#[doc = r"Register block"]
#[repr(C)]
pub struct RegisterBlock {
#[doc = "0x00 - Command control register"]
pub cmd: CMD,
#[doc = "0x04 - Address value register"]
pub addr: ADDR,
#[doc = "0x08 - SPI control register"]
pub ctrl: CTRL,
#[doc = "0x0c - SPI clock control register"]
pub clock: CLOCK,
#[doc = "0x10 - SPI USER control register"]
pub user: USER,
#[doc = "0x14 - SPI USER control register 1"]
pub user1: USER1,
#[doc = "0x18 - SPI USER control register 2"]
pub user2: USER2,
#[doc = "0x1c - SPI data bit length control register"]
pub ms_dlen: MS_DLEN,
#[doc = "0x20 - SPI misc register"]
pub misc: MISC,
#[doc = "0x24 - SPI input delay mode configuration"]
pub din_mode: DIN_MODE,
#[doc = "0x28 - SPI input delay number configuration"]
pub din_num: DIN_NUM,
#[doc = "0x2c - SPI output delay mode configuration"]
pub dout_mode: DOUT_MODE,
#[doc = "0x30 - SPI DMA control register"]
pub dma_conf: DMA_CONF,
#[doc = "0x34 - SPI DMA interrupt enable register"]
pub dma_int_ena: DMA_INT_ENA,
#[doc = "0x38 - SPI DMA interrupt clear register"]
pub dma_int_clr: DMA_INT_CLR,
#[doc = "0x3c - SPI DMA interrupt raw register"]
pub dma_int_raw: DMA_INT_RAW,
#[doc = "0x40 - SPI DMA interrupt status register"]
pub dma_int_st: DMA_INT_ST,
_reserved17: [u8; 0x54],
#[doc = "0x98 - SPI CPU-controlled buffer0"]
pub w0: W0,
#[doc = "0x9c - SPI CPU-controlled buffer1"]
pub w1: W1,
#[doc = "0xa0 - SPI CPU-controlled buffer2"]
pub w2: W2,
#[doc = "0xa4 - SPI CPU-controlled buffer3"]
pub w3: W3,
#[doc = "0xa8 - SPI CPU-controlled buffer4"]
pub w4: W4,
#[doc = "0xac - SPI CPU-controlled buffer5"]
pub w5: W5,
#[doc = "0xb0 - SPI CPU-controlled buffer6"]
pub w6: W6,
#[doc = "0xb4 - SPI CPU-controlled buffer7"]
pub w7: W7,
#[doc = "0xb8 - SPI CPU-controlled buffer8"]
pub w8: W8,
#[doc = "0xbc - SPI CPU-controlled buffer9"]
pub w9: W9,
#[doc = "0xc0 - SPI CPU-controlled buffer10"]
pub w10: W10,
#[doc = "0xc4 - SPI CPU-controlled buffer11"]
pub w11: W11,
#[doc = "0xc8 - SPI CPU-controlled buffer12"]
pub w12: W12,
#[doc = "0xcc - SPI CPU-controlled buffer13"]
pub w13: W13,
#[doc = "0xd0 - SPI CPU-controlled buffer14"]
pub w14: W14,
#[doc = "0xd4 - SPI CPU-controlled buffer15"]
pub w15: W15,
_reserved33: [u8; 0x08],
#[doc = "0xe0 - SPI slave control register"]
pub slave: SLAVE,
#[doc = "0xe4 - SPI slave control register 1"]
pub slave1: SLAVE1,
#[doc = "0xe8 - SPI module clock and register clock control"]
pub clk_gate: CLK_GATE,
_reserved36: [u8; 0x04],
#[doc = "0xf0 - Version control"]
pub date: DATE,
}
#[doc = "CMD (rw) register accessor: an alias for `Reg<CMD_SPEC>`"]
pub type CMD = crate::Reg<cmd::CMD_SPEC>;
#[doc = "Command control register"]
pub mod cmd;
#[doc = "ADDR (rw) register accessor: an alias for `Reg<ADDR_SPEC>`"]
pub type ADDR = crate::Reg<addr::ADDR_SPEC>;
#[doc = "Address value register"]
pub mod addr;
#[doc = "CTRL (rw) register accessor: an alias for `Reg<CTRL_SPEC>`"]
pub type CTRL = crate::Reg<ctrl::CTRL_SPEC>;
#[doc = "SPI control register"]
