esp32c3 0.32.2

Peripheral access crate for the ESP32-C3
Documentation 
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148

#[doc = "Register `SUS_STATUS` reader"]
pub type R = crate::R<SUS_STATUS_SPEC>;
#[doc = "Register `SUS_STATUS` writer"]
pub type W = crate::W<SUS_STATUS_SPEC>;
#[doc = "Field `FLASH_SUS` reader - The status of flash suspend, only used in SPI1."]
pub type FLASH_SUS_R = crate::BitReader;
#[doc = "Field `FLASH_SUS` writer - The status of flash suspend, only used in SPI1."]
pub type FLASH_SUS_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `WAIT_PESR_CMD_2B` reader - 1: SPI1 sends out SPI_MEM_WAIT_PESR_COMMAND\\[15:0\\] to check SUS/SUS1/SUS2 bit. 0: SPI1 sends out SPI_MEM_WAIT_PESR_COMMAND\\[7:0\\] to check SUS/SUS1/SUS2 bit."]
pub type WAIT_PESR_CMD_2B_R = crate::BitReader;
#[doc = "Field `WAIT_PESR_CMD_2B` writer - 1: SPI1 sends out SPI_MEM_WAIT_PESR_COMMAND\\[15:0\\] to check SUS/SUS1/SUS2 bit. 0: SPI1 sends out SPI_MEM_WAIT_PESR_COMMAND\\[7:0\\] to check SUS/SUS1/SUS2 bit."]
pub type WAIT_PESR_CMD_2B_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `FLASH_HPM_DLY_128` reader - 1: SPI1 waits (SPI_MEM_CS_HOLD_DELAY_RES\\[9:0\\] * 128) SPI_CLK cycles after HPM command is sent. 0: SPI1 waits (SPI_MEM_CS_HOLD_DELAY_RES\\[9:0\\] * 4) SPI_CLK cycles after HPM command is sent."]
pub type FLASH_HPM_DLY_128_R = crate::BitReader;
#[doc = "Field `FLASH_HPM_DLY_128` writer - 1: SPI1 waits (SPI_MEM_CS_HOLD_DELAY_RES\\[9:0\\] * 128) SPI_CLK cycles after HPM command is sent. 0: SPI1 waits (SPI_MEM_CS_HOLD_DELAY_RES\\[9:0\\] * 4) SPI_CLK cycles after HPM command is sent."]
pub type FLASH_HPM_DLY_128_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `FLASH_RES_DLY_128` reader - 1: SPI1 waits (SPI_MEM_CS_HOLD_DELAY_RES\\[9:0\\] * 128) SPI_CLK cycles after RES command is sent. 0: SPI1 waits (SPI_MEM_CS_HOLD_DELAY_RES\\[9:0\\] * 4) SPI_CLK cycles after RES command is sent."]
pub type FLASH_RES_DLY_128_R = crate::BitReader;
#[doc = "Field `FLASH_RES_DLY_128` writer - 1: SPI1 waits (SPI_MEM_CS_HOLD_DELAY_RES\\[9:0\\] * 128) SPI_CLK cycles after RES command is sent. 0: SPI1 waits (SPI_MEM_CS_HOLD_DELAY_RES\\[9:0\\] * 4) SPI_CLK cycles after RES command is sent."]
pub type FLASH_RES_DLY_128_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `FLASH_DP_DLY_128` reader - 1: SPI1 waits (SPI_MEM_CS_HOLD_DELAY_RES\\[9:0\\] * 128) SPI_CLK cycles after DP command is sent. 0: SPI1 waits (SPI_MEM_CS_HOLD_DELAY_RES\\[9:0\\] * 4) SPI_CLK cycles after DP command is sent."]
pub type FLASH_DP_DLY_128_R = crate::BitReader;
#[doc = "Field `FLASH_DP_DLY_128` writer - 1: SPI1 waits (SPI_MEM_CS_HOLD_DELAY_RES\\[9:0\\] * 128) SPI_CLK cycles after DP command is sent. 0: SPI1 waits (SPI_MEM_CS_HOLD_DELAY_RES\\[9:0\\] * 4) SPI_CLK cycles after DP command is sent."]
