]
pub fn gpio_evt_zero_det_neg0_st(&mut self) -> GPIO_EVT_ZERO_DET_NEG0_ST_W<'_, EVT_ST0_SPEC> {
GPIO_EVT_ZERO_DET_NEG0_ST_W::new(self, 25)
}
#[doc = "Bit 26 - Represents LEDC_evt_duty_chng_end_ch0 trigger status.\\\\0: Not triggered\\\\1: Triggered"]
#[inline(always)]
pub fn ledc_evt_duty_chng_end_ch0_st(
&mut self,
) -> LEDC_EVT_DUTY_CHNG_END_CH0_ST_W<'_, EVT_ST0_SPEC> {
LEDC_EVT_DUTY_CHNG_END_CH0_ST_W::new(self, 26)
}
#[doc = "Bit 27 - Represents LEDC_evt_duty_chng_end_ch1 trigger status.\\\\0: Not triggered\\\\1: Triggered"]
#[inline(always)]
pub fn ledc_evt_duty_chng_end_ch1_st(
&mut self,
) -> LEDC_EVT_DUTY_CHNG_END_CH1_ST_W<'_, EVT_ST0_SPEC> {
LEDC_EVT_DUTY_CHNG_END_CH1_ST_W::new(self, 27)
}
#[doc = "Bit 28 - Represents LEDC_evt_duty_chng_end_ch2 trigger status.\\\\0: Not triggered\\\\1: Triggered"]
#[inline(always)]
pub fn ledc_evt_duty_chng_end_ch2_st(
&mut self,
) -> LEDC_EVT_DUTY_CHNG_END_CH2_ST_W<'_, EVT_ST0_SPEC> {
LEDC_EVT_DUTY_CHNG_END_CH2_ST_W::new(self, 28)
}
#[doc = "Bit 29 - Represents LEDC_evt_duty_chng_end_ch3 trigger status.\\\\0: Not triggered\\\\1: Triggered"]
#[inline(always)]
pub fn ledc_evt_duty_chng_end_ch3_st(
&mut self,
) -> LEDC_EVT_DUTY_CHNG_END_CH3_ST_W<'_, EVT_ST0_SPEC> {
LEDC_EVT_DUTY_CHNG_END_CH3_ST_W::new(self, 29)
}
#[doc = "Bit 30 - Represents LEDC_evt_duty_chng_end_ch4 trigger status.\\\\0: Not triggered\\\\1: Triggered"]
#[inline(always)]
pub fn ledc_evt_duty_chng_end_ch4_st(
&mut self,
) -> LEDC_EVT_DUTY_CHNG_END_CH4_ST_W<'_, EVT_ST0_SPEC> {
LEDC_EVT_DUTY_CHNG_END_CH4_ST_W::new(self, 30)
}
#[doc = "Bit 31 - Represents LEDC_evt_duty_chng_end_ch5 trigger status.\\\\0: Not triggered\\\\1: Triggered"]
#[inline(always)]
pub fn ledc_evt_duty_chng_end_ch5_st(
&mut self,
) -> LEDC_EVT_DUTY_CHNG_END_CH5_ST_W<'_, EVT_ST0_SPEC> {
LEDC_EVT_DUTY_CHNG_END_CH5_ST_W::new(self, 31)
}
}
#[doc = "Events trigger status register\n\nYou can [`read`](crate::Reg::read) this register and get [`evt_st0::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`evt_st0::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
pub struct EVT_ST0_SPEC;
impl crate::RegisterSpec for EVT_ST0_SPEC {
type Ux = u32;
}
#[doc = "`read()` method returns [`evt_st0::R`](R) reader structure"]
impl crate::Readable for EVT_ST0_SPEC {}
#[doc = "`write(|w| ..)` method takes [`evt_st0::W`](W) writer structure"]
impl crate::Writable for EVT_ST0_SPEC {
type Safety = crate::Unsafe;
}
#[doc = "`reset()` method sets EVT_ST0 to value 0"]
impl crate::Resettable for EVT_ST0_SPEC {}