pub mod ctrl;
#[doc = "CLOCK (rw) register accessor: an alias for `Reg<CLOCK_SPEC>`"]
pub type CLOCK = crate::Reg<clock::CLOCK_SPEC>;
#[doc = "SPI clock control register"]
pub mod clock;
#[doc = "USER (rw) register accessor: an alias for `Reg<USER_SPEC>`"]
pub type USER = crate::Reg<user::USER_SPEC>;
#[doc = "SPI USER control register"]
pub mod user;
#[doc = "USER1 (rw) register accessor: an alias for `Reg<USER1_SPEC>`"]
pub type USER1 = crate::Reg<user1::USER1_SPEC>;
#[doc = "SPI USER control register 1"]
pub mod user1;
#[doc = "USER2 (rw) register accessor: an alias for `Reg<USER2_SPEC>`"]
pub type USER2 = crate::Reg<user2::USER2_SPEC>;
#[doc = "SPI USER control register 2"]
pub mod user2;
#[doc = "MS_DLEN (rw) register accessor: an alias for `Reg<MS_DLEN_SPEC>`"]
pub type MS_DLEN = crate::Reg<ms_dlen::MS_DLEN_SPEC>;
#[doc = "SPI data bit length control register"]
pub mod ms_dlen;
#[doc = "MISC (rw) register accessor: an alias for `Reg<MISC_SPEC>`"]
pub type MISC = crate::Reg<misc::MISC_SPEC>;
#[doc = "SPI misc register"]
pub mod misc;
#[doc = "DIN_MODE (rw) register accessor: an alias for `Reg<DIN_MODE_SPEC>`"]
pub type DIN_MODE = crate::Reg<din_mode::DIN_MODE_SPEC>;
#[doc = "SPI input delay mode configuration"]
pub mod din_mode;
#[doc = "DIN_NUM (rw) register accessor: an alias for `Reg<DIN_NUM_SPEC>`"]
pub type DIN_NUM = crate::Reg<din_num::DIN_NUM_SPEC>;
#[doc = "SPI input delay number configuration"]
pub mod din_num;
#[doc = "DOUT_MODE (rw) register accessor: an alias for `Reg<DOUT_MODE_SPEC>`"]
pub type DOUT_MODE = crate::Reg<dout_mode::DOUT_MODE_SPEC>;
#[doc = "SPI output delay mode configuration"]
pub mod dout_mode;
#[doc = "DMA_CONF (rw) register accessor: an alias for `Reg<DMA_CONF_SPEC>`"]
pub type DMA_CONF = crate::Reg<dma_conf::DMA_CONF_SPEC>;
#[doc = "SPI DMA control register"]
pub mod dma_conf;
#[doc = "DMA_INT_ENA (rw) register accessor: an alias for `Reg<DMA_INT_ENA_SPEC>`"]
pub type DMA_INT_ENA = crate::Reg<dma_int_ena::DMA_INT_ENA_SPEC>;
#[doc = "SPI DMA interrupt enable register"]
pub mod dma_int_ena;
#[doc = "DMA_INT_CLR (w) register accessor: an alias for `Reg<DMA_INT_CLR_SPEC>`"]
pub type DMA_INT_CLR = crate::Reg<dma_int_clr::DMA_INT_CLR_SPEC>;
#[doc = "SPI DMA interrupt clear register"]
pub mod dma_int_clr;
#[doc = "DMA_INT_RAW (rw) register accessor: an alias for `Reg<DMA_INT_RAW_SPEC>`"]
pub type DMA_INT_RAW = crate::Reg<dma_int_raw::DMA_INT_RAW_SPEC>;
#[doc = "SPI DMA interrupt raw register"]
pub mod dma_int_raw;
#[doc = "DMA_INT_ST (r) register accessor: an alias for `Reg<DMA_INT_ST_SPEC>`"]
pub type DMA_INT_ST = crate::Reg<dma_int_st::DMA_INT_ST_SPEC>;
#[doc = "SPI DMA interrupt status register"]
pub mod dma_int_st;
#[doc = "W0 (rw) register accessor: an alias for `Reg<W0_SPEC>`"]
pub type W0 = crate::Reg<w0::W0_SPEC>;
#[doc = "SPI CPU-controlled buffer0"]
pub mod w0;
#[doc = "W1 (rw) register accessor: an alias for `Reg<W1_SPEC>`"]
pub type W1 = crate::Reg<w1::W1_SPEC>;
