#[doc = "Register `PERIP_CLK_EN0` reader"]
pub struct R(crate::R<PERIP_CLK_EN0_SPEC>);
impl core::ops::Deref for R {
type Target = crate::R<PERIP_CLK_EN0_SPEC>;
#[inline(always)]
fn deref(&self) -> &Self::Target {
&self.0
}
}
impl From<crate::R<PERIP_CLK_EN0_SPEC>> for R {
#[inline(always)]
fn from(reader: crate::R<PERIP_CLK_EN0_SPEC>) -> Self {
R(reader)
}
}
#[doc = "Register `PERIP_CLK_EN0` writer"]
pub struct W(crate::W<PERIP_CLK_EN0_SPEC>);
impl core::ops::Deref for W {
type Target = crate::W<PERIP_CLK_EN0_SPEC>;
#[inline(always)]
fn deref(&self) -> &Self::Target {
&self.0
}
}
impl core::ops::DerefMut for W {
#[inline(always)]
fn deref_mut(&mut self) -> &mut Self::Target {
&mut self.0
}
}
impl From<crate::W<PERIP_CLK_EN0_SPEC>> for W {
#[inline(always)]
fn from(writer: crate::W<PERIP_CLK_EN0_SPEC>) -> Self {
W(writer)
}
}
#[doc = "Field `SPI01_CLK_EN` reader - Set 1 to enable SPI01 clock"]
pub type SPI01_CLK_EN_R = crate::BitReader<bool>;
#[doc = "Field `SPI01_CLK_EN` writer - Set 1 to enable SPI01 clock"]
pub type SPI01_CLK_EN_W<'a, const O: u8> = crate::BitWriter<'a, u32, PERIP_CLK_EN0_SPEC, bool, O>;
#[doc = "Field `UART_CLK_EN` reader - Set 1 to enable UART clock"]
pub type UART_CLK_EN_R = crate::BitReader<bool>;
#[doc = "Field `UART_CLK_EN` writer - Set 1 to enable UART clock"]
pub type UART_CLK_EN_W<'a, const O: u8> = crate::BitWriter<'a, u32, PERIP_CLK_EN0_SPEC, bool, O>;
#[doc = "Field `UART1_CLK_EN` reader - Set 1 to enable UART1 clock"]
pub type UART1_CLK_EN_R = crate::BitReader<bool>;
#[doc = "Field `UART1_CLK_EN` writer - Set 1 to enable UART1 clock"]
pub type UART1_CLK_EN_W<'a, const O: u8> = crate::BitWriter<'a, u32, PERIP_CLK_EN0_SPEC, bool, O>;
#[doc = "Field `SPI2_CLK_EN` reader - Set 1 to enable SPI2 clock"]
pub type SPI2_CLK_EN_R = crate::BitReader<bool>;
#[doc = "Field `SPI2_CLK_EN` writer - Set 1 to enable SPI2 clock"]
pub type SPI2_CLK_EN_W<'a, const O: u8> = crate::BitWriter<'a, u32, PERIP_CLK_EN0_SPEC, bool, O>;
#[doc = "Field `I2C_EXT0_CLK_EN` reader - Set 1 to enable I2C_EXT0 clock"]
pub type I2C_EXT0_CLK_EN_R = crate::BitReader<bool>;
#[doc = "Field `I2C_EXT0_CLK_EN` writer - Set 1 to enable I2C_EXT0 clock"]
pub type I2C_EXT0_CLK_EN_W<'a, const O: u8> =
crate::BitWriter<'a, u32, PERIP_CLK_EN0_SPEC, bool, O>;
#[doc = "Field `LEDC_CLK_EN` reader - Set 1 to enable LEDC clock"]
pub type LEDC_CLK_EN_R = crate::BitReader<bool>;
#[doc = "Field `LEDC_CLK_EN` writer - Set 1 to enable LEDC clock"]
pub type LEDC_CLK_EN_W<'a, const O: u8> = crate::BitWriter<'a, u32, PERIP_CLK_EN0_SPEC, bool, O>;
#[doc = "Field `TIMERGROUP_CLK_EN` reader - Set 1 to enable TIMERGROUP clock"]
pub type TIMERGROUP_CLK_EN_R = crate::BitReader<bool>;
#[doc = "Field `TIMERGROUP_CLK_EN` writer - Set 1 to enable TIMERGROUP clock"]
pub type TIMERGROUP_CLK_EN_W<'a, const O: u8> =
crate::BitWriter<'a, u32, PERIP_CLK_EN0_SPEC, bool, O>;
#[doc = "Field `UART_MEM_CLK_EN` reader - Set 1 to enable UART_MEM clock"]