pub type FLASH_DP_DLY_128_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `FLASH_PER_DLY_128` reader - Valid when SPI_MEM_FLASH_PER_WAIT_EN is 1. 1: SPI1 waits (SPI_MEM_CS_HOLD_DELAY_RES\\[9:0\\] * 128) SPI_CLK cycles after PER command is sent. 0: SPI1 waits (SPI_MEM_CS_HOLD_DELAY_RES\\[9:0\\] * 4) SPI_CLK cycles after PER command is sent."]
pub type FLASH_PER_DLY_128_R = crate::BitReader;
#[doc = "Field `FLASH_PER_DLY_128` writer - Valid when SPI_MEM_FLASH_PER_WAIT_EN is 1. 1: SPI1 waits (SPI_MEM_CS_HOLD_DELAY_RES\\[9:0\\] * 128) SPI_CLK cycles after PER command is sent. 0: SPI1 waits (SPI_MEM_CS_HOLD_DELAY_RES\\[9:0\\] * 4) SPI_CLK cycles after PER command is sent."]
pub type FLASH_PER_DLY_128_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `FLASH_PES_DLY_128` reader - Valid when SPI_MEM_FLASH_PES_WAIT_EN is 1. 1: SPI1 waits (SPI_MEM_CS_HOLD_DELAY_RES\\[9:0\\] * 128) SPI_CLK cycles after PES command is sent. 0: SPI1 waits (SPI_MEM_CS_HOLD_DELAY_RES\\[9:0\\] * 4) SPI_CLK cycles after PES command is sent."]
pub type FLASH_PES_DLY_128_R = crate::BitReader;
#[doc = "Field `FLASH_PES_DLY_128` writer - Valid when SPI_MEM_FLASH_PES_WAIT_EN is 1. 1: SPI1 waits (SPI_MEM_CS_HOLD_DELAY_RES\\[9:0\\] * 128) SPI_CLK cycles after PES command is sent. 0: SPI1 waits (SPI_MEM_CS_HOLD_DELAY_RES\\[9:0\\] * 4) SPI_CLK cycles after PES command is sent."]
pub type FLASH_PES_DLY_128_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `SPI0_LOCK_EN` reader - 1: Enable SPI0 lock SPI0/1 arbiter option. 0: Disable it."]
pub type SPI0_LOCK_EN_R = crate::BitReader;
#[doc = "Field `SPI0_LOCK_EN` writer - 1: Enable SPI0 lock SPI0/1 arbiter option. 0: Disable it."]
pub type SPI0_LOCK_EN_W<'a, REG> = crate::BitWriter<'a, REG>;
impl R {
    #[doc = "Bit 0 - The status of flash suspend, only used in SPI1."]
    #[inline(always)]
    pub fn flash_sus(&self) -> FLASH_SUS_R {
        FLASH_SUS_R::new((self.bits & 1) != 0)
    }
    #[doc = "Bit 1 - 1: SPI1 sends out SPI_MEM_WAIT_PESR_COMMAND\\[15:0\\] to check SUS/SUS1/SUS2 bit. 0: SPI1 sends out SPI_MEM_WAIT_PESR_COMMAND\\[7:0\\] to check SUS/SUS1/SUS2 bit."]
    #[inline(always)]
    pub fn wait_pesr_cmd_2b(&self) -> WAIT_PESR_CMD_2B_R {
        WAIT_PESR_CMD_2B_R::new(((self.bits >> 1) & 1) != 0)
    }
    #[doc = "Bit 2 - 1: SPI1 waits (SPI_MEM_CS_HOLD_DELAY_RES\\[9:0\\] * 128) SPI_CLK cycles after HPM command is sent. 0: SPI1 waits (SPI_MEM_CS_HOLD_DELAY_RES\\[9:0\\] * 4) SPI_CLK cycles after HPM command is sent."]
    #[inline(always)]
    pub fn flash_hpm_dly_128(&self) -> FLASH_HPM_DLY_128_R {
        FLASH_HPM_DLY_128_R::new(((self.bits >> 2) & 1) != 0)
    }
    #[doc = "Bit 3 - 1: SPI1 waits (SPI_MEM_CS_HOLD_DELAY_RES\\[9:0\\] * 128) SPI_CLK cycles after RES command is sent. 0: SPI1 waits (SPI_MEM_CS_HOLD_DELAY_RES\\[9:0\\] * 4) SPI_CLK cycles after RES command is sent."]