#[doc = "SPI CPU-controlled buffer1"]
pub mod w1;
#[doc = "W2 (rw) register accessor: an alias for `Reg<W2_SPEC>`"]
pub type W2 = crate::Reg<w2::W2_SPEC>;
#[doc = "SPI CPU-controlled buffer2"]
pub mod w2;
#[doc = "W3 (rw) register accessor: an alias for `Reg<W3_SPEC>`"]
pub type W3 = crate::Reg<w3::W3_SPEC>;
#[doc = "SPI CPU-controlled buffer3"]
pub mod w3;
#[doc = "W4 (rw) register accessor: an alias for `Reg<W4_SPEC>`"]
pub type W4 = crate::Reg<w4::W4_SPEC>;
#[doc = "SPI CPU-controlled buffer4"]
pub mod w4;
#[doc = "W5 (rw) register accessor: an alias for `Reg<W5_SPEC>`"]
pub type W5 = crate::Reg<w5::W5_SPEC>;
#[doc = "SPI CPU-controlled buffer5"]
pub mod w5;
#[doc = "W6 (rw) register accessor: an alias for `Reg<W6_SPEC>`"]
pub type W6 = crate::Reg<w6::W6_SPEC>;
#[doc = "SPI CPU-controlled buffer6"]
pub mod w6;
#[doc = "W7 (rw) register accessor: an alias for `Reg<W7_SPEC>`"]
pub type W7 = crate::Reg<w7::W7_SPEC>;
#[doc = "SPI CPU-controlled buffer7"]
pub mod w7;
#[doc = "W8 (rw) register accessor: an alias for `Reg<W8_SPEC>`"]
pub type W8 = crate::Reg<w8::W8_SPEC>;
#[doc = "SPI CPU-controlled buffer8"]
pub mod w8;
#[doc = "W9 (rw) register accessor: an alias for `Reg<W9_SPEC>`"]
pub type W9 = crate::Reg<w9::W9_SPEC>;
#[doc = "SPI CPU-controlled buffer9"]
pub mod w9;
#[doc = "W10 (rw) register accessor: an alias for `Reg<W10_SPEC>`"]
pub type W10 = crate::Reg<w10::W10_SPEC>;
#[doc = "SPI CPU-controlled buffer10"]
pub mod w10;
#[doc = "W11 (rw) register accessor: an alias for `Reg<W11_SPEC>`"]
pub type W11 = crate::Reg<w11::W11_SPEC>;
#[doc = "SPI CPU-controlled buffer11"]
pub mod w11;
#[doc = "W12 (rw) register accessor: an alias for `Reg<W12_SPEC>`"]
pub type W12 = crate::Reg<w12::W12_SPEC>;
#[doc = "SPI CPU-controlled buffer12"]
pub mod w12;
#[doc = "W13 (rw) register accessor: an alias for `Reg<W13_SPEC>`"]
pub type W13 = crate::Reg<w13::W13_SPEC>;
#[doc = "SPI CPU-controlled buffer13"]
pub mod w13;
#[doc = "W14 (rw) register accessor: an alias for `Reg<W14_SPEC>`"]
pub type W14 = crate::Reg<w14::W14_SPEC>;
#[doc = "SPI CPU-controlled buffer14"]
pub mod w14;
#[doc = "W15 (rw) register accessor: an alias for `Reg<W15_SPEC>`"]
pub type W15 = crate::Reg<w15::W15_SPEC>;
#[doc = "SPI CPU-controlled buffer15"]
pub mod w15;
#[doc = "SLAVE (rw) register accessor: an alias for `Reg<SLAVE_SPEC>`"]
pub type SLAVE = crate::Reg<slave::SLAVE_SPEC>;
#[doc = "SPI slave control register"]
pub mod slave;
#[doc = "SLAVE1 (rw) register accessor: an alias for `Reg<SLAVE1_SPEC>`"]
pub type SLAVE1 = crate::Reg<slave1::SLAVE1_SPEC>;
#[doc = "SPI slave control register 1"]
pub mod slave1;
#[doc = "CLK_GATE (rw) register accessor: an alias for `Reg<CLK_GATE_SPEC>`"]
pub type CLK_GATE = crate::Reg<clk_gate::CLK_GATE_SPEC>;
#[doc = "SPI module clock and register clock control"]
pub mod clk_gate;
#[doc = "DATE (rw) register accessor: an alias for `Reg<DATE_SPEC>`"]
pub type DATE = crate::Reg<date::DATE_SPEC>;
#[doc = "Version control"]
pub mod date;