pub type UART_MEM_CLK_EN_R = crate::BitReader<bool>;
#[doc = "Field `UART_MEM_CLK_EN` writer - Set 1 to enable UART_MEM clock"]
pub type UART_MEM_CLK_EN_W<'a, const O: u8> =
crate::BitWriter<'a, u32, PERIP_CLK_EN0_SPEC, bool, O>;
#[doc = "Field `APB_SARADC_CLK_EN` reader - Set 1 to enable APB_SARADC clock"]
pub type APB_SARADC_CLK_EN_R = crate::BitReader<bool>;
#[doc = "Field `APB_SARADC_CLK_EN` writer - Set 1 to enable APB_SARADC clock"]
pub type APB_SARADC_CLK_EN_W<'a, const O: u8> =
crate::BitWriter<'a, u32, PERIP_CLK_EN0_SPEC, bool, O>;
#[doc = "Field `SYSTIMER_CLK_EN` reader - Set 1 to enable SYSTEMTIMER clock"]
pub type SYSTIMER_CLK_EN_R = crate::BitReader<bool>;
#[doc = "Field `SYSTIMER_CLK_EN` writer - Set 1 to enable SYSTEMTIMER clock"]
pub type SYSTIMER_CLK_EN_W<'a, const O: u8> =
crate::BitWriter<'a, u32, PERIP_CLK_EN0_SPEC, bool, O>;
#[doc = "Field `ADC2_ARB_CLK_EN` reader - Set 1 to enable ADC2_ARB clock"]
pub type ADC2_ARB_CLK_EN_R = crate::BitReader<bool>;
#[doc = "Field `ADC2_ARB_CLK_EN` writer - Set 1 to enable ADC2_ARB clock"]
pub type ADC2_ARB_CLK_EN_W<'a, const O: u8> =
crate::BitWriter<'a, u32, PERIP_CLK_EN0_SPEC, bool, O>;
impl R {
#[doc = "Bit 1 - Set 1 to enable SPI01 clock"]
#[inline(always)]
pub fn spi01_clk_en(&self) -> SPI01_CLK_EN_R {
SPI01_CLK_EN_R::new(((self.bits >> 1) & 1) != 0)
}
#[doc = "Bit 2 - Set 1 to enable UART clock"]
#[inline(always)]
pub fn uart_clk_en(&self) -> UART_CLK_EN_R {
UART_CLK_EN_R::new(((self.bits >> 2) & 1) != 0)
}
#[doc = "Bit 5 - Set 1 to enable UART1 clock"]
#[inline(always)]
pub fn uart1_clk_en(&self) -> UART1_CLK_EN_R {
UART1_CLK_EN_R::new(((self.bits >> 5) & 1) != 0)
}
#[doc = "Bit 6 - Set 1 to enable SPI2 clock"]
#[inline(always)]
pub fn spi2_clk_en(&self) -> SPI2_CLK_EN_R {
SPI2_CLK_EN_R::new(((self.bits >> 6) & 1) != 0)
}
#[doc = "Bit 7 - Set 1 to enable I2C_EXT0 clock"]
#[inline(always)]
pub fn i2c_ext0_clk_en(&self) -> I2C_EXT0_CLK_EN_R {
I2C_EXT0_CLK_EN_R::new(((self.bits >> 7) & 1) != 0)
}
#[doc = "Bit 11 - Set 1 to enable LEDC clock"]
#[inline(always)]
pub fn ledc_clk_en(&self) -> LEDC_CLK_EN_R {
LEDC_CLK_EN_R::new(((self.bits >> 11) & 1) != 0)
}
#[doc = "Bit 13 - Set 1 to enable TIMERGROUP clock"]
#[inline(always)]
pub fn timergroup_clk_en(&self) -> TIMERGROUP_CLK_EN_R {
TIMERGROUP_CLK_EN_R::new(((self.bits >> 13) & 1) != 0)
}
#[doc = "Bit 24 - Set 1 to enable UART_MEM clock"]
#[inline(always)]
pub fn uart_mem_clk_en(&self) -> UART_MEM_CLK_EN_R {
UART_MEM_CLK_EN_R::new(((self.bits >> 24) & 1) != 0)
}
#[doc = "Bit 28 - Set 1 to enable APB_SARADC clock"]
#[inline(always)]
pub fn apb_saradc_clk_en(&self) -> APB_SARADC_CLK_EN_R {
APB_SARADC_CLK_EN_R::new(((self.bits >> 28) & 1) != 0)
}
#[doc = "Bit 29 - Set 1 to enable SYSTEMTIMER clock"]
#[inline(always)]
pub fn systimer_clk_en(&self) -> SYSTIMER_CLK_EN_R {
SYSTIMER_CLK_EN_R::new(((self.bits >> 29) & 1) != 0)
}
#[doc = "Bit 30 - Set 1 to enable ADC2_ARB clock"]
#[inline(always)]