    #[inline(always)]
    pub fn flash_res_dly_128(&self) -> FLASH_RES_DLY_128_R {
        FLASH_RES_DLY_128_R::new(((self.bits >> 3) & 1) != 0)
    }
    #[doc = "Bit 4 - 1: SPI1 waits (SPI_MEM_CS_HOLD_DELAY_RES\\[9:0\\] * 128) SPI_CLK cycles after DP command is sent. 0: SPI1 waits (SPI_MEM_CS_HOLD_DELAY_RES\\[9:0\\] * 4) SPI_CLK cycles after DP command is sent."]
    #[inline(always)]
    pub fn flash_dp_dly_128(&self) -> FLASH_DP_DLY_128_R {
        FLASH_DP_DLY_128_R::new(((self.bits >> 4) & 1) != 0)
    }
    #[doc = "Bit 5 - Valid when SPI_MEM_FLASH_PER_WAIT_EN is 1. 1: SPI1 waits (SPI_MEM_CS_HOLD_DELAY_RES\\[9:0\\] * 128) SPI_CLK cycles after PER command is sent. 0: SPI1 waits (SPI_MEM_CS_HOLD_DELAY_RES\\[9:0\\] * 4) SPI_CLK cycles after PER command is sent."]
    #[inline(always)]
    pub fn flash_per_dly_128(&self) -> FLASH_PER_DLY_128_R {
        FLASH_PER_DLY_128_R::new(((self.bits >> 5) & 1) != 0)
    }
    #[doc = "Bit 6 - Valid when SPI_MEM_FLASH_PES_WAIT_EN is 1. 1: SPI1 waits (SPI_MEM_CS_HOLD_DELAY_RES\\[9:0\\] * 128) SPI_CLK cycles after PES command is sent. 0: SPI1 waits (SPI_MEM_CS_HOLD_DELAY_RES\\[9:0\\] * 4) SPI_CLK cycles after PES command is sent."]
    #[inline(always)]
    pub fn flash_pes_dly_128(&self) -> FLASH_PES_DLY_128_R {
        FLASH_PES_DLY_128_R::new(((self.bits >> 6) & 1) != 0)
    }
    #[doc = "Bit 7 - 1: Enable SPI0 lock SPI0/1 arbiter option. 0: Disable it."]
    #[inline(always)]
    pub fn spi0_lock_en(&self) -> SPI0_LOCK_EN_R {
        SPI0_LOCK_EN_R::new(((self.bits >> 7) & 1) != 0)
    }
}
#[cfg(feature = "impl-register-debug")]
impl core::fmt::Debug for R {
    fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
        f.debug_struct("SUS_STATUS")
            .field("flash_sus", &self.flash_sus())
            .field("wait_pesr_cmd_2b", &self.wait_pesr_cmd_2b())
            .field("flash_hpm_dly_128", &self.flash_hpm_dly_128())
            .field("flash_res_dly_128", &self.flash_res_dly_128())
            .field("flash_dp_dly_128", &self.flash_dp_dly_128())
            .field("flash_per_dly_128", &self.flash_per_dly_128())
            .field("flash_pes_dly_128", &self.flash_pes_dly_128())
            .field("spi0_lock_en", &self.spi0_lock_en())
            .finish()
    }
}
impl W {
    #[doc = "Bit 0 - The status of flash suspend, only used in SPI1."]
    #[inline(always)]
    pub fn flash_sus(&mut self) -> FLASH_SUS_W<'_, SUS_STATUS_SPEC> {
        FLASH_SUS_W::new(self, 0)
    }
    #[doc = "Bit 1 - 1: SPI1 sends out SPI_MEM_WAIT_PESR_COMMAND\\[15:0\\] to check SUS/SUS1/SUS2 bit. 0: SPI1 sends out SPI_MEM_WAIT_PESR_COMMAND\\[7:0\\] to check SUS/SUS1/SUS2 bit."]
    #[inline(always)]
    pub fn wait_pesr_cmd_2b(&mut self) -> WAIT_PESR_CMD_2B_W<'_, SUS_STATUS_SPEC> {
        WAIT_PESR_CMD_2B_W::new(self, 1)
    }
    #[doc = "Bit 2 - 1: SPI1 waits (SPI_MEM_CS_HOLD_DELAY_RES\\[9:0\\] * 128) SPI_CLK cycles after HPM command is sent. 0: SPI1 waits (SPI_MEM_CS_HOLD_DELAY_RES\\[9:0\\] * 4) SPI_CLK cycles after HPM command is sent."]
    #[inline(always)]
    pub fn flash_hpm_dly_128(&mut self) -> FLASH_HPM_DLY_128_W<'_, SUS_STATUS_SPEC> {
        FLASH_HPM_DLY_128_W::new(self, 2)
    }
    #[doc = "Bit 3 - 1: SPI1 waits (SPI_MEM_CS_HOLD_DELAY_RES\\[9:0\\] * 128) SPI_CLK cycles after RES command is sent. 0: SPI1 waits (SPI_MEM_CS_HOLD_DELAY_RES\\[9:0\\] * 4) SPI_CLK cycles after RES command is sent."]
    #[inline(always)]
    pub fn flash_res_dly_128(&mut self) -> FLASH_RES_DLY_128_W<'_, SUS_STATUS_SPEC> {
        FLASH_RES_DLY_128_W::new(self, 3)
    }
    #[doc = "Bit 4 - 1: SPI1 waits (SPI_MEM_CS_HOLD_DELAY_RES\\[9:0\\] * 128) SPI_CLK cycles after DP command is sent. 0: SPI1 waits (SPI_MEM_CS_HOLD_DELAY_RES\\[9:0\\] * 4) SPI_CLK cycles after DP command is sent."]
    #[inline(always)]
    pub fn flash_dp_dly_128(&mut self) -> FLASH_DP_DLY_128_W<'_, SUS_STATUS_SPEC> {
        FLASH_DP_DLY_128_W::new(self, 4)
    }
    #[doc = "Bit 5 - Valid when SPI_MEM_FLASH_PER_WAIT_EN is 1. 1: SPI1 waits (SPI_MEM_CS_HOLD_DELAY_RES\\[9:0\\] * 128) SPI_CLK cycles after PER command is sent. 0: SPI1 waits (SPI_MEM_CS_HOLD_DELAY_RES\\[9:0\\] * 4) SPI_CLK cycles after PER command is sent."]
    #[inline(always)]
    pub fn flash_per_dly_128(&mut self) -> FLASH_PER_DLY_128_W<'_, SUS_STATUS_SPEC> {
        FLASH_PER_DLY_128_W::new(self, 5)
    }
    #[doc = "Bit 6 - Valid when SPI_MEM_FLASH_PES_WAIT_EN is 1. 1: SPI1 waits (SPI_MEM_CS_HOLD_DELAY_RES\\[9:0\\] * 128) SPI_CLK cycles after PES command is sent. 0: SPI1 waits (SPI_MEM_CS_HOLD_DELAY_RES\\[9:0\\] * 4) SPI_CLK cycles after PES command is sent."]
    #[inline(always)]
    pub fn flash_pes_dly_128(&mut self) -> FLASH_PES_DLY_128_W<'_, SUS_STATUS_SPEC> {
        FLASH_PES_DLY_128_W::new(self, 6)
    }
    #[doc = "Bit 7 - 1: Enable SPI0 lock SPI0/1 arbiter option. 0: Disable it."]
    #[inline(always)]
    pub fn spi0_lock_en(&mut self) -> SPI0_LOCK_EN_W<'_, SUS_STATUS_SPEC> {
        SPI0_LOCK_EN_W::new(self, 7)
    }
}
#[doc = "SPI1 flash suspend status register\n\nYou can [`read`](crate::Reg::read) this register and get [`sus_status::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`sus_status::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
pub struct SUS_STATUS_SPEC;
impl crate::RegisterSpec for SUS_STATUS_SPEC {
    type Ux = u32;
}
#[doc = "`read()` method returns [`sus_status::R`](R) reader structure"]
impl crate::Readable for SUS_STATUS_SPEC {}
#[doc = "`write(|w| ..)` method takes [`sus_status::W`](W) writer structure"]
impl crate::Writable for SUS_STATUS_SPEC {
    type Safety = crate::Unsafe;
}
#[doc = "`reset()` method sets SUS_STATUS to value 0"]
impl crate::Resettable for SUS_STATUS_SPEC {}