pub fn adc2_arb_clk_en(&self) -> ADC2_ARB_CLK_EN_R {
ADC2_ARB_CLK_EN_R::new(((self.bits >> 30) & 1) != 0)
}
}
impl W {
#[doc = "Bit 1 - Set 1 to enable SPI01 clock"]
#[inline(always)]
#[must_use]
pub fn spi01_clk_en(&mut self) -> SPI01_CLK_EN_W<1> {
SPI01_CLK_EN_W::new(self)
}
#[doc = "Bit 2 - Set 1 to enable UART clock"]
#[inline(always)]
#[must_use]
pub fn uart_clk_en(&mut self) -> UART_CLK_EN_W<2> {
UART_CLK_EN_W::new(self)
}
#[doc = "Bit 5 - Set 1 to enable UART1 clock"]
#[inline(always)]
#[must_use]
pub fn uart1_clk_en(&mut self) -> UART1_CLK_EN_W<5> {
UART1_CLK_EN_W::new(self)
}
#[doc = "Bit 6 - Set 1 to enable SPI2 clock"]
#[inline(always)]
#[must_use]
pub fn spi2_clk_en(&mut self) -> SPI2_CLK_EN_W<6> {
SPI2_CLK_EN_W::new(self)
}
#[doc = "Bit 7 - Set 1 to enable I2C_EXT0 clock"]
#[inline(always)]
#[must_use]
pub fn i2c_ext0_clk_en(&mut self) -> I2C_EXT0_CLK_EN_W<7> {
I2C_EXT0_CLK_EN_W::new(self)
}
#[doc = "Bit 11 - Set 1 to enable LEDC clock"]
#[inline(always)]
#[must_use]
pub fn ledc_clk_en(&mut self) -> LEDC_CLK_EN_W<11> {
LEDC_CLK_EN_W::new(self)
}
#[doc = "Bit 13 - Set 1 to enable TIMERGROUP clock"]
#[inline(always)]
#[must_use]
pub fn timergroup_clk_en(&mut self) -> TIMERGROUP_CLK_EN_W<13> {
TIMERGROUP_CLK_EN_W::new(self)
}
#[doc = "Bit 24 - Set 1 to enable UART_MEM clock"]
#[inline(always)]
#[must_use]
pub fn uart_mem_clk_en(&mut self) -> UART_MEM_CLK_EN_W<24> {
UART_MEM_CLK_EN_W::new(self)
}
#[doc = "Bit 28 - Set 1 to enable APB_SARADC clock"]
#[inline(always)]
#[must_use]
pub fn apb_saradc_clk_en(&mut self) -> APB_SARADC_CLK_EN_W<28> {
APB_SARADC_CLK_EN_W::new(self)
}
#[doc = "Bit 29 - Set 1 to enable SYSTEMTIMER clock"]
#[inline(always)]
#[must_use]
pub fn systimer_clk_en(&mut self) -> SYSTIMER_CLK_EN_W<29> {
SYSTIMER_CLK_EN_W::new(self)
}
#[doc = "Bit 30 - Set 1 to enable ADC2_ARB clock"]
#[inline(always)]
#[must_use]
pub fn adc2_arb_clk_en(&mut self) -> ADC2_ARB_CLK_EN_W<30> {
ADC2_ARB_CLK_EN_W::new(self)
}
#[doc = "Writes raw bits to the register."]
#[inline(always)]
pub unsafe fn bits(&mut self, bits: u32) -> &mut Self {
self.0.bits(bits);
self
}
}
#[doc = "peripheral clock gating register\n\nThis register you can [`read`](crate::generic::Reg::read), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [perip_clk_en0](index.html) module"]
pub struct PERIP_CLK_EN0_SPEC;
impl crate::RegisterSpec for PERIP_CLK_EN0_SPEC {
type Ux = u32;
}
#[doc = "`read()` method returns [perip_clk_en0::R](R) reader structure"]
impl crate::Readable for PERIP_CLK_EN0_SPEC {
type Reader = R;
}
#[doc = "`write(|w| ..)` method takes [perip_clk_en0::W](W) writer structure"]
impl crate::Writable for PERIP_CLK_EN0_SPEC {
type Writer = W;
const ZERO_TO_MODIFY_FIELDS_BITMAP: Self::Ux = 0;
const ONE_TO_MODIFY_FIELDS_BITMAP: Self::Ux = 0;
}
#[doc = "`reset()` method sets PERIP_CLK_EN0 to value 0x7100_2066"]
impl crate::Resettable for PERIP_CLK_EN0_SPEC {
const RESET_VALUE: Self::Ux = 0x7100_2066